Numerical Simulation of Decarburization in a Top-Blown Basic Oxygen Furnace

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Modeling and Numerical Simulation of Material Science

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.org/journal/mnsms
E-mail: mnsms@scirp.org

Google-based Impact Factor: 0.7
Citations h5-index & Ranking*

Journals Menu

"Numerical Simulation of Decarburization in a Top-Blown Basic Oxygen Furnace"
written by Miguel A. Barron, Dulce Y. Medina, Isaias Hilerio,
published by Modeling and Numerical Simulation of Material Science, Vol.4 No.3, 2014

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Contribution of Hot-Spot Zone in Decarburization of BOF Steel-Making: Fundamental Analysis Based upon the FactSage-Macro Program
	Metals, 2022

[2]	CO Desorption and Absorption in Molten Steel: A Review
	2021

[3]	Predicción de la temperatura del arrabio en la acería y evaluación de su impacto en las emisiones de CO2 mediante el desarrollo conjunto de procesos y modelos
	2020

[4]	基于熔池混匀度的转炉烟气分析定碳模型
	2018

[5]	Carbon prediction model for basic oxygen furnace off-gas analysis based on bath mixing degree
	hui, CAO Ling-ling, LIU Qing… - 工程科学 …, 2018

[6]	Model for Phosphorus Removal in LD Converter and Design of a Valuable Operative Practice
	steel research international, 2018

[7]	Thermal and chemical analysis of massive use of hot briquetted iron inside basic oxygen furnace
	Journal of Iron and Steel Research, International, 2017

[8]	Model for the final decarburisation of the steel bath through a self-bubbling effect
	American Journal of Sexuality Education, 2017

[9]	Thermodynamische und kinetische Modellierung von LD-Konvertern
	2017

[10]	Řízení chemického ohřevu během sekundárního zpracování oceli
	2015

[11]	?íZENí CHEMICKéHO OH?EVU BěHEM SEKUNDáRNíHO ZPRACOVáNí OCELI
	2015

[12]	ŘÍZENÍ CHEMICKÉHO OHŘEVU BĚHEM SEKUNDÁRNÍHO

[1]	Contribution of Hot-Spot Zone in Decarburization of BOF Steel-Making: Fundamental Analysis Based upon the FactSage-Macro Program Metals, 2022 DOI:10.3390/met12040638

[2]	CO Desorption and Absorption in Molten Steel: A Review ISIJ International, 2021 DOI:10.2355/isijinternational.ISIJINT-2020-509

[3]	Model for the final decarburisation of the steel bath through a self-bubbling effect Ironmaking & Steelmaking, 2017 DOI:10.1080/03019233.2017.1405179

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Modeling and Numerical Simulation of Material Science

Modeling and Numerical Simulation of Material Science

Journals Menu

Home

About SCIRP

Service

Policies