Author(s)

Chieko Narita¹, Yutaro Shimode², Kazushi Yamada¹

¹Department of Advanced Fibro-Science, Kyoto Institute of Technology, Kyoto, Japan.
²Future Applied Conventional Technology Center, Kyoto Institute of Technology, Kyoto, Japan.

Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. In 2014, there exist only two companies that manufacture silver powder for the purpose of Maki-e, and this study focuses on comparing the powders manufactured by them. Gloss and color of each silver powder were measured after Maki-e decoration was finished, and EDS (energy-dispersive X-ray spectroscopy) was used to determine the differences in their chemical composition. In addition, to verify the effect of polishing, residual gloss after sulfuration and polishing was measured. The study revealed that the shapes of the silver powders (Maru-fun, No. 1) manufactured by the two companies are different and it affects the occupancy rate of Urushi and powder, which in turn affects their gloss and color. Wakou silver has a very strong resistance to sulfuration; however, owing to its Pd content, its chroma is much lower than that of other powders. It was shown that sulfuration on powder surface can be removed by polishing irrespective of the shape and chemical composition ratio of the particles.

Urushi, Natural Lacquer, Maki-e, Silver Powder, Energy-Dispersive X-Ray Spectroscopy

Narita, C. , Shimode, Y. and Yamada, K. (2015) Study on Properties of Silver Powder for Maki-e. Materials Sciences and Applications, 6, 1-8. doi: 10.4236/msa.2015.61001.