Engineering

Engineering

ISSN Print: 1947-3931
ISSN Online: 1947-394X
www.scirp.org/journal/eng
E-mail: eng@scirp.org
"Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study"
written by Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos,
published by Engineering, Vol.3 No.2, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Multi Objective Optimization of Joining Dissimilar AA5083& AA6061 Alloys Using Friction Stir Welding-Integrated Taguchi and Grey Systems Approach
2020
[2] Optimization of Process Parameters Using Taguchi for Friction Stir Welding of Dissimilar Aluminum Alloys
2020
[3] Experimental Investigation on Strength of Friction Stir Welded Al 6061-T6 Alloy Joints with Varying Oblique Angle
2020
[4] Friction stir processing (FSP) of numerical study based on design of experiment-review
2019
[5] Experimental Investigations on AA 6061 Alloy Welded Joints by Friction Stir Welding
2019
[6] A Coupled Rigid-viscoplastic Numerical Modeling for Evaluating Effects of Shoulder Geometry on Friction Stir-welded Aluminum Alloys
2019
[7] Effect of processing parameters on the strength of keyhole free friction stir spot aluminum welds
2019
[8] Using Multi Criteria Decision Making in Optimizing the Friction Stir Welding Process of Pipes: A Tool Pin Diameter Perspective
2019
[9] Review on Thermal Analysis of Friction Stir Welding of Aluminium 5083 Alloy
2019
[10] A frameless picture frame test with embedded sensor: Mitigation of imperfections in shear characterization of woven fabrics
2019
[11] Optimization of AA5083 friction stir welding parameters using Taguchi method
2018
[12] Engineering Science and Technology, an International Journal
2018
[13] A Novel Optimization of Friction Stir Welding Process Parameters on Aluminum Alloy 6061-T6
Materials Today: Proceedings, 2018
[14] Monitoring joint quality: Taguchi approach and structure investigation
Journal of Engineering, Design and Technology, 2018
[15] Micro Friction Stir Welding of Multilayer Aluminum Alloy Sheets
Journal of Materials Processing Technology, 2018
[16] Joining of automotive sheet materials by friction-based welding methods: A review
Engineering Science and Technology, an International Journal, 2018
[17] Influência da geometria da ferramenta na soldadura por fricção linear em ligas de alumínio AA 2017-T4
Dissertation, Open Repository of the University of Porto, 2018
[18] Friction stir welding process improvement through coupling an optimization procedure and three-dimensional transient heat transfer numerical analysis
Journal of Manufacturing Processes, 2018
[19] Joining of metal matrix composites using friction stir welding: a review
Materials and Manufacturing Processes, 2018
[20] Prediction of optimum welding parameters for FSW of aluminium alloys AA6063 and A319 using RSM and ANN
Materials Today: Proceedings, 2018
[21] INVESTIGATION ON THE EFFECT OF MECHANICAL VIBRATION IN MILD STEEL WELD POOL
2018
[22] An Overview of Optimization Techniques Used For Friction Stir Welding Process Parameters
2018
[23] Experimental and Numerical Studies of Friction Stir Welded Joints of Aluminium-alloy (AA5052-H32) Plates
2017
[24] Review paper on optimization of friction stir welding process parameters
International Journal of Engineering Research and Technology, 2017
[25] Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die
Journal of Manufacturing Processes, 2017
[26] Journal of Manufacturing Processes
2017
[27] Investigation of Friction Stir Welding Parameters of 5083 Aluminum Alloy by Taguchi Method
International Journal of Engineering Technology Science and Research, 2017
[28] Zastosowanie metody Taguchi w spawalnictwie
2017
[29] quotExperimental and Numerical Studies of Friction Stir Welded Joints of Aluminium alloy AA5052 H32 Platesquot
2017
[30] Effect of process parameters on friction stir welding on Aluminium Alloy
2017
[31] An Overview of Friction Stir Welding Process and Parameters of Aluminium Alloys
2017
[32] Efeito da geometria da ferramenta no comportamento mecânico de ligações T dissimilares nas ligas AA5083 e AA6082, soldadas por fricção linear
2017
[33] Effect of friction stir welding on the tensile properties of AA6063 under different conditions
2017
[34] Application of Taguchi method in welding technology
2017
[35] Process parameter setting and optimization based on computer simulation
Acta Technica, 2017
[36] A simple and robust fuzzy-AHP-based Taguchi approach for multi-objective optimisation of welding process parameters
International Journal of Productivity and Quality Management, 2017
[37] Experimental Investigation of Friction Stir Welding of Aluminium Alloy AA7075 for Various Process Parameters
International Journal of Mechanics and Solids [IJM&S], 2017
[38] Thermo-Mechanical Modeling of Friction Stir Welding of Copper Plate
2017
[39] 3D scanning of artistically-derived GFRP tooling for the production of parametric manufacturing drawings of tub shower products
2017
[40] Evaluation of FSW Process Parameters of Dissimilar Aluminium Alloys
2016
[41] EFFECT OF PROCESS PARAMETERS ON TEMPERATURE DISTRIBUTION, STRAIN RATE AND FLOW-STRESS DURING FRICTION STIR WELDING OF ALUMINIUM ALLOY
International Journal of Research in Engineering and Technology, 2016
[42] Prediction of Optimum Welding Parameters for FSW of Aluminium alloys AA6063 and A319 using RSM and ANN
2016
[43] Optimization Of Process Parameters Of Friction Stir Welding By Using Doe
2016
[44] Structural life enhancement on friction stir welded AA6061 with optimized process and HFMI/PIT parameters
The International Journal of Advanced Manufacturing Technology, 2016
[45] A review of tool wear prediction during friction stir welding of aluminium matrix composite
Transactions of Nonferrous Metals Society of China, 2016
[46] Effect of the Tool Geometries on Thermal Analysis of the Friction Stir Welding
International Journal of Mechanics and Applications, 2016
[47] Low-cycle fatigue of dissimilar friction stir welded aluminum alloys
Materials Science and Engineering: A, 2016
[48] Effect of Taper Pin Ratio on Microstructure and Mechanical Property of Friction Stir Welded AZ31 Magnesium Alloy
World Academy of Science, Engineering and Technology, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 2016
[49] Effect of process parameters on temperature distribution, strain rate and flow-stress during friction stir welding of aluminum alloy
2016
[50] Effect of Taper Pin Ratio on AA7075 Aluminium Alloy Friction Stir Welding
Key Engineering Materials, 2016
[51] EFFECT OF TAPER PIN RATIO ON AA7075 ALUMINIUM ALLOY FRICTION STIR WELDING.
Key Engineering Materials, 2016
[52] EVALUATION OF PERFORMANCE OF FRICTION STIR WELDED AA2519-T87 ALUMINIUM ALLOY JOINTS
2016
[53] Mechanical Properties Of AA 6061-T6 Aluminum Alloy Friction Stir Welds
Journal of Engineering, 2015
[54] Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
IIW International Conference, 2015
[55] On experimental optimization of friction stir welding of aluminum 6061: understanding processing-microstructure-property relations
The International Journal of Advanced Manufacturing Technology, 2015
[56] Evaluation of dissimilar joints properties of 5083-H12 and 6061-T6 aluminum alloys produced by tungsten inert gas and friction stir welding
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2015
[57] Investigation of Friction Stir Welding parameters of 6063-7075 Aluminum alloys by Taguchi method
Procedia Materials Science, 2015
[58] Structure-property relationships of dissimilar friction stir welded aluminum alloys
ProQuest Dissertations Publishing, 2015
[59] Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloys
Materials & Design, 2015
[60] Taguchi optimization of process parameters in friction stir processing of pure Mg
Journal of Magnesium and Alloys, 2015
[61] A comprehensive review on modeling and optimization of friction stir welding
2014
[62] Dissimilar Metal Joining by Using Friction Stir Spot Welding
2014
[63] Friction stir welded butt joints optimization
Materialwissenschaft und Werkstofftechnik, 2014
[64] Friction stir welded T-joints optimization
Materials & Design, Elsevier, 2014
[65] An integrated multiphysics model for friction stir welding of 6061 Aluminum alloy
The International Journal of Multiphysics?, 2014
[66] Reduction in Finish Match Grinding Cycle Time of Valve Cone through Process Optimization
Applied Mechanics and Materials, 2014
[67] Friction stir welded butt joints optimization: Optimierung Reib‐Rühr‐geschweißter Stumpfstoßverbindungen
Materialwissenschaft und Werkstofftechnik, 2014
[68] Study and development of nature inspired algorithm for intelligent manufacturing systems
2014
[69] Predicting residual stresses in friction stir welding of aluminum alloy 6061 using an integrated multiphysics model
2014
[70] AA6082-T6 FRICTION STIR WELDED BUTT JOINTS OPTIMIZATION
2013
[71] Caraterização de Juntas de Alumínio Soldadas por Fricção Linear
Dissertation, Open Repository of the University of Porto, 2013
[72] Investigation of the effect of aging variables on the impact behaviour of Al 6061 alloy and its composites
Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in. IET, 2013., 2013
[73] Investigation on the Turning Parameters for Surface Roughness using Taguchi Analysis
Procedia Engineering, 2013
[74] Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding
Metallurgical and Materials Transactions A, 2013
[75] OPTIMIZAÇÃO DO PROCESSO SFL APLICANDO A METODOLOGIA TAGUCHI–EFEITOS DOS PARAMETROS NA TEMPERATURA
2013
[76] FEM Optimization of Process Parameters and In-Process Cooling in the Friction Stir Processing of Magnesium Alloy AZ31b
ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013., 2013
[77] Integrated multiphysics modeling, testing and optimization of friction stir welding of aluminum alloys
2013
[78] Modeling of Friction Stir Welding of AL7075 Using Neural Networks
International Journal of Applied Evolutionary Computation (IJAEC), 2012
[79] On Experimental and Numerical Predictions of Strain during Friction Stir Welding
Transaction on Control and Mechanical Systems, 2012
[80] Optimization of Superplastic Forming of Al6063/5% SiCp Composites Using Taguchi Experimental Design
International Review of Mechanical Engineering, 2012
[81] A New Approach to Measure Strain during Friction Stir Welding Using Visioplasticity
ASME 2011 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2011., 2011
[82] Statistical Regression-based Modeling of Friction Stir Welding of AL7075
Journal of Intelligent Computing Volume, 2011
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top