"Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid"
written by K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy,
published by Engineering, Vol.2 No.10, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Comparison of Various Types of Lubrication During Hard Turning of H13 Tool Steel by Analysing Flank Wear Using ANOVA
2020
[2] Analiza vpliva pulzirajoče visokotlačne asistence hladilno mazalnega sredstva pri struženju titanove zlitine Ti6Al4V
2019
[3] Performances of time-controlled pulse minimum quantity lubrication in machining of hard to cut material: A brief review
2019
[4] Comparison of surface roughness and chip characteristics obtained under different modes of lubrication during hard turning of AISI H13 tool work steel.
IOP Conference Series: Materials Science and Engineering, 2016
[5] OPTIMIZATION OF CUTTING PARAMETERS TO IMPROVE SURFACEROUGHNESS OF AL 1070 IN TURNING OPERATION USING TAGUCHI METHOD
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCHTECHNOLOGY, 2016
[6] APPLICATION OF NUMERICAL SIMULATION AND NEURAL NETWORK MODELS FOR MACHINING PROCESS CONTROL
International Journal of Pharmacy & Technology, 2016
[7] ANFIS based Model for Surface Roughness Prediction for Hard Turning with Minimal Cutting Fluid Application
2016
[8] ОПИСАНИЕ ПРОЦЕССА РЕЗАНИЯ НЕЙРОСЕТЕВЫМИ МОДЕЛЯМИ И УПРАВЛЕНИЕ МЕХАНИЧЕСКОЙ ОБРАБОТКОЙ НА ОСНОВЕ НЕЧЕТКОГО …
2016
[9] Математическое моделирование процессов механической обработки как средство управления технологическими параметрами на основе …
2016
[10] Анализ относительных вынужденных колебаний инструмента и детали при фасонном точении
2016
[11] Estudo da aplicação de mínima quantidade de fluido no fresamento de acabamento da liga Ti-6Al-4V
Repositório Institucional UNESP, 2015
[12] МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ И ОПТИМИЗАЦИЯ ПРОЦЕССОВ МЕХАНИЧЕСКОЙ ОБРАБОТКИ КАК СРЕДСТВО УПРАВЛЕНИЯ …
2015
[13] ESTUDO DA APLICAÇÃO DE MÍNIMA QUANTIDADE DE FLUIDO NO FRESAMENTO DE ACABAMENTO DA LIGA Ti-6Al-4V
Repositório Institucional UNESP, 2015
[14] Engineering Science and Technology, an International Journal
2015
[15] МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ И ОПТИМИЗАЦИЯ ПРОЦЕССОВ МЕХАНИЧЕСКОЙ ОБРАБОТКИ КАК СРЕДСТВО УПРАВЛЕНИЯ …
2015
[16] Study on the influence of fluid application parameters on tool vibration and cutting performance during turning of hardened steel
Engineering Science and Technology, an International Journal, 2015
[17] Ti6al4v Titanium Alloy End Milling with Minimum Quantity of Fluid Technique Use
Materials and Manufacturing Processes, 2015
[18] Evaluation of cutting fluid with nanoinclusions
Journal of Nanotechnology in Engineering and Medicine, 2013
[19] SIMULATION OF SURFACE MILLING OF HARDENED AISI4340 STEEL WITH MINIMAL FLUID APPLICATION USING ARTIFICIAL NEURAL NETWORK.
Advances in Production Engineering & Management, 2012
[20] Simulation of surface milling of hardened AISI4340 steel with minimal fluid application using artificial neural network
Advances in Production Engineering & Management, 2012
[21] ACADAMIC QUALIFICATION:-
2010