International Journal of Nonferrous Metallurgy

International Journal of Nonferrous Metallurgy

ISSN Print: 2168-2054
ISSN Online: 2168-2062
www.scirp.org/journal/ijnm
E-mail: ijnm@scirp.org
"Effect of Stacking Fault Energy on the Mechanism of Texture Formation during Alternating Bending of FCC Metals and Alloys"
written by Natalia Shkatulyak,
published by International Journal of Nonferrous Metallurgy, Vol.2 No.2, 2013
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Hot Deformation Behavior and Dynamic Recrystallization Mechanism Transition of GH4742 Ni-Based Superalloy under Various Deformation Conditions
Journal of Materials …, 2022
[2] Parallel multi-objective calibration of a component-based river temperature model
2019
[3] Novel amorphous SiOC dispersion-strengthened austenitic steels
2019
[4] Corrosion behaviours of low Mo Ni-(Co)-Cr-Mo alloys with various contents of Co in HF acid solution
2019
[5] Вплив деформації на структурні перетворення, механічні властивості та процеси руйнування сплавів заліза та титану
2019
[6] Novel Ni-Based Alloy with Both High Strength and High Corrosion Resistance
2019
[7] Enhanced tensile properties and electrical conductivity of Cu-CNT nanocomposites processed via the combination of flake powder metallurgy and high pressure …
2019
[8] Влияние режимов горячей прокатки алюминиевых сплавов на механические свойства полученного продукта: диссертация на соискание ученой степени …
2018
[9] Effect of ultrasound on silver electrodeposition: Crystalline structure modification
Ultrasonics Sonochemistry, 2017
[10] Anisotropic damage of titanium plates under uniaxial tension after reverse bending
Journal of Materials Research and Technology, 2017
[11] Effets des ultrasons sur l'élaboration de revêtements électrolytiques d'argent et d'argent-étain: nucléation, croissance et structures cristallines
Thèse, 2017
[12] Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718
Materials Science and Engineering: A, 2016
[13] Effect of Alternating Bending and Texture on Anisotropic Damage and Mechanical Properties of Stainless Steel Sheets
Mechanics, Materials Science & Engineering, 2016
[14] Модель описания деформации алюминиевых сплавов при их горячей прокатке с учетом рекристаллизационных процессов
2016
[15] Effects of surface friction treatment on the in vitro release of constituent metals from the biomedical Co–29Cr–6Mo–0.16 N alloy
Materials Science and Engineering: C, 2016
[16] Anisotropic damage of low-alloy steel plates under uniaxial tension after alternating bending
2016
[17] Участь ОІ Георгієвського у реформуванні середніх навчальних закладів Російської імперії
2015
[18] Effect of high-pressure torsion on the microstructure and strengthening mechanisms of hot-consolidated Cu–CNT nanocomposite
Materials Science and Engineering: A, 2015
[19] Effects of cold working on corrosion resistance of Co-modified Ni–16Cr–15Mo alloy in hydrofluoric acid solution
Corrosion Science, Elsevier , 2014
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top