Author(s)

Raj Senani^1*, Data Ram Bhaskar^2,3, Munish Prasad Tripathi⁴, Manoj Kumar Jain⁵

¹Division of Electronics and Communication Engineering, Netaji Subhas Institute of Technology, New Delhi, India.
²Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India.
³Department of Electrical Engineering, Delhi Technological University, New Delhi, India.
⁴Department of Electronics and Communication Engineering, National Institute of Technology, Ashok Rajpath, Bihar, India.
⁵Department of Electronics Engineering, Institute of Engineering and Technology, Lucknow, India.

New voltage-controlled floating inductors employing CFOAs and an analog multiplier have been presented which have the attractive features of using a canonic number of passive components (only two resistors and a capacitor) and not requiring any component-matching conditions and design constraints for the intended type of inductance realization. The workability and applications of the new circuits have been demonstrated by SPICE simulation and hardware experimental results based upon AD844-type CFOAs and AD633-type/MPY534 type analog multipliers.

Voltage Controlled Inductors, Floating Inductors, Inductance Simulation, Current Feedback Op-Amps, Analog Multipliers, Analog Circuits

Senani, R., Bhaskar, D.R., Tripathi, M.P. and Jain, M.K. (2016) Canonic Realizations of Voltage-Controlled Floating Inductors Using CFOAs and Analog Multipliers. Circuits and Systems, 7, 3617-3625. doi: 10.4236/cs.2016.711306.