Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Analysis of Density of Sintered Iron Powder Component Using the Response Surface Method"
written by Prasanta Kumar Bardhan, Suprs Patra, Goutam Sutradhar,
published by Materials Sciences and Applications, Vol.1 No.3, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Effect of sintering parameters on the microstructure and micromechanical properties of in-situ synthesized boride phases (Fe2B-FeB) in iron matrix composites …
Materials Characterization, 2022
[2] Ferrous Metal Matrix Composites Status Scope and Challenges
arXiv preprint arXiv:2204.09999, 2022
[3] Low-Voltage Capacitor Electrical Discharge Consolidation of Iron Powder. Metals 2022, 12, 1461
2022
[4] Comparison of theoretical and experimental physio-mechanical properties of coal-fly ash (CFA) reinforced iron matrix composites
International Journal on …, 2022
[5] Low-Voltage Capacitor Electrical Discharge Consolidation of Iron Powder
2022
[6] Strengthening Behaviour and Microstructural Properties during the Compaction of Reduced Blast Furnace Flue Dust—Fly Ash—Iron Metal Matrix Composite Fines …
Transactions of the Indian Institute of …, 2022
[7] A review on the influence of process parameters on powder metallurgy parts
Engineering and Applied …, 2022
[8] Fabricación de núcleos magnéticos amorfos mediante consolidación eléctrica
2022
[9] Effect of Sintering Temperature and Aluminum Concentration on the Hardness, Microstructure and Density of Copper-Aluminum Alloys
2021
[10] Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
2021
[11] Sinterability Studies of High Carbon Steel Powders Containing Nickel, Molybdenum, Cobalt and Manganese
2020
[12] Medium-frequency Electrical Resistance Sintering of Oxidized cp Iron Powder
2018
[13] Study on Induction Hardening of Sintered Low Carbon Alloy Steel
2018
[14] Investigation of Mechanical Properties of Fe-Based Metal Matrix Composites by Warm Compaction for Gear Production
2017
[15] Design, fabrication, and characterization of porous titanium for biological applications
ProQuest Dissertations Publishing, 2016
[16] On the Densification and Elastic Modulus of Sintered Cr-Mo Steels
Metallurgical and Materials Transactions B, 2015
[17] Modeling the response of physical and mechanical properties of Cr–Mo prealloyed sintered steels to key manufacturing parameters
Materials & Design, 2014
[18] Densification and volumetric change during supersolidus liquid phase sintering of prealloyed brass Cu28Zn powder: Modeling and optimization
Science of Sintering, 2014
[19] Framework for Induction Hardening Parameters Optimization of Sintered Iron Alloy by using Intelligent Techniques
2013
[20] بررسی چگالش و تغییرات ابعادی در تفجوشی فاز مایع سوپرسالیدوس آلیاژ برنجی Cu-28Zn‎
2013
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top