Author(s)

Khalid M. Abed^1*, Badoor M. Kurji², Basma A. Abdul-Majeed¹

¹Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq.
²Chemical Engineering Department, College of Engineering, University of Anbar, Ramadi, Iraq.

This work was conducted to study the extraction of eucalyptus oil from natural plants (Eucalyptus camadulensis leaves) by organic solvents. the effects of the main operating parameters were studied; type of solvent (n-hexane and ethanol), time to reach equilibrium, the temperature (45°C to 65°C) for n-hexane and (45°C to 75°C) for ethanol, solvent to solid ratio (5:1 to 8:1 (v/w)), agitation speed (0 to 900 rpm) and the particle size (0.5 to 2.5 cm) of fresh leaves to find the best processing conditions for the achieving maximum oil yield. The concentration of eucalyptus oil in solvent was measured by using UV-spectrophotometer. The results (for n-hexane) showed that the agitation speed of 900 rpm, temperature 65°C with solvent to solid ratio 7:1 (v/w) of particle size 0.5 cm for 210 minute give the highest value of oil (68.5 wt%). Similar conditions for ethanol with the exception of the temperature (75°C) give the highest yield of oil (65.07 wt%).

Extraction, Eucalyptus Oil, Modeling

Abed, K. , Kurji, B. and Abdul-Majeed, B. (2015) Extraction and Modelling of Oil from Eucalyptus camadulensis by Organic Solvent. Journal of Materials Science and Chemical Engineering, 3, 35-42. doi: 10.4236/msce.2015.38006.