|
[1]
|
Theoretical investigation of the temperature characteristics and output parameters of an industrial crystalline silicon solar cell with a microfluidic cooling system
Materials Research Express,
2023
DOI:10.1088/2053-1591/ace30f
|
|
|
|
|
[2]
|
A novel method for layer separation in waste crystalline silicon PV modules via combined low-temperature and thermal treatment
Waste Management,
2023
DOI:10.1016/j.wasman.2023.10.036
|
|
|
|
|
[3]
|
The influence of thermal parameters on the temperature distribution and output parameters of c-Si solar cell under actual test conditions
AIP Advances,
2022
DOI:10.1063/5.0085215
|
|
|
|
|
[4]
|
The influence of thermal parameters on the temperature distribution and output parameters of c-Si solar cell under actual test conditions
AIP Advances,
2022
DOI:10.1063/5.0085215
|
|
|
|
|
[5]
|
A Review of Models for Photovoltaic Crack and Hotspot Prediction
Energies,
2022
DOI:10.3390/en15124303
|
|
|
|
|
[6]
|
Realization of Micropatterned, Narrow Line-Width Ni–Cu–Sn Front Contact Grid Pattern Using Maskless Direct-Write Lithography for Industrial Silicon Solar Cells
ACS Applied Energy Materials,
2021
DOI:10.1021/acsaem.1c01699
|
|
|
|
|
[7]
|
Realization of Micropatterned, Narrow Line-Width Ni–Cu–Sn Front Contact Grid Pattern Using Maskless Direct-Write Lithography for Industrial Silicon Solar Cells
ACS Applied Energy Materials,
2021
DOI:10.1021/acsaem.1c01699
|
|
|
|
|
[8]
|
Graphene-Decorated Nanocomposites for Printable Electrodes in Thin Wafer Devices
Journal of Electronic Materials,
2017
DOI:10.1007/s11664-017-5734-z
|
|
|
|
|
[9]
|
Characterizing microscale aluminum composite layer properties on silicon solar cells with hybrid 3D scanning force measurements
Scientific Reports,
2016
DOI:10.1038/srep22752
|
|
|
|
|
[10]
|
Characterizing microscale aluminum composite layer properties on silicon solar cells with hybrid 3D scanning force measurements
Scientific Reports,
2016
DOI:10.1038/srep22752
|
|
|
|