Author(s)

Constantinos VOTIS, Vasilis CHRISTOFILAKIS, Panos KOSTARAKIS

.

Detail experimental measurements of a 2.4 GHz printed dipole antenna for wireless communication systems is presented and discussed. A group of printed dipoles with integrated balun have been designed and constructed on a dielectric substrate. This paper is based on modifications of the known printed dipole architecture. The corresponding printed dipole antennas have differences on their forms that are provided by two essential geometry parameters. The first parameter l is related to the bend on microstrip line that feeds the dipole and the second w corresponds to the form of the dipole’s gap. The impact of these parameters on reflection coefficient and radiation pattern of antenna has been investigated. The corresponding measured results indicate that the return loss and radiation pattern of a printed dipole antenna are independent of the w parameter. Instead, variations in the value of the l parameter in the dipole’s structure affect the form of the corresponding return loss. These observations are very important and provide interesting considerations on affecting design and construction of antenna elements at frequency range of 2.4 GHz.

Printed Dipole, Scattering Parameters, Radiation Pattern

C. VOTIS, V. CHRISTOFILAKIS and P. KOSTARAKIS, "Geometry Aspects and Experimental Results of a Printed Dipole Antenna," International Journal of Communications, Network and System Sciences, Vol. 3 No. 2, 2010, pp. 204-207. doi: 10.4236/ijcns.2010.32029.