Author(s)

Md. Ghulam Zakir, M. A. Rashid Sarkar, Altab Hossain

Nuclear Science and Engineering (NSE) Department, Military Institute of Science and Technology (MIST), Dhaka, Bangladesh.

This paper presents a comparative analysis of different parameters such as enthalpy, moderator temperature, moderator density, flow velocity, pressure, and fuel temperature profile at the fuel pin cell level of PWR. Moreover, in this paper pitches to fuel pin radius ratio are varied from 2.3 to 4. The methods and implementation strategy are such that the coupled neutronic and thermal-hydraulic analysis is executed in a fully one dimensional (1D) manner. The thermal hydraulic is based on moderator/coolant mass and enthalpy equation together with one group diffusion equation for fuel pin. Modelling of fuel pin cell and subchannel is executed in two steps. First, the governing equations are derived assuming that all the parameters appearing in the equations are temperature independent. Fuel pin centerline temperature and radially averaged temperature equations are derived from Fourier laws of thermal conductivity. Finally, diffusion coefficient, fission cross-section and absorbing cross-section are evaluated with respect to the fuel pin temperature. The outcome will be helpful for further neutronics and thermal analysis of PWR. Thermal hydraulics parameter varies the maximum 30 percentage from the lowermost value.

Fuel Pin, Pitch, Sub-Channel, Neutronics and Thermal Hydraulics

Zakir, M. , Sarkar, M. and Hossain, A. (2019) Analysis of Neutronics and Thermal-Hydraulic Behavior in a Fuel Pin of Pressurized Water Reactor (PWR). World Journal of Nuclear Science and Technology, 9, 74-83. doi: 10.4236/wjnst.2019.92005.