Author(s)

Mona A. Abdel-Fatah^1*, Ayman El-Gendi¹, Fatma Ashour²

¹Department of Chemical Engineering & Pilot Plant, National Research Center, Giza, Egypt.
²Department of Chemical Engineering, Faculty of Engineering, Cairo University, Giza, Egypt.

The aim of this paper is to design a water desalination plant using Reverse Osmosis membrane to treat salt water to be usable for drinkable, domestic, industrial or agricultural uses. RO unit is designed to conservative standards for versatility in the event of feed water quality variations. The design includes a feed water flush cycle to minimize membrane fouling and piping corrosion during shutdown. The system will be all appropriate controls and instrumentation for automatic operation. All system components are available and of heavy duty industrial design and fabricated with the highest quality workmanship. Quality control will be maintained throughout all manufacturing processes. The system will produce permeate water minimum of 3600 m³/day with a quality of approximately 100 ppm total dissolved solids (TDS) when operating on well feed water with a 10,000 ppm TDS and a temperature of 25 - 30 degrees C. The design permeate recovery is 50%; and energy recovery device which saves $30,556.28/year.

Desalination, Brackish Water, RO Design Unit, Energy Recovery Systems

Abdel-Fatah, M. , El-Gendi, A. and Ashour, F. (2016) Performance Evaluation and Design of RO Desalination Plant: Case Study. Journal of Geoscience and Environment Protection, 4, 53-63. doi: 10.4236/gep.2016.42007.