Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Evaluation of Mechanical and Microstructural Properties of α-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process"
written by Edward E. Igelegbai, Oluwaseun A. Alo, Adefemi O. Adeodu, Ilesanmi A. Daniyan,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, 2017
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Impacts of tin and germanium on corrosion and erosion-corrosion behavior of 60Cu–40Zn alloys
AIP Conference Proceedings, 2022
[2] Evaluation of Steel and Tungsten Carbide Cobalt (WC 8Co) 5.56 x 45 mm Caliber Projectile Penetration into Silicon Carbide (SiC) Experiment and Numerical …
Defence Science …, 2022
[3] Corrosion of Brass Fishing Vessel Propeller in Artificial Seawater
Journal of Industrial …, 2022
[4] Influence of Alloying Element and Ageing on Microstructure and Dry Sliding Wear Behaviour of Cu-Zn-xNi Alloy
Journal of Mines …, 2022
[5] Mikrostrukturna analiza CuAlMn legure s prisjetljivosti oblika
2022
[6] Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion
2021
[7] Brass Wire Forming By Friction Stir Back Extrusion: Numerical Modeling and Experiment
2021
[8] Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method
2021
[9] Process Design, Development and Mechanical Analysis of Cu-Zn Alloy Produced by Sand Casting Process
2021
[10] Evaluation of Dihedral Angle Twin Boundaries in Cu10 wt% Zn Alloy Using Atomic Force Microscopy
2021
[11] RESEARCH PAPER IMPACT OF COLD PLASTIC DEFORMATION AND THERMAL POST-TREATMENT ON THE PHYSICAL PROPERTIES OF COPPER …
ACTA METALLURGICA SLOVACA, 2021
[12] Investigations of microstructure and mechanical properties of brass alloys produced by sand casting method at different casting temperatures
2020
[13] A comparative study of chemical and physical properties of copper and copper alloys affected by acidic, alkaline and saline environments
2020
[14] Influence of Aluminium and Zinc Additives on the Physical and Thermal Behaviour of Cast Copper
2020
[15] Archaeometric study of the historic terrazzo pavement of Prince Mohamed Ali Museum, Cairo, Egypt
2020
[16] Physical Behaviour of Thermally Affected Bronze and Brass
2020
[17] Analysis of the Absorption Phenomenon Through the Use of Finite Element Method
2019
[18] Metal analysis of horse bits using X-ray fluorescence (XRF)
2019
[19] The Influence of the Precipitation Heat Treatment Temperature on the Metallurgical, Microstructure, Thermal Properties, and Microhardness of an Alpha Brass
2018
[20] Effect of Growth Velocity and Zn Content on Microhardness in Directionally Solidified Al-Zn Alloys
2018
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top