"Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al2O3)"
written by T. Sasimurugan, K. Palanikumar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.13, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Experimental Investigation on Microstructural and Wear Behaviour of Dual Reinforced Particles (DRP) Aluminium Alloy Composites
2020
[2] 3D Visualization and Topographical Analysis in Turning of Hybrid MMC By CNC Lathe SPRINT 16TC Made of BATLIBOI
2020
[3] Automotive industry application of aluminium-based hybrid metal matrix composite
2020
[4] Investigation of cutting tool wear behaviors in machining of silicon carbide and magnesium oxide reinforced aluminum 2024 matrix composites
2019
[5] EVALUATION OF MACHINING PARAMETERS & SURFACE ROUGHNESS OF AL4600/SIC METAL MATRIX COMPOSITE BY TAGUCHI EXPERIMENTAL …
2019
[6] Parametric Optimization of Rice Husk Ash, Copper, Magnesium reinforced Aluminium Matrix hybrid Composite processed by EDM
2019
[7] Study of Peripheral Milling of Magnesium Matrix Composite
2019
[8] Study on Microstructure and EDAX Analysis of Al/SiC/Gr Hybrid Metal Matrix Composites
2019
[9] Influence of rice husk ash, Cu, Mg on the mechanical behaviour of Aluminium Matrix hybrid composites
2019
[10] Parametric Study During Abrasive Water Jet Turning of Hybrid Metal Matrix Composite
Advances in Manufacturing Engineering and Materials, 2019
[11] Optimization of Process Parameters of 16-TC Botliboi CNC During Machining of Hybrid Metal Matrix Composites
2018
[12] Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties–A Review
2018
[13] Surface Integrity analysis of Wire-EDM on in-situ hybrid composite A359/Al2O3/B4C
2018
[14] Aluminium metal matrix composites: A retrospective investigation
2018
[15] A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018
[16] Optimization of Machining Parameters for CNC Turning of Al/Al2O3 MMC Using RSM Approach
Materials Today: Proceedings, 2018
[17] A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
2018
[18] An Investigation into Orthogonal and Oblique Cutting Processes
2018
[19] A COMPARATIVE STUDY ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY AND THE MMC
International Journal of Research Sciences and Advanced Engineering [IJRSAE], 2017
[20] Optimization of Machining Parameters in CNC Turning of Hybrid Metal Matrix Composites Using Different Techniques: A Review
2017
[21] Machining Investigation on Hybrid Metal Matrix Composites-A Review
Materials Today: Proceedings, 2017
[22] Experimental Investigation of Peripheral Milling of Functionally Gradient Al-SiC Metal Matrix Composite
2017
[23] Performance investigation of aluminum 6061 metal matrix composite
2017
[24] Experimental Studies on Influence of Redmud on Thrust force and Surface Roughness of Novel Al6061 Hybrid Composites
2017
[25] Sustainable End Milling of Difficult-Materials
2017
[26] COMPARISONS OF PARAMETERS IN ELE MACHINING OF ALU HYBRID NANO METAL M
International Journal of Mechanical Engineering and Technology, 2017
[27] Manufacturing of aluminium nano hybrid composites: a state of review
IOP Conference Series: Materials Science and Engineering, 2016
[28] Effect of HSS and Tungsten Carbide Tools on Surface Roughness of Aluminium Alloy during Turning Operation
2016
[29] FABRICATION OF HYBRID MMCS AND THEIR FUTURE SCOPE–A REVIEW
International Research Journal of Engineering and Technology, 2016
[30] Experimental Investigation and Optimization of Machining Parameters using Grey-Relational Analysis Approach and Fuzzy Based Taguchi Loss Function Method
2016
[31] A review on the intensification of metal matrix composites and its nonconventional machining
Science and Engineering of Composite Materials, 2016
[32] ALUMINIUM MATRIX HYBRID COMPOSITES: A REVIEW OF DIFFERENT REINFORCEMENTS ON MECHANICAL AND TRIBOLOGICAL CHARACTERISTICS
International Journal of Exploring Emerging Trends in Engineering, 2016
[33] Contributions to understanding the high speed machining effects on aeronautic part surface integrity
2015
[34] Tool Wear Analysis of Al 6061 Reinforced with 10 wt% Al2O3 Using High Hardened Inserts
Applied Mechanics and Materials, 2015
[35] Studies on machining parameters while milling particle reinforced hybrid (Al6061/Al2O3/Gr) MMC
Journal of Environmental Science and Health, Part A: Toxic/Hazardous Substances and Environmental Engineering, 2015
[36] Aluminium Metal Matrix composite–an insight into solid state and liquid state processes
2015
[37] Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651
Materials, 2014
[38] Hybrid aluminium metal matrix composite reinforced with SiC and TiB2
2014
[39] Fabrication of Aluminium Composite Using Stir Casting Process and Optimization of Machining Parameters
Asian Review of Mechanical Engineering, 2014
[40] Machining of Sic—metal matrix composite (MMC) by polycrystalline diamond (PCD) tools and effect on quality of surface by changing machining parameters
2014
[41] Electro Discharge Machining Of Hybrid Aluminum Metal Matrix Composite By Using Taguchi Method
2014
[42] Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology
Procedia Engineering, 2014
[43] Analysis of Looped Water Distribution Network with Different Head Loss Formula
2014
[44] Effects of in-Situ TiC Reinforcements on the Machining Process Characteristics of Al+ 12Si Matrix
2014
[45] Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr Hybrid MMC
2013
[46] Optimization of Tool Shape and Size in EDM of Al Alloy Metal Matrix Composites.
International Journal of Applied Engineering Research, 2013
[47] Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr Hybrid MMC.
2013
[48] ANN Based Surface Roughness Prediction In Turning Of AA 6351
KM Naidu, SR Rao - Citeseer, 2013
[49] Optimization of Surface Roughness and Vibration in Turning of Aluminum Alloy AA2024 Using Taguchi Technique
International Journal of Mechanical, Industrial Science and Engineering, 2013
[50] A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites
Procedia Engineering, 2012
[51] ВЛИЯНИЕ РЕЖИМОВ АЛМАЗНОГО ТОЧЕНИЯ И СОСТАВА МЕТАЛЛОМАТРИЧНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ НА КАЧЕСТВЕННЫЕ …
2012
[52] Characteristics of Aluminum Hybrid Composites
International Journal of Materials and Metallurgical Engineering, 2012
[53] Assessment of Surface Roughness in EDM of RHA, Cu and Mg Reinforced Hybrid MMC using L27 Taguchi's Orthogonal Array
[54] Improvement the Bar Bow of Al2O3-TiC Thinner Bar in High Precision of Grinding and Cutting Processes
[55] Investigation of the Effect on Copper and Silicon Additives on Machinability in Turning of Al-25Zn Alloy with CVD-Al2O3 Coated Tools
[56] Bakır ve Silisyum İlavelerinin Al-25Zn Alaşımının CVD Al2O3 Kaplamalı Takımlarla Tornalanmasında İşlenebilirliğe Etkisinin İncelenmesi