Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"The Effect of Ageing Time on Some Mechanical Properties of Aluminum/0.5% Glass Reinforced Particulate Composite"
written by Aondona .P. Ihom, Nyior .G. Bem, Emmanuel E. Anbua, Joy N. Ogbodo,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.9, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Studies on mechanical property of squeeze cast and heat treated AA6061-ZrO2 composite
2020
[2] Hardness improvement of aluminum alloy 2024 t3 after artificial aging treatment
2019
[3] Wear Behavior of LM6–Borosilicate Glass Reinforced Metal Matrix Composite
International Journal of Research in Engineering, Science and Management, 2018
[4] Investigations on LM6 Metal Matrix Composite with borosilicate Glass Reinforcement for Aerospace applications
IOP Conference Series: Materials Science and Engineering, 2017
[5] Experimental studies of the Mechanical and Microstructure Properties of LM6 Metal Matrix Composite with borosilicate Glass Reinforcement
International Journal of Applied Engineering Research, 2015
[6] Development of 93.95 Al-5Zn-1.05 Sn Ternary Alloy and Its Response to Ageing
2015
[7] Production of 93.95 Al-5Zn-1.05 Sn/Al2O3. SiO2 Particulate Composites and the Establishment of Relationship between Independent Variables and Hardness of the Composites Using MATLAB
2014
[8] Production of 75Pb-15Sb-10Sn/10% v/v SiO2 Particulate Composite and Ageing Characteristics
International Journal of Engineering and Technology, 2014
[9] Fabrication and Mechanical Properties of Economic Composite Materials Using Alumimium Scrap and Wasted Glass
JHG Al-Imari - psrcentre.org, 2014
[10] Microstructure and Interface Analysis of Glass Particulate Reinforced Aluminum Matrix Composite
Advanced Materials Research, 2013
[11] Morphology and Hardness Improvement of Lead Bearing Alloy through Composite Production: 75Pb-15Sb-10Sn/15% V/V SiO2 Particulate Composite
Leonardo Electronic Journal of Practices and Technologies, 2013
[12] Hardness improvement of Pb75%-Sb15%-Sn10% bearing alloy through reinforcement with 5% v/v SiO2 particulates
Usak University Journal of Material Sciences, 2012
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top