Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites"
written by Rabindra Behera, S. Das, D. Chatterjee, G. Sutradhar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.10, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Surface Roughness Analysis in Machining of TiC Reinforced Aluminum LM6


[2]	MECHANICAL PROPERTIES OF MARBLE DUST REINFORCED ALUMINUM MATRIX STRUCTURAL COMPOSITES FABRICATED BY STIR CASTING PROCESS
	MATERIALS PHYSICS AND …, 2022

[3]	Influence of Melt Quality on Machinability of HPDC Al9Si3Cu
	JOM, 2022

[4]	Machinability study on Al7075/Al2O3-SiC hybrid composites
	Metallurgical and …, 2022

[5]	Fabrication, Characterization and Machining of Al6061 Reinforced with Red Mud Composite
	Journal of Minerals and …, 2021

[6]	Metal matrix composites fabricated by stir casting process–a review
	2021

[7]	Investigation of the Effect of Wire Electrical Discharge Machining on the Fracture Toughness of Aluminum-Boron Carbide Composite
	2021

[8]	Multi-objective Optimization of Turning Parameters for SiC-or Al 2 O 3-Reinforced Aluminum Matrix Composites
	2021

[9]	Process optimization using grey relational analysis in dry sliding wear behavior on SiC/B4C/Talc reinforced Al 6061 hybrid metal matrix composite
	Metallurgical …, 2021

[10]	Study the effect of Bauxite ceramic powder on the fracture mechanics of aluminum alloy using digital image correlation
	2020

[11]	Analysis of anisotropy in the upsetting process of AA2014 cast alloy embedded with fly ash
	2020

[12]	Investigations on the Machinability of Al/SiC/RHA Hybrid Metal Matrix Composites
	2019

[13]	Mechanical characteristics of Al-Al2O3-SiC metal matrix composites made by stir casting technique
	2019

[14]	Fabrication and Properties of Aluminium Matrix Hybrid Nanocomposites By Stir Casting
	International Journal of Recent Technology and Engineering, 2019

[15]	Preparation and Characterization of Aluminium Metal Matrix Composites
	Advanced Science, Engineering and Medicine, 2018

[16]	FABRICATION AND TESTING OF ALUMINIUM METAL MATRIX COMPOSITES THROUGH STIR CASTING TECHNIQUE
	International Research Journal of Engineering and Technology, 2018

[17]	A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
	"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018

[18]	Effect of forging on mechanical properties of rice husk ash-silicon carbide reinforced Al1100 hybrid composites
	AIP Conference Proceedings, 2018

[19]	PREPARATION AND CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITE BY USING STIR CASTING TECHNIQUE
	2018

[20]	A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
	2018

[21]	FABRICATION AND TESTING OF ALUMINIUM METAL MATRIX COMPOSITES THROUGH STIR CASTING
	2018

[22]	Fabrication and characterisation of hybrid aluminium metal matrix composite with welding slag and flux by using stir casting technique
	2018

[23]	INFLUENCE OF ACTIVATED CARBON PARTICLES ON MICROSTRUCTURE AND THERMAL ANALYSIS OF AA7075 METAL MATRIX COMPOSITES
	2017

[24]	INFLUENCE OF BORON CARBIDE REINFORCEMENT ON MECHANICAL PROPERTIES OF ALUMINUM BASE COMPOSITE PREPARED BY STIR AND SQUEEZE CASTING
	2017

[25]	Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
	2017

[26]	Mechanical properties and morphology of aluminium metal matrix nanocomposites-stir cast products
	Analytical Letters, 2017

[27]	Mechanical behavior of A356 matrix nanocomposites fabricated using two step mixing via stir casting technique
	2017

[28]	Machinability and Tribological Properties of Stir Cast LM6/SiC/GR Hybrid Metal Matrix Composite
	2016 International Conference on Measurement Instrumentation and Electronics (ICMIE 2016), 2016

[29]	A GENERAL REPORT ON PREVIOUS EXPERIMENTS PERFORMED ON THE ALUMINUM-SILICON CARBIDE METAL MATRIX COMPOSITES
	INT. J. NEW. INN., 2016

[30]	Effect of high speed turning operation on surface roughness of hybrid metal matrix (Al-SiCp-fly ash) composite
	Journal of Mechanical Science and Technology, 2016

[31]	Investigation of micro-structural and mechanical properties of metal matrix composite A359/B 4 C through electromagnetic stir casting
	2016

[32]	A Study on Effect of Graphite Particles on Tensile, Hardness and Machinability of Aluminium 8011 Matrix Material
	IOP Conference Series: Materials Science and Engineering, 2016

[33]	Investigation of micro-structural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting
	2016 - NISCAIR-CSIR, 2016

[34]	Aluminium composites materials using stir casting process: challenges and opportunities
	2015

[35]	Optimization of process parameters during machining of thixoformed A356-5TiB 2 in-situ composite using Design of Experiments
	2015

[36]	Experimental Evaluation in the Properties of Various Tin Bronzes
	International Journal of Latest Technology in Engineering, Management & Applied Science, 2015

[37]	Prediction of Material Removal Rate using Artificial Neural Network in CNC Turning Process on Aluminum
	2015

[38]	STRENGTH AND DUCTILITY OF FORGED 1200 ALUMINUM ALLOY REINFORCED WITH STEEL PARTICLES
	Nigerian Journal of Technology, 2015

[39]	THERMAL IMAGING-ASSIST HAND
	2015

[40]	Effects of in-Situ TiC Reinforcements on the Machining Process Characteristics of Al+ 12Si Matrix
	2014

[41]	Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite
	Materials Science Forum, 2014

[42]	Development and testing of Al5083 alloy reinforced by SiC particles
	AH Idrisi, VD Singh, V Saxena - ijsret.org, 2014

[43]	Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite
	Materials Science Forum, 2014

[44]	Analysis of Material Characteristics and Forging Parameters for Flashless Forged Aluminum-Matrix Composites
	Materials and Manufacturing Processes, 2014

[45]	Experimental Investigation of Turning of LM13/SiC Composite Using Carbide Inserts
	S Singh, RK Bhushan, 2014

[46]	Analysis of Tribological Behavior of Aluminium/B< sub> 4 C Composite Under Dry Sliding Motion
	Procedia Engineering, 2014

[47]	Study and Development of Novel Composite Materials for the Application of Car Brake Rotor
	2014

[48]	Microstructure and Mechanical Properties of Al7075-TiB2 in-situ composite
	Research Journal of Material Sciences, 2013

[49]	Experimental optimization in turning of in-situ AlB2 reinforced AlMg3 matrix composites produced by centrifugal casting method
	Journal of Composite Materials, 2013

[50]	A Review on Manufacturing of Composite Materials by Electromagnetic Stir Casting Method
	2013

[51]	Machinability of aluminum metal matrix composite reinforced with in-situ ceramic composite developed from mines waste colliery shale
	Materials and Manufacturing Processes, 2013

[52]	CUTTING PARAMETER OPTIMISATION FOR ALUMINIUM LM6 COMPOSITE USING EXPERIMENTAL DESIGN
	2013

[53]	Machining Response in Turning Aluminium Composite LM13 With 15% SiC
	NULL 2012

[1]	An experimental investigation on mechanical properties of aluminium-7075 based graphite and bagasse ash particles reinforced metal matrix composite THE 8TH ANNUAL INTERNATIONAL SEMINAR ON TRENDS IN SCIENCE AND SCIENCE EDUCATION (AISTSSE) 2021, 2022 DOI:10.1063/5.0108849

[2]	Effect of Silicon Carbide Boron Carbide and Fly-Ash Particles on Aluminium Metal Matrix Composite Advances in Material Science and Mechanical Engineering, 2021 DOI:10.4028/www.scientific.net/AST.106.26

[3]	Investigation of the Effect of Wire Electrical Discharge Machining on the Fracture Toughness of Aluminum-Boron Carbide Composite IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1094/1/012162

[4]	Effect of different parameters and aging time on wear resistance and hardness of SiC-B4C reinforced AA6061 alloy Journal of Mechanical Science and Technology, 2020 DOI:10.1007/s12206-020-0424-9

[5]	Mechanical characteristics of Al-Al2O3-SiC metal matrix composites made by stir casting technique IOP Conference Series: Materials Science and Engineering, 2019 DOI:10.1088/1757-899X/653/1/012005

[6]	Effect of forging on mechanical properties of rice husk ash-silicon carbide reinforced Al1100 hybrid composites 2018 DOI:10.1063/1.5029626

[7]	Machinability and Tribological Properties of Stir Cast LM6/SiC/GR Hybrid Metal Matrix Composite MATEC Web of Conferences, 2016 DOI:10.1051/matecconf/20167502001

[8]	Effect of high speed turning operation on surface roughness of hybrid metal matrix (Al-SiCp-fly ash) composite Journal of Mechanical Science and Technology, 2016 DOI:10.1007/s12206-015-1210-y

[9]	A Study on Effect of Graphite Particles on Tensile, Hardness and Machinability of Aluminium 8011 Matrix Material IOP Conference Series: Materials Science and Engineering, 2016 DOI:10.1088/1757-899X/149/1/012060

[10]	Optimization of process parameters during machining of thixoformed A356-5TiB2 in-situ composite using Design of Experiments 2015 International Conference on Robotics, Automation, Control and Embedded Systems (RACE), 2015 DOI:10.1109/RACE.2015.7097253

[11]	Analysis of Material Characteristics and Forging Parameters for Flashless Forged Aluminum-Matrix Composites Materials and Manufacturing Processes, 2014 DOI:10.1080/10426914.2013.822986

[12]	Machinability of Aluminum Metal Matrix Composite Reinforced with In-Situ Ceramic Composite Developed from Mines Waste Colliery Shale Materials and Manufacturing Processes, 2013 DOI:10.1080/10426914.2013.811734

[13]	Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite Materials Science Forum, 2013 DOI:10.4028/www.scientific.net/MSF.773-774.339

[14]	Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite Materials Science Forum, 2013 DOI:10.4028/www.scientific.net/MSF.773-774.894

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies