"Microstructure and Mechanical Properties of Ceramic Composites"
written by V.S. Aigbodion, J. O. Agunsoye, V. Kalu, F. Asuke, S. Ola,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.6, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A Special Issue on Advanced Functional Materials
2019
[2] Methodology for Preparation Samples from Waste and Techniques for Characterization
2019
[3] Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites
2019
[4] COMPOSITE MATERIALS WITH CERAMIC AND METALLIC PARTICLES REINFORCED CLAY MATRIX
2019
[5] Composites with clay and bentonite matrix: a study of the certain materials behavior for ceramic composites
2019
[6] MICROSTRUCTURAL, PHYSICAL AND MECHANICAL ANALYSIS OF RHA PORE MODIFIED POROUS ALUMINA WITH ALUMINUM AS REINFORCEMENT
2019
[7] Preparation and properties of porous clay/CuZn composite produced by extrusion process
AIP Conference Proceedings, 2018
[8] Effect of heat treatment on dry sand abrasive wear behavior of Al7075-Albite particulate composites
Materials Today: Proceedings, 2018
[9] Synthesis and characterisation of iron millscale particles reinforced ceramic matrix composite
Journal of King Saud University - Engineering Sciences, 2017
[10] Microstructure and Dry Sliding Wear Behaviour of Al2219-TiC Composites
Materials Today: Proceedings, 2017
[11] The effect of CHA-doped Sr addition to the mechanical strength of metakaolin dental implant geopolymer composite
AIP Conference Proceedings, 2017
[12] Linear Shrinkage of the ZTA Ceramic Cutting Inserts
Procedia Chemistry, 2016
[13] Development and characterisation of iron millscale particle reinforced ceramic matrix composite
Journal of Taibah University for Science, 2016
[14] Structural and optical properties of erbium-doped willemite-based glass-ceramics
Applied Optics, 2015
[15] Porous material produced by ceramic injection molding
2015
[16] Characterization of IT-SOFC non-symmetrical anode sintered through conventional furnace and microwave
Ceramics International, 2015
[17] Mechanical Testing of Ceramics
Mechanical Properties of Ceramics, 2014
[18] Production of Alumino-Silicate Clay-Bonded Bagasse Ash Composite Crucible by Slip Casting
2014
[19] Development and Characterisation of iron millscale
2014
[20] Production of aluminosilicacateclay-bonded bagasse ash composite crucible by slip casting
2014
[21] AbrAsive WeAr behAvior of Al6061-frit pArticulAte composites
Journal of Mechanical Engineering and Technology (JMET), 2011