"Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels"
written by Subramanian Gopalakannan, Thiagarajan Senthilvelan,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Reviewing Sustainability Interpretation of Electrical Discharge Machining Process using Triple Bottom Line Approach
2019
[2] A review on optimization of machining performances and recent developments in electro discharge machining
2019
[3] Surface evaluation of ED machined 316L stainless steel in TiO2 nano-powder mixed dielectric medium
2019
[4] A Review on Process Parameter Optimization in EDM
2019
[5] Machining performance and influence of process parameters on stainless steel 316L using die-sinker EDM with Cu tool
2019
[6] A Review on Copper and its alloys used as electrode in EDM
IOP Conference Series: Materials Science and Engineering, 2018
[7] Mould Insert Surface Roughness Optimization by Orthogonal Array Methodology in Electrical Discharge Machining
SAST JOURNAL OF SCIENCE AND TECHNOLOGY, 2018
[8] Effects of Process Parameters on Material Removal Rate and Surface Roughness in Wedm of H-13 Die Tool Steel
Advanced Engineering Forum, 2018
[9] EFFECT OF CURRENT AND ELECTRODE MATERIAL ON MATERIAL REMOVAL RATE (MRR) AND SURFACE ROUGHNESS (RA) IN EDM PROCESS
AL-TAQANI, 2017
[10] The Effect of Process Parameters on the Performance Characteristics of Wire Electrical Discharge Machining of AISI D3 Tool Steel
IUP Journal of Mechanical Engineering, 2017
[11] Effects of EDM Process parameters on Material Removal Rate, Electrode Wear Rate and Surface Roughness in Incoloy-800
2017
[12] A Review on Influence of Process Parameters and Electrodes Materials in EDM Process
IJIRST–International Journal for Innovative Research in Science & Technology, 2017
[13] Surface characteristics of Ti-5Al-2.5 Sn in electrical discharge machining using negative polarity of electrode
The International Journal of Advanced Manufacturing Technology, 2017
[14] ELID grinding and EDM for finish machining
2017
[15] Experimental Study of MRR, TWR, SR on SS 316 and AISI D2 steel using Aluminium Electrode on EDM
2016
[16] Effect of Pulse on Time and Pulse off Time on Material Removal Rate and Electrode Wear Ratio of Stainless Steel AISI 316L in EDM
2016
[17] Investigating Feasibility of Waste Vegetable Oil for Sustainable EDM
2016
[18] Analysis the Effect of Process Parameter on EDM of η-WC-10% Co by Taguchi Method
International Journal of Engineering Technology, Management and Applied Sciences, 2016
[19] Employing severe plastic deformation to the processing of electrical discharge machining electrodes
Precision Engineering, 2016
[20] Experimental Analysis of Machining Parameters for EDM of AISI 4340 Steel using Copper-Tungsten Electrode
Journal of Thermal Energy Systems, 2016
[21] A Review–Comparative Study & Optimization of Different Tool Material on AISI 2136 (Plastic Mould Steel) in EDM
2016
[22] Optimization of tool wear rate during electrical discharge machining of advanced materials using Taguchi analysis
2016
[23] 1.13 ELID Grinding and EDM for Finish Machining
2016
[24] Parametric Study For Overcut Using EDM With Tool of Graphite, Copper & Silver
2015
[25] INFLUENCE OF ELECTRODE MATERIAL ON QUALITY OF BLIND HOLES MACHINED VIA ELECTRIC DISCHARGE MACHINE (DIE SINKER)
2015
[26] Assessment of operational feasibility of waste vegetable oil based bio-dielectric fluid for sustainable electric discharge machining (EDM)
The International Journal of Advanced Manufacturing Technology, 2015
[27] EXPERIMENTAL STUDY OF ELECTRICAL DISCHARGE MACHINING ON STAINLESS STEEL WORKPIECE USING ONE PARAMETER AT A TIME APPROACH
ELK Asia Pacific Journals – Special Issue, 2015
[28] An Experimental Investigation of Electrode Wear Rate (EWR) on EDM of SS-202 using Different Electrodes
International Journal of Engineering Research and Technology, 2015
[29] Experimental Study of Electrical Discharge Machine (die sinking) on Stainless Steel 316L Using Design of Experiment
Procedia Manufacturing, 2015
[30] Experimental Investigation of Electrode Wear in Die-Sinking EDM on Different Pulse-on &off Time (µs) in Cylindrical Copper Electrode
International Journal of Modern Engineering Research (IJMER), 2015
[31] Experimental Investigation of Electrode Wear in Die-Sinking EDM on Different Pulse-on &off Time (μs) in Cylindrical Copper Electrode
International Journal of Modern Engineering Research, 2015
[32] Effect of current and deep cryogenic treated EDM electrodes on surface roughness of AISI D3 steel
Applied Mechanics and Materials, 2015
[33] Investigations on the electric discharge machining of aluminium metal matrix composites MMCS and Aluminium Metal Matrix Nano Composites Mmncs
2014
[34] Performance Evaluation of Electrical Discharge Machining Die Sinking on Stainless Steel 316L Using Copper Impregnated Graphite
Applied Mechanics and Materials, 2014
[35] Comparative Studies On Electrical Discharge Machining Parameterspowder Metallurgical Electrode With Conventional Electrode
2014
[36] Comparative studies on electrical discharge machining parameters powder metallurgical electrode with conventional electrode
2014
[37] A Review–An Experimental Effect of Electrode Material on Overcut, MRR, TWR and Surface Roughness of AISI 304 Stainless Steel in EDM
[38] Experimental Investigation and Optimization of RaValue, EWR, and MRRinElectric DischargeMachining
[39] OPTIMIZATION OF CUTTING SPEED PARAMETER FOR ROUNDNESS STUDY IN WIRE EDM FOR DIFFERENT MATERIALS BY TAGUCHI METHOD
[40] Research Article An Experimental Investigation on AISI 316 Stainless Steel for Tool Profile Change in Die Sinking EDM Using DOE