"Rheological Properties of Polymers: Structure and Morphology of Molten Polymer Blends"
written by Oluranti Sadiku-Agboola, Emmauel Rotimi Sadiku, Adesola Taoreed Adegbola, Olusesan Frank Biotidara,
published by Materials Sciences and Applications, Vol.2 No.1, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Prediction of rheological properties and interfacial tension of mixtures of immiscible polypropylene-polystyrene (PP3/PS) Blends
2020
[2] New approaches for the development of cellulose acetate/tetraethyl orthosilicate composite membranes: Rheological and microstructural analysis
2020
[3] Morphology, Rheology and Crystallization in Relation to the Viscosity Ratio of Polystyrene/Polypropylene Polymer Blends
2020
[4] The Role of a Succinyl Fluorescein-Succinic Anhydride Grafted Atactic Polypropylene on the Dynamic Mechanical Properties of Polypropylene/Polyamide-6 Blends at …
2020
[5] Melt Rheological Behavior and Morphology of Poly (ethylene oxide)/Natural Rubber-graft-Poly (methyl methacrylate) Blends
2020
[6] Influence of temperature dependence on the structural characteristics of polyoxymethylene/poly (lactic acid) blends by injection molding
2019
[7] FATORES INTERVENIENTES à VISCOSIDADE DE SOLU??ES POLIMéRICAS COM VISTAS àS FORMULA??ES DE FLUIDOS DE PERFURA??O E DO?TIPO DRILL-IN
2019
[8] Rheology of lightly-cured polydimethylsiloxane liquid blends
2019
[9] Industrial waste origin succinic anhydride‐grafted atactic polypropylene as compatibilizer of full range polypropylene/polyamide 6 blends as revealed by dynamic …
2019
[10] Development and Characterization of Polyvinyl Acetate/Soybeans Oil Copolymer Binder for Emulsion Paint
Chemistry Research Journal, 2019
[11] Síntese e caracterização de copolímeros PS-PDLA com diferentes arquiteturas e avaliação do seu efeito compatibilizante em blendas PS/PLA
2019
[12] Assessing Plastic Waste Usage as Additives in Flexible Asphalt Mix for Road Construction
2018
[13] Linseed oil as a natural modifier of rigid polyurethane foams
Industrial Crops and Products, 2018
[14] Formulations, development and characterization techniques of investment casting patterns
Reviews in Chemical Engineering, 2018
[15] Improvement of adhesive bonding of polypropylene and maleic anhydride grafted polypropylene blends to aluminium by means of addition of cyclic butylene …
The Journal of Adhesion, 2018
[16] Flow improvers for assured flow of crude oil in midstream pipeline-A review
Journal of Petroleum Science and Engineering, 2018
[17] Nuevas mezclas con base en polipropileno de baja viscosidad en fundido obtenidas mediante la adición de ciclobutilentereftalato.
DYNA-Ingeniería e Industria, 2018
[18] Estudio de la extrusión de mezclas de polietileno de alta densidad/polipropileno por medio de reo-velocimetría por imágenes de partículas
2018
[19] High Density Polyethylene/Libyan Kaolin Clay Nanocomposites: Effect of Clay Particle Size on Rheological, Surface and Mechanical Properties
2018
[20] The effects of natural polyphenols and calcium-based thermal stabilizer on the rheological and thermal resistance behaviors of PVC
International Journal of Plastics Technology, 2018
[21] Thermoplastic Mixture with Oil Palm Fiber Flow Properties in Rheological Behaviour
Proceedings of Innovative Research and Industrial Dialogue’18, 2018
[22] Journal of the Taiwan Institute of Chemical Engineers
2017
[23] Aplicación de ecuaciones reológicas para el equilibrado de canales en moldes de inyección de plástico
2017
[24] Investigating Pressure Relief on SBC-based Adhesives for Intimate Healthcare Products
2017
[25] Comparative anti-psoriatic efficacy studies of clobetasol loaded chitin nanogel and marketed cream
European Journal of Pharmaceutical Sciences, 2017
[26] Rheological Properties of Nanocomposites Based on Cellulose Nanofibrils and Cellulose Nanocrystals
Handbook of Nanocellulose and Cellulose Nanocomposites, 2017
[27] Rheological, structural and morphological studies of Gum Tragacanth and its inorganic SiO 2 nanocomposite for fracturing fluid application
Journal of the Taiwan Institute of Chemical Engineers, 2017
[28] Tuning of properties of alkyl phenol formaldehyde resins in petroleum demulsifiers. 2. Interfacial dilatational properties
Communications in Soil Science and Plant Analysis, 2017
[29] MATHEMATICAL MODELING OF DYNAMIC VISCOSITY WITH INVERSE ABSOLUTE TEMPERATURE FOR SOLUTIONS CONCENTRATES
2016
[30] Study OF Rheological Properties Of (PEO-PMMA)) Blends.
2016
[31] Rheological properties of PVC stabilized with tannin based epoxy resin as non metallic thermal stabilizer
Polymer Bulletin, 2016
[32] Experimental Approaches to Investigation of the Interaction in Between Anhydride Containing Copolymer and Poly (N-vinyl-Pyrrolidone) Blends
Polymers and Polymer Composites, 2016
[33] Rheology and Processing of Polymer Nanocomposites
2016
[34] Rheological and optical characterization of Polyvinylpyrrolidone (PVP)-Polyethylene glycol (PEG) polymer blends
IOSR Journal of Applied Physics, 2016
[35] Design for Multicomponent Materials
Multicomponent Polymeric Materials, 2016
[36] Rheological behavior of waste polypropylene reinforced with zinc oxide nanoparticles
2016
[37] Unusual Phase Separation in PS Rich Blends with PVME in Presence of MWNTs
Rheology and Processing of Polymer Nanocomposites, 2016
[38] 1 Miscible and Immiscible Polymer Blends
2016
[39] Rheological characteristics of oligomeric semiproducts gained via chemical degradation of polyurethane foam using crude glycerin in the presence of different …
Polymer Engineering & Science, 2016
[40] Efeito do teor do copolímero SEBS no comportamento reológico da blenda PLA/SEBS.
2016
[41] Efeito do teor do copolímero SEBS no comportamento reológico da blenda PLA/SEBS
2016
[42] Synthesis of functional polymers for application towards poly (ethylene) containing barrier materials
2016
[43] BALLISTIC BODY ARMOUR USING SHEAR THICKENING FLUIDS FOR ENHANCING STAB RESISTANCE
Dissertation, 2016
[44] Formulation, optimization and evaluation of microemulsion based transdermal gels of Lornoxicam
2016
[45] Investigation of the Mechanical Behavior of Binary and Ternary Polymer Blends
Iraqi Journal of Applied Physics, 2015
[46] A Comparative Study of the Pure and Nano-Filled Acrylonitrile Butadiene-Styrene Butadiene Rubber Blends'
American Journal of Materials Science and Application, 2015
[47] The Rheological and Morphological Behavior of Virgin and Waste Polypropylene reinforced by Calcium Carbonate Nanoparticles
2015
[48] INFLUENCE OF THE PROCESSING CONDITIONS ON THE ANTIMICROBIAL AND MECHANICAL PROPERTIES
XI Simposio Argentino de Polímeros, 2015
[49] Recycled High Density Polyethylene/Ethylene Vinyl Acetate Blends: The Effect of CaprolactamMaleic Anhydride and Polyethylene-graftedMaleic Anhydride on Tensile Properties and Swelling Behavior
Journal of Advanced Research in Materials Science , 2015
[50] Viscosity and viscoelasticity measurements of low density polyethylene/poly (lactic acid) blends
Polymer Bulletin, 2015
[51] Verification of the Changes in the Structural and Optical Properties of PVA/PEO Embedded by Lithium Chloride
Research Journal of Pharmaceutical, Biological and Chemical Sciences, 2015
[52] Influence of starch addition on properties of methylolated urea/starch copolymer blends for application as a binder in the coating industry
Journal of Toxicology and Environmental Health Sciences, 2015
[53] Effect of nanofillers on incompatible polymer blends
2015
[54] Characterization of Highly Concentrated Elastin-like Polypeptide Solutions: Rheometric Properties and Phase Separation Analysis
2015
[55] Development and evaluation of hybrid joining for metals to polymers using friction stir welding
Thesis, 2015
[56] Understanding the Morphological Changes in the Polypropylene/Polyamide 6 Fifty/Fifty Blends by Interfacial Modifiers Based on Grafted Atactic Polypropylenes: Microscopic, Mechanical, and Thermal Characterization
Journal of Polymers, 2015
[57] CONTROLLING THE MELT RESISTANCE TO FLOW AS POSSIBILITY TO IMPROVE THE MISCIBILITY AND THE TIME BEHAVIOR OF SOME BLENDS BASED ON STARCH
International Journal of Polymer Science, 2015
[58] Bottlebrush Polymers: Synthesis, Rheology, and Self-Assembly
2015
[59] Controlling the Melt Resistance to Flow as a Possibility of Improving the Miscibility and the Time Behavior of Some Blends Based on Starch
International Journal of Polymer Science, 2015
[60] POLY (LACTIC ACID) BASED NANOCOMPOSITES: MECHANICAL, THERMAL AND RHEOLOGICAL PROPERTIES AND MORPHOLOGY
2014
[61] Development of urea formaldehyde and polystyrene waste as copolymer binder for emulsion paint formulation
Journal of Toxicology and Environmental Health Sciences, 2014
[62] Interfacially Synthesized Thin Film Composite Nanofiltration Flat Sheet Membrane by Flowthrough Process
European Journal of Scientific Research, 2014
[63] An unusual demixing behavior in PS–PVME blends in the presence of nanoparticles
Physical Chemistry Chemical Physics, 2014
[64] A mathematical model of rheological behavior of novel bio-based isocyanate-terminated polyurethane prepolymers
Industrial Crops and Products, 2014
[65] Interfacially synthesized thin film composite nanofiltration flat sheet membrane by flow through process
2014
[66] Влияние комплексных наполнителей на свойства политетрафторэтилена
2014
[67] Preparation and characterization of chitosan-eva blend systems
2013
[68] Diseño preliminar de una planta de mezclado de poliolefinas comerciales y recicladas a escala piloto
2013
[69] Study on the Polymer Solution Strength through the Modulus Behaviour
2013
[70] Influence of starch addition on properties of urea formaldehyde/starch copolymer blends for application as a binder in the coating industry
Journal of Environmental Chemistry and Ecotoxicology, 2013
[71] Integral approach for production of thermoplastics microparts by injection moulding
Journal of Materials Science, 2013
[72] Diseño preliminar de una planta de mezclado de poliamidas y poliésteres comerciales y reciclados a escala piloto
2013
[73] Functionalization of polymer electrolytes for electrochromic windows
Thesis, 2013
[74] Injection moulding process optimization for microstructured parts production
2013
[75] Investigation of Some Mechanical Properties of Ternary Polymer Blends Based on Polypropylene
[76] FATORES INTERVENIENTES À VISCOSIDADE DE SOLUÇÕES POLIMÉRICAS COM VISTAS ÀS FORMULAÇÕES DE FLUIDOS DE PERFURAÇÃO E DO …