"Fabrication and Studying the Mechanical Properties of A356 Alloy Reinforced with Al2O3-10% Vol. ZrO2 Nano-particles through Stir Casting"
written by Mohsen Hajizamani, Hamidreza Baharvandi,
published by Advances in Materials Physics and Chemistry, Vol.1 No.2, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] بررسي ريزساختار و خواص مكانيكي نانو كامپوزيت Al-SiC توليدشده به روش ريخته گري گردابي‎
[2] Analysing the Mechanical Properties and Corrosion Phenomenon of Reinforced Metal Matrix Composite
2020
[3] Influences of reinforcement and displacement rate on microstructure, mechanical properties and fracture behaviors of cylinder-head aluminum alloy
2020
[4] Synthesis of metal matrix composites through stir casting process–a review
2020
[5] Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix
2020
[6] Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route
2019
[7] Investigation of Mechanical Properties of A6082-ZrO2-SiC Hybrid Composite by Stir and Squeeze Casting
2019
[8] Enhancing the mechanical and tribological properties of solid cylindrical aluminum specimen by reinforcing alumina nanoparticulate through centrifuge casting …
2019
[9] Review on Aluminium Silicon Carbide Metal Matrix Composite
International Journal of Engineering Research & Technology (IJERT), 2019
[10] PREPARATION OF NEW ALUMINUM MATRIX COMPOSITE REINFORCED WITH HYBRID NANO REINFORCEMENTS FE2O3 AND AL2O3 VIA (P/M) ROUTE
2019
[11] Investigation of Mechanical Properties of A6082-ZrO2-SiC Hybrid Composite
2019
[12] Improvement of Mechanical and Fatigue Properties for Aluminum Alloy 7049 By Using Nano Composites Technique
2019
[13] Using anthropogenic waste (steel slag) to enhance mechanical and wear properties of a commercial aluminium alloy A356
2019
[14] Synthesis of AA2024-(SiO2np+ TiO2np) hybrid nanocomposite via stir casting process
2019
[15] An Investigation of Alumina Reinforcement Effect on Mechanical Properties of Al 356 Based Metal Matrix Composite
2019
[16] Microstructural development in nanostructured AlCoCrFeNi–ZrO2 high-entropy alloy composite prepared with mechanical alloying and spark plasma sintering …
2019
[17] A Review on Wear Analysis of Aluminium Based Metal Matrix Composites
International Journal of Applied Engineering Research, 2018
[18] Aluminium Metal Matrix Composite with Zirconium diboride Reinforcement: A Review
Materials Today: Proceedings, 2018
[19] Influence of casting mould wall thickness on the properties and microstructure of A356 alloy reinforced with micro/nanoalumina particles
Actic Journal, 2018
[20] Synthesis of metal matrix composites through stir casting process-a review
2018
[21] Compressive and tensile deformation behaviour of TRIP steel-matrix composite materials with reinforcing additions of zirconia and/or aluminium titanate
Journal of Alloys and Compounds, 2017
[22] Modification of microstructure and mechanical properties of Al–Zn–Mg/3 wt.% Al2O3 composite through semi-solid thermomechanical processing using variable loads
2017
[23] A review on multiple responses process parameters optimization of turning Al-TiCp metal matrix composites
Journal of Achievements in Materials and Manufacturing Engineering, 2017
[24] Effects of Electromagnetic Frequency and SiC Nanoparticles on the Microstructure Refinement and Mechanical Properties of Al A357-1.5 wt% SiC Nanocomposites
International Journal of Metalcasting, 2017
[25] Modification of microstructure and mechanical properties of Al–Zn–Mg/3 wt.% Al2O3 composite through semi-solid thermomechanical processing using variable …
2017
[26] Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling
Ceramics International, 2016
[27] Preparation and characterization of A356 composite reinforced with SiC nano- and microparticles by stir casting method
2016
[28] SYNTHESIS AND EVALUATION OF MECHANICAL PROPERTIES OF ALUMINIUM A356 ALLOY REINFORCED WITH MICA AND TITANIUM DI OXIDE HYBRID COMPOSITE AT DIFFERENT AGING CONDITIONS
International Journal of Advanced Research in Engineering and Applied Sciences, 2016
[29] تولید و مشخصه یابی کامپوزیت A356 تقویت‌شده با ذرات نانو و میکرومتری SiC به روش ریخته گری گردابی‎
Modares Mechanical Engineering, 2016
[30] بررسی ریزساختار و خواص مکانیکی نانو کامپوزیت Al-SiC تولیدشده به روش ریخته گری گردابی‎
2016
[31] Preparation and characterization of A356 composite reinforced with SiC nano-and microparticles by stir casting method
Modares Mechanical Engineering, 2016
[32] Evaluation of the microstructure and mechanical properties of Al-SiC nanocomposite fabricated by stir casting
Modares Mechanical Engineering, 2016
[33] Evaluation of Mechanical Properties of A-356 Aluminium Alloy Reinforced with Graphite, Boron Carbide and Fly Ash Hybrid Metal Matrix Composite
2016
[34] Evaluation the microstructure and mechanical properties of Al-SiC nanocomposite fabricated by stir casting
2016
[35] Aluminium-based metal matrix composites by stir casting: a literature review
International Journal of Materials Engineering Innovation, 2016
[36] Effect of B 4 C, TiB 2 and ZrSiO 4 ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling
Ceramics International, 2016
[37] Microstructure and mechanical properties of Al-nano/micro SiC composites produced by stir casting technique
Materials Science and Engineering: A, 2016
[38] بررسی ریزساختار و خواص مکانیکی نانو کامپوزیتAl-SiC تولیدشده به روش ریخته‌گری گردابی‎
مهندسی مکانیک مدرس, 2015
[39] Investigation of Corrosion Behavior of Light Weight NanoHybrid Al 6061-ZrO2–SiC-Gr Composites
International Journal of ChemTech Research, 2015
[40] A Review on Effect of Reinforcement Particles on the Mechanical Properties of Aluminium Based Composites
International Journal of Innovative Research in Science, Engineering and Technology, 2015
[41] Effect of Steel Slag on the Impact Strength of Aluminium Metal Matrix Composite
Applied Mechanics and Materials, 2015
[42] Fabrication of Al5083/TiO2 surface composite by friction stir process and investigating its microstructural, mechanical and wear properties
2015
[43] Wear Analysis of Aluminium Based Composites by Stir Casting Process: A
2015
[44] EFFECT OF STEEL SLAG ON THE IMPACT STRENGTH OF ALUMINIUM METAL MATRIX COMPOSITE.
2015
[45] Effect of T6 heat treatment in the microstructure and mechanical properties of A356 reinforced with nano Al2O3 particles by combination effect of stir and squeeze …
Procedia Materials Science, 2014
[46] Improvements in microstructure and mechanical properties of Al–Si–Cu alloy–Al2O3 nanocomposite modified by ZrO2
Journal of Materials Research, 2014
[47] Effect of T6 Heat Treatment in the Microstructure and Mechanical Properties of A356 Reinforced with Nano Al2O3 Particles by Combination Effect of Stir and Squeeze Casting
Procedia Materials Science, 2014
[48] Corrosive Wear Properties of Al-Mn Eutectic Alloy Reinforced by Al_2O_3 Particle
2013
[49] Al2O3 颗粒增强共晶铝锰基复合材料的腐蚀磨损性能
材料工程, 2013
[50] IhWESTIGATION OF PERFORMANCE
2012
[51] Ê| ÀÆ»® Ì¿ Z»