Evaluation of Residual Stresses Induced by High Speed Milling Using an Indentation Method

Journals Menu

Follow SCIRP

ISSN Print: 2164-0165
ISSN Online: 2164-0181
www.scirp.org/journal/mme
E-mail: mme@scirp.org

"Evaluation of Residual Stresses Induced by High Speed Milling Using an Indentation Method"
written by Felipe Díaz, Claudio Mammana, Armando Guidobono,
published by Modern Mechanical Engineering, Vol.2 No.4, 2012

has been cited by the following article(s):

[1]	Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes
	Chinese Journal of …, 2022

[2]	Experimental research of the effect of face milling strategy on the flatness deviations
	2020

[3]	Determination and Analysis of Residual Stresses Induced by High Speed Milling Using a Micro-indent Method
	2018

[4]	Mechanical characterization of aluminium hybrid metal matrix composites synthesized by using stir casting process
	2018

[5]	Analysis of residual stresses in high speed milled aluminum alloys
	2017

[6]	Evaluation of Residual Stresses Induced by Face Milling Using a Method of Micro-indents
	2017

[7]	Modeling and Parameter Optimization for Surface Roughness and Residual Stress in Dry Turning Process
	2017

[8]	Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances
	The International Journal of Advanced Manufacturing Technology, 2016

[9]	Surface residual stress measurements by layer removal method
	International Journal of Machining and Machinability of Materials, 2014

[10]	Study of residual stresses from two machining protocols using an indentation method
	FV Díaz, CA Mammana, AP Guidobono - article.sciencepublishinggroup.com, 2013

[1]	Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes Chinese Journal of Aeronautics, 2023 DOI:10.1016/j.cja.2022.07.020

[2]	Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes Chinese Journal of Aeronautics, 2022 DOI:10.1016/j.cja.2022.07.020

[3]	Experimental research of the effect of face milling strategy on the flatness deviations Materials and Manufacturing Processes, 2020 DOI:10.1080/10426914.2020.1819548

[4]	Mechanical characterization of aluminium hybrid metal matrix composites synthesized by using stir casting process Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.10.058

[5]	Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances The International Journal of Advanced Manufacturing Technology, 2017 DOI:10.1007/s00170-016-9066-6

[6]	Modeling and Parameter Optimization for Surface Roughness and Residual Stress in Dry Turning Process Engineering, Technology & Applied Science Research, 2017 DOI:10.48084/etasr.1560

Follow SCIRP