"Mineralogy and Geochemistry of A Low Grade Iron Ore Sample from Bellary-Hospet Sector, India and Their Implications on Beneficiation"
written by D. S. Rao, T. V. Vijaya Kumar, S. Subba Rao, S. Prabhakar, G. Bhaskar Raju,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.8 No.2, 2009
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Geochemistry and Petrographical Study of Langrial Iron Ore from Tethyan Hazara Area Pakistan, with Emphasis on its Economic Characterization and Depositional …
2019
[2] Characterization and Comminution Studies of Low-Grade Indian Iron Ores
2019
[3] Physical, Chemical and Mineralogical Characterization of Fluorspar Flotation Tailings
Materials Today: Proceedings, 2018
[4] Mineralogy and geochemistry of Sub-grade iron ore sample from deposit no. 5 of bacheli complex, bailadila, Chhattisgarh, India, and their implications on beneficiation
Journal of Applied Geochemistry, 2018
[5] A Beneficiation Study on a Low Grade Iron Ore by Gravity and Magnetic Separation
Russian Journal of Non-Ferrous Metals, 2018
[6] Process Mineralogy of Iranian High Sulfur Iron Ore
2018
[7] Geochemistry and Petrographical Study of Langrial Iron Ore from Tethyan Hazara Area Pakistan, with Emphasis on its Economic Characterization and …
2018
[8] Evaluation of Mesh of Liberation of Zard Koh and Kulli Koh Iron Ores of Pakistan
2018
[9] Studies on Characterization and Beneficiation of Typical Low-Grade Goethitic Iron Ore Jharkhand, India
Transactions of the Indian Institute of Metals, 2018
[10] Genesis of langrial iron ore of hazara area, khyber pakhtunkhaw, parkistan
2018
[11] Chemical, physical, thermal, textural and mineralogical studies of natural iron ores from Odisha and Chhattisgarh regions, India
2018
[12] Recovery of hematite from fluorspar tailings using reverse cationic flotation
Thesis, 2017
[13] Mineralogical Study of Zard Koh and Kulli Koh Iron Ore Deposits of Pakistan
2017
[14] Physical, mechanical and metallurgical characteristics of banded hematite jasper of Ghatkuri (Gua), Jharkhand
Journal of the Geological Society of India, 2017
[15] Optimization of Reverse Cationic Flotation of Low-Grade Iron Oxide from Fluorspar Tails Using Taguchi Method
Arabian Journal for Science and Engineering, 2017
[16] Non-isothermal reduction characteristics of roasted high alumina iron ore pellets
Research in Post-Compulsory Education, 2017
[17] Geochemistry and Economic Potential of Jaruwa Iron Ores, NW-Nigeria.
2017
[18] Quality of Iron ores in Kenya; TharakaNithi and Samia
2016
[19] Hematite and Goethite inclusions in low-grade dolomitic banded iron formations: physical parameter evaluation to optimize ore beneficiation
XXVIII International Mineral Processing Congress Proceedings , Canadian Institute of Mining, Metallurgy and Petroleum, 2016
[20] Quantitative Estimation of Mineral Phases from Chemical Assays and Powder X-Ray Diffraction Rietveld Analysis: A Case Study on Selective Flocculation of Iron Ore Slimes
Transactions of the Indian Institute of Metals, 2016
[21] X-ray computed tomography–determination of rapid scanning parameters for geometallurgical analysis of iron ore
2016
[22] Quantitative analysis of iron ore using SEM-based technologies
Iron Ore: Mineralogy, Processing and Environmental Sustainability, 2015
[23] QUALITATIVE AND MINERALOGICAL CHARACTERIZATION OF LEAD DEPOSIT IN ISHIAGU, EBONYISTATE NIGERIA
Characterization of Minerals, Metals, and Materials 2015, 2015
[24] CHARACTERISATION DRIVEN PROCESSING OF INDIAN SUB-MARGINAL GRADE OF IRON ORE FOR VALUE ADDITION
Thesis, 2015
[25] Qualitative and Mineralogical Characterization of Lead Deposit in Ishiagu, Ebonyi State Nigeria
Characterization of Minerals, Metals, and Materials 2015, 2015
[26] Geometallurgical Evaluation of the Nkout (Cameroon) and Putu (Liberia) Iron Ore Deposits
2014
[27] Reduction of low grade iron ore pellet using palm kernel shell
Renewable Energy, 2014
[28] Artificial neural network approach to assess selective flocculation on hematite and kaolinite
International Journal of Minerals, Metallurgy, and Materials, 2014
[29] Infrared thermography: An approach for iron ore gradation
Minerals Engineering, 2014
[30] Differential Characterization of Ikperejere Iron Shale and Iron Sandstone
Characterization of Minerals, Metals, and Materials 2014, 2014
[31] Influence of sinter basicity (CaO/SiO2) on low and high alumina iron ore sinter quality
Mineral Processing and Extractive Metallurgy (Trans. Inst. Min Metall. C), 2014
[32] A non-invasive technique for sorting of alumina-rich iron ores
Minerals Engineering, 2013
[33] Performance evaluation for selectivity of the flocculant on hematite in selective flocculation
International Journal of Minerals, Metallurgy, and Materials, 2013
[34] Selection of Cationic Collector for Reduction of Alumina and Silica in Iron Ore Slimes of an Operating Plant by Flotation
TVV Kumar, SJ Gopalkrishna - ijesrt.com, 2013
[35] Recovery of values from tailing ponds of iron ore washing plants
2012
[36] Characterization of Concentrate, Pellet and DRI Samples for Trace Elements
Characterization of Minerals, Metals, and Materials, 2012
[37] Characterization of Mexico Magnetic Concentrate Samples for Trace Elements Ni, Cu, Zn, S and P
T.T. Chen Honorary Symposium on Hydrometallurgy, Electrometallurgy and Materials Characterization, 2012
[38] Reactive Adsorption of NO2 at Ambient Conditions on Iron‐Containing Polymer‐Based Porous Carbons
ChemSusChem, 2011