Design of Curvature Radius of Finishing Roll for Crimp JCO Formed Welded Pipe - Open Access Library Journal

OALibJ > Vol.6 No.9, September 2019

Design of Curvature Radius of Finishing Roll for Crimp JCO Formed Welded Pipe ()

HTML XML

Download as PDF (Size: 404KB) PP. 1-7

DOI: 10.4236/oalib.1105759 350 Downloads 1,040 Views

Author(s)

Qingcai Liu, Xuechun Wan

Affiliation(s)

School of Mechanical and Electrical Engineering, Guangzhou Railway Polytechnic, Guangzhou, China.

ABSTRACT

JCO means that the cross-section of steel pipe forms geometric shapes such as J, C and O in turn. The steel pipe blank directly formed by crimp JCO process has flat area along the edge of the pipe blank seam, which affects the quality of final pipe product. It is necessary to eliminate the flat area along the pipe seam by finishing process. In order to meet requirements of finishing process, it is necessary to optimize the roll surface curvature radius of finishing roll. Aiming at the design requirement of finishing roll for straight seam welded pipe forming, the optimum calculation method and result of roll surface curvature radius of finishing roll were obtained by using the theoretical analysis of metal sheet plastic forming. The result was successfully used in actual production.

KEYWORDS

LSAW Pipe, Edge Finishing Roller, Curvature Radius, Optimal Design, JCO Forming

Share and Cite:

Liu, Q. and Wan, X. (2019) Design of Curvature Radius of Finishing Roll for Crimp JCO Formed Welded Pipe. Open Access Library Journal, 6, 1-7. doi: 10.4236/oalib.1105759.

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journals Menu

Home

About SCIRP

Service

Policies