"Applications of Ultrasonic Techniques in Oil and Gas Pipeline Industries: A Review"
written by Wissam M. Alobaidi, Entidhar A. Alkuam, Hussain M. Al-Rizzo, Eric Sandgren,
published by American Journal of Operations Research, Vol.5 No.4, 2015
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Detection of cracks with arbitrary orientations in a metal pipe using linearly-polarized circular TE11 mode microwaves
2019
[2] Acoustic guided wave techniques for detecting corrosion damage of electrical grounding rods
2019
[3] The Design, Construction and Testing of an Intelligent Device for Coating Flaws and Crack Detection in Pipelines
2019
[4] Deep Learning Techniques for Magnetic Flux Leakage Inspection with Uncertainty Quantification
2019
[5] Researching on Measurement Strategies of Fuel Tank Corrosion Using Phased Array Technology
2019
[6] ABC-UTC Guideline for
2019
[7] NDT Inspection of Critical ABC Details to Assure Life Cycle Performance and Avoid Future Unforeseen Excessive Repairs
2019
[8] Design and Validation of an Articulated Sensor Carrier to Improve the Automatic Pipeline Inspection
2019
[9] Digital Eye Strain and Fatigue Recognition Using Electrooculogram Signals and Ultrasonic Distance Measurements
2018
[10] Concept on Internet of things (Iot) sensors based non-Destructive Evaluation Technique (NDE)
2018
[11] Experimental Evaluation of Novel Hybrid Microwave/Ultrasonic Technique to Locate and Characterize Pipe Wall Thinning
2018
[12] Development of an Optimized Neural Network for the Detection of Pipe Defects Using a Microwave Signal
2018
[13] FPGA-Based Data Storage System on NAND Flash Memory in RAID 6 Architecture for In-Line Pipeline Inspection Gauges
2018
[14] Improvement of Ultrasonic Pulse Generator for Automatic Pipeline Inspection
Sensors, 2018
[15] Estimation of time-of-flight based on threshold and peak analysis method for microwaves signals reflected from the crack
Nondestructive Testing And Evaluation, 2018
[16] Discontinuity inspection in pipelines: A comparison review
Measurement, 2017
[17] Inspection of the Petroleum Pipelines Welded Joint by Using the Phased Array Ultrasonic Nondestructive Testing.
Petroleum - Gas University of Ploiesti Bulletin, Technical Series, 2017
[18] Service innovation for a sustainable fuel supply using cyber physical social system technology
2017
[19] Measurement of Pipe Strain Using an Ultrasonic System
International Journal of Current Science, Engineering & Technology, 2017
[20] Application of Microwave and Ultrasonic Techniques for Defect Detection in Pipes
ProQuest Dissertations Publishing, 2017
[21] Towards high accuracy measurements for gas flow rate using ultrasonic devices in oil fields
2017
[22] Ultrasonic thickness structural health monitoring of steel pipe for internal corrosion
ProQuest Dissertations Publishing, 2017
[23] Non-immersive Ultrasound Scanning and Inspection of Internal Defects Using a Water Droplet Coupling Device
Journal of Nondestructive Evaluation, 2016
[24] Classification of the Extent of Wall Thinning in Pipes Based on Simulations in the Time and Frequency Domain
2016
[25] High-Efficiency Remote Measurement of Pipe Defect Using RF/UT Technologies: A Theoretical Analysis Part One—Straight Beam UT
2016
[26] Waveform Pattern Recognition Applied to Rapid Detection of Wall-Thinning in Pipes: A Simulation-Based Case Study
2016
[27] Research on design and construction of directional drilling of Shen-Wei coal pipeline
2016
[28] Detection of Defects in Spiral/Helical Pipes Using RF Technology
2016
[29] Enhancing Production Efficiency of Oil and Natural Gas Pipes Using Microwave Technology
Energy and Power Engineering, 2015
[30] NDT Applied to the Detection of Defects in Oil and Gas Pipes: A Simulation-Based Study
ASME 2015 International Mechanical Engineering Congress and Exposition, 2015