Share This Article:

Performance of Heat Pipe Utilized for Atmospheric Air Heating

Full-Text HTML XML Download Download as PDF (Size:274KB) PP. 1015-1021
DOI: 10.4236/jamp.2015.38125    4,842 Downloads   5,235 Views
Author(s)

ABSTRACT

The objective of the present experimental work is to investigate the performance of a wrapped screen heat pipe for atmospheric air heating to compare with the limits of this pipe. The experiment was conducted using copper pipe material and acetone as working fluid at different vapor temperatures. The testing also consists of a heater, a blower for heat removal (condenser), temperature measuring device, a vapor temperature probe, acetone charging system, and a vacuum pump. The copper outside diameterof the pipe is 0.022 m, with a total length of 0.6 m. The results showed that the pipe wall temperature (Tw) for a wrapped screen heat pipe has a rapid increase and takes 50 min to reach steady state at (Q = 63 W). The vapour temperature of working fluid increases as the heat load increases at constant air velocity. It was also been found that the range of vapour temperature deceases as the filling ratio increases that means the increasing of the filling ratio results the decrease of the maximum vapour temperature and the variation in the vapour temperature. The best recorded filling ratio is 0.6 which has the lowest vapour temperature at highest heat load. The maximum heat transport limit for this pipe is 80 W and the maximum temperature difference for air is 5C.

 

Cite this paper

Mansur, M. (2015) Performance of Heat Pipe Utilized for Atmospheric Air Heating. Journal of Applied Mathematics and Physics, 3, 1015-1021. doi: 10.4236/jamp.2015.38125.

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.