"Carbon Nanotube Based Composites- A Review"
written by Rupesh Khare, Suryasarathi Bose,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.4 No.1, 2005
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Contamination in Manufacturing of Carbon Nanostructures
[2] Recent progress of carbon dots and carbon nanotubes applied in oxygen reduction reaction of fuel cell for transportation
2020
[3] The effect of type of mechanical processing on electrical conductivity and piezoresistive response of CNT and graphite composites
2019
[4] Effect of Dispersion by Three-Roll Milling on Electrical Properties and Filler Length of Carbon Nanotube Composites
2019
[5] Effects Of Wear Load On Mechanical And Morphological Properties Of A356 Matrix Carbon Nano Tube Composites
2019
[6] Microstructure and microwave absorbing properties of reduced graphene oxide/Ni/multi-walled carbon nanotubes/Fe3O4 filled monolayer cement–based absorber
2019
[7] Green Nanotechnology
2019
[8] A review of mechanical analyses of rectangular nanobeams and single-, double-, and multi-walled carbon nanotubes using Eringen's nonlocal elasticity theory
2019
[9] Carbon Nanotubes and Their Composites: A Review
2019
[10] Processing and Mechanical Properties of Carbon Nanotube Reinforced Metal Matrix Composites
2019
[11] Effect of radiation processing on physical properties of aminated MWCNTs/Poly (l-lactide) nanocomposites
2019
[12] A review on Nanocomposite Drug Delivery
2019
[13] Recent advances in nanomaterial-enabled acoustic devices for audible sound generation and detection
2019
[14] A Facile and Efficient Protocol for Preparing Residual-Free Single-Walled Carbon Nanotube Films for Stable Sensing Applications
2019
[15] Hydrogen storage in carbon materials—A review
2019
[16] Buckling behavior of various metallic glass nanocomposites reinforced by carbon nanotube and Cu nanowire: A molecular dynamics simulation study
2019
[17] Mechanical, electrical, and piezoresistivity behaviors of additively manufactured acrylonitrile butadiene styrene/carbon nanotube nanocomposites
2019
[18] Graphite platelet films deposited by spray technique on low density polyethylene substrates
2019
[19] Recent Studies In The Application Of Internal Cooling System In Conventional Machining Process
INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 2019
[20] Προσομοιώσεις μοριακής δυναμικής νανο-ενισχυμένων ακρυλικών πολυμερικών υλικών
2019
[21] Carbon Nanotube Composites
2019
[22] Carbon nanotubes agglomeration in reinforced composites: A review
2019
[23] Polyamide 66/ricinoleic acid-ethylene ethyl acrylate (PA 66/EEA-R. Acid) MWNT blend Nanocomposites
International Journal of ChemTech Research, 2019
[24] Carbon nanotubes: synthesis, properties and engineering applications
2019
[25] Medicion de la absorcion optica en nanoparticulas para el desarrollo de sensores plasmonicos
2019
[26] Optical and Electrical Properties of Double-Walled Carbon Nanotube/Polyaniline Composite
2019
[27] Thermoresistive Properties of Graphite Platelet Films Supported by Different Substrates
2019
[28] A derivative-free upscaled theory for analysis of defects
Journal of the Mechanics and Physics of Solids, 2019
[29] Influence of multi-walled carbon nanotube (MWCNT) concentration on the thermo-mechanical reliability properties of solderable anisotropic conductive adhesives …
Microelectronics Reliability, 2018
[30] EFFECTS OF MOBILE NANOPARTICLES ON THE MORPHOLOGY AND TOPOGRAPHY OF POLYSULFONE/POLYIMIDE THIN FILMS
2018
[31] Effect of carbon nanotube (CNT) concentration on flexural properties of flax hybrid bio-composite
AIP Conference Proceedings, 2018
[32] Elastomer-Based Composites with Reduced Zinc Oxide Level
2018
[33] Electrical Properties of Additively Manufactured Acrylonitrile Butadiene Styrene/Carbon Nanotube Nanocomposite
2018
[34] Multi-functional nanotechnology integration for aeronautical structures performance enhancement
2018
[35] Purification of Carbon Nanotubes—A Review of Methodology
2018
[36] Introduction of polymer-based nanocomposites
Polymer-based Nanocomposites for Energy and Environmental Applications, 2018
[37] INTELLIGENT REPLICATION OF NANO TUBE CHARACTERIZATION ANALYSIS OVER CNT NANO COMPOSITES
2018
[38] 6.11 Conductive Nanocomposites for Multifunctional Sensing Applications
2018
[39] Interaction of Carbon Nanomaterials with Biological Matrices
Environmental Toxicity of Nanomaterials, 2018
[40] In vitro biodegradation of poly(L-lactide) biopolymer reinforced with functionalized MWCNTs
Materials Today: Proceedings, 2018
[41] Collagen/aminated MWCNTs nanocomposites for biomedical applications
Materials Today Communications, 2018
[42] Synthesis and characterization of chiral poly (amide-imide) composite thin films containing functionalized multiwalled carbon nanotubes
Journal of Thermoplastic Composite Materials, 2018
[43] Grafting of CuFe12O19 nanoparticles on CNT and graphene: Eco-friendly synthesis, characterization and photocatalytic activity
Journal of Cleaner Production, 2018
[44] Tensile Properties of Hybrid Biocomposite Reinforced Epoxy Modified with Carbon Nanotube (CNT)
2018
[45] Application of electroless deposition for surface modification of the multiwall carbon nanotubes
Chemical Physics Letters, 2018
[46] Study on a new self-sensing magnetorheological elastomer bearing
AIP Conference Proceedings, 2018
[47] Characterization of poly (para-phenylene)-MWCNT solvent-cast composites
2018
[48] Concrete pavement prediction life model based on electrical response of concrete-CNTs sensors under fatigue loading
2018
[49] A Novel Sweating-Lubricating Epoxy Composite Coating Filled with Ionic-Liquid-Incorporated Hollow Silica Microspheres
Tribology Transactions, 2018
[50] Regulations for Safety Assessment of Nanomaterials
2018
[51] Nanotoxicity on Human and Plant Pathogenic Microbes and Aquatic Organisms
2018
[52] FEATURES OF SYNTHESIS OF COMPOSITE MATERIAL BASED ON SILICON DIOXIDE AND CARBON NANOTUBES
Siberian Journal of Science and Technology, 2018
[53] The Investigation and Development of the Displaced Foam Dispersion Technique for the Fabrication of Mechanoluminescent Fiber-reinforced Composites
2018
[54] Nonlinear vibration analysis of an embedded multi-walled carbon nanotube
2018
[55] 热处理对铜基碳纳米管复合镀膜结构和性能的影响
2017
[56] Preparation and electrical properties of polyimide/carbon nanotubes composites
Materials Science-Poland, 2017
[57] Investigation of manufactured carbon in the environment
ProQuest Dissertations Publishing, 2017
[58] Rubber blend nanocomposites
Progress in Rubber Nanocomposites, 2017
[59] Effect of carbon nanotubes (CNTs) on the properties of traditional cementitious materials
Construction and Building Materials, 2017
[60] Overview on the surface functionalization mechanism and determination of surface functional groups of plasma treated carbon nanotubes
Critical Reviews in Analytical Chemistry, 2017
[61] Physicomechanical properties of spark plasma sintered carbon nanotube-reinforced metal matrix nanocomposites
Progress in Materials Science, 2017
[62] Fluorination of Carbon Nanotubes− A Review
Journal of Fluorine Chemistry, 2017
[63] Nano-Charged Polypropylene Application: Realistic Perspectives for Enhancing Durability
Materials, 2017
[64] Recent Advances in New Catalysts for Fuel Oil Desulfurization
Current Organic Chemistry, 2017
[65] A competitive binding between O2 and epoxy with carbon nanotubes
AIP Conference Proceedings, 2017
[66] Controlled Synthesis of Low Dimensional Carbon Nanomaterials via Chemical Vapor Deposition
2017
[67] Effect of Matrix Modulus, CNT Thickness, and Interphase Volume Fraction on Mechanical Properties of CNT-basedPolymer Composite by Finite Element M
International Journal of Engineering Trends and Technology, 2017
[68] Carbon nanotube using spray pyrolysis: recent scenario
2017
[69] A Process Viability Study on Additive Manufactured BNNT-thermoplastic Heat Sinks
ProQuest Dissertations Publishing, 2017
[70] Synthesis of Cd doped ZnO/CNT nanocomposite by using microwave method: Photocatalytic behavior, adsorption and kinetic study
Results in Physics, 2017
[71] Influence of Plasma Jet Temperature Profiles in Arc Discharge Methods of Carbon Nanotubes Synthesis
Nanomaterials, 2017
[72] Optimization of thermo-mechanical performance of epoxy nanocomposites containing surface-modified graphene nanosheets using statistical analysis
Journal of Thermal Analysis and Calorimetry, 2017
[73] Photoluminescent Properties of Composites Based on the Liquid Crystal 5CB with Carbon Nanotubes
Journal of Applied Spectroscopy, 2017
[74] Advanced Dielectrophoresis for High-Performance Single-Walled Carbon Nanotube Electronics
2017
[75] The formation of a nanohybrid shish-kebab (NHSK) structure in melt-processed composites of poly (ethylene terephthalate)(PET) and multi-walled carbon nanotubes ( …
Polymer, 2017
[76] In Situ Biomimetic Synthesis of Gelatin-Carbon Nanotube-Hydroxyapatite Biocomposites as Bone Filler
2017
[77] Ultrasonically assisted compounding of CNT with polypropylenes of different molecular weights
Polymer, 2016
[78] A novel passive sampler for monitoring nanosilver in aquatic matrices
2016
[79] THE APPLICATION OF NANOTECHNOLOGY IN FIRE PROTECTION
2016
[80] A soft microfabricated capacitive sensor for high dynamic range strain sensing
2016
[81] Surface Treatments for Biological, Chemical and Physical Applications
2016
[82] Determining the surfactant consistent with concrete in order to achieve the maximum possible dispersion of multi
Journal of Nanotechnology, 2016
[83] Carbon nanotubes morphology and dispersion in nanocomposites
2016
[84] Nanoporous nanocomposite membranes via hybrid twin-screw extrusion—multijet electrospinning
Nanotechnology, 2016
[85] Zastosowanie nanotechnologii w ochronie przeciwpożarowej
Bezpieczeństwo i Technika Po?arnicza, 2016
[86] Heterogeneous Catalysis from the Perspective of Surface Science
2016
[87] The influence of catalyst factors for sustainable production of hydrocarbons via Fischer-Tropsch synthesis
Reviews in Chemical Engineering, 2016
[88] Carbon nanotube reinforced cementitious composites: An overview
Composites Part A: Applied Science and Manufacturing, 2016
[89] Determining the Surfactant Consistent with Concrete in order to Achieve the Maximum Possible Dispersion of Multiwalled Carbon Nanotubes in Keeping the Plain …
Journal of Nanotechnology, 2016
[90] 研製石墨烯複合碳材電極應用於海水及受金屬汙染廢水之電容脫鹽
臺灣成功大學學位論文, 2016
[91] STUDY OF ULTRASONIC TREATMENT ON PP/CNT, PP/GNP AND PP/CB COMPOSITES USING CONTINUOUS ULTRASONIC TWIN-SCREW EXTRUSION
2016
[92] A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing
RSC Advances, 2016
[93] Method for preventing, reducing and/or eliminating the fouling of a composite material
2016
[94] Interface analysis on an eutectic AlSi alloy reinforced with Ni coated MWCNT
Composites Part B: Engineering, 2016
[95] Structure, morphology, thermal, and electro-magnetic shielding properties of polystyrene microsphere/polyaniline/multi-walled carbon nanotube nanocomposite
2016
[96] Synthesis and characterization of niobium-promoted cobalt/iron catalysts supported on carbon nanotubes for the hydrogenation of carbon monoxide
Journal of Fuel Chemistry and Technology, 2016
[97] Numerical simulations of residual stress and inhomogeneous conductivity effects in CNT-filled resins cured by electric field.
Express Polymer Letters, 2016
[98] Nanomaterial Syntheses
Nanomaterial Characterization: Introduction, 2016
[99] Critical insights into understanding the effects of synthesis temperature and nitrogen doping towards charge storage capability and microwave shielding in nitrogen-doped carbon nanotube/polymer nanocomposites
RSC Advances, 2016
[100] Computer simulations of nanotube networks in dielectric matrix
2016
[101] Carbon nanomaterials: production, impact on plant development, agricultural and environmental applications
2016
[102] Ultrasonic twin screw compounding of polypropylene with carbon nanotubes, graphene nanoplates and carbon black
European Polymer Journal, 2016
[103] Comparing the properties of Bombyx mori silk cocoons against sericin-fibroin regummed biocomposite sheets
Materials Science and Engineering: C, 2016
[104] Exposures to nanoparticles and fibers during injection molding and recycling of carbon nanotube reinforced polycarbonate composites
Journal of Exposure Science and Environmental Epidemiology, 2016
[105] Nanocomposites
Characterization of Carbon Nanotube Based Composites under Consideration of Defects, 2016
[106] Ultrasonically aided extrusion in preparation of polymer composites with carbon fillers
Dissertation, University of Akron, 2016
[107] Fabrication of Al2O3–Ni–CNTs nanocomposites by co-precipitation of CNTs and Ni nanoparticle on Al2O3 powder and spark plasma sintering
Journal of the Ceramic Society of Japan, 2016
[108] ОПТИЧНІ ТА СТРУКТУРНІ ВЛАСТИВОСТІ КОМПОЗИТІВ НА ОСНОВІ ЦІАНОБІФЕНІЛУ І НЕОРГАНІЧНИХ НАНОЧАСТИНОК
2016
[109] Attributes of Polymer and Silica Nanoparticle Composites: A Review
Journal of Cosmetic and Laser Therapy, 2016
[110] High frequency millimetre wave absorbers derived from polymeric nanocomposites
Polymer, 2016
[111] Synthesis and Charactirezation of Surface-activated Multiwalled Carbon Nanotubes-polymer Composite Electrospun Nanofiber
Thesis, 2016
[112] warwick. ac. uk/lib-publications
2016
[113] The effect of carbon nanotubes/bioglass nanocomposite on mechanical and bioactivity properties of glass ionomer cement
Scientia Iranica, 2016
[114] Chemical stabilization of soils using carbon nanotubes
2016
[115] ФОТОЛЮМИНЕСЦЕНТНЫЕ СВОЙСТВА КОМПОЗИТОВ НА ОСНОВЕ ЖИДКОГО КРИСТАЛЛА 5СВ С УГЛЕРОДНЫМИ НАНОТРУБКАМИ
2016
[116] Silk Biocomposites: Structure and Chemistry
2016
[117] Electrical properties study of carbon fillers in polymer nanocomposites
2016
[118] A study on the design and cooling of the heat sink with hybrid structure of conductive polymer composite and metal
2016
[119] Nanostructures, nanomaterials, and nanotechnologies to nanoindustry
2016
[120] Study of Ultrasonic Treatment on PP/CNT, PP/GNP and PP/CB Composites Using Continuous Ultrasonic Twin-Screw Extrusion
SPE ANTEC? Indianapolis, 2016
[121] Magnetization studies of polystyrene/multiwall carbon nanotube composite films
2015
[122] Strategies for Bone Replacement and Tissue Augmentation
Handbook of Materials Structures, Properties, Processing and Performance, 2015
[123] The Methanol Response Sensing Properties Using MWCNT-ZnO Composite
Advanced Materials Research, 2015
[124] Karbon nanotüp ve polivinil alkol nanoelyafla güçlendirilmiş epoksi yapıştırıcıların alüminyum bağlantılar üzerindeki kırılma davranışları
2015
[125] Изучение свойств полипропиленовых комплексных волокон модифицированных углеродными наполнителями
2015
[126] Karbon nanotüp ve bor nitrür nanodisk içeren filaman sarım karbon elyaf takviyeli nanokompozit boruların yorulma davranışı
2015
[127] HYBRID NANOCOMPOSITES-A REVIEW.
Applied Mechanics & Materials, 2015
[128] Develop a bladder assisted RTM tool to manufacture seat posts with glass fiber and CNT-epoxy resin
2015
[129] Processing, Structure and Properties of Poly (ethylene terephthalate)/Carbon Micro-and Nano-composites
2015
[130] Hybrid Nanocomposites–A Review
2015
[131] Microwave absorbers designed from PVDF/SAN blends containing multiwall carbon nanotubes anchored cobalt ferrite via a pyrene derivative
Journal of Materials Chemistry A, 2015
[132] One-pot synthesis of aminated multi-walled carbon nanotube using thiol-ene click chemistry for improvement of epoxy nanocomposites properties
RSC Advances, 2015
[133] Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance
Aerospace Science and Technology, 2015
[134] Copper-CNT Hybrid TSVs: Thermo-Mechanical Stresses and Reliability Analysis
International Journal of High Speed Electronics and Systems, 2015
[135] Effect of viscosity reducing agent on the properties of CNT/epoxy nanocomposites
Journal of Polymer Engineering, 2015
[136] Fabrication and Mechanical Properties of AlSi12 Nano Particulate Composite
Procedia Materials Science, 2015
[137] Electrochemical synthesis of polypyrrole nanowires on carbon nanotube-coated carbon fibers
Journal of Solid State Electrochemistry, 2015
[138] Characterization of Potential Exposures to Nanoparticles and Fibers during Manufacturing and Recycling of Carbon Nanotube Reinforced Polypropylene Composites
Annals of Occupational Hygiene, 2015
[139] Effect of Amide Functionalization and Precuring on Tensile Properties of MWCNT/Epoxy Nanocomposites
Macromolecular Symposia, 2015
[140] Carbon Nanofibers: Synthesis, Properties and Applications
Polymer Nanocomposites Based on Inorganic and Organic Nanomaterials, 2015
[141] Effect of CNTs on Hardness and Thermogravimetric Properties of LM6 Nanoparticulate Composite
Materials Today: Proceedings, 2015
[142] Reinforcing Effects of Poly (D-Lactide)-g-Multiwall Carbon Nanotubes on Polylactide Nanocomposites
Journal of Nanoscience and Nanotechnology, 2015
[143] Applications of Carbon Nanotubs and Other Nanomagnetic Nanowires
Session 3A0, 2015
[144] Carbon Nanotubes in Liquid Crystals: Fundamental Properties and Applications
Physics of Liquid Matter: Modern Problems, 2015
[145] Remarkably stable high power Li-ion battery anodes based on vertically arranged multilayered-graphene
Electrochimica Acta, 2015
[146] New Attenuation Predictive Model for Carbon-Based Nanocomposites
Nanotechnology, IEEE Transactions on, 2015
[147] Decoration of magnesium oxide nanoparticles on O-MWCNTs and its antibacterial studies
Rendiconti Lincei, 2015
[148] Influence of multi-walled carbon nanotube (MWNT) concentration on the interconnection properties of solderable anisotropic conductive adhesives (SACAs)
Journal of Materials Science: Materials in Electronics, 2015
[149] p-Amino phenol immobilized on multi-walled carbon nanotubes for the preparation of chitosan nanocomposites
Journal of Composite Materials, 2015
[150] Preparation and characterization of polyaniline, multiwall carbon nanotubes, and starch bionanocomposite material for potential bioanalytical applications
Polymer Composites, 2015
[151] Correlation between electrical conductivity and manufacturing processes of nanofilled Carbon Fiber Reinforced Composites
Composites Part B: Engineering, 2015
[152] ISSUES IN PRODUCTION OF CARBON NANOTUBES AND RELATED NANOCOMPOSITES: A COMPREHENSIVE REVIEW
CELLULOSE CHEMISTRY AND TECHNOLOGY, 2015
[153] Covalently functionalized carbon nanostructures and methods for their separation
2015
[154] Thermal, mechanical and tribological properties of polyamide 6 matrix composites containing different carbon nanofillers
Journal of Polymer Engineering, 2015
[155] Effective formulation and processing of nanofilled carbon fiber reinforced composites
RSC Advances, 2015
[156] Relationships between nanofiller morphology and viscoelastic properties in CNF/epoxy resins
Polymer Composites, 2015
[157] Carbon Nanotubes: Theoretical Concepts and Research Strategies for Engineers
2015
[158] Effect of aligned ferromagnetic particles on strain sensitivity of multi-walled carbon nanotube/polydimethylsiloxane sensors
Applied Physics Letters, 2015
[159] Comparative evaluation of piezoresistivity of CNTs/cement composites measured by AC and DC technique
2015
[160] Mechanical, fatigue and wear properties of sintered Carbon Nanotube-based functionally graded materials
2015
[161] Influence of carbon nanofillers on the curing kinetics of epoxy-amine resin
RSC Advances, 2015
[162] Application of atmospheric pressure plasma in polymer and composite adhesion
2015
[163] Etudes thermodynamiques et structurales du nanocomposite polyethylene contenant des nanotubes de carbone multiparois.
2015
[164] Classification of Composite Materials and Structures
Handbook of Materials Structures, Properties, Processing and Performance, 2015
[165] Investigation of polymer nanocomposites reinforced with nanocarbon
ProQuest Dissertations Publishing, 2015
[166] Mathematical modelling in nanotechnology using calculus of variations
2015
[167] Characterization and Modeling of Ferromagnetic Particulate Nanocomposites for Strain and Fracture Sensing
ProQuest Dissertations Publishing, 2015
[168] Examples of Man-Made Composite Structures
2015
[169] Radiation resistant metal decorated MWCNTs/PMMA nanocomposite films with enhanced thermomechanical properties
Polymer Composites, 2015
[170] Dielectric Properties of Elastomeric Modified Epoxies
Micro and Nanostructured Epoxy/Rubber Blends, 2014
[171] Modeling of Carbon Nanotube Composites Based on Nonlocal Elasticity Approach
International Journal for Computational Methods in Engineering Science and Mechanics , 2014
[172] Manufacturing, Testing of Polymer Nanocomposite and Analysis of Tennis Racket Frame
International Journal of Engineering and Technology, 2014
[173] Cost-effective open microwave heating of polymer resin using interdigital electrode array film and dispersed carbon nanotubes
Composites Science and Technology, 2014
[174] Hierarchical Porous Structures Functionalized with Silver Nanoparticles: adaptation for antibacterial applications
2014
[175] CHARACTERISTICS AND PROPERTIES OF EPOXY/POLYSULFIDE COMPOSITE MATERIALS REINFORCED BY CARBON NANOTUBES
2014
[176] Dynamic‐mechanical analysis of MWNTs‐filled PC/ABS blends
Polymer Engineering & Science, 2014
[177] Production of Carbon Nanotube by Electric Arc Discharge Method
2014
[178] Effect of Multi-Wall Carbon Nanotubes on the Properties of Natural Rubber Nanocomposites
Advanced Materials Research, 2014
[179] Characterization of the mechanical and moisture absorption properties of kenaf reinforced polypropylene composites
2014
[180] Simulation of transient processes of the catalytic synthesis of carbon nanotubes in a fluidized bed
Theoretical Foundations of Chemical Engineering, 2014
[181] Surfactant Assisted Dispersion of Single-Walled Carbon Nanotubes in Polyvinylpyrrolidone Solutions
2014
[182] Computational structural modeling and mechanical behavior of carbon nanotube reinforced aluminum matrix composites
Materials Science and Engineering: A, 2014
[183] Investigations on the surface characteristics of grinding and edm processes using carbon nanotubes
2014
[184] Characterization of Multiwalled Carbon Nanotube-Reinforced Hydroxyapatite Composites Consolidated by Spark Plasma Sintering
BioMed research international, 2014
[185] Nanocomposites–An Overview
2014
[186] Investigation on production and characterization of bionanocomposites based on surface functionalized multi-walled carbon nanotubes and optically active poly (ester-imide) having L-isoleucine units
Progress in Organic Coatings, 2014
[187] Analysis of Mechanical Properties of Carbon Nanotube Reinforced Polymer Composites Using Continuum Mechanics Approach
Procedia Materials Science, 2014
[188] Rheological behaviour of submicron mullite–carbon nanofiber suspensions for Atmospheric Plasma Spraying coatings
Journal of the European Ceramic Society, 2014
[189] Photocatalytic TiO2/Carbon Nanotube Nanocomposites for Environmental Applications: An Overview and Recent Developments
Fullerenes, Nanotubes and Carbon Nanostructures, 2014
[190] Development of epoxy mixtures for application in aeronautics and aerospace
RSC Advances, 2014
[191] Mechanical property characterization of carbon nanotube modified polymeric nanocomposites by computer modeling
Composites Part B: Engineering, 2014
[192] 11-multifunctional materials and nanotechnology for assessing and monitoring civil infrastructures
2014
[193] Use of graphene oxide functionalized with Grubbs and Hoveyda Grubbs catalyst to activate metathesis reaction in epoxy mixtures
AIP Conference Proceedings, 2014
[194] Carbon Nanotubes
Proceedings of National Conference on Recent Advances in Electronics and Communication Engineering, 2014
[195] 分散奈米碳管摻雜建築材料油漆對電磁波屏蔽之研究
機械技師學刊, 2014
[196] 以共價與非共價方法改質奈米碳管與市售石墨烯應用於聚醯亞胺奈米複合材料
臺北科技大學學位論文, 2014
[197] Comparative studies on the processing and performance of carbon nanotube and nanofibre based multi-scale composites
2014
[198] Studies of Mechanical Properties of Multiwall Nanotube Based Polymer Composites
Journal of Nanotechnology in Engineering and Medicine, 2014
[199] Investigating solid-state supercapacitors constructed with PVA/CNT nanocomposite electrolytes
2014
[200] Curvature, Hybridization and Contamination of Carbon Nanostructures Analysis Using Electron Microscopy and XANES Spectroscopy
Materials Sciences and Applications, 2014
[201] Physical and Mechanical Characterization of Multiwall Carbon Nanotube Reinforced LM13 Alloy Composite
International Journal of Research, 2014
[202] Enhanced oxidized regenerated cellulose with functionalized multiwalled carbon nanotubes for hemostasis applications
RSC Advances, 2014
[203] Statistical evaluation of the effect of carbon nanofibre content on tribological properties of epoxy nanocomposites
Journal of Composite Materials , 2014
[204] Návrh fluorescen?ního mikroskopu pro spektroskopii uhlíkovych nanotrubi?ek
2014
[205] ADVANCED ALUMINUM ALLOYS FOR HIGH PERFORMANCE CASTINGS
2014
[206] Multifunctional materials and nanotechnology for assessing and monitoring civil infrastructures
Sensor Technologies for Civil Infrastructures: Sensing Hardware and Data Collection Methods for Performance Assessment, 2014
[207] Influence of nanofiller morphology on the viscoelastic properties of CNF/epoxy resins
2014
[208] Analysis of hardness test for aluminium carbon nanotube metal matrix and graphene
Indian Journal of Engineering, 2014
[209] Extensive Pertinence of Carbon Nanotubes
2014
[210] МОДЕЛИРОВАНИЕ НЕСТАЦИОНАРНЫХ ПРОЦЕССОВ КАТАЛИТИЧЕСКОГО СИНТЕЗА УГЛЕРОДНЫХ НАНОТРУБОК В ПСЕВДООЖИЖЕННОМ СЛОЕ
2014
[211] Nanocomposites of Multiphase Polymer Blend Reinforced with Carbon Nanotubes: Processing and Characterization
2014
[212] Nanostructured Materials and Nanotechnology VI Edited by Sanjay Mathur and Suprakas Sinha Ray Copyright© 2013 The American Ceramic Society
2013
[213] EFFECT OF FUNCTIONALIZATION ON THE STRENGTH OF MULTI-WALL CARBON NANOTUBES-POLYPROPYLENE (MWCNTs-PP) COMPOSITE
Dissertation, 2013
[214] Microstructural tuning of glassy carbon for electrical and electrochemical sensor applications
ProQuest Dissertations Publishing, 2013
[215] Demonstration of photovoltaic properties of titanium dioxide coated single wall carbon nanotubes manufactured by novel sonochemical technique
ProQuest Dissertations Publishing, 2013
[216] Bio-composite nanomaterials; characterization, manipulation and application
ProQuest Dissertations Publishing, 2013
[217] CNT/PVDF 압전 복합막의 제작과 전기적 특성
2013
[218] 스프레이 코팅법으로 제조된 CNT/PVDF 압전 복합막의자기분극 메커니즘
2013
[219] Capacitance and Output Current Control by CNT Concentration in the CNT/PVDF Composite Films for Electronic Devices
The transactions of The Korean Institute of Electrical Engineers, 2013
[220] Self-poling Mechanism of CNT/PVDF Piezoelectric Composite Films Prepared by Spray Coating Method
Journal of the Korean Institute of Electrical and Electronic Material Engineers, 2013
[221] Effect of Nickel Catalyst on Carbon Nanotubes by Using Palm Oil as a Starting Material
Advanced Materials Research, 2013
[222] Carbon Nanotube Synthesis with High Purity by Introducing of NH 3 Etching Gas
The Transactions of The Korean Institute of Electrical Engineers, 2013
[223] Investigating the Role of Aromaticity of Copolymers for Graphitic Carbon Black Aqueous Dispersions
Soft Materials, 2013
[224] Enhanced thermal and electrical properties of poly ( D, L-lactide)/multi-walled carbon nanotubes composites by in-situ polymerization
Transactions of Nonferrous Metals Society of China, 2013
[225] PERTUMBUHAN KARBON NANOTUBE METODE CHEMICAL VAPOR DEPOSITION SEBAGAI FUNGSI WAKTU
EKUILIBRIUM, 2013
[226] 多壁碳纳米管-聚乳酸复合材料的原位聚合制备及热性能和导电性能(英文)
中国有色金属学报: 英文版 , 2013
[227] SISTEMA DE NANOSEGURIDAD PARA PRáCTICAS SEGURAS A ESCALA DE LABORATORIO
D Soguero, J Castillo, L Desdín - sbpr.org.br, 2013
[228] The influence of AC and DC electrical resistance and piezoresistivity measurements of CNTs/Cement composites
The New Boundaries of Structural Concrete. ImReady, 2013
[229] Síntese, caracterização e aplicação do óxido de grafite e grafeno em estudos eletroquímicos envolvendo ácido ascórbico, ácido úrico, dopamina e epinefrina
2013
[230] Fabrication of CNT/PVDF Composite Film and Its Electrical Properties
2013
[231] Functionalization of MWCNT with P (MMA-co-S) copolymers via ATRP: Influence on localization of MWCNT in SAN/PPE 40/60 blends and on rheological and dielectric properties of the composites
Polymer, 2013
[232] PVA-Modified Carbons for Enhanced Boron Adsorption
2013
[233] Preparazione e caratterizzazione di nanocompositi strutturali costituiti da poliammide e carbonio nanostrutturato
2013
[234] Nanocomposites nanotubes de carbone-céramique à microstructure contrôlée: préparation et propriétés
2013
[235] 암모니아 식각 가스 도입에 의한 고순도 탄소나노튜브의 합성
The Transactions of The Korean Institute of Electrical Engineers, 2013
[236] 전자소자로의 응용을 위한 CNT/PVDF 복합막에서 CNT 조성에 의한 정전용량과 출력전류 제어
2013
[237] Multi-walled Carbon Nanotube Reinforced Glass Ionomer Cements for Dental Restorations
Trends in Biomaterials and Artificial Organs, 2013
[238] Polymer Nanocomposites: Conductivity, Deformations and Photoactuation
Responsive Photonic Nanostructures: Smart Nanoscale Optical Materials, 2013
[239] Polyamide 66/Maleic Anhydride Ethylene Ethyl Acrylate (PA 66/EEA-g-MA) MWNT Blend Nanocomposites
Turkish Journal of Science & Technology, 2013
[240] Carbon nanotube-reinforced siloxane-PMMA hybrid coatings with high corrosion resistance
Progress in Organic Coatings , 2013
[241] Impedance characteristics and conductivity of CNT/ABS nanocomposites
Journal of Physics D: Applied Physics, 2013
[242] Effect of carbon nanotube lengths on the mechanical properties of epoxy resin: An experimental study
Journal of Composite Materials, 2013
[243] The role of carbon nanofiber defects on the electrical and mechanical properties of CNF-based resins
Nanotechnology, 2013
[244] Hybrids of conductive polymer nanocomposites
Materials & Design, 2013
[245] A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites
Journal of Nanomaterials, 2013
[246] Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite
Materials & Design, 2013
[247] Morphology, thermal stability, and electrical conductivity of polymer nanocomposites of isotactic polypropylene/multi-walled carbon nanotubes
International Journal of Polymeric Materials and Polymeric Biomaterials, 2013
[248] Densely Packed Linear Assembles of Carbon Nanotube Bundles in Polysiloxane-Based Nanocomposite Films
Journal of Nanomaterials, 2013
[249] Plastic membrane, carbon paste and multiwalled carbon nanotube composite coated copper wire sensors for determination of oxeladin citrate using batch and flow injection techniques
Journal of Materials Science & Technology, 2013
[250] Poly (N‐vinyl carbazole)(PNVCz)‐based composite materials: Electrical properties, morphologic, and thermal characterization of PNVCz/MWCNTs and PNVCz/o‐GLs systems
Polymer Composites, 2013
[251] Carbon nanotube composite PVC coated stainless steel disc electrode for detection of Ga (III)
International Journal of Environmental Analytical Chemistry , 2013
[252] 超长定向含铁多壁碳纳米管阵列的制备
强激光与粒子束, 2013
[253] Processing and performance of carbon/epoxy multi-scale composites containing carbon nanofibres and single walled carbon nanotubes
Journal of Polymer Research, 2013
[254] Carbon Nanotubes Prepared by Thermal-CVD of from Palm Oil
Advanced Materials Research , 2013
[255] Thermal and thermomechanical behavior of amino functionalized and metal decorated MWCNTs/PMMA nanocomposite films
Polymer Composites, 2013
[256] Interfacial effects in the electrical conductivity and viscous deformation of multiwall carbon nanotube–epoxy composites prepared by sonication
Journal of Composite Materials, 2013
[257] Functionalization of Multi-walled Carbon Nanotubes and Localization of Functionalized Multi-walled Carbon Nanotubes in an SAN/PPE Blend
2013
[258] PREPARATION CONDUCTIVE NYLON 6 NANOFIBER FOR MEDICAL APPLICATION
2013
[259] Mechanical Dispersion Methods for Carbon Nanotubes in Aerospace Composite Matrix Systems
Carbon Nanotube Enhanced Aerospace Composite Materials. Springer Netherlands, 2013
[260] Stainless Steel Polymer Composites
Wiley Encyclopedia of Composites, 2012
[261] A Conductivity Testing System Coupled with a Tensile Testing Machine to Measure the Surface Properties of Polymer Specimens
2012
[262] Effect of Pressure and Temperature on Electrical Conductivity of CNT-PEEK Composites
2012
[263] Influence factors on the tensile properties of MWCNT buckypaper/epoxy composites
Acta Materiae Compositae Sinica , 2012
[264] Percolation in a random network of conducting nanotubes: a computer simulation study
2012
[265] Multi-Walled Carbon Nanotubes Effect on Mechanical Properties of High Performance Fiber/Epoxy Nanocomposite
Materials with Complex Behaviour II. Springer Berlin Heidelberg, 2012
[266] Effect of carbon nanofiber functionalization on the in‐plane mechanical properties of carbon/epoxy multiscale composites
Journal of Applied Polymer Science , 2012
[267] A review on modeling of the thermal conductivity of polymeric nanocomposites
e-Polymers, 2012
[268] Incubation Processes in Nematic 5CB+ Multi-Walled Carbon Nanotubes Composites: Induced Optical Singularities and Inversion Walls, Percolation Phenomena
Nonlinear Optics Quantum Optics-Concepts in Modern Optics, 2012
[269] 阻燃聚烯烃/碳纳米管复合材料研究进展
中国塑料, 2012
[270] Recent Advances in Skin-Inspired Sensors Enabled by Nanotechnology
JOM, 2012
[271] Investigation of the Behavior of the Nickel Catalyst in Chemical Vapor Deposition Synthesis of Carbon Nanopearls
2012
[272] Surface silanization of carbon nanofibers and nanotubes for altering the properties of epoxy composites
2012
[273] Electrical Characterization of Strain Effects on Bacterial Nanocellulose Treated with Carbon Nanoparticles
2012
[274] Multiwall carbon nanotube-filled natural rubber: electrical and mechanical properties
eXPRESS Polymer Letters, 2012
[275] Effects of the carbon nanotube distribution on the macroscopic stiffness of composite materials
Computational Materials Science, 2012
[276] Two faces of carbon nanotube: toxicities and pharmaceutical applications
Critical Reviews? in Therapeutic Drug Carrier Systems, 2012
[277] Tensile and impact properties of three-component PP/wood/elastomer composites
Express Polym Lett, 2012
[278] Nanomedicine: Potential devices for diagnostics
Recent Patents on Nanomedicine, 2012
[279] Electrical properties of multi walled carbon nanotubes/poly (vinylidene fluoride/trifluoroethylene) nanocomposites
Journal of Polymer Research, 2012
[280] Diameter dependent electronic properties of zigzag single wall BX (X= N, P, As) nanotubes: ab-initio study
Journal of Computational and Theoretical Nanoscience, 2012
[281] Investigating the effectiveness of PEO/PPO based copolymers as dispersing agents for graphitic carbon black aqueous dispersions
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012
[282] Functionalization of nanoscale articles including nanotubes and fullerenes
US Patent 8,212,132, 2012
[283] Measuring of electrical properties of MWNT-reinforced PAN nanocomposites
Journal of Nanomaterials, 2012
[284] Corrosion Resistant Coatings Based on Organic-Inorganic Hybrids Reinforced by Carbon Nanotubes
2012
[285] Dielectric and microwave properties of carbon nanotubes/carbon black filled natural rubber composites
Plastics, Rubber and Composites, 2012
[286] Functionalized Carbon Nanotubes with Gold Nanoparticles to Fabricate a Sensor for Hydrogen Peroxide Determination
Journal of Chemistry, 2012
[287] Influence of multiwall carbon nanotubes on morphological and structural changes during UV irradiation of syndiotactic polypropylene films
Journal of Polymer Science Part B: Polymer Physics , 2012
[288] Thermal conductivity of polymer/carbon nanotube composites
Materials Science Forum, 2012
[289] Synthesis control for carbon nanowalls on copper supports pro development of green energy applications
e-Journal of Surface Science and Nanotechnology, 2012
[290] Durability of MWCNT Composites under Electron and Neutron Irradiation
2012
[291] Θερμικός και ηλεκτρικός/διηλεκτρικός χαρακτηρισμός νανοσύνθετων πολύ (τερεφθαλικού αιθυλενίου)/νανοσωλήνων άνθρακα
2012
[292] 2304 Friction Force Reduction on Carbon Nanotube (CNT) Films by Oscillating Motions under Micronewton Loads: Oscillation Frequency Dependence
2012
[293] Electrical properties of multi-walled carbon nanotube/tetrafunctional epoxy-amine composites
AIP Conference Proceedings, 2012
[294] Sıcak filament destekli kimyasal buhar biriktirme yöntemi ile karbon nanotüp yüzey modifikasyonu
2012
[295] Preparation and Characterization of Functional Polyimide Composites Synthesized Via A Solution-Coating Process
2012
[296] Explosive Trace Detection Service Model
2012
[297] Hybrid Bioactive Hydrogels Containing Single-Walled Carbon Nanotubes Covalently Integrated via Strain-Promoted Azide-Alkyne Cycloaddition
Nanoscience & Nanotechnology-Asia, 2012
[298] 多壁碳纳米管对水中腐殖酸的吸附行为研究
陕西科技大学学报: 自然科学版, 2012
[299] Sistema de seguridad para elaborar nanopartículas de carbono a escala de laboratorio
Revista de Salud Ambiental , 2012
[300] 多壁巴基纸/环氧复合材料拉伸性能的影响因素
复合材料学报, 2012
[301] 胶原纤维吸附剂的研究进展
陕西科技大学学报: 自然科学版, 2012
[302] Improved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning
Carbon, 2012
[303] Viscous Deformation and Electrical Conductivity of MWNT Epoxy Composites
2012
[304] CARBON NANOTUBES AND THEIR COMPOSITES: A REVIE
2012
[305] Aligned Small Diameter Single-Walled Carbon Nanotube Membrane for Reverse Osmosis Desalination of Water
2012
[306] Conductively filled Poly (methyl methacrylate) composites; manufacture and testing processes for EMI shielding effectiveness.
2012
[307] Carbon Nanotubes for Epoxy Nanocomposites: A Review on Recent Developments
2012
[308] Zeta potential of modified multi-walled carbon nanotubes in presence of poly (vinyl alcohol) hydrogel
2012
[309] Multifunctional carbon/epoxy glass microballons nanocomposite
2012
[310] Carbon nanotube dispersion and characteristics: Thermomechanical properties and conductivity of polyimide nanocomposites
ProQuest Dissertations Publishing, 2012
[311] Electron Interactions in Carbon Nanomaterials
2012
[312] Biomedical/bioengineering applications of carbon nanotube-based nanocomposites
Polymer–Carbon Nanotube Composites, 2011
[313] PROPUESTA DE EQUIDAD SALARIAL BASADA EN UN MODELO UNIVERSITARIO
Thesis, 2011
[314] Fluidos aquosos baseados em poliacrilamida e nanotubos de carbono
2011
[315] Karışık Jellerde Faz Geçişleri
2011
[316] Вплив низькоінтенсивного електромагнітного випромінювання міліметрового діапазону на процеси життєдіяльності дріжджів Saccharomyces cerevisiae в агресивному середовищі
ХІМІЯ, ФІЗИКА ТА ТЕХНОЛОГІЯ ПОВЕРХНІ, 2011
[317] Heat Transfer in Multi-Phase Materials
Advanced Structured Materials, 2011
[318] Cognitive Radio Sensor Node Empowered Mobile Phone for Explosive Trace Detection
International Journal of Communications, Network and System Sciences, 2011
[319] Material characterisation and in vitro biological investigation into acrylic bone cements incorporating multi-walled carbon nanotubes (MWCNTs)
2011
[320] Simulation of carrier transport through Single Wall Carbon Nanotubes (SWNT)
International Journal of Engineering Science and Technology, 2011
[321] Photoconductivity of nanocomposited MEH-PPV: CNTs thin film for organic solar cells application
Electronic Devices, Systems and Applications (ICEDSA), 2011 International Conference on, 2011
[322] Effect of carbon nanofiber dispersion on the tensile properties of epoxy nanocomposites
Journal of Composite Materials, 2011
[323] 聚合物/碳纳米管纳米复合材料性能研究进展
高分子材料科学与工程, 2011
[324] Advance polymeric carbon nanocomposite films with enhanced thermo‐mechanical properties
Polymer Composites , 2011
[325] Graphite fiber composites interlayered with single-walled carbon nanotubes
Journal of Composite Materials, 2011
[326] Development of carbon nanofibre incorporated three phase carbon/epoxy composites with enhanced mechanical, electrical and thermal properties
Composites Part A: Applied Science and Manufacturing, 2011
[327] Multifunctional and smart carbon nanotube reinforced cement-based materials
Nanotechnology in Civil Infrastructure, 2011
[328] Microstructure and incubation processes in composite liquid crystalline material (5CB) filled with multi walled carbon nanotubes
Materialwissenschaft und Werkstofftechnik, 2011
[329] Influence of carbon nanotube–polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene
Composites Science and Technology, 2011
[330] Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review
Progress in polymer science, 2011
[331] Nanotoxicology and nanoparticle safety in biomedical designs
Int J Nanomedicine, 2011
[332] Nanocomposite nanofibers of poly (d, l-lactic-co-glycolic acid) and graphene oxide nanosheets
Composites Part A: Applied Science and Manufacturing, 2011
[333] Protein biosensors based on polymer nanowires, carbon nanotubes and zinc oxide nanorods
Sensors, 2011
[334] Adaptive Neuro-Fuzzy Modeling of Mechanical Behavior for Vertically Aligned Carbon Nanotube Turfs
Journal of Materials Science & Technology, 2011
[335] EFFECT OF CNT LENGTH AND INTERFACE WAVINESS ON EFFECTIVE MATERIAL CONSTANT (Ez) OF CNT-BASED COMPOSITE MATERIAL
MM Hasan, MSJ Hossain, AKM Masud - buet.ac.bd, 2011
[336] Role of multiwalled carbon nanotube in interlaminar shear strength of epoxy/glass fiber/multi walled carbon nanotube hybrid composites
2011
[337] handling and characterization of carbon nanotubes inside the scanning electron microscope
B Nelson - uni-oldenburg.de, 2011
[338] CHEMISTRY, PHYSICS AND TECHNOLOGY OF SURFACE
OM Garkusha, AN Bagatskaya, SN Makhno, PP Gorbik - cpts.com.ua, 2011
[339] Electrical and Thermal Experimental Characterization and Modeling of Carbon Nanotube/Epoxy Composites
2011
[340] Thermomechanical and rheological behaviour of polymer nanocomposites based on ethylene-methyl acrylate (EMA) and multiwalled carbon nanotube (MWNT)
Plastics, Rubber and Composites, 2011
[341] Microwave Assisted Synthesis and Characterization of Silver/Gold Nanoparticles Loaded Carbon Nanotubes
Nanostructured Materials and Nanotechnology V: Ceramic Engineering and Science Proceedings, 2011
[342] Carbon Nanotube Filled Composite Material Analysis Utilizing Nano and Conventional Testing Techniques
NIP & Digital Fabrication Conference. Vol. 2010. No. 2. Society for Imaging Science and Technology, 2010
[343] AFM as a Robot for Automated Nanohandling
2010 International Conference on Control Automation and Systems (ICCAS), 2010
[344] Mechanical properties of epoxy reinforced with homogeneously dispersed carbon nanofibre
International Journal of Plastics Technology, 2010
[345] PROCESS-PROPERTIES RELATIONSHIPS OF THERMOPLASTIC POLYURETHANE BASED MATERIALS FILLED WITH CARBON NANOTUBES
2010
[346] Effects of grafted chain length on mechanical and electrical properties of nanocomposites containing polylactide-grafted carbon nanotubes
Composites Science and Technology, 2010
[347] Composite materials based on silk proteins
Progress in Polymer Science, 2010
[348] Localization of carbon nanotubes at the interface in blends of polyamide and ethylene–acrylate copolymer
Polymer, 2010
[349] Cellulose acetate/multiwalled carbon nanotube nanocomposites with improved mechanical, thermal, and electrical properties
Journal of applied polymer science, 2010
[350] Characterization of exposures to nanoscale particles and fibers during solid core drilling of hybrid carbon nanotube advanced composites
International journal of occupational and environmental health, 2010
[351] Mechanical modelling of carbon nanomaterials from nanotubes to buckypaper
Carbon, 2010
[352] 碳纳米管表面化学改性研究进展[J]
塑料, 2010
[353] Polyimides containing nitrile groups and nanocomposites based on them
Rev Roum Chim, 2010
[354] PROPERITES AND APPLICATIONS OF CARBON NANOTUBES
2010
[355] Aggregates of multiwalled carbon nanotubes in nematic liquid crystal dispersions: experimental evidence and a physical picture
2010
[356] Κατασκευή-μοντελοποίηση και μελέτη της φυσικής και μηχανικής συμπεριφοράς σύνθετων υλικών πολυμερικής μήτρας ενισχυμένης με νανοσωλήνες άνθρακα
2010
[357] Impact of single walled carbon nanotubes (SWNTs) on wastewater microbial communities
ProQuest Dissertations Publishing, 2010
[358] Carbon nanostructures: production and characterization
2010
[359] 聚合物理想的增强剂和改性剂——碳纳米管
塑料助剂, 2010
[360] СТРУКТУРНІ ОСОБЛИВОСТІ ТА ВЛАСТИВОСТІ ПОЛІМЕРНИХ НАНОКОМПОЗИТІВ ПРИ НИЗЬКИХ КОНЦЕНТРАЦІЯХ НАПОВНЮВАЧА
Хімія, фізика та технологія поверхні, 2010
[361] ХИМИЯ, ФИЗИКА И ТЕХНОЛОГИЯ ПОВЕРХНОСТИ
ОМ Гаркуша, АН Багацкая, СН Махно, ПП Горбик - cpts.com.ua, 2010
[362] Fabrication and Investigation of Damping Properties of Nano Particulate Composites
Journal of Minerals and Materials Characterization and Engineering, 2010
[363] Fabrication of novel, structured, bimodal particle and CNT composites, with low percolation thresholds.
2010
[364] Biosensors based on carbon nanotube field effect transistors (CNTFETs) for detecting pathogenic microorganisms
2010
[365] FUNCTIONALIZATION OF MULTI-WALLED CARBON NANOTUBES FOR ENHANCEMENT OF THERMO-MECHANICAL PROPERTIES OF DIELECTRIC …
2010
[366] Nanocompuestos de poliésteres con nanofibras de carbono y con nanofibras de carbono carboxiladas: dispersión, interacciones, morfología y propiedades
2010
[367] СТРУКТУРНЫЕ ОСОБЕННОСТИ И СВОЙСТВА ПОЛИМЕРНЫХ НАНОКОМПОЗИТОВ ПРИ НИЗКИХ КОНЦЕНТРАЦИЯХ НАПОЛНИТЕЛЯ
2010
[368] The Incorporation of Nanomaterials into Polymer Media
Polymer Nanocomposites Handbook, 2009
[369] Highly sensitive nanomaterial based electrochemical biosensor
ProQuest Dissertations Publishing, 2009
[370] Preparation, characterization, and properties of polyamide 66/Maleic anhydride-grafted-polypropylene/clay ternary nanocomposites
2009
[371] Електро-та теплофізичні властивості системи поліпропілен–вуглецеві нанотрубки
2009
[372] The incorporation of nanomaterials into polymer media
2009
[373] Cobalt-containing nanocomposites based on zeolites of MFI framework type
Journal of Magnetism and Magnetic Materials, 2009
[374] 碳纳米管表面修饰改性, 机理研究现状及展望
材料保护, 2009
[375] 添加剂及电源波形对镍钴合金电铸液分散能力的影响
材料保护, 2009
[376] Synthesis, microstructure and electrical conductivity of carbon nanotube–alumina nanocomposites
Ceramics International, 2009
[377] Wedge test of carbon‐nanotube‐reinforced epoxy adhesive joints
Journal of Applied Polymer Science, 2009
[378] Nanotubes as polymers
Polymer, 2009
[379] Tribological Characteristics of Carbon Nanotube Thermoplastic Resin Composites
ASME/STLE 2009 International Joint Tribology Conference. American Society of Mechanical Engineers, 2009
[380] TOWARDS Q-PCR OF Escherichia coli WITH IMPROVED ELECTROCHEMICAL DETECTION ANABEL LERMOa, SUSANA CAMPOYb, JORDI BARBéb, SALVADOR ALEGRETa, and MARIA
Chem. Listy, 2008
[381] Electrical conducting behavior of hybrid nanocomposites containing polyaniline, carbon nanotube, and carbon black
Smart Materials, Nano-and Micro-Smart Systems. International Society for Optics and Photonics, 2008
[382] PREPARING NANOCOMPOSITES VIA MELT PROCESSING: CURRENT DIFFICULTIES AND PERSPECTIVES
2008
[383] Applications in Biology and Medicine
Carbon Nanotubes: Angels Or Demons?, 2008
[384] Carbon Nanotubes: Synthesis and Characterization
Nanopackaging, 2008
[385] A review on carbon epoxy nanocomposites
Journal of Reinforced Plastics and Composites, 2008
[386] Thermal properties of CNT-Alumina nanocomposites
Composites Science and Technology, 2008
[387] Rheological and mechanical characterization of multi-walled carbon nanotubes/polypropylene nanocomposites
Journal of Macromolecular Science, 2008
[388] Mixtures of colloidal rods and spheres in bulk and in confinement
2008
[389] Electrochemical properties of heat-treated multi-walled carbon nanotubes
Applied Science and Convergence Technology, 2008
[390] [비핵ㆍ개방ㆍ 3000 과 남북경협 4 원칙] 비핵화 이전 경협 추진 '북핵연계론'걸림돌 넘나
민족 21, 2008
[391] Carbon-Nanotube Growth over Iron Nanoparticles Formed on CaCO~ 3 Support by Using Hydrogen Reduction
2008
[392] The impact of nanotechnology on polyesters, polyamides and other textiles
2008
[393] have such an effect at the nano-scale. For producing CNT-alumina compos-ites various approaches have been proposed, 15, 86,140 but little data is …
2008
[394] TENDENCIAS EN NANOMANUFACTURA. CAD/CAM, TéCNICAS DE MANUFACTURA Y COMPORTAMIENTO MECANICO DE COMPUESTOS NANOESTRUCTURADOS
INGENIERíA MECáNICA, TECNOLOGíA Y DESARROLLO, 2007
[395] Tendencias en nanomanufactura. CAD/CAM, Tecnicas de Manufactura y Comportamiento Mecanico de Compuestos Nanoestructurados
INGENIERíA MECáNICA, TECNOLOGíA Y DESARROLLO, 2007
[396] Modeling & processing of ceramic and polymer precursor ceramic matrix composite materials
2007
[397] Thin-film synthesis and microstructure characterization of the poly (vinyl alcohol) matrix with functionalized carbon nanotubes
Journal of materials research , 2007
[398] Meshless method for nonlinear heat conduction analysis of nano-composites
Heat and mass transfer, 2007
[399] Micromechanics modeling of the multifunctional nature of carbon nanotube-polymer nanocomposites
2007
[400] Carbon nanotube composite coated platinum electrode for detection of Cr (III) in real samples
Talanta, 2007
[401] Effect of interface on the thermal conductivity of carbon nanotube composites
International journal of thermal sciences, 2007
[402] Morphological features and melting behavior of nanocomposites based on isotactic polypropylene and multiwalled carbon nanotubes
Journal of applied polymer science, 2007
[403] Temperature dependence of electrical conductivity in double-wall and multi-wall carbon nanotube/polyester nanocomposites
Journal of Materials Science, 2007
[404] Thermal analysis of CNT-based nano-composites by element free Galerkin method
Computational Mechanics, 2007
[405] Carbon nanotube reinforced polymer composites—a state of the art
Bulletin of Materials Science, 2007
[406] Nanosurfaces and nanostructures for artificial orthopedic implants
2007
[407] Carbon Nanotube Patterning with Capillary Micromolding of Catalyst
Journal of nanoscience and nanotechnology, 2007
[408] Chapter 21. Textile Nanotechnologies
Handbook of Nanoscience, Engineering, and Technology, Second Edition, 2007
[409] Re-agglomeration of carbon nanotubes in two-part epoxy system; influence of the concentration
2007
[410] 碳纳米管及碳纳米管纤维的性能与应用
材料导报, 2007
[411] The production of single-walled carbon nanotubes by a CVD method and their characterisation by various techniques
2007
[412] Mechanical and Electrical Properties of Carbon Nanotube Reinforced Polycarbonate at Liquid Nitrogen Temperature
2007
[413] Influence of nanomodification on physical properties of polymer nanocomposites
2006
[414] Hydrogen storage by carbon materials
Journal of Power Sources, 2006
[415] Doping of photonic crystal fibers with fluorescent probes: possible functional materials for optrode sensors
Journal of Materials Chemistry, 2006
[416] Effect of nanotube thickness on the equivalent thermal conductivity of nano-composites
Transaction of JASCOME, 2006
[417] Nghiên cứu chế tạo vật liệu ống Nanô Cácbon trên đế thép không gỉ
2005
[418] Flame synthesis of carbon nanotubes
2005
[419] Development of ex-situ Aluminium metal matrix composites with re-inforcement of Iron Oxide and multi-wall Carbon nanotubes