Author(s)

A. I. Opaluwa¹, A. Oyetunji², S. O. Seidu²

¹Department of Foundry Engineering, Federal Polytechnic, Idah, Nigeria.
²Department of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria.

This work was carried out with the aim of using alloying and ageing processes to develop new alloys from grey cast iron that will have optimum properties suitable for the manufacturing of machine cutting tools. Four different alloys of grey cast iron with alloying composition of Fe-3% Al-2.5% Cr-2% Mo; Fe-3% Al-2% Cr-2% Mo; Fe-3% Al-2.5% Cr-1.5% Mo and Fe-3% Al-1.5% Cr-2% Mo were produced. The chemical analysis of both as-received base metal and produced alloys was determined using Spetro-CJRO Arc-Spectrometer. The microstructural properties and mechanical properties (hardness, impact toughness and ultimate tensile strength) of the produced alloys were determined for both as-cast samples and aged samples. The results showed that the addition of these alloying elements slightly decreased carbon, silicon and phosphorus content and thereby changed the hypereutectic cast iron to hypoeutectic by reducing the carbon equivalent. Also the morphology of graphite flake was changed as a result of the formation of nitrides and carbides of different phases. The results of the mechanical properties showed that the maximum hardness values obtained for each of the four alloys produced and aged at 300?C are 71.5 HRc, 69 HRc, 66.5 HRc and 65.4 HRc respectively. The maximum values for impact toughness obtained for each of the same produced alloys are 66 J, 63.6 J, 62 J and 60.3 J respectively. Also the maximum ultimate tensile strength values obtained for each of the alloys are 1380 N·mm^-2, 1311 N·mm^-2, 1260 N·mm^-2 and 1190 N·mm^-2. Comparing the properties obtained from the produced alloys with those of the commercial cutting tools, it was found that cutting tools manufactured from these produced alloys can compete favourably with cast cobalt tool, high speed steel (HSS) and tool steel.

Grey Cast Iron, Alloying Elements, Ageing, Cutting Tools, Microstructures

Opaluwa, A. , Oyetunji, A. and Seidu, S. (2015) Age Strengthening of Grey Cast Iron Alloys for Machine Cutting Tools Production. Journal of Minerals and Materials Characterization and Engineering, 3, 107-117. doi: 10.4236/jmmce.2015.33013.