Top Cited Articles
(1068 articles with 17771 citations as of July 2022)

• Solar Cells: In Research and Applications—A Review, Materials Sciences and Applications, Vol.6 No.12, 2015
• Shruti Sharma, Kamlesh Kumar Jain, Ashutosh Sharma
• Citations: 497 (Details)

• Optical and Structural Properties of ZnO Thin Films Fabricated by Sol-Gel Method, Materials Sciences and Applications, Vol.2 No.5, 2011
• Ziaul Raza Khan, Mohd Shoeb Khan, Mohammad Zulfequar, Mohd Shahid Khan
• Citations: 365 (Details)

• A Review of the Production Cycle of Titanium Dioxide Pigment, Materials Sciences and Applications, Vol.5 No.7, 2014
• Manuel Jesús Gázquez, Juan Pedro Bolívar, Rafael Garcia-Tenorio, Federico Vaca
• Citations: 324 (Details)

• Infrared Spectroscopy of Titania Sol-Gel Coatings on 316L Stainless Steel, Materials Sciences and Applications, Vol.2 No.10, 2011
• Daniela Cordeiro Leite Vasconcelos, Vilma Conceição Costa, Eduardo Henrique Martins Nunes, Antônio Claret Soares Sabioni, Massimo Gasparon, Wander Luiz Vasconcelos
• Citations: 199 (Details)

• Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material, Materials Sciences and Applications, Vol.2 No.12, 2011
• Mahmoud M. Nemat-Alla, Moataz H. Ata, Mohamed R. Bayoumi, Wael Khair-Eldeen
• Citations: 173 (Details)

• Emerging Trends in Automotive Lightweighting through Novel Composite Materials, Materials Sciences and Applications, Vol.7 No.1, 2016
• Muhammad Pervaiz, Suhara Panthapulakkal, Birat KC, Mohini Sain, Jimi Tjong
• Citations: 171 (Details)

• Conducting Polyaniline-Electrical Charge Transportation, Materials Sciences and Applications, Vol.4 No.1, 2013
• Veluru J. Babu, Sesha Vempati, Seeram Ramakrishna
• Citations: 168 (Details)

• Biopolymer Films and Coatings in Packaging Applications—A Review of Recent Developments, Materials Sciences and Applications, Vol.5 No.10, 2014
• Jari Vartiainen, Mika Vähä-Nissi, Ali Harlin
• Citations: 153 (Details)

• Characteristic and Performance of Elementary Hemp Fibre, Materials Sciences and Applications, Vol.1 No.6, 2010
• Dasong Dai, Mizi Fan
• Citations: 146 (Details)

• Effect of Solution Concentration on the Electrospray/Electrospinning Transition and on the Crystalline Phase of PVDF, Materials Sciences and Applications, Vol.1 No.4, 2010
• Lígia Maria Manzine Costa, Rosário Elida Suman Bretas, Rinaldo Gregorio
• Citations: 144 (Details)

• Chemical Analyses of Palm Kernel Oil-Based Polyurethane Prepolymer, Materials Sciences and Applications, Vol.3 No.2, 2012
• Chee Sien Wong, Khairiah Haji Badri
• Citations: 135 (Details)

• The Effects of Filler Contents and Particle Sizes on the Mechanical and End-Use Properties of Snail Shell Powder Filled Polypropylene, Materials Sciences and Applications, Vol.2 No.7, 2011
• Genevive C. Onuegbu, Isaac O. Igwe
• Citations: 126 (Details)

• Design with Ultra Strong Polyethylene Fibers, Materials Sciences and Applications, Vol.2 No.5, 2011
• Roelof Marissen
• Citations: 124 (Details)

• Band Gap Determination from Diffuse Reflectance Measurements of Irradiated Lead Borate Glass System Doped with TiO₂ by Using Diffuse Reflectance Technique, Materials Sciences and Applications, Vol.4 No.5, 2013
• Saif Ebraheem, Antar El-Saied
• Citations: 123 (Details)

• Structural and Optical Properties of Li⁺: PVP & Ag⁺: PVP Polymer Films, Materials Sciences and Applications, Vol.2 No.11, 2011
• Kothapalle Sivaiah, Koramala Naveen Kumar, V. Naresh, Srinivasa Buddhudu
• Citations: 119 (Details)

• Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer, Materials Sciences and Applications, Vol.9 No.1, 2018
• Mohammad S. Alsoufi, Abdulrhman E. Elsayed
• Citations: 115 (Details)

• Some Mechanical and Thermal Properties of PC/ABS Blends, Materials Sciences and Applications, Vol.2 No.5, 2011
• Rachida Krache, Ismahane Debah
• Citations: 109 (Details)

• Synthesis, Structural and Dielectric Studies of Nickel Substituted Cobalt-Zinc Ferrite, Materials Sciences and Applications, Vol.1 No.1, 2010
• Gangatharan Sathishkumar, Chidambaram Venkataraju, Kandasamy Sivakumar
• Citations: 108 (Details)

• Effect of Calcinations Temperature on Crystallography and Nanoparticles in ZnO Disk, Materials Sciences and Applications, Vol.2 No.9, 2011
• Urai Seetawan, Suwit Jugsujinda, Tosawat Seetawan, Ackradate Ratchasin, Chanipat Euvananont, Chabaipon Junin, Chanchana Thanachayanont, Prasarn Chainaronk
• Citations: 108 (Details)

• Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V, Materials Sciences and Applications, Vol.3 No.5, 2012
• Karina Puebla, Lawrence E. Murr, Sara M. Gaytan, Edwin Martinez, Francisco Medina, Ryan B. Wicker
• Citations: 104 (Details)

• Synthesis, Structural and Magnetic Properties of Copper Substituted Nickel Ferrites by Sol-Gel Method, Materials Sciences and Applications, Vol.3 No.2, 2012
• Gopathi Ravi Kumar, Katrapally Vijaya Kumar, Yarram Chetty Venudhar
• Citations: 99 (Details)

• Foundry Coating Technology: A Review, Materials Sciences and Applications, Vol.2 No.8, 2011
• U. C Nwaogu, N. S Tiedje
• Citations: 98 (Details)

• Co-Precipitation Synthesis and Characterization of Nanocrystalline Zinc Oxide Particles Doped with Cu²⁺ Ions, Materials Sciences and Applications, Vol.3 No.8, 2012
• Mergoramadhayenty Mukhtar, Lusitra Munisa, Rosari Saleh
• Citations: 96 (Details)

• Rheological Properties of Polymers: Structure and Morphology of Molten Polymer Blends, Materials Sciences and Applications, Vol.2 No.1, 2011
• Oluranti Sadiku-Agboola, Emmauel Rotimi Sadiku, Adesola Taoreed Adegbola, Olusesan Frank Biotidara
• Citations: 95 (Details)

• Present Status of the Development and Application of Transparent Conductors Oxide Thin Solid Films, Materials Sciences and Applications, Vol.2 No.9, 2011
• Luis Castañeda
• Citations: 92 (Details)

• Characteristics and Photocatalytics Activities of Ce-Doped ZnO Nanoparticles, Materials Sciences and Applications, Vol.4 No.2, 2013
• Nadia Febiana Djaja, Rosari Saleh
• Citations: 89 (Details)

• Structural and Conductivity Studies of Poly(Ethylene Oxide) – Silver Triflate Polymer Electrolyte System, Materials Sciences and Applications, Vol.2 No.11, 2011
• Nirali Gondaliya, Dinesh Kumar Kanchan, Poonam Sharma, Prajakata Joge
• Citations: 83 (Details)

• Interpenetrated Chitosan-Poly(Acrylic Acid-Co-Acrylamide) Hydrogels. Synthesis, Characterization and Sustained Protein Release Studies, Materials Sciences and Applications, Vol.2 No.6, 2011
• Michel Bocourt Povea, Waldo Argüelles Monal, Juan Valerio Cauich-Rodríguez, Alejando May Pat, Nancy Badas Rivero, Carlos Peniche Covas
• Citations: 83 (Details)

• Densification of Thin Aluminum Oxide Films by Thermal Treatments, Materials Sciences and Applications, Vol.5 No.8, 2014
• V. Cimalla, M. Baeumler, L. Kirste, M. Prescher, B. Christian, T. Passow, F. Benkhelifa, F. Bernhardt, G. Eichapfel, M. Himmerlich, S. Krischok, J. Pezoldt
• Citations: 83 (Details)

• Sol-Gel Preparation of Nanoscale TiO₂/SiO₂ Composite for Eliminating of Con Red Azo Dye, Materials Sciences and Applications, Vol.2 No.5, 2011
• Abdolreza Nilchi, Simin Janitabar-Darzi, Somayeh Rasouli-Garmarodi
• Citations: 79 (Details)

• Mechanical, Thermal and Interfacial Properties of Jute Fabric-Reinforced Polypropylene Composites: Effect of Potassium Dichromate, Materials Sciences and Applications, Vol.1 No.6, 2010
• Jahangir A. Khan, Mubarak A. Khan, Rabiul Islam, Abdul Gafur
• Citations: 78 (Details)

• The Use of Cellulose Nanofillers in Obtaining Polymer Nanocomposites: Properties, Processing, and Applications, Materials Sciences and Applications, Vol.7 No.5, 2016
• Fernanda Abbate dos Santos, Gisele C. V. Iulianelli, Maria Inês Bruno Tavares
• Citations: 78 (Details)

• Characterization of Dispersive Soils, Materials Sciences and Applications, Vol.2 No.6, 2011
• T. S. Umesh, S. V. Dinesh, Puvvadi V. Sivapullaiah
• Citations: 77 (Details)

• Photoelectric Characterization of Dye Sensitized Solar Cells Using Natural Dye from Pawpaw Leaf and Flame Tree Flower as Sensitizers, Materials Sciences and Applications, Vol.3 No.5, 2012
• Mohammed Isah Kimpa, Musa Momoh, Kasim Uthman Isah, Hassan Nawawi Yahya, Muhammed Muhammed Ndamitso
• Citations: 72 (Details)

• Ultrafast Nonlinear Optical and Optical Limiting Properties of Phthalocyanine Thin Films Studied Using Z-Scan, Materials Sciences and Applications, Vol.2 No.5, 2011
• Soma Venugopal Rao, Puliparambil Thilakan Anusha, Turaga Shuvan Prashant, Debasis Swain, Surya P. Tewari
• Citations: 71 (Details)

• Conversion of Carbon Dioxide to Methanol Using Solar Energy - A Brief Review, Materials Sciences and Applications, Vol.2 No.10, 2011
• Ibram Ganesh
• Citations: 69 (Details)

• Processing and Material Characteristics of a reclaimed Ground Rubber Tire Reinforced Styrene Butadiene Rubber, Materials Sciences and Applications, Vol.2 No.5, 2011
• Debapriya De, Debasish De
• Citations: 68 (Details)

• A Comparison of Bending Properties for Cellular Core Sandwich Panels, Materials Sciences and Applications, Vol.4 No.8, 2013
• Li Yang, Ola Harrysson, Harvey West, Denis Cormier
• Citations: 67 (Details)

• Preparation and Optical Properties Assessment of CdSe Quantum Dots, Materials Sciences and Applications, Vol.4 No.2, 2013
• Gholam Reza Amiri, Soheil Fatahian, Somayeh Mahmoudi
• Citations: 65 (Details)

• Experimental Investigation of Natural Fiber Reinforced Polymers, Materials Sciences and Applications, Vol.3 No.2, 2012
• Irene S. Fahim, Salah M. Elhaggar, Hatem Elayat
• Citations: 65 (Details)

• Dispersibility, Shape and Magnetic Properties of Nano-Fe₃O₄ Particles, Materials Sciences and Applications, Vol.2 No.11, 2011
• Xiaojuan Liang, Haowei Shi, Xiangchen Jia, Yuxiang Yang, Xiangnong Liu
• Citations: 63 (Details)

• Design and Implementation Challenges of Microelectrode Arrays: A Review, Materials Sciences and Applications, Vol.4 No.8, 2013
• Bahareh Ghane-Motlagh, Mohamad Sawan
• Citations: 63 (Details)

• Tailoring Properties of Biocompatible PEG-DMA Hydrogels with UV Light, Materials Sciences and Applications, Vol.3 No.6, 2012
• Sania Bäckström, Juana Benavente, Rolf W. Berg, Karin Stibius, Marianne S. Larsen, Henrik Bohr, Claus Hélix-Nielsen
• Citations: 62 (Details)

• Study of the Bulk Magnetic and Electrical Properties of MgFe₂O₄ Synthesized by Chemical Method, Materials Sciences and Applications, Vol.2 No.11, 2011
• Sheikh Manjura Hoque, M. Abdul Hakim, Al Mamun, Shireen Akhter, Md. Tanvir Hasan, Deba Prasad Paul, Kamanio Chattopadhayay
• Citations: 62 (Details)

• Synthesis of Crystalline Ag Nanoparticles (AgNPs) from Microorganisms, Materials Sciences and Applications, Vol.1 No.1, 2010
• Seema Sharma, Naheed Ahmad, Anuradha Prakash, Vidya Nand Singh, Ashok Kumar Ghosh, Bodh Raj Mehta
• Citations: 62 (Details)

• Polypyrrole Coated PET Fabrics for Thermal Applications, Materials Sciences and Applications, Vol.1 No.4, 2010
• Amelia Carolina Sparavigna, Luca Florio, Jamshid Avloni, Arthur Henn
• Citations: 62 (Details)

• Fine Scale Precipitates in Al-Mg-Zn Alloys after Various Aging Temperatures, Materials Sciences and Applications, Vol.2 No.5, 2011
• Nasser Afify, Abdel-Fattah Gaber, Ghada Abbady
• Citations: 61 (Details)

• Effect of Laser Beam Welding Parameters on Microstructure and Properties of Duplex Stainless Steel, Materials Sciences and Applications, Vol.2 No.10, 2011
• Abdel-Monem El-Batahgy, Abdel-Fattah Khourshid, Thoria Sharef
• Citations: 61 (Details)

• Optimizing the Preparation Conditions of Bi-2223 Superconducting Phase Using PbO and PbO₂, Materials Sciences and Applications, Vol.3 No.4, 2012
• N. H. Mohammed, Ramadan Awad, A. I. Abou-Aly, I. H. Ibrahim, M. S. Hassan
• Citations: 61 (Details)

• Coronary Stents Fracture: An Engineering Approach (Review), Materials Sciences and Applications, Vol.4 No.10, 2013
• Bandar AL-Mangour, Rosaire Mongrain, Stephen Yue
• Citations: 59 (Details)

• Preparation and Characterization of Poly(divinylbenzene) Microcapsules Containing Octadecane, Materials Sciences and Applications, Vol.2 No.8, 2011
• Preeyaporn Chaiyasat, Amorn Chaiyasat, Waraporn Boontung, Supaporn Promdsorn, Sutanya Thipsit
• Citations: 59 (Details)

• 3D Printed Scaffolds as a New Perspective for Bone Tissue Regeneration: Literature Review, Materials Sciences and Applications, Vol.7 No.8, 2016
• Raquel Couto de Azevedo Gonçalves Mota, Emerson Oliveira da Silva, Felipe Fortes de Lima, Lívia Rodrigues de Menezes, Antonio Carlos Santos Thiele
• Citations: 58 (Details)

• Structural, Optical and Room Temperature Magnetic Study of Mn₂O₃ Nanoparticles, Materials Sciences and Applications, Vol.6 No.10, 2015
• Majed Sharrouf, Ramadan Awad, Mohamad Roumié, Salem Marhaba
• Citations: 58 (Details)

• Preparation of Copper (Cu) and Copper Oxide (Cu₂O) Nanoparticles under Supercritical Conditions, Materials Sciences and Applications, Vol.2 No.8, 2011
• M. Asharf Shah, M. S. Al-Ghamdi
• Citations: 57 (Details)

• Synthesis of Polypyrrole Using Ammonium Peroxy Disulfate (APS) as Oxidant Together with Some Dopants for Use in Gas Sensors, Materials Sciences and Applications, Vol.2 No.10, 2011
• Hemant K. Chitte, Narendra V. Bhat, Mr. Ajit V. Gore, Ganesh N. Shind
• Citations: 57 (Details)

• Potential Energy Curves & Material Properties, Materials Sciences and Applications, Vol.2 No.2, 2011
• Devarakonda Annapurna Padmavathi
• Citations: 57 (Details)

• Structural and Dielectric Properties of Sintering Zinc Oxide Bulk Ceramic, Materials Sciences and Applications, Vol.2 No.7, 2011
• Mariem Chaari, Adel Matoussi, Zouheir Fakhfakh
• Citations: 56 (Details)

• Physical and Morphological Structure of Chicken Feathers (Keratin Biofiber) in Natural, Chemically and Thermally Modified Forms, Materials Sciences and Applications, Vol.3 No.12, 2012
• Débora D. Belarmino, Rasiah Ladchumananandasivam, Loilde D. Belarmino, Juliana R. de M. Pimentel, Brismark G. da Rocha, Alcione O. Galvão, Sania M. B. de Andrade
• Citations: 56 (Details)

• Solid State Reactions in Cr₂O₃-ZnO Nanoparticles Synthesized by Triethanolamine Chemical Precipitation, Materials Sciences and Applications, Vol.2 No.11, 2011
• Imelda Esparza, Myriam Paredes, Roberto Martinez, Adriana Gaona-Couto, Guadalupe Sanchez-Loredo, Luisa M. Flores-Velez, Octavio Dominguez
• Citations: 55 (Details)

• Heavy Metal Contamination of Surface Soil in Relationship to Land Use Patterns: A Case Study of Benue State, Nigeria, Materials Sciences and Applications, Vol.1 No.3, 2010
• Christopher Iorfa Adamu, Therese Ntonzi Nganje
• Citations: 55 (Details)

• An Investigation on the Electrochemical Characteristics of Ta₂O₅-IrO₂ Anodes for the Application of Electrolysis Process, Materials Sciences and Applications, Vol.2 No.4, 2011
• Joo-Yul Lee, Dae-Keun Kang, KyuHwan Lee, DoYon Chang
• Citations: 55 (Details)

• Plant Seeds-Based Dye-Sensitized Solar Cells, Materials Sciences and Applications, Vol.4 No.9, 2013
• Monzir S. Abdel-Latif, Taher M. El-Agez, Sofyan A. Taya, Amal Y. Batniji, Hatem S. El-Ghamri
• Citations: 54 (Details)

• Determination of Anodized Aluminum Material Characteristics by Means of Nano-Indentation Measurements, Materials Sciences and Applications, Vol.2 No.10, 2011
• Maria Datcheva, Sabina Cherneva, Maria Stoycheva, Roumen Iankov, Dimitar Stoychev
• Citations: 52 (Details)

• Electrochemical and Quantum Chemical Studies of 5-Substituted Tetrazoles as Corrosion Inhibitors for Copper in Aerated 0.5 M H₂SO₄ Solution, Materials Sciences and Applications, Vol.2 No.9, 2011
• Pengju Liu, Xia Fang, Yongming Tang, Chunning Sun, Cheng Yao
• Citations: 52 (Details)

• NiO_x Nanoparticle Synthesis by Chemical Vapor Deposition from Nickel Acetylacetonate, Materials Sciences and Applications, Vol.2 No.4, 2011
• Pavel Moravec, Jiří Smolík, Helmi Keskinen, Jyrki M. Mäkelä, Snejana Bakardjieva, Valeri V. Levdansky
• Citations: 50 (Details)

• Processing-Microstructure Relationships in the Plasma Electrolytic Oxidation (PEO) Coating of a Magnesium Alloy, Materials Sciences and Applications, Vol.5 No.3, 2014
• R. O. Hussein, D. O. Northwood, X. Nie
• Citations: 50 (Details)

• Glutathione-Responsive Carboxymethyl Chitosan Nanoparticles for Controlled Release of Herbicides, Materials Sciences and Applications, Vol.6 No.6, 2015
• Zhiyan Yu, Xin Sun, Haixia Song, Wenqian Wang, Zhao Ye, Liyan Shi, Kaikai Ding
• Citations: 50 (Details)

• Influence of Blend Composition and Compatibilizer on Mechanical and Morphological Properties of Recycled HDPE/PET Blends, Materials Sciences and Applications, Vol.5 No.13, 2014
• Ruey Shan Chen, Mohd Hafizuddin Ab Ghani, Mohd Nazry Salleh, Sahrim Ahmad, Sinyee Gan
• Citations: 49 (Details)

• Study of Mechanical and Physical Properties of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene Composite, Materials Sciences and Applications, Vol.5 No.1, 2014
• Budrun Neher, Md. Mahbubur Rahman Bhuiyan, Humayun Kabir, Md. Rakibul Qadir, Md. Abdul Gafur, Farid Ahmed
• Citations: 49 (Details)

• Nanofiller Dispersion in Polymer Dielectrics, Materials Sciences and Applications, Vol.4 No.4A, 2013
• Daniel Tan, Yang Cao, Enis Tuncer, Patricia Irwin
• Citations: 49 (Details)

• Swelling Properties of New Hydrogels Based on the Dimethyl Amino Ethyl Acrylate Methyl Chloride Quaternary Salt with Acrylic Acid and 2-Methylene Butane-1,4-Dioic Acid Monomers in Aqueous Solutions, Materials Sciences and Applications, Vol.1 No.3, 2010
• Issa Katime, Eduardo Mendizábal
• Citations: 49 (Details)

• Experimental Investigation on the Effect of Reinforcement Particles on the Forgeability and the Mechanical Properties of Aluminum Metal Matrix Composites, Materials Sciences and Applications, Vol.1 No.5, 2010
• S. Das, R. Behera, A. Datta, G. Majumdar, B. Oraon, G. Sutradhar
• Citations: 49 (Details)

• Optical Properties of Polycrystalline Zinc Selenide Thin Films, Materials Sciences and Applications, Vol.3 No.1, 2012
• Umesh Khairnar, Sulakshana Behere, Panjabrao Pawar
• Citations: 48 (Details)

• Effect of Ethylene Carbonate (EC) Plasticizer on Poly (Vinyl Chloride)-Liquid 50% Epoxidised Natural Rubber (LENR50) Based Polymer Electrolyte, Materials Sciences and Applications, Vol.2 No.7, 2011
• M. Y. A. Rahman, A. Ahmad, T. K. Lee, Y. Farina, H. M. Dahlan
• Citations: 47 (Details)

• Synthesis and Spectroscopic Characterization of Undoped Nanocrytalline ZnO Particles Prepared by Co-Precipitation, Materials Sciences and Applications, Vol.3 No.8, 2012
• Suhendro Purbo Prakoso, Rosari Saleh
• Citations: 47 (Details)

• Modeling and Optimization of Electrical Discharge Machining of SiC Parameters, Using Neural Network and Non-Dominating Sorting Genetic Algorithm (NSGA II), Materials Sciences and Applications, Vol.2 No.6, 2011
• Ramezan Ali MahdaviNejad
• Citations: 46 (Details)

• Growth Mechanism of Zno Films Deposited by Spray Pyrolysis Technique, Materials Sciences and Applications, Vol.2 No.6, 2011
• Bhavana Godbole, Nitu Badera, Shyambihari Shrivastava, Deepti Jain, Vganesan Ganesan
• Citations: 45 (Details)

• Corrosion Inhibition of Mild Steel in Hydrochloric Acid by Tannins Rom Rhizophora Racemosa, Materials Sciences and Applications, Vol.2 No.6, 2011
• Makanjuola Oki, Ebitei Charles, Collins Alaka, Tambari Kayode Oki
• Citations: 45 (Details)

• Fracture Toughness Studies of Polypropylene- Clay Nanocomposites and Glass Fibre Reinfoerced Polypropylene Composites, Materials Sciences and Applications, Vol.1 No.5, 2010
• A. Ramsaroop, K. Kanny, T. P. Mohan
• Citations: 44 (Details)

• Surface Modification of Hollow Glass Microspheres, Materials Sciences and Applications, Vol.3 No.12, 2012
• Fredrick N. Mutua, Peijie Lin, Jacob K. Koech, Yimin Wang
• Citations: 44 (Details)

• Synthesis and Characterization of Alumina-Zirconia Powders Obtained by Sol-Gel Method: Effect of Solvent and Water Addition Rate, Materials Sciences and Applications, Vol.3 No.9, 2012
• Julio Del Angel, Alberto F. Aguilera, Ignacio R. Galindo, Merced Martínez, Tomas Viveros
• Citations: 44 (Details)

• Comparison between Microwave Infrared Thermography and CO₂ Laser Infrared Thermography in Defect Detection in Applications with CFRP, Materials Sciences and Applications, Vol.4 No.10, 2013
• Sam-Ang Keo, Didier Defer, Florin Breaban, Franck Brachelet
• Citations: 44 (Details)

• The Use of Exoskeletons of Shrimp (Litopenaeus vanammei) and Crab (Ucides cordatus) for the Extraction of Chitosan and Production of Nanomembrane, Materials Sciences and Applications, Vol.3 No.7, 2012
• Sânia M. B. de Andrade, Rasiah Ladchumananandasivam, Brismak G. da Rocha, Débora D. Belarmino, Alcione O. Galvão
• Citations: 43 (Details)

• The Influence of Zn²⁺ Ions Substitution on the Microstructure and Transport Properties of Mn-Zn Nanoferrites, Materials Sciences and Applications, Vol.5 No.13, 2014
• Mohamed Ali Ahmed, Kasim El-Sayed Rady, Kamel Mohamed El-Shokrofy, Ahmed Abo Arais, Mohamed Said Shams
• Citations: 43 (Details)

• Morphology, Thermal Behavior and Dynamic Rheological Properties of Wood Polypropylene Composites, Materials Sciences and Applications, Vol.4 No.11, 2013
• Diène Ndiaye, Vincent Verney, Haroutioun Askanian, Sophie Commereuc, Adams Tidjani
• Citations: 42 (Details)

• Effect of Nano Size TiO₂ Particles on Mechanical Properties of AWS E 11018M Type Electrode, Materials Sciences and Applications, Vol.2 No.9, 2011
• Tapan Kumar Pal, Utpal Kumar Maity
• Citations: 42 (Details)

• Ultraviolet Protection, Flame Retardancy and Antibacterial Properties of Treated Polyester Fabric Using Plasma-Nano Technology, Materials Sciences and Applications, Vol.2 No.10, 2011
• Wafaa M. Raslan, Usama S. Rashed, Hanan El-Sayad, Azza A. El-Halwagy
• Citations: 42 (Details)

• The Role of Oxide Thin Layer in Inverted Structure Polymer Solar Cells, Materials Sciences and Applications, Vol.2 No.12, 2011
• Orawan Wiranwetchayan, Zhiqiang Liang, Qifeng Zhang, Guozhong Cao, Pisith Singjai
• Citations: 41 (Details)

• Functionalization of Cobalt Ferrite Nanoparticles with Alginate Coating for Biocompatible Applications, Materials Sciences and Applications, Vol.2 No.9, 2011
• Prasad M. Tamhankar, Aparna M. Kulkarni, Shrikant C. Watawe
• Citations: 41 (Details)

• Pervaporation Characteristics in Removal of Benzene from Water through Polystyrene-Poly (Dimethylsiloxane) IPN Membranes, Materials Sciences and Applications, Vol.2 No.3, 2011
• Tadashi Uragami, Iusaku Sumida, Takashi Miyata, Tadashi Shiraiwa, Hiroshi Tamura, Tatsuo Yajima
• Citations: 41 (Details)

• Improvement of Thermal Stability and Tribological Performance of Diamond-Like Carbon Composite Thin Films, Materials Sciences and Applications, Vol.4 No.10, 2013
• Chavin Jongwannasiri, Xianghui Li, Shuichi Watanabe
• Citations: 41 (Details)

• Room Temperature Synthesis of Aminocaproic Acid-Capped Lead Sulphide Nanoparticles, Materials Sciences and Applications, Vol.3 No.2, 2012
• Jayesh D. Patel, Frej Mighri, Abdellah Ajji, Saïd Elkoun
• Citations: 41 (Details)

• Effect of Sintering Temperature on Structural and Magnetic Properties of Ni_0.55Zn_0.45Fe₂O₄ Ferrites, Materials Sciences and Applications, Vol.3 No.5, 2012
• Robiul Islam, Md Obaidur Rahman, M. Abdul Hakim, Dilip Kumar Saha, Saiduzzaman Saiduzzaman, Saroaut Noor, Md Al-Mamun
• Citations: 41 (Details)

• Boron Nitride Nanostructured: Synthesis, Characterization and Potential Use in Cosmetics, Materials Sciences and Applications, Vol.4 No.1, 2013
• Líliam Márcia Silva Ansaloni, Edésia Martins Barros de Sousa
• Citations: 41 (Details)

• Relationship between Fracture Toughness and Fracture Surface Fractal Dimension in AISI 4340 Steel, Materials Sciences and Applications, Vol.4 No.4, 2013
• Luis R. Carney, John J. Mecholsky
• Citations: 41 (Details)

• Fabrication and Characterization of PCBM:P3HT Bulk Heterojunction Solar Cells Doped with Germanium Phthalocyanine or Germanium Naphthalocyanine, Materials Sciences and Applications, Vol.4 No.4A, 2013
• Kazumi Yoshida, Takeo Oku, Atsushi Suzuki, Tsuyoshi Akiyama, Yasuhiro Yamasaki
• Citations: 41 (Details)

• On the Role of Copper and Cooling Rates on the Microstructure, Defect Formations and Mechanical Properties of Al-Si-Mg Alloys, Materials Sciences and Applications, Vol.4 No.3, 2013
• Salem Seifeddine, Emma Sjölander, Toni Bogdanoff
• Citations: 41 (Details)

• Synthesis and Characterization of LaNixCo1-xO3 Perovskites via Complex Precursor Methods, Materials Sciences and Applications, Vol.1 No.2, 2010
• Grace Rafaela Oliveira Silva, José Carlos Santos, Danielle M. H. Martinelli, Anne Michelle Garrido Pedrosa, Marcelo José Barros de Souza, Dulce Maria Araujo Melo
• Citations: 40 (Details)

• Development of Longer-Lasting Insect Repellence Cellulosic Based Curtain Fabrics, Materials Sciences and Applications, Vol.2 No.3, 2011
• Shahba Afaf Farag, Halawa Osama, Ragaei Mohamed, Hashem Mohamed
• Citations: 39 (Details)

• Analysis of the Rheological Behavior of Aging Bitumen and Predicting the Risk of Permanent Deformation of Asphalt, Materials Sciences and Applications, Vol.4 No.5, 2013
• Samia Saoula, Khedoudja Soudani, Smail Haddadi, Maria Eugenia Munoz, Antxon Santamaria
• Citations: 39 (Details)

• Al-Doping Effect on the Surface Morphology of ZnO Films Grown by Reactive RF Magnetron Sputtering, Materials Sciences and Applications, Vol.4 No.12, 2013
• Erica Pereira da Silva, Michel Chaves, Gilvan Junior da Silva, Larissa Baldo de Arruda, Paulo Noronha Lisboa-Filho, Steven Frederick Durrant, José Roberto Ribeiro Bortoleto
• Citations: 38 (Details)

• Characteristics of SnO₂:F Thin Films Deposited by Ultrasonic Spray Pyrolysis: Effect of Water Content in Solution and Substrate Temperature, Materials Sciences and Applications, Vol.3 No.10, 2012
• Mario A. Sánchez-García, Arturo Maldonado, Luis Castañeda, Rutilo Silva-González, María de la Luz Olvera
• Citations: 38 (Details)

• The Effect of Water Absorption on Mechanical Properties of Wood Flour/Wheat Husk Polypropylene Hybrid Composites, Materials Sciences and Applications, Vol.3 No.5, 2012
• Pradeep Upadhyaya, Manoj Garg, Vijai Kumar, Ajay K. Nema
• Citations: 38 (Details)

• Optical and Electrical Properties of Doped and Undoped Bi₂S₃)-PVA Films Prepared by Chemical Drop Method, Materials Sciences and Applications, Vol.2 No.3, 2011
• Anayara Begum, Amir Hussain, Atowar Rahman
• Citations: 38 (Details)

• Structural and Ion Transport Studies in (100-x) PVdF + xNH₄SCN Gel Electrolyte, Materials Sciences and Applications, Vol.2 No.7, 2011
• Kamlesh Pandey, Mrigank Mauli Dwivedi, Nidhi Asthana, Markandey Singh, Shanker Lal Agrawal
• Citations: 38 (Details)

• Synthesis, Structural and Physical Properties of Cu_1–xZn_xFe₂O₄ Ferrites, Materials Sciences and Applications, Vol.2 No.11, 2011
• Shahida Akhter, Deba Prasad Paul, Md. Abdul Hakim, Dilip Kumar Saha, Md. Al-Mamun, Alhamra Parveen
• Citations: 38 (Details)

• Structural and Electronic Properties Calculations of Al _xIn_1-x P Alloy, Materials Sciences and Applications, Vol.2 No.7, 2011
• Mohammed Ameri, Ali Bentouaf, Mohammed Doui-Aici, Rabah Khenata, Fatima Boufadi, Amina Touia
• Citations: 37 (Details)

• Different Approaches of Employing Cholesteric Liquid Crystals in Dye Lasers, Materials Sciences and Applications, Vol.2 No.2, 2011
• Guram Chilaya, Andro Chanishvili, Gia Petriashvili, Riccardo Barberi, Maria Penelope De Santo, Mario Ariosto Matranga
• Citations: 37 (Details)

• Morphology Characterization and Kinetics Evaluation of Pitting Corrosion of Commercially Pure Aluminium by Digital Image Analysis, Materials Sciences and Applications, Vol.3 No.5, 2012
• Marinalda C. Pereira, José W. J. Silva, Heloisa A. Acciari, Eduardo N. Codaro, Luis R. O. Hein
• Citations: 37 (Details)

• Morphology and Thermal Properties of Core-Shell PVA/PLA Ultrafine Fibers Produced by Coaxial Electrospinning, Materials Sciences and Applications, Vol.6 No.2, 2015
• Raquel P. Gonçalves, Flavia F. F. da Silva, Paulo H. S. Picciani, Marcos L. Dias
• Citations: 37 (Details)

• Structure Change of Polyethersulfone Hollow Fiber Membrane Modified with Pluronic F127, Polyvinylpyrrolidone, and Tetronic 1307, Materials Sciences and Applications, Vol.3 No.2, 2012
• Nasrul Arahman, Bastian Arifin, Sri Mulyati, Yoshikage Ohmukai, Hideto Matsuyama
• Citations: 36 (Details)

• Influence of Cr³⁺ Ion on the Dielectric Properties of Nano Crystalline Mg-Ferrites Synthesized by Citrate-Gel Method, Materials Sciences and Applications, Vol.4 No.7, 2013
• M. Raghasudha, D. Ravinder, P. Veerasomaiah
• Citations: 36 (Details)

• Synthesis and Electrical Characterization of BaTiO3 Thin Films on Si(100), Materials Sciences and Applications, Vol.1 No.4, 2010
• V. R. Chinchamalatpure, S. A. Ghosh, G. N. Chaudhari
• Citations: 35 (Details)

• Studies on Photocatalytic Degradation of Acridine Orange and Chloroform Sensing Using As-Grown Antimony oxide Microstructures, Materials Sciences and Applications, Vol.2 No.6, 2011
• Aslam Jamal, Mohammed M Rahman, M. Faisal, Sher Bahadar Khan
• Citations: 35 (Details)

• Efficient Facilitated Transport of Lead and Cadmium Across a Plasticized Triacetate Membrane Mediated by D2EHPA and TOPO, Materials Sciences and Applications, Vol.2 No.6, 2011
• Omar Arous, Fairouz Saad Saoud, Mourad Amara, Hacène Kerdjoudj
• Citations: 35 (Details)

• Novel Activated Carbon Monoliths for Methane Adsorption Obtained from Coffee Husks, Materials Sciences and Applications, Vol.2 No.5, 2011
• Liliana Giraldo, Juan Carlos Moreno-Piraján
• Citations: 35 (Details)

• Elevated Temperatures Tensile Characteristics of Cast A356/Al₂O₃ Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques, Materials Sciences and Applications, Vol.2 No.5, 2011
• El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Mohamed Abdel-Aziz Sayed
• Citations: 35 (Details)

• In Situ Synthesis of Titanium Matrix Composite (Ti-TiB-TiC) through Sintering of TiH₂-B₄C, Materials Sciences and Applications, Vol.3 No.1, 2012
• Abdul Jimoh, Iakovos Sigalas, Mathias Hermann
• Citations: 35 (Details)

• Hydrothermal Synthesis of V₃O₇.^.H₂O Nanobelts and Study of Their Electrochemical Properties, Materials Sciences and Applications, Vol.2 No.8, 2011
• Mohamed Kamel Chine, Faouzi Sediri, Neji Gharbi
• Citations: 35 (Details)

• Deactivation Processes, Regeneration Conditions and Reusability Performance of CaO or MgO Based Catalysts Used for Biodiesel Production—A Review, Materials Sciences and Applications, Vol.8 No.1, 2017
• Nombamba Oueda, Yvonne L. Bonzi-Coulibaly, Igor W. K. Ouédraogo
• Citations: 35 (Details)

• Electromagnetic Waves Absorbing Characteristics of Composite Material Containing Carbonyl Iron Particles, Materials Sciences and Applications, Vol.5 No.11, 2014
• Victor A. Zhuravlev, Valentin I. Suslyaev, Evgeny Yu. Korovin, Kyrill V. Dorozhkin
• Citations: 34 (Details)

• Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061, Materials Sciences and Applications, Vol.6 No.6, 2015
• Avijit Sinha, Zoheir Farhat
• Citations: 34 (Details)

• Electrophoretic Deposition of Titanium Oxide Nanoparticle Films for Dye-Sensitized Solar Cell Applications, Materials Sciences and Applications, Vol.2 No.10, 2011
• Jason Bandy, Qifeng Zhang, Guozhong Cao
• Citations: 34 (Details)

• Enhanced Thermoelectric Properties of BiCoO₃ by Nickel Substitution, Materials Sciences and Applications, Vol.4 No.12, 2013
• T. Ramachandran, N. E. Rajeevan, P. P. Pradyumnan
• Citations: 34 (Details)

• Investigation of the Surface Morphology and Structural Characterization of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene (PF-ABS) Composites, Materials Sciences and Applications, Vol.5 No.6, 2014
• Budrun Neher, Md. Abdul Gafur, Muhammad Abdullah Al-Mansur, Md. Mahbubur Rahman Bhuiyan, Md. Rakibul Qadir, Farid Ahmed
• Citations: 34 (Details)

• In Situ Hydroxyapatite Synthesis: Influence of Collagen on Its Structural and Morphological Characteristic, Materials Sciences and Applications, Vol.3 No.8, 2012
• Luis C. Mendes, Geysy L. Ribeiro, Raphaella C. Marques
• Citations: 34 (Details)

• FP-LMTO Calculations of Structural and Electronic Properties of Alkaline-Earth Chalcogenides Alloys AY:A = Ca, Sr, Ba; Y = S, Materials Sciences and Applications, Vol.3 No.12, 2012
• Mohammed Ameri, Keltouma Boudia, Abbes Rabhi, Samir Benaissa, Yarub Al-Douri, Abdelmadjid Rais, Djelloul Hachemane
• Citations: 34 (Details)

• Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel, Materials Sciences and Applications, Vol.3 No.8, 2012
• Nurudeen Adekunle Raji, Oluleke Olugbemiga Oluwole
• Citations: 33 (Details)

• Dielectric and Microwave Properties of Natural Rubber Based Nanocomposites Containing Graphene, Materials Sciences and Applications, Vol.3 No.7, 2012
• Omar A. Al-Hartomy, Ahmed Al-Ghamdi, Nikolay Dishovsky, Rossitsa Shtarkova, Vladimir Iliev, Ibrahim Mutlay, Farid El-Tantawy
• Citations: 33 (Details)

• Corrosion Behavior of Heat Treated Nickel-Aluminum Bronze Alloy in Artificial Seawater, Materials Sciences and Applications, Vol.2 No.11, 2011
• Ashkan Vakilipour Takaloo, Mohammad Reza Daroonparvar, Mehdi Mazar Atabaki, Kamran Mokhtar
• Citations: 33 (Details)

• Synthesis and Magnetic Properties of Conventional and Microwave Calcined Strontium Hexaferrite Powder, Materials Sciences and Applications, Vol.2 No.6, 2011
• Kanagesan Samikannu, Jesurani Sinnappan, Sivakumar Mannarswamy, Thirupathi Cinnasamy, Kalaivani Thirunavukarasu
• Citations: 33 (Details)

• Biosorption of Cu(II) Ions from Aqueous Solution by Red Alga (Palmaria Palmata) and Beer Draff, Materials Sciences and Applications, Vol.2 No.2, 2011
• Yang Li, Brigitte Helmreich, Harald Horn
• Citations: 33 (Details)

• Effect of Curing Environment on the Strength Properties of Cement and Cement Extenders, Materials Sciences and Applications, Vol.6 No.1, 2015
• Mark Bediako, J. T. Kevern, Eric Opoku Amankwah
• Citations: 33 (Details)

• Silver Nanoparticles Supported on TiO₂ and Their Antibacterial Properties: Effect of Surface Confinement and Nonexistence of Plasmon Resonance, Materials Sciences and Applications, Vol.5 No.12, 2014
• Zoe Vineth Quiñones-Jurado, Miguel Ángel Waldo-Mendoza, Hugo Marcelo Aguilera-Bandin, Edgar Giovanny Villabona-Leal, Elsa Cervantes-González, Elías Pérez
• Citations: 32 (Details)

• Investigating the Relationship between Porosity and Permeability Coefficient for Pervious Concrete Pavement by Statistical Modelling, Materials Sciences and Applications, Vol.7 No.2, 2016
• Hassan Tajik Ghashghaei, Abolfazl Hassani
• Citations: 32 (Details)

• Development of a Low Temperature Sol-Gel-Derived Titania-Silica Implant Coating, Materials Sciences and Applications, Vol.1 No.3, 2010
• Virpi Ääritalo, Ville Meretoja, Teemu Tirri, Sami Areva, Timo Jämsä, Juha Tuukkanen, Ari Rosling, Timo Närhi
• Citations: 32 (Details)

• Blue-Shift and Enhanced Photoluminescence in BaMgAl10O17:Eu2+ Nanophosphor under VUV Excitation for PDPs Application, Materials Sciences and Applications, Vol.1 No.1, 2010
• Raghvendra Singh Yadav, Shiv Kumar Pandey, Avinash Chandra Pandey
• Citations: 32 (Details)

• TiO₂/CuO Films Obtained by Citrate Precursor Method for Photocatalytic Application, Materials Sciences and Applications, Vol.2 No.6, 2011
• Leinig Perazolli, Luciana Nuñez, Milady Renata Apolinário da Silva, Guilherme Francisco Pegler, Ademir Geraldo Cavalarri Costalonga, Rossano Gimenes, Márcia Matiko Kondo, Maria Aparecida Zaghete Bertochi
• Citations: 32 (Details)

• Process Parameters Optimization of an Aluminium Alloy with Pulsed Gas Tungsten Arc Welding (GTAW) Using Gas Mixtures, Materials Sciences and Applications, Vol.2 No.4, 2011
• Pawan Kumar, Kishor Purushottamrao Kolhe, Sashikant Janardan Morey, Chanchal Kumar Datta
• Citations: 32 (Details)

• Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel, Materials Sciences and Applications, Vol.2 No.11, 2011
• Nurudeen A. Raji, Oluleke O. Oluwole
• Citations: 32 (Details)

• Studies on Mechanical and End-Use Properties of Natural Rubber Filled with Snail Shell Powder, Materials Sciences and Applications, Vol.2 No.7, 2011
• Isaac Ogbennaya Igwe, Augustina Adanna Ejim
• Citations: 32 (Details)

• Pyroelectric Properties of PVDF:MWCNT Nanocomposite Film for Uncooled Infrared Detectors, Materials Sciences and Applications, Vol.3 No.12, 2012
• Matthew E. Edwards, Ashok K. Batra, Ashwith K. Chilvery, Padmaja Guggilla, Michael Curley, Mohan D. Aggarwal
• Citations: 31 (Details)

• Ion and Gas Nitriding Applied to Steel Tool for Hot Work X38CrMoV5 Nitriding Type: Impact on the Wear Resistance, Materials Sciences and Applications, Vol.3 No.9, 2012
• S. Ben Slima
• Citations: 30 (Details)

• Alginate Reinforced Chitosan and Starch Beads in Slow Release Formulation of Imazaquin Herbicide—Preparation and Characterization, Materials Sciences and Applications, Vol.3 No.8, 2012
• Lami A. Nnamonu, Rufus Sha’Ato, Ikenna Onyido
• Citations: 30 (Details)

• Through-Thickness Thermal Conductivity Prediction Study on Nanocomposites and Multiscale Composites, Materials Sciences and Applications, Vol.3 No.3, 2012
• Michael Zimmer, Xinyu Fan, Jianwen Bao, Richard Liang, Ben Wang, Chuck Zhang, James Brooks
• Citations: 30 (Details)

• Effect of Preheat Temperatures on Mechanical Properties and Polymerization Contraction Stress of Dental Composites, Materials Sciences and Applications, Vol.4 No.6, 2013
• Pavinee P. Didron, Ayman Ellakwa, Michael V. Swain
• Citations: 30 (Details)

• Ashes of Biogenic Wastes—Pozzolanicity, Prospects for Use, and Effects on Some Engineering Properties of Concrete, Materials Sciences and Applications, Vol.4 No.9, 2013
• Chinwuba Arum, Catherine Mayowa Ikumapayi, Grace Oluwaseun Aralepo
• Citations: 30 (Details)

• Effect of Ge Incorporation on Bandgap and Photosensitivity of Amorphous SiGe Thin Films, Materials Sciences and Applications, Vol.3 No.2, 2012
• Gopal G. Pethuraja, Roger E. Welser, Ashok K. Sood, Changwoo Lee, Nicholas J. Alexander, Harry Efstathiadis, Pradeep Haldar, Jennifer L. Harvey
• Citations: 30 (Details)

• Crosslinking as an Efficient Tool for Decreasing Moisture Sensitivity of Biobased Nanocomposite Films, Materials Sciences and Applications, Vol.2 No.5, 2011
• Jari Vartiainen, Ali Harlin
• Citations: 30 (Details)

• A TEM Study of Cobalt-Base Alloy Prototypes Fabricated by EBM, Materials Sciences and Applications, Vol.2 No.5, 2011
• Sara M. Gaytan, Larry E. Murr, Diana A. Ramirez, Brenda I. Machado, Edwin Martinez, Daniel H. Hernandez, Jose L. Martinez, Francisco Medina, Ryan B. Wicker
• Citations: 30 (Details)

• Elastic and Viscoelastic Poisson’s Ratios: The Theoretical Mechanics Perspective, Materials Sciences and Applications, Vol.8 No.4, 2017
• Harry H. Hilton
• Citations: 30 (Details)

• Evolution of Microstructure from the Surface to the Interior of Cr-Mo Steel by Water Jet Peening, Materials Sciences and Applications, Vol.8 No.10, 2017
• Masataka Ijiri, Daichi Shimonishi, Daisuke Nakagawa, Toshihiko Yoshimura
• Citations: 29 (Details)

• Using Cavitation Peening to Improve the Fatigue Life of Titanium Alloy Ti-6Al-4V Manufactured by Electron Beam Melting, Materials Sciences and Applications, Vol.7 No.4, 2016
• Mitsuru Sato, Osamu Takakuwa, Masaaki Nakai, Mitsuo Niinomi, Fumio Takeo, Hitoshi Soyama
• Citations: 29 (Details)

• MgO and ZnO Composite Thin Films Using the Spin Coating Method on Microscope Glasses, Materials Sciences and Applications, Vol.6 No.1, 2015
• Ayşe Kaya Balta, Özlem Ertek, Nail Eker, İbrahim Okur
• Citations: 29 (Details)

• Anti-Corrosion Performance of Cr+6-Free Passivating Layers Applied on Electrogalvanized, Materials Sciences and Applications, Vol.1 No.4, 2010
• Célia Regina Tomachuk, Alejandro Ramón Di Sarli, Cecilia Inés Elsner
• Citations: 29 (Details)

• Electric Modulus Analysis of Carbon Black/Copolymer Composite Materials, Materials Sciences and Applications, Vol.2 No.10, 2011
• Mohamed El Hasnaoui, Manuel Pedro Fernanades Graça, Mohammed Essaid Achour, Luís Cadillon Costa
• Citations: 29 (Details)

• Synthesis and Characterization of (Ru-Sn)O₂ Nanoparticles for Supercapacitors, Materials Sciences and Applications, Vol.2 No.9, 2011
• Venkata Subba Reddy Channu, Rudolf Holze, Scott Ambrose Wicker Sr., Edwin H. Walker Jr., Quinton L. Williams, Rajamohan R. Kalluru
• Citations: 29 (Details)

• The Effect of Storage Solutions on Mineral Content of Enamel, Materials Sciences and Applications, Vol.4 No.7, 2013
• Asli Secilmis, Erhan Dilber, Nilgun Ozturk, Fatma Gokmen Yilmaz
• Citations: 29 (Details)

• Effect of Antimony Additions on Corrosion and Mechanical Properties of Sn-Bi Eutectic Lead-Free Solder Alloy, Materials Sciences and Applications, Vol.3 No.6, 2012
• Alberto Torres, Luis Hernández, Octavio Domínguez
• Citations: 29 (Details)

• Synthesis and Ultrasonic Investigations of CuO-PVA Nanofluid, Materials Sciences and Applications, Vol.3 No.9, 2012
• Vimal Pandey, Giridhar Mishra, S. K. Verma, Meher Wan, R. R. Yadav
• Citations: 29 (Details)

• Facile Synthesis and Characterization of Nanoporous NiO with Folic Acid as Photodegredation Catalyst for Congo Red, Materials Sciences and Applications, Vol.3 No.10, 2012
• Faezeh Farzaneh, Sara Haghshenas
• Citations: 29 (Details)

• FE Modeling and Analysis of Isotropic and Orthotropic Beams Using First Order Shear Deformation Theory, Materials Sciences and Applications, Vol.4 No.1, 2013
• M. Adnan Elshafei
• Citations: 29 (Details)

• Understanding the Properties of Silicon Solar Cells Aluminium Contact Layers and Its Effect on Mechanical Stability, Materials Sciences and Applications, Vol.4 No.2, 2013
• V. A. Popovich, M. P. F. H. L. van Maris, M. Janssen, I. J. Bennett, I. M. Richardson
• Citations: 28 (Details)

• Characterization and Electromagnetic Studies on NiZn and NiCuZn Ferrites Prepared by Microwave Sintering Technique, Materials Sciences and Applications, Vol.3 No.9, 2012
• Matli Penchal Reddy, Il Gon Kim, Dong Sun Yoo, Wuppati Madhuri, Nagireddy R. Reddy, Kota Venkata Siva Kumar, Rajuru R. Reddy
• Citations: 28 (Details)

• Preparation and Gas Barrier Characteristics of Polysilazane-Derived Silica Thin Films Using Ultraviolet Irradiation, Materials Sciences and Applications, Vol.5 No.3, 2014
• T. Ohishi, S. Sone, K. Yanagida
• Citations: 28 (Details)

• Influences of Silver-Doping on the Crystal Structure, Morphology and Photocatalytic Activity of TiO₂ Nanofibers, Materials Sciences and Applications, Vol.2 No.9, 2011
• Nasser A. M. Barakat, Muzafar A. Kanjwal, Salem S. Al-Deyab, Ioannis S. Chronakis
• Citations: 28 (Details)

• Temperature Dependence of the Magnetic and Electric Properties of Ca₂Fe₂O₅, Materials Sciences and Applications, Vol.2 No.9, 2011
• Cléber Candido da Silva, Antonio S. B. Sombra
• Citations: 28 (Details)

• Dielectric Behaviour of Pure and Dye Doped Nematic Liquid Crystal BKS/B07, Materials Sciences and Applications, Vol.2 No.7, 2011
• Rajiv Manohar, Shashwati Manohar, V. S. Chandel
• Citations: 28 (Details)

• Electrochemical and Microstructural Study of Ni-Cr-Mo Alloys Used in Dental Prostheses, Materials Sciences and Applications, Vol.2 No.1, 2011
• José W. J. Silva, Lucíola L. Sousa, Roberto Z. Nakazato, Eduardo N. Codaro, Hamilton de Felipe
• Citations: 28 (Details)

• Flame Retardancy Enhancement of Hybrid Composite Material by Using Inorganic Retardants, Materials Sciences and Applications, Vol.2 No.8, 2011
• Mohammed Al-Maamori, A Al-Mosawi, Abbass Hashim
• Citations: 27 (Details)

• Mineralogical Study of Polymer-Mortar Composites with PET Polymer by Means of Spectroscopic Analyses, Materials Sciences and Applications, Vol.3 No.3, 2012
• Ahmed Soufiane Benosman, Mohamed Mouli, Hamed Taibi, Mohamed Belbachir, Yassine Senhadji, Ilies Behlouli, David Houivet
• Citations: 27 (Details)

• Electro-Oxidation of Glucose in Alkaline Media on Graphene Sheets Decorated with Gold Nanoparticles, Materials Sciences and Applications, Vol.4 No.2, 2013
• Marek Wojnicki, Magdalena Luty-Błocho, Iwona Dobosz, Justyna Grzonka, Krzysztof Pacławski, Krzysztof J. Kurzydłowski, Krzysztof Fitzner
• Citations: 27 (Details)

• Development of Biobased Poly(Lactic Acid)/Epoxidized Natural Rubber Blends Processed by Electrospinning: Morphological, Structural and Thermal Properties, Materials Sciences and Applications, Vol.7 No.4, 2016
• Jaqueline G. L. Cosme, Vanessa M. Silva, Regina R. C. Nunes, Paulo H. S. Picciani
• Citations: 27 (Details)

• Effect of the Addiction of Metal Oxide Nanoparticles on the Physical, Chemical and Thermal Properties of PVA Based Nanocomposites, Materials Sciences and Applications, Vol.9 No.5, 2018
• Raquel Couto de Azevedo Gonçalves Mota, Emerson Oliveira da Silva, Lívia Rodrigues de Menezes
• Citations: 27 (Details)

• A Review on Zinc Sulphide Thin Film Fabrication for Various Applications Based on Doping Elements, Materials Sciences and Applications, Vol.9 No.9, 2018
• Md. Anisuzzaman Shakil, Sangita Das, Md. Ashiqur Rahman, Umma Salma Akther, Md. Kamrul Hassan Majumdar, Md. Khalilur Rahman
• Citations: 27 (Details)

• Porosity Effects on Interlaminar Fracture Behavior in Carbon Fiber-Reinforced Polymer Composites, Materials Sciences and Applications, Vol.8 No.2, 2017
• Issa A. Hakim, Steven L. Donaldson, Norbert G. Meyendorf, Charles E. Browning
• Citations: 26 (Details)

• Wear Resistance and Indentation Behavior of Equiatomic Superelastic TiNi and 60NiTi, Materials Sciences and Applications, Vol.6 No.7, 2015
• Rabin Neupane, Zoheir Farhat
• Citations: 26 (Details)

• Stress Analysis on Single-Crystal Diamonds by Raman Spectroscopy 3D Mapping, Materials Sciences and Applications, Vol.4 No.3, 2013
• E. J. Di Liscia, F. Álvarez, E. Burgos, E. B. Halac, H. Huck, M. Reinoso
• Citations: 26 (Details)

• Physicochemical Characteristics of Some Cameroonian Pozzolans for Use in Sustainable Cement Like Materials, Materials Sciences and Applications, Vol.4 No.1, 2013
• Ndigui Billong, Uphie Chinje Melo, Daniel Njopwouo, François Louvet, Jean Pierre Bonnet
• Citations: 26 (Details)

• Electrochemical Behavior and Corrosion Study of Electrodeposits of Zn and Zn-Fe-Co on Steel, Materials Sciences and Applications, Vol.3 No.6, 2012
• Conceição A. M. Dutra, Eduardo N. Codaro, Roberto Z. Nakazato
• Citations: 26 (Details)

• Edible Coating for Shelf-Life Extension of Fresh Banana Fruit Based on Gamma Irradiated Plasticized Poly(vinyl alcohol)/Carboxymethyl Cellulose/Tannin Composites, Materials Sciences and Applications, Vol.5 No.6, 2014
• Magdy M. H. Senna, Khalid M. Al-Shamrani, Abdullah S. Al-Arifi
• Citations: 26 (Details)

• Chromium-Doped ZnO Nanoparticles Synthesized by Co-Precipitation: Chromium Effects, Materials Sciences and Applications, Vol.4 No.9, 2013
• Santi Septiani Sartiman, Nadia Febiana Djaja, Rosari Saleh
• Citations: 26 (Details)

• Characterization of Porosity in a Laser Sintered MMCp Using X-Ray Synchrotron Phase Contrast Microtomography, Materials Sciences and Applications, Vol.2 No.9, 2011
• Emmanuelle Girardin, Chiara Renghini, Jack Dyson, Vittorio Calbucci, Francesca Moroncini, Gianni Albertini
• Citations: 26 (Details)

• Printability of HDPE/Natural Fiber Composites with High Content of Cellulosic Industrial Waste, Materials Sciences and Applications, Vol.2 No.9, 2011
• Luis Claudio Mendes, Sibele Piedade Cestari
• Citations: 26 (Details)

• Precipitation Kinetics and Mechanism in Cu-7 wt% Ag Alloy, Materials Sciences and Applications, Vol.2 No.7, 2011
• Djamel Hamana, Mohamed Hachouf, Leila Boumaza, Zine El Abidine Biskri
• Citations: 26 (Details)

• Synthesis of Amine-type Adsorbents with Emulsion Graft Polymerization of 4-hydroxybutyl Acrylate Glycidylether, Materials Sciences and Applications, Vol.2 No.7, 2011
• Hongjuan Ma, Kazuaki Morita, Hiroyuki Hoshina, Noriaki Seko
• Citations: 26 (Details)

• Experimental and Numerical Analysis of Forming Limit Diagram (FLD) and Forming Limit Stress Diagram (FLSD), Materials Sciences and Applications, Vol.2 No.5, 2011
• Mehdi Safari, Seyed Jamal Hosseinipour, Hamed Deilami Azodi
• Citations: 26 (Details)

• Preparation and Catalytic Properties of Ti-SBA-15 Mesoporous Materials, Materials Sciences and Applications, Vol.2 No.6, 2011
• Wenhao Ye, Zheng Lin, Beibei Dong, Jinfeng Kang, Xiucheng Zheng, Xiangyu Wang
• Citations: 25 (Details)

• Design of 2,4-Dichlorophenoxyacetic Acid Imprinted Polymer with High Specificity and Selectivity, Materials Sciences and Applications, Vol.2 No.3, 2011
• Kizhakekuthiathottil Mathew Annamma, Mathew Beena
• Citations: 25 (Details)

• The Properties of Nanohydroxyapatite Materials and its Biological Effects, Materials Sciences and Applications, Vol.1 No.2, 2010
• Xiaofeng Pang, Hongjuan Zeng, Jialie Liu, Shicheng Wei, Yufeng Zheng
• Citations: 25 (Details)

• A Study of the Optical Properties in ZnWO₄ Nanorods Synthesized by Hydrothermal Method, Materials Sciences and Applications, Vol.2 No.8, 2011
• Nguyen Van Minh, Nguyen Manh Hung
• Citations: 25 (Details)

• Facile Synthesis and Thermal Stability of Nanocrystalline Molybdenum Carbide, Materials Sciences and Applications, Vol.2 No.9, 2011
• Youjian Chen, Hong Zhang, Jinfeng Zhang, Jianhua Ma, Hongnan Ye, Gaojin Qian, Yi Ye, Shuang Zhong
• Citations: 25 (Details)

• Microstructural Evaluation and Mechanical Properties of an Al-Zn-Mg-Cu-Alloy after Addition of Nickel under RRA Conditions, Materials Sciences and Applications, Vol.4 No.11, 2013
• Haider T. Naeem, Kahtan S. Mohammed
• Citations: 25 (Details)

• Dielectric Relaxation in Complex Perovskite Oxide Sr(Gd_0.5Nb_0.5)O₃, Materials Sciences and Applications, Vol.3 No.6, 2012
• Pritam Kumar, Ajay Kumar Sharma, Bhrigunandan Prasad Singh, Tripurari Prasad Sinha, Narendra Kumar Singh
• Citations: 25 (Details)

• Synthesis and Characterization of Mesoporous Aluminosilicates for Copper Removal from Aqueous Medium, Materials Sciences and Applications, Vol.3 No.7, 2012
• David Alejandro de Haro-Del Río, Alberto Florentino Aguilera-Alvarado, Irene Cano-Aguilera, Merced Martínez-Rosales, Stuart Holmes
• Citations: 25 (Details)

• Effect of Waste Oil-Cracking Catalyst Incorporation on Durability of Mortars, Materials Sciences and Applications, Vol.5 No.13, 2014
• Carla Costa, M. Sofia Ribeiro, Nuno Brito
• Citations: 25 (Details)

• Properties of Geopolymers Made from Fired Clay Bricks Wastes and Rice Husk Ash (RHA)-Sodium Hydroxide (NaOH) Activator, Materials Sciences and Applications, Vol.8 No.7, 2017
• Lynn Myllyam Beleuk à Moungam, Hawa Mohamed, Elie Kamseu, Ndigui Billong, Uphie Chinje Melo
• Citations: 25 (Details)

• Alkali Treatment and Cellulose Nanowhiskers Extracted from Maize Stalk Residues, Materials Sciences and Applications, Vol.6 No.11, 2015
• Tshwafo E. Motaung, Asanda Mtibe
• Citations: 25 (Details)

• Effect of 3 mol% Yttria Stabilized Zirconia Addition on Structural and Mechanical Properties of Alumina-Zirconia Composites, Materials Sciences and Applications, Vol.8 No.7, 2017
• M. A. Gafur, Md. Saifur Rahman Sarker, Md. Zahangir Alam, M. R. Qadir
• Citations: 24 (Details)

• Complex Protective Coatings for Graphite and Carbon-Carbon Composite Materials, Materials Sciences and Applications, Vol.6 No.10, 2015
• V. I. Zmij, S. G. Rudenkyi, A. G. Shepelev
• Citations: 24 (Details)

• Synthesis and Characterization of Mesostructured Cellular Foam (MCF) Silica Loaded with Nickel Nanoparticles as a Novel Catalyst, Materials Sciences and Applications, Vol.4 No.1, 2013
• Lilis Hermida, Ahmad Zuhairi Abdullah, Abdul Rahman Mohamed
• Citations: 24 (Details)

• The Use of Cavitation Peening to Increase the Fatigue Strength of Duralumin Plates Containing Fastener Holes, Materials Sciences and Applications, Vol.5 No.6, 2014
• Hitoshi Soyama
• Citations: 24 (Details)

• Fabrication and Characterization of Phthalocyanine-Based Organic Solar Cells, Materials Sciences and Applications, Vol.5 No.5, 2014
• Makoto Iwase, Atsushi Suzuki, Tsuyoshi Akiyama, Takeo Oku
• Citations: 24 (Details)

• Investigation of Polyaniline Thin Film and Schottky Junction with Aluminium for Electrical and Optical Characterization, Materials Sciences and Applications, Vol.2 No.8, 2011
• Pronob Jyoti Saikia, Pratap Chandra Sarmah
• Citations: 24 (Details)

• Nanoindentation Study of Al356-Al2O3 Nanocomposite Prepared by Ball Milling, Materials Sciences and Applications, Vol.1 No.4, 2010
• Y. Mazaheri, F. Karimzadeh, M. H. Enayati
• Citations: 24 (Details)

• Development of Cockleshell-Derived CaCO₃ for Flame Retardancy of Recycled PET/Recycled PP Blend, Materials Sciences and Applications, Vol.2 No.2, 2011
• Supaphorn Thumsorn, Kazushi Yamada, Yew Wei Leong, Hiroyuki Hamada
• Citations: 24 (Details)

• Grafting Vinyl Monomers onto Chitosan:IV:Graft Copolymerized of Acrylicacid onto Chitosan Using Ceric Ammonium Nitrate as the Initiator— Characterization and Antimicrobial Activities, Materials Sciences and Applications, Vol.2 No.12, 2011
• Manoj Kumar Pati, Padmalochan Nayak
• Citations: 23 (Details)

• Enhancement of Perovskite Solar Cells by Plasmonic Nanoparticles, Materials Sciences and Applications, Vol.7 No.12, 2016
• Mikhail Omelyanovich, Sergey Makarov, Valentin Milichko, Constantin Simovski
• Citations: 23 (Details)

• Corrosion Testing of a Heat Treated 316 L Functional Part Produced by Selective Laser Melting, Materials Sciences and Applications, Vol.8 No.3, 2017
• Evy De Bruycker, Maria L. Montero Sistiaga, Fabien Thielemans, Kim Vanmeensel
• Citations: 23 (Details)

• Composition and Band Gap Controlled AACVD of ZnSe and ZnS_xSe_1-x Thin Films Using Novel Single Source Precursors, Materials Sciences and Applications, Vol.8 No.10, 2017
• Yousef Alghamdi
• Citations: 22 (Details)

• Nonlinear Optical Properties of Novel Polypyrrole Derivatives Bearing Different Aromatic Segments, Materials Sciences and Applications, Vol.8 No.11, 2017
• Wei Zhao, Yun Wang, Aijian Wang
• Citations: 22 (Details)

• Compressive Strength of Metakaolin-Based Geopolymers: Influence of KOH Concentration, Temperature, Time and Relative Humidity, Materials Sciences and Applications, Vol.7 No.11, 2016
• Tania Ariadna García-Mejía, Ma. de Lourdes Chávez-García
• Citations: 22 (Details)

• Net-Shape Clay Ceramics with Glass Waste Additive, Materials Sciences and Applications, Vol.5 No.8, 2014
• Chantale Njiomou Djangang, Elie Kamseu, Antoine Elimbi, Gisèle Laure Lecomte, Philippe Blanchart
• Citations: 22 (Details)

• Rheological and Thermal Behavior of High-Density Polyethylene (HDPE) at Different Temperatures, Materials Sciences and Applications, Vol.5 No.13, 2014
• Cynthia D’Avila Carvalho Erbetta, Getúlio F. Manoel, Ana Paula Lelis Rodrigues Oliveira, Maria Elisa Scarpelli Ribeiro e Silva, Roberto Fernando Souza Freitas, Ricardo Geraldo Sousa
• Citations: 22 (Details)

• Application of Intra-Particle Combustion Model for Iron Ore Sintering Bed, Materials Sciences and Applications, Vol.2 No.5, 2011
• Pingli Hou, Sangmin Choi, Won Yang, Eungsoo Choi, Heejin Kang
• Citations: 22 (Details)

• Titanium Oxide Nanorods pH Sensors: Comparison between Voltammetry and Extended Gate Field Effect Transistor Measurements, Materials Sciences and Applications, Vol.5 No.7, 2014
• Elidia Maria Guerra, Marcelo Mulato
• Citations: 22 (Details)

• Evaluation of Corrosion Stability of Water Soluble Epoxy-Ester Primer through Electrochemical Studies, Materials Sciences and Applications, Vol.3 No.6, 2012
• Duraisamy Ramesh, Thiagarajan Vasudevan
• Citations: 22 (Details)

• Comparison of the Thermal Properties of Asbestos and Polyvinylchloride (PVC) Ceiling Sheets, Materials Sciences and Applications, Vol.3 No.4, 2012
• Michael Chukwudi Onyeaju, Evelyn Osarolube, Ephraim Okechukwu Chukwuocha, Chinedu Ekuma Ekuma, Great Arusuedafe Jacob Omasheye
• Citations: 22 (Details)

• Composition Dependence of Structure and Magnetic Properties in Manganese Doped Nanocrystalline ZnO Particles Prepared by Co-Precipitation, Materials Sciences and Applications, Vol.3 No.4, 2012
• Nadia Febiana Djaja, Rosari Saleh
• Citations: 21 (Details)

• The Effects of Porcelain Polishing Techniques on the Color and Surface Texture of Different Porcelain Systems, Materials Sciences and Applications, Vol.3 No.5, 2012
• Ali Riza Tuncdemir, Erhan Dilber, Haluk Baris Kara, A. Nilgun Ozturk
• Citations: 21 (Details)

• A Study on Wear Resistance, Hardness and Impact Behaviour of Carburized Fe-Based Powder Metallurgy Parts for Automotive Applications, Materials Sciences and Applications, Vol.3 No.8, 2012
• Ali Emamian
• Citations: 21 (Details)

• Ab Initio Study of Structural and Electronic Properties of Barium Chalcogenide Alloys, Materials Sciences and Applications, Vol.3 No.9, 2012
• Mohammed Ameri, Amina Touia, Houari Khachai, Zoubir Mahdjoub, Mohamed Zoheir Chekroun, Amel Slamani
• Citations: 21 (Details)

• Novel EPS/TiO2 Nanocomposite Prepared from Recycled Polystyrene, Materials Sciences and Applications, Vol.4 No.3, 2013
• G. M. Herrera-Sandoval, D. B. Baez-Angarita, S. N. Correa-Torres, O. M. Primera-Pedrozo, S. P. Hernández-Rivera
• Citations: 21 (Details)

• Ductile Fracture Characterization for Medium Carbon Steel Using Continuum Damage Mechanics, Materials Sciences and Applications, Vol.3 No.11, 2012
• Stergios Pericles Tsiloufas, Ronald Lesley Plaut
• Citations: 21 (Details)

• Correlation between Chemical Glass Components and the Glass Sticking on Sputtered PtIr Physical Vapour Deposition Coatings for Precision Blank Moulding, Materials Sciences and Applications, Vol.5 No.5, 2014
• Kirsten Bobzin, Nazlim Bagcivan, Tobias Brögelmann, Tobias Münstermann
• Citations: 21 (Details)

• Investigation of Self-Diffusion and Structure in Calcium Aluminosilicate Slags by Molecular Dynamics Simulation, Materials Sciences and Applications, Vol.5 No.2, 2014
• Kai Zheng, Feihua Yang, Xidong Wang, Zuotai Zhang
• Citations: 21 (Details)

• Controlled Growth of Well-Aligned Carbon Nanotubes, Electrochemical Modification and Electrodeposition of Multiple Shapes of Gold Nanostructures, Materials Sciences and Applications, Vol.4 No.11, 2013
• Haniyeh Fayazfar, Abdollah Afshar, Abolghasem Dolati
• Citations: 21 (Details)

• Acoustic Emission Characterization of Matrix Damage Initiation in Woven CFRP Composites, Materials Sciences and Applications, Vol.4 No.9, 2013
• Mostefa Bourchak, Adnan Khan, Salah A. Badr, Wail Harasani
• Citations: 21 (Details)

• Equilibrium State of Anatase to Rutile Transformation for Titanium Dioxide Film Prepared by Ultrasonic Spray Pyrolysis Technique, Materials Sciences and Applications, Vol.2 No.6, 2011
• Ghassem Kavei, Auppatham Nakaruk, Charles Chris Sorrell
• Citations: 21 (Details)

• Optical Absorption of Nano-Composite Thin Films of Au in Teflon, Materials Sciences and Applications, Vol.1 No.3, 2010
• Dmytro Grynko, Konstantin Grytrsenko, Valeri Lozovski, Mykola Sopinskyy, Galyna Strilchuk
• Citations: 21 (Details)

• Electrical Transport Properties of Bi₂O₃-Doped CoFe₂O₄ and CoHo_0.02Fe_1.98O₄ Ferrites, Materials Sciences and Applications, Vol.2 No.8, 2011
• Hasan Mehmood Khan, Misbah-ul Islam, Irshad Ali, Mazhar-ud-din Rana
• Citations: 21 (Details)

• Alignment of Vertically Grown Carbon Nanostructures Studied by X-Ray Absorption Spectroscopy, Materials Sciences and Applications, Vol.5 No.13, 2014
• Jeannot Mane Mane, François Le Normand, Rolant Eba Medjo, Costel Sorin Cojocaru, Ovidiu Ersen, Antoine Senger, Carine Laffon, Bridinette Thiodjio Sendja, César Mbane Biouele, Germain Hubert Ben-Bolie, Pierre Owono Ateba, Philippe Parent
• Citations: 21 (Details)

• Fatigue Limit Prediction and Estimation for the Crack Size Rendered Harmless by Peening for Welded Joint Containing a Surface Crack, Materials Sciences and Applications, Vol.6 No.6, 2015
• Ryutaro Fueki, Koji Takahashi, Keiji Houjou
• Citations: 21 (Details)

• Macrosegregation Quality Criteria and Mechanical Soft Reduction for Central Quality Problems in Continuous Casting of Steel, Materials Sciences and Applications, Vol.5 No.10, 2014
• Mostafa Omar El-Bealy
• Citations: 20 (Details)

• Electrical, Thermal and Mechanical Properties of CNT Treated Prepreg CFRP Composites, Materials Sciences and Applications, Vol.7 No.9, 2016
• Yelda Akcin, Sukru Karakaya, Omer Soykasap
• Citations: 20 (Details)

• Corrosion Inhibition of Amino Pentadecylphenols (APPs) Derived from Cashew Nut Shell Liquid on Mild Steel in Acidic Medium, Materials Sciences and Applications, Vol.7 No.8, 2016
• Joseph Yoeza Naimani Philip, Joseph Buchweshaija, Alinanuswe Mwakalesi
• Citations: 20 (Details)

• Collagen-Based Fuel Cell and Its Proton Transfer, Materials Sciences and Applications, Vol.8 No.11, 2017
• Yasumitsu Matsuo, Hiroki Ikeda, Takashi Kawabata, Junko Hatori, Hiroshi Oyama
• Citations: 20 (Details)

• Spray Pyrolysis Deposition of Single and Mixed Oxide Thin Films, Materials Sciences and Applications, Vol.8 No.2, 2017
• Olusegun J. Ilegbusi, S. M. Navid Khatami, Leonid I. Trakhtenberg
• Citations: 20 (Details)

• Chitin Based Fuel Cell and Its Proton Conductivity, Materials Sciences and Applications, Vol.9 No.10, 2018
• Takashi Kawabata, Yasumitsu Matsuo
• Citations: 20 (Details)

• Hot Forging and Hot Pressing of AlSi Powder Compared to Conventional Powder Metallurgy Route, Materials Sciences and Applications, Vol.2 No.8, 2011
• Sayed Moustafa, Walid Daoush, Ahmed Ibrahim, Erich Neubaur
• Citations: 20 (Details)

• Synthesis and Characterization of Sb₆₅Se_35-xGe_x Alloys, Materials Sciences and Applications, Vol.2 No.7, 2011
• Saleh Ahmed Saleh
• Citations: 20 (Details)

• Fatigue Failure of Notched Specimen—A Strain-Life Approach, Materials Sciences and Applications, Vol.2 No.12, 2011
• Bikash Joadder, Jagabandhu Shit, Sanjib Acharyya, Sankar Dhar
• Citations: 20 (Details)

• Analysis of Carbon Nanotubes Produced by Pyrolysis of Composite Film of Poly (Vinyl Alcohol) and Modified Fly Ash, Materials Sciences and Applications, Vol.3 No.2, 2012
• Dilip C. D. Nath, Veena Sahajwalla
• Citations: 20 (Details)

• Analysis of Density of Sintered Iron Powder Component Using the Response Surface Method, Materials Sciences and Applications, Vol.1 No.3, 2010
• Prasanta Kumar Bardhan, Suprs Patra, Goutam Sutradhar
• Citations: 20 (Details)

• Electrical Conductivity, Magnetoconductivity and Dielectric Behaviour of (Mg,Ni)-Ferrite below Room Temperature, Materials Sciences and Applications, Vol.1 No.4, 2010
• Somenath Ghatak, Ajit Kumar Meikap, Manika Sinha, Swapan Kumar Pradhan
• Citations: 20 (Details)

• New Family of Functionalized Monomers Based on Amines: A Novel Synthesis that Exploits the Nucleophilic Substitution Reaction, Materials Sciences and Applications, Vol.1 No.3, 2010
• Lissette Agüero, Luis G. Guerrero-Ramírez, Issa Katime
• Citations: 20 (Details)

• Structure and Electrical Properties of Oxide Doped Rhombohedral Pb(Ni1/3Nb2/3)O3-PbTiO3 Ferroelectric Ceramics, Materials Sciences and Applications, Vol.1 No.2, 2010
• Bijun Fang, Dun Wu, Qingbo Du, Limin Zhou, Yongyong Yan
• Citations: 20 (Details)

• The Effect of Annealing Treatments on Spherulitic Morphology and Physical Ageing on Glass Transition of Poly Lactic Acid (PLLA), Materials Sciences and Applications, Vol.2 No.5, 2011
• El-Hadi Ahmed Mohamed
• Citations: 20 (Details)

• Hexagonal Nano-Crystalline BCN Films Grown on Si (100) Substrate Studied by X-Ray Absorption Spectroscopy, Materials Sciences and Applications, Vol.4 No.5A, 2013
• Md. Abdul Mannan, Yuji Baba, Norie Hirao, Tetsuya Kida, Masamitsu Nagano, Hideyuki Noguchi
• Citations: 20 (Details)

• Design and Development of Anti-Icing Aluminum Surface, Materials Sciences and Applications, Vol.4 No.6, 2013
• Yongxin Wang, Daniel Orol, Jeffery Owens, Katherine Simpson, Hoon Joo Lee
• Citations: 20 (Details)

• Structure and Microhardness of Steel Samples after Pulse Plasma Flows Processing, Materials Sciences and Applications, Vol.4 No.7B, 2013
• Anuar Zhukeshov, Asylgul Gabdullina, Assem Amrenova, Svetlana Pak
• Citations: 20 (Details)

• Physical Properties of the Zn_xCd_1-x Se Alloys: Ab-Initio Method, Materials Sciences and Applications, Vol.3 No.11, 2012
• Mohammed Ameri, Meriem Fodil, Fatma Z. Aoumeur-Benkabou, Zoubir Mahdjoub, Fatima Boufadi, Ali Bentouaf
• Citations: 20 (Details)

• Development of Nanostructured Antireflection Coatings for EO/IR Sensor and Solar Cell Applications, Materials Sciences and Applications, Vol.3 No.9, 2012
• Ashok K. Sood, Adam W. Sood, Roger E. Welser, Gopal G. Pethuraja, Yash R. Puri, Xing Yan, David J. Poxson, Jaehee Cho, E. Fred Schubert, Nibir K. Dhar, Dennis L. Polla, Pradeep Haldar, Jennifer L. Harvey
• Citations: 20 (Details)

• Capacitive Properties of Mesoporous Mn-Co Oxide Derived from a Mixed Oxalate, Materials Sciences and Applications, Vol.3 No.6, 2012
• Yong Yan, Bingcai Wu, Cuihong Zheng, Daolai Fang
• Citations: 20 (Details)

• Property and Activity of Molybdates Dispersed on Silica Obtained from Various Synthetic Procedures, Materials Sciences and Applications, Vol.3 No.4, 2012
• Antonella Gervasini, Laura Wahba, Manuel Dario Finol, Jean-François Lamonier
• Citations: 19 (Details)

• Effect of Surface Treatment on Elemental Composition of Recast NiCr Alloy, Materials Sciences and Applications, Vol.3 No.3, 2012
• Tevfik Yavuz, Aslı Acar, Serhan Akman, Atiye Nilgun Ozturk
• Citations: 19 (Details)

• Thermoelectric Performance of Micro/Nano-Structured Bismuth-Antimony-Telluride Bulk from Low Cost Mechanical Alloying, Materials Sciences and Applications, Vol.3 No.12, 2012
• Z. Li, G. L. Zhao, P. Zhang, S. Guo, J. Tang
• Citations: 19 (Details)

• Magnetooptical Properties of Layer-by-Layer Deposited Ferromagnet—Dielectric Nanocomposites, Materials Sciences and Applications, Vol.4 No.4A, 2013
• Viktoria Evgenèvna Buravtsova, Elena Alexandrovna Ganshina, Sergey Alexandrovich Kirov, Yuriy Egorovich Kalinin, Alexandr Viktorovich Sitnikov
• Citations: 19 (Details)

• Determination of Residual Stresses Numerically Obtained in ASTM AH36 Steel Welded by TIG Process, Materials Sciences and Applications, Vol.4 No.4, 2013
• Pablo Batista Guimarães, Paulo Marcelo Almeida Pedrosa, Yogendra Prasad Yadava, José Maria Andrade Barbosa, Aníbal Veras Siqueira Filho, Ricardo Artur Sanguinetti Ferreira
• Citations: 19 (Details)

• Electrically-Conductive Composite Nanomaterial with Multi-Walled Carbon Nanotubes, Materials Sciences and Applications, Vol.4 No.5A, 2013
• Levan Ichkitidze, Vitally Podgaetsky, Sergei Selishchev, Eugenie Blagov, Vyacheslav Galperin, Yuri Shaman, Alexander Pavlov, Eugenie Kitsyuk
• Citations: 19 (Details)

• Bandwidth Enhancement of RMPA Using 2 Segment Labyrinth Metamaterial at THz, Materials Sciences and Applications, Vol.4 No.10, 2013
• Parul Dawar, Asok De
• Citations: 19 (Details)

• Synthesis of Mesoporous Material from Chrysotile-Derived Silica, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Anderson Joel Schwanke, Christian Wittee Lopes, Sibele Berenice Castellã Pergher
• Citations: 19 (Details)

• Effect of Magnetic Field on the Friction and Wear of Polyamide Sliding against Steel, Materials Sciences and Applications, Vol.5 No.1, 2014
• G. T. Abdel-Jaber, M. K. Mohamed, W. Y. Ali
• Citations: 19 (Details)

• Efficacy of Aluminum Hydroxides as Inhibitors of Alkali-Silica Reactions, Materials Sciences and Applications, Vol.4 No.12A, 2013
• Alexey Brykov, Anna Anisimova
• Citations: 19 (Details)

• Effectiveness of Compatibilizer on Mechanical Properties of Recycled PET Blends with PE, PP, and PS, Materials Sciences and Applications, Vol.5 No.8, 2014
• Nobuyuki Imamura, Hiroki Sakamoto, Yuji Higuchi, Hiroyuki Yamamoto, Shinichi Kawasaki, Kazushi Yamada, Hiroyuki Nishimura, Takahiro Nishino
• Citations: 19 (Details)

• Enhanced Methane Sorption in Densified Forms of a Porous Polymer Network, Materials Sciences and Applications, Vol.5 No.6, 2014
• Austin C. Kizzie, Anne Dailly, Lamar Perry, Marty A. Lail, Weigang Lu, Thomas O. Nelson, Mei Cai, Hong-Cai Zhou
• Citations: 19 (Details)

• Synthesis of Silver Nanoparticles Using Albumin as a Reducing Agent, Materials Sciences and Applications, Vol.2 No.6, 2011
• J.E Morales-Sánchez, jesus Guajardo-Pacheco, María-Eugenia Noriega, Quintero Cristina, Morales Elpidio Compeán-Jasso, J González-Hernández, Ruiz Facundo
• Citations: 19 (Details)

• Molar Binding Energy of Zigzag and Armchair Single-Walled Boron Nitride Nanotubes, Materials Sciences and Applications, Vol.1 No.4, 2010
• Levan Chkhartishvili, Ivane Murusidze
• Citations: 19 (Details)

• Predictions of Storage Modulus of Glass Bead-Filled Low-Density-Polyethylene Composites, Materials Sciences and Applications, Vol.1 No.6, 2010
• Ji-Zhao Liang
• Citations: 19 (Details)

• The Role of Magnesium in Superalloys—A Review, Materials Sciences and Applications, Vol.2 No.9, 2011
• Kumkum Banerjee
• Citations: 19 (Details)

• On the Electrical and Thermal Conductivities of Cast A356/Al₂O₃ Metal Matrix Nanocomposites, Materials Sciences and Applications, Vol.2 No.9, 2011
• El-Sayed Youssef El-Kady, Tamer Samir Mahmoud, Ali Abdel-Aziz Ali
• Citations: 19 (Details)

• Anodic Coating Characteristics of Different Aluminum Alloys for Spacecraft Materials Applications, Materials Sciences and Applications, Vol.8 No.2, 2017
• Afaf M. Abd El-Hameed, Yehia A. Abdel-Aziz, Fatma S. El-Tokhy
• Citations: 19 (Details)

• Mechanical Activation of Chemical Process, Materials Sciences and Applications, Vol.6 No.1, 2015
• Czesław Kajdas
• Citations: 19 (Details)

• The Effect of the Light Intensity and Light Distances of LED and QTH Curing Devices on the Hardness of Two Light-Cured Nano-Resin Composites, Materials Sciences and Applications, Vol.6 No.11, 2015
• Pnina Segal, Diva Lugassy, Eitan Mijiritsky, Michal Dekel, Ariel Ben-Amar, Zeev Ormianer, Shlomo Matalon
• Citations: 19 (Details)

• Hydration of Portland Cement in the Presence of Highly Reactive Metakaolin, Materials Sciences and Applications, Vol.6 No.5, 2015
• Alexey Brykov, Svetlana Krasnobaeva, Maxim Mokeev
• Citations: 18 (Details)

• Investigation of Different Pre-Treated Multi-Walled Carbon Nanotubes by Raman Spectroscopy, Materials Sciences and Applications, Vol.8 No.8, 2017
• Pascal Düngen, Marina Prenzel, Casey Van Stappen, Norbert Pfänder, Saskia Heumann, Robert Schlögl
• Citations: 18 (Details)

• Ferrimagnetism and Ferroelectricity of the Composite Matrix: SrBi₂Nb₂O₉(SBN)_X-BaFe₁₂0₁₉(BFO)_100–X, Materials Sciences and Applications, Vol.3 No.1, 2012
• M. J. S. Rocha, M. C. C. Filho, K. R. B. Theophilo, J. C. Denardin, I. F. Vasconcelos, E. B. Araújo, A. S. B. Sombra
• Citations: 18 (Details)

• Microstructural and Mechanical Characterization after Thermomechanical Treatments in 6063 Aluminum Alloy, Materials Sciences and Applications, Vol.2 No.11, 2011
• Waldemar A. Monteiro, Iara M. Espósito, Ricardo B. Ferrari, Sidnei J. Buso
• Citations: 18 (Details)

• Carbon Nanotube Addition to Simultaneously Enhance Strength and Ductility of Hybrid AZ31/AA5083 Alloy, Materials Sciences and Applications, Vol.2 No.1, 2011
• Muralidharan Paramsothy, Manoj Gupta, Jimmy Chan, Richard Kwok
• Citations: 18 (Details)

• Magnetic Barkhausen Noise Profile Analysis: Effect of Excitation Field Strength and Detection Coil Sensitivity in Case Carburized Steel, Materials Sciences and Applications, Vol.5 No.5, 2014
• Mohamed Mehemed Blaow, Brian A. Shaw
• Citations: 18 (Details)

• Electronic Properties of Nanopore Edges of Ferromagnetic Graphene Nanomeshes at High Carrier Densities under Ionic-Liquid Gating, Materials Sciences and Applications, Vol.5 No.1, 2014
• Taijyu Hashimoto, Syota Kamikawa, Yuko Yagi, Junji Haruyama
• Citations: 18 (Details)

• Study on Chitosan-Lactate Sponges with Oriented Pores as Potential Wound Dressing, Materials Sciences and Applications, Vol.4 No.8, 2013
• Chen Lai, Yi Chen, Shujiang Zhang
• Citations: 18 (Details)

• Removal of 17β-Estradiol by Electro-Fenton Process, Materials Sciences and Applications, Vol.3 No.12, 2012
• I. Naimi, N. Bellakhal
• Citations: 18 (Details)

• New Nanocrystalline Matrix Materials for Sintered Diamond Tools, Materials Sciences and Applications, Vol.3 No.11, 2012
• Janusz Konstanty, Andrzej Romanski
• Citations: 18 (Details)

• Use of Perovskite-Type Lanthanum Nickelate Synthesized by the Polymeric Precursor Method in the Steam Reforming Reaction of Methane, Materials Sciences and Applications, Vol.3 No.6, 2012
• Daniele M. H. Martinelli, Dulce M. A. Melo, Anne M. Garrido Pedrosa, Antonio E. Martinelli, Marcus A. de F. Melo, Mary K. S. Batista, Roberto C. Bitencourt
• Citations: 17 (Details)

• Development of Niobium Oxide Coatings on Sand-Blasted Titanium Alloy Dental Implants, Materials Sciences and Applications, Vol.3 No.5, 2012
• Allen C. Mackey, Robert L. Karlinsey, Tien-Mien G. Chu, Meoghan MacPherson, Daniel L. Alge
• Citations: 17 (Details)

• Poly(Vinyl Alcohol)-Infiltrated Carbon Nanotube Carpets, Materials Sciences and Applications, Vol.3 No.9, 2012
• Konstantinos G. Dassios
• Citations: 17 (Details)

• Interlaminar Fracture Toughness of Epoxy Glass Fiber Fly Ash Laminate Composite, Materials Sciences and Applications, Vol.5 No.4, 2014
• Ajit Bhandakkar, Niraj Kumar, R. C. Prasad, Shankar M. L. Sastry
• Citations: 17 (Details)

• Electrocatalytic Reduction of Oxygen at Perovskite (BSCF)-MWCNT Composite Electrodes, Materials Sciences and Applications, Vol.5 No.4, 2014
• Farhanini Yusoff, Norita Mohamed, Azizan Aziz, Sulaiman Ab Ghani
• Citations: 17 (Details)

• Zinc Oxide Nanorods Prepared in Mixed Solvents, Materials Sciences and Applications, Vol.1 No.2, 2010
• Mohammad Ashraf Shah, Fahad M. Al-Marzouki
• Citations: 17 (Details)

• Structural and Electrical Characteristics of Ba(Fe_0.5Nb_0.5)O₃-SrTiO₃ Ceramic System, Materials Sciences and Applications, Vol.2 No.11, 2011
• Narendra Kumar Singh, Pritam Kumar, Ajay Kumar Sharma, Ram Naresh Prasad Choudhary
• Citations: 17 (Details)

• A Novel and Simple Route to Synthesis Nanocrystalline Titanium Carbide Via the Reaction of Titanium Dioxide and Different Carbon Source, Materials Sciences and Applications, Vol.2 No.11, 2011
• Youjian Chen, Yongyong Deng, Hong Zhang, Lihua Wang, Jianhua Ma
• Citations: 17 (Details)

• Fluoride Adsorption onto Acid-Treated Diatomaceous Mineral from Kenya, Materials Sciences and Applications, Vol.2 No.11, 2011
• Enos W. Wambu, Charles O. Onindo, Willis J. Ambusso, Gerald K. Muthakia
• Citations: 17 (Details)

• Efficient Thermal Stabilization of Polyvinyl Chloride with Tannin-Ca Complex as Bio-Based Thermal Stabilizer, Materials Sciences and Applications, Vol.6 No.5, 2015
• Hussein A. Shnawa, Moayad N. Khalaf, Yousef Jahani, Abed Alameer H. Taobi
• Citations: 17 (Details)

• Characteristics of Yarn and Fabric Made out of Nanofibers, Materials Sciences and Applications, Vol.6 No.1, 2015
• S. A. Hosseini Ravandi, R. Bayat Tork, F. Dabirian, A. A. Gharehaghaji, A. Sajjadi
• Citations: 17 (Details)

• Optimization and Modeling of Antireflective Layers for Silicon Solar Cells: In Search of Optimal Materials, Materials Sciences and Applications, Vol.9 No.8, 2018
• Mamadou Moustapha Diop, Alassane Diaw, Nacire Mbengue, Ousmane Ba, Moulaye Diagne, Oumar A. Niasse, Bassirou Ba, Joseph Sarr
• Citations: 17 (Details)

• The Hardness and Corrosion Properties of Trivalent Chromium Hard Chromium, Materials Sciences and Applications, Vol.8 No.13, 2017
• Jiazhu Li, Yanjing Li, Xiaohua Tian, Ling Zou, Xing Zhao, Sanfeng Wang, Shenggang Wang
• Citations: 16 (Details)

• Measurements of the Thermophysical Properties of the API 5L X80, Materials Sciences and Applications, Vol.5 No.8, 2014
• Tiago de Sousa Antonino, Pablo Batista Guimarães, Roberto de Araújo Alécio, Yogendra Prasad Yadava, Ricardo Artur Sanguinetti Ferreira
• Citations: 16 (Details)

• Energy Absorption of Pultruded Hybrid GlassGraphite Epoxy Composites under High Strain-Rate SHPB Compression Loading, Materials Sciences and Applications, Vol.6 No.6, 2015
• Seyed Soheil Daryadel, Cameron Ray, Tejas Pandya, P. Raju Mantena
• Citations: 16 (Details)

• XRD Characterization of Crystallinity of Human Tooth Enamel under Influence of Mechanical Grinding, Materials Sciences and Applications, Vol.6 No.6, 2015
• Jose Reyes-Gasga, Olga Koudriavtseva, Raul Herrera-Becerra, Arturo Escobosa
• Citations: 16 (Details)

• Photoluminescence Studies of ZnO, ZnO:Eu and ZnO:Eu Nanoparticles Covered with Y₂O₃ Matrix, Materials Sciences and Applications, Vol.6 No.4, 2015
• Laishram Robindro Singh
• Citations: 16 (Details)

• Effect of Aqueous Extracts of Salvadora persica “Miswak” on the Acid Eroded Enamel Surface at Nano-Mechanical Scale, Materials Sciences and Applications, Vol.7 No.11, 2016
• Tahani M. Bawazeer, Mohammad S. Alsoufi, Dina Katowah, Waad S. Alharbi
• Citations: 16 (Details)

• Effect of Catharanthus roseus (Vince rosea) and Turmeric (Curcuma longa) Extracts as Green Corrosion Inhibitors for Mild Steel in 1 M HCl, Materials Sciences and Applications, Vol.7 No.10, 2016
• Rabab Mohamed Abou Shahba, Abd El-Aziz El-Sayed Fouda, Azza El-Sayed El-Shenawy, Amina Salah Mohamed Osman
• Citations: 16 (Details)

• Composite Materials Damage Modeling Based on Dielectric Properties, Materials Sciences and Applications, Vol.6 No.11, 2015
• Rassel Raihan, Fazle Rabbi, Vamsee Vadlamudi, Kenneth Reifsnider
• Citations: 16 (Details)

• 8 MeV Electron Induced Changes in Structural and Thermal Properties of Lexan Polycarbonate, Materials Sciences and Applications, Vol.2 No.11, 2011
• K. Hareesh, Ganesh Sanjeev
• Citations: 16 (Details)

• Influence of Sintering Temperature on Densification, Structure and Microstructure of Li and Sb Co-Modified (K,Na)NbO₃-Based Ceramics, Materials Sciences and Applications, Vol.2 No.10, 2011
• Rashmi Rani, Seema Sharma
• Citations: 16 (Details)

• Synthesis of Titanium Phosphates with Additives and Their Powder Properties for Cosmetics, Materials Sciences and Applications, Vol.3 No.1, 2012
• Hiroaki Onoda, Taisuke Yamaguchi
• Citations: 16 (Details)

• A Novel Synthesis of Nanostructured ZnO via Thermal Oxidation of Zn Nanowires Obtained by a Green Route, Materials Sciences and Applications, Vol.1 No.5, 2010
• Adriana Veloso Maciel, Wagner da Nova Mussel, Vânya Márcia Duarte Pasa
• Citations: 16 (Details)

• Effect of Hydroxide Ion Concentration on the Morphology of the Hydroxyapatite Nanorods Synthesized Using Electrophoretic Deposition, Materials Sciences and Applications, Vol.2 No.2, 2011
• Khalil Abdelrazek Khalil, Abdulhakim A. Almajid, Mahmoud S. Soliman
• Citations: 16 (Details)

• Geometrical Modeling of Crystal Structures with Use of Space of Elliptic Riemannian Geometry, Materials Sciences and Applications, Vol.2 No.6, 2011
• Stanislav Rudnev, Boris Semukhin, Andrey Klishin
• Citations: 16 (Details)

• Alloyed CdTe_0.6S_0.4 Quantum Dots Sensitized TiO₂ Electrodes for Photovoltaic Applications, Materials Sciences and Applications, Vol.5 No.1, 2014
• Ali Badawi, Khalid Easawi, Najm Al-Hosiny, Said Abdallah
• Citations: 16 (Details)

• Alternative Binders for Increased Sustainable Construction in Ghana—A Guide for Building Professionals, Materials Sciences and Applications, Vol.4 No.12A, 2013
• Mark Bediako, Augustine Osei Frimpong
• Citations: 15 (Details)

• Improved Cellulose by Ionic Liquid Mixture with Solid Acid Catalysis and Its Application in Polyethylene Glycol Liquefaction, Materials Sciences and Applications, Vol.4 No.12, 2013
• Qiyu Chen, Qingyue Wang, Naoki Mitsumura, Hiroki Niida
• Citations: 15 (Details)

• New Preparation Method of Visible Light Responsive Titanium Dioxide Photocatalytic Films, Materials Sciences and Applications, Vol.5 No.3, 2014
• Kaori Nishizawa, Masahisa Okada, Eiji Watanabe
• Citations: 15 (Details)

• Microwave Sintering of Zn-Nb Doped Barium Hexaferrite Synthesized via Sol-Gel Method, Materials Sciences and Applications, Vol.5 No.4, 2014
• Samikannu Kanagesan, Mansor Hashim, Sinnappan Jesurani, Thirunavukarasu Kalaivani, Ismayadi Ismail
• Citations: 15 (Details)

• Preparation and Characterization of Conductive Cellulosic Fabric by Polymerization of Pyrrole, Materials Sciences and Applications, Vol.4 No.10, 2013
• Jakup Wiener, Mohamed A. Ramadan, Rehab Gomaa, Rehan Abbassi, Ali Hebeish
• Citations: 15 (Details)

• Characteristics of Nanoparticles-Based Chemical Sensors, Materials Sciences and Applications, Vol.3 No.7, 2012
• Jason Stephens, A. K. Batra, James R. Currie
• Citations: 15 (Details)

• Thermal Analysis of the Impact of RT Storage Time on the Strengthening of an Al-Mg-Si Alloy, Materials Sciences and Applications, Vol.3 No.7, 2012
• A. Hayoune
• Citations: 15 (Details)

• Ab Initio Calculations Study of Structural and Electronic Properties of Ternary Alloy Al_xIn_1–xAs, Materials Sciences and Applications, Vol.3 No.10, 2012
• Mohammed Ameri, Fatima Boufadi, Amina Touia, Meriem Faudil, Djelloul Hachemane, Keltouma Boudia, Amel Slamani, Adjadj Aze-Eddine
• Citations: 15 (Details)

• Adsorption of Nickel in Aqueous Solution onto Natural Maghnite, Materials Sciences and Applications, Vol.4 No.2, 2013
• Mohamed Amine Zenasni, Said Benfarhi, André Merlin, Stéphane Molina, Béatrice George, Bahia Meroufel
• Citations: 15 (Details)

• Growth, Microstructure and Electrochemical Properties of RF Sputtered LiMn₂O₄ Thin Films on Au/Polyimide Flexible Substrates, Materials Sciences and Applications, Vol.4 No.2, 2013
• K. Jayanth Babu, P. Jeevan Kumar, Obili M. Hussain
• Citations: 15 (Details)

• Thermal Properties of Se_100–xZn_x Glassy System, Materials Sciences and Applications, Vol.2 No.5, 2011
• Mohd Nasir, Mohd Abdul Majeed Khan, Mushahid Husain, Mohammad Zulfequar
• Citations: 15 (Details)

• Effect of Mn Doping on Solvothermal Synthesis of CdS Nanowires, Materials Sciences and Applications, Vol.1 No.4, 2010
• Zinki Jindal, N. K. Verma
• Citations: 15 (Details)

• Viscoelastic Response of Graphite Platelet and CTBN Reinforced Vinyl Ester Nanocomposites, Materials Sciences and Applications, Vol.2 No.11, 2011
• Brahmananda Pramanik, P. Raju Mantena
• Citations: 15 (Details)

• Cadmium Stannates Synthesis via Thermal Treatment of Coprecipitated Salts, Materials Sciences and Applications, Vol.2 No.9, 2011
• Andrey V. Sidorak, Viktor V. Ivanov, Alexander A. Shubin
• Citations: 15 (Details)

• Synthesis of Cobalt Nano Crystals in Aqueous Media and Its Characterization, Materials Sciences and Applications, Vol.2 No.9, 2011
• Pamela Alex, Sanjib Majumdar, Jugal Kishor, Inderkumar G. Sharma
• Citations: 15 (Details)

• Influence of S Contents on the Hydrogen Blistering and Hydrogen Induced Cracking of A350LF2 Steel, Materials Sciences and Applications, Vol.2 No.7, 2011
• Shu-qi Zheng, Chang-feng Chen, Li-qiang Chen
• Citations: 15 (Details)

• Effects of Synthetic and Processing Methods on Dispersion Characteristics of Nanoclay in Polypropylene Polymer Matrix Composites, Materials Sciences and Applications, Vol.2 No.7, 2011
• Turup Pandurangan Mohan, Krishnan Kanny
• Citations: 15 (Details)

• Dynamic Mechanical and Thermal Behavior Analysis of Composites Based on Polypropylene Recycled with Vegetal Leaves, Materials Sciences and Applications, Vol.7 No.7, 2016
• Cheila Gonçalves Mothé, Daniel Felipe J. Monteiro, Michelle Gonçalves Mothé
• Citations: 15 (Details)

• Fabrication of Copper Wire Using Glyoxylic Acid Copper Complex and Laser Irradiation in Air, Materials Sciences and Applications, Vol.6 No.9, 2015
• Tomoji Ohishi, Ryutaro Kimura
• Citations: 15 (Details)

• The Effect of Silane Treated Sugar Cane Bagasse on Mechanical, Thermal and Crystallization Studies of Recycled Polypropylene, Materials Sciences and Applications, Vol.6 No.8, 2015
• Tshwafo E. Motaung, Linda Z. Linganiso, Maya John, Rajesh D. Anandjiwala
• Citations: 15 (Details)

• Extrusion of Thermoplastic Starch: Effect of “Green” and Common Polyethylene on the Hydrophobicity Characteristics, Materials Sciences and Applications, Vol.5 No.12, 2014
• Muhammad Pervaiz, Philip Oakley, Mohini Sain
• Citations: 15 (Details)

• Recovery of Gold and Silver and Removal of Copper, Zinc and Lead Ions in Pregnant and Barren Cyanide Solutions, Materials Sciences and Applications, Vol.6 No.2, 2015
• Gabriela Figueroa, Jesus L. Valenzuela, Jose R. Parga, Victor Vazquez, Alejandro Valenzuela
• Citations: 15 (Details)

• Mechanical Properties of Uni-Directional Long Bamboo Fiber/Bamboo Powder Composite Materials, Materials Sciences and Applications, Vol.5 No.14, 2014
• Shinji Ochi
• Citations: 15 (Details)

• Mechanical, Thermal and Crystallization Properties of Polypropylene (PP) Reinforced Composites with High Density Polyethylene (HDPE) as Matrix, Materials Sciences and Applications, Vol.9 No.5, 2018
• Harekrushna Sutar, Prakash Chandra Sahoo, Prateekshya Suman Sahu, Surajabala Sahoo, Rabiranjan Murmu, Sumit Swain, Subash Chandra Mishra
• Citations: 15 (Details)

• Fire Self-Extinguishing Cotton Fabric: Development of Piperazine Derivatives Containing Phosphorous-Sulfur-Nitrogen and Their Flame Retardant and Thermal Behaviors, Materials Sciences and Applications, Vol.5 No.11, 2014
• Thach-Mien Nguyen, SeChin Chang, Brian Condon, Jade Smith
• Citations: 14 (Details)

• Effect of Temperature Dependence on Electrical Characterization of p-n GaN Diode Fabricated by RF Magnetron Sputtering, Materials Sciences and Applications, Vol.6 No.9, 2015
• Thi Tran Anh Tuan, Dong-Hau Kuo, Cheng-Che Li, Guan-Zhang Li
• Citations: 14 (Details)

• Factors Inhibiting the Use of Bamboo in Building Construction in Ghana: Perceptions of Construction Professionals, Materials Sciences and Applications, Vol.7 No.2, 2016
• Desmond Opoku, Joshua Ayarkwa, Kofi Agyekum
• Citations: 14 (Details)

• Developing Sustainable High Strength Concrete Mixtures Using Local Materials and Recycled Concrete, Materials Sciences and Applications, Vol.7 No.2, 2016
• Anthony Torres, Alex Burkhart
• Citations: 14 (Details)

• Indentation Creep Behavior and Microstructure of Cu-Ge Ferrites, Materials Sciences and Applications, Vol.2 No.8, 2011
• Hesham Mohaned Zaki, Ali Mohamed Abdel-Daiem, Yahia Ibrahim Swilem, Farid El-Tantawy, Fahad Masoud Al-Marzouki, Ahmed Abdallah Al-Ghamdi, Saleh Al-Heniti, Farag Said Al-Hazmi, Talal Sadaka Al-harbi
• Citations: 14 (Details)

• The Growth Study of Vero Cells in Different Type of Microcarrier, Materials Sciences and Applications, Vol.1 No.5, 2010
• Yusilawati Ahmad Nor, Nurul Hafizah Sulong, Maizirwan Mel, Hamzah Mohd Salleh, Iis Sopyan
• Citations: 14 (Details)

• Chemical Reaction and Crystalline Procedure of Bismuth Titanate Nanoparticles Derived by Metalorganic Decomposition Technique, Materials Sciences and Applications, Vol.1 No.2, 2010
• Weiliang Liu, Xinqiang Wang, Dong Tian, Chenglong Xiao, Zengjiang Wei, Shouhua Chen
• Citations: 14 (Details)

• Effects of Fillerwire Composition along with Different Pre- and Post-Heat Treatment on Mechanical Properties of AISI 4130 Welded by the GTAW Process, Materials Sciences and Applications, Vol.1 No.3, 2010
• Ali Emamian, Ardalan Emamian, Amir Hossein Kowkabi
• Citations: 14 (Details)

• Synthesis of TiO₂/Al-MCM-41 Composites with Coal-Measure Kaolin and Performance in Its Photocatalysis, Materials Sciences and Applications, Vol.2 No.1, 2011
• Qisheng Wu, Shuiping Li
• Citations: 14 (Details)

• Surfactant-Free Production of Ni-Based Nanostructures, Materials Sciences and Applications, Vol.2 No.5, 2011
• Yaser Bahari Mollamahaleh, Davood Hosseini, Mehdi Mazaheri, Sayed Khatiboleslam Sadrnezhaad
• Citations: 14 (Details)

• Structural and Electrical Characterization of Sintered Silicon Nitride Ceramic, Materials Sciences and Applications, Vol.2 No.7, 2011
• Imran Khan, M. Zulfequar
• Citations: 14 (Details)

• Influence of Hot Band Annealing and Cold Rolling on Texture and Ridging of 430 Stainless Steel Containing Aluminum, Materials Sciences and Applications, Vol.4 No.1, 2013
• Sudipta Patra, Lokesh Kumar Singhal
• Citations: 14 (Details)

• XANES and XPS Study on Microstructure of Mn-Doped ZnO Films, Materials Sciences and Applications, Vol.4 No.5, 2013
• B. Zhang, M. Li, J. Z. Wang, L. Q. Shi, H. S. Cheng
• Citations: 14 (Details)

• Direct Decomposition of NO into N₂ and O₂ Over C-type Cubic Y₂O₃-Tb₄O₇-ZrO₂, Materials Sciences and Applications, Vol.3 No.10, 2012
• Toshiyuki Masui, Shunji Uejima, Soichiro Tsujimoto, Nobuhito Imanaka
• Citations: 14 (Details)

• Fatigue Crack Growth on Double Butt Weld with Toe Crack of Pipelines Steel, Materials Sciences and Applications, Vol.3 No.9, 2012
• Féthi Hadjoui, Mustapha Benachour, Mohamed Benguediab
• Citations: 14 (Details)

• Microstructures and Photovoltaic Properties of Polysilane/C₆₀-Based Solar Cells, Materials Sciences and Applications, Vol.3 No.8, 2012
• Atsushi Kawashima, Takeo Oku, Atsushi Suzuki, Kenji Kikuchi, Shiomi Kikuchi
• Citations: 14 (Details)

• A Model for the Characterization and Selection of Beeswaxes for Use as Base Substitute Tissue in Photon Teletherapy, Materials Sciences and Applications, Vol.3 No.4, 2012
• Rogério Matias Vidal, Divanízia do Nascimento Souza
• Citations: 14 (Details)

• Interactions between Superplasticizer and Release Agents at the Concrete/Formwork Interface, Materials Sciences and Applications, Vol.3 No.6, 2012
• Samir Bouharoun, Yannick Vanhove, Chafika Djelal, Pascale De Caro, Isabelle Dubois
• Citations: 14 (Details)

• The Effect of Functionally Graded Materials into the Sandwich Beam Dynamic Performance, Materials Sciences and Applications, Vol.4 No.11, 2013
• Saber A. Rabboh, Nadia E. Bondok, Tamer S. Mahmoud, Heba I. El Kholy
• Citations: 14 (Details)

• Fabrication of Congo Red/Oxidized Porous Silicon (CR/OPS) pH-Sensors, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Abdel-Hady Kashyout, Hesham M. A. Soliman, Marwa Nabil, Ahmed A. Bishara
• Citations: 14 (Details)

• Effects of Vanadium Content on Structure and Chemical State of TiVN Films Prepared by Reactive DC Magnetron Co-Sputtering, Materials Sciences and Applications, Vol.4 No.9, 2013
• Teerawit Deeleard, Surasing Chaiyakun, Artorn Pokaipisit, Pichet Limsuwan
• Citations: 14 (Details)

• Study on the Structure of Peroxide Cross-Linked Polyethylene Pipes with Several Stabilizers, Materials Sciences and Applications, Vol.4 No.9, 2013
• Hideo Hirabayashi, Akinori Iguchi, Kazushi Yamada, Hiroyuki Nishimura, Kazuhisa Ikawa, Hidekazu Honma
• Citations: 14 (Details)

• The Mitigation of Alkali-Silica Reactions by Aluminum-Bearing Substances, Materials Sciences and Applications, Vol.5 No.6, 2014
• Alexey Brykov, Anna Anisimova, Natalia Rozenkova
• Citations: 14 (Details)

• Osmium-Polymer Modified Carbon Nanotube Paste Electrode for Detection of Sucrose and Fructose, Materials Sciences and Applications, Vol.4 No.7B, 2013
• Riccarda Antiochia, Federico Tasca, Luisa Mannina
• Citations: 13 (Details)

• Effect of Thermoplastic Incorporation on the Performance of Thermosetting Matrix, Materials Sciences and Applications, Vol.3 No.7, 2012
• R. Ollier, A. Stocchi, E. Rodriguez, V. Alvarez
• Citations: 13 (Details)

• Future Semiconductor Devices for Multi-Valued Logic Circuit Design, Materials Sciences and Applications, Vol.3 No.11, 2012
• Supriya Karmakar, Faquir C. Jain
• Citations: 13 (Details)

• Electrospark Coatings Based on WC-Co Alloys with Aluminium Oxide and Carbon Additives, Materials Sciences and Applications, Vol.4 No.3, 2013
• Sergey A. Pyachin, Sergey V. Nikolenko, Alexander A. Burkov, Nikolay A. Suy
• Citations: 13 (Details)

• Development of Hydrogel Polyelectrolyte Membranes with Fixed Sulpho-Groups via Radical Copolymerization of Acrylic Monomers, Materials Sciences and Applications, Vol.2 No.4, 2011
• Ivan A. Stadniy, Viktoriia V. Konovalova, Yuriy M. Samchenko, Ganna A. Pobigay, Anatoliy F. Burban, Zoya R. Ulberg
• Citations: 13 (Details)

• Influence of Ni and Cr Content on Corrosion Resistance of Ni-Cr-Mo Alloys for Fixed Dental Prostheses in 0.05% NaF Aqueous Solution, Materials Sciences and Applications, Vol.1 No.6, 2010
• Nilo A. S. Sampaio, José W. J. Silva, Heloisa A. Acciari, Roberto Z. Nakazato, Eduardo N. Codaro, Hamilton de Felipe
• Citations: 13 (Details)

• Crystallinity, Microstructure and Mechanical Strength of Yttria-Stabilized Tetragonal Zirconia Ceramics for Optical Ferrule, Materials Sciences and Applications, Vol.2 No.1, 2011
• Sung-Dai Kim, Kyu-Seog Hwang
• Citations: 13 (Details)

• Nonequilibrium Diffusion of Boron in SiC at Low Temperatures, Materials Sciences and Applications, Vol.1 No.2, 2010
• Iikham G. Atabaev, Tojiddin M. Saliev, Erkin N. Bakhranov, Dilmurad Saidov, Khimmatali Juraev, Chin C. Tin, Victor Adedeji, Bakhtiyar G. Atabaev, Nilufar G. Saidkhanova
• Citations: 13 (Details)

• Spectral Properties and Parameters Calculation of Er:Ligdf₄ Crystal, Materials Sciences and Applications, Vol.2 No.8, 2011
• Chun Li, Ying Zhang, Xuejian Zhang, Dongwei Miao, Hai Lin, Mauro. Tonelli, Fanming Zeng, Jinghe Liu
• Citations: 13 (Details)

• Optical Microscopy as a Tool to Correlate Morphology and Thermal Properties of Extruded PET/PC Reactive Blends, Materials Sciences and Applications, Vol.2 No.8, 2011
• Luis Claudio Mendes, Patricia Soares da Costa Pereira
• Citations: 13 (Details)

• The Inhibitive Effect of 3-Methyl 4-Amino 1,2,4 Triazole on the Corrosion of Copper-Nickel 70 - 30 in NaCl 3% Solution, Materials Sciences and Applications, Vol.2 No.9, 2011
• Tayeb Chieb, Kamel Belmokre, Mohammed Benmessaoud, Sidi El Hassane Drissi, Najat Hajjaji, Abdellah Srhiri
• Citations: 13 (Details)

• DC Conductivity and Spectroscopic Characterization of Poly (o-toluidine) Doped with Binary Dopant ZrOCl₂/AgI, Materials Sciences and Applications, Vol.2 No.8, 2011
• Kiran Kumari, Vazid Ali, Gita Rani, Sushil Kumar, G.B.V.S. Lakshmi, M. Zulfequar
• Citations: 13 (Details)

• An Experimental Study of the Physicochemical Properties of a Cement Matrix Containing Dredged Materials, Materials Sciences and Applications, Vol.2 No.7, 2011
• Hongseob Oh, Juwon Lee, N. Banthia, S. Talukdar
• Citations: 13 (Details)

• A Comparative Study of Bisphenol-A, Hydantoin and Cyanuric Acid Based Epoxy Resins Using XRD, Materials Sciences and Applications, Vol.2 No.10, 2011
• Sanjay Swarup
• Citations: 13 (Details)

• Synthesis and Pigmental Properties of Nickel Phosphates by the Substitution with Tetravalent Cerium Cation, Materials Sciences and Applications, Vol.2 No.11, 2011
• Hiroaki Onoda, Takeshi Sakumura
• Citations: 13 (Details)

• Synthesis of Fluorite-Type Nanopowders by Citrate-Nitrate Auto-Combustion Process: A Systematic Approach, Materials Sciences and Applications, Vol.3 No.2, 2012
• Mridula Biswas, Prasanta Kumar Ojha, Chadalapaka Durga Prasad, Nitin Madhusudan Gokhale, Suresh Chandra Sharma
• Citations: 13 (Details)

• Natural Rubber Based Composites Comprising Different Types of Carbon-Silica Hybrid Fillers. Comparative Study on Their Electric, Dielectric and Microwave Properties, and Possible Applications, Materials Sciences and Applications, Vol.7 No.6, 2016
• Ahmed A. Al-Ghamdi, Omar A. Al-Hartomy, Falleh R. Al-Solamy, Nikolay Dishovsky, Mihail Mihaylov, Petrunka Malinova, Nikolay Atanasov
• Citations: 13 (Details)

• Evaluation of Nevirapine Release Kinetics from Polycaprolactone Hybrids, Materials Sciences and Applications, Vol.7 No.11, 2016
• Mariana S. S. B. Monteiro, Jackeline Lunz, Pedro J. Sebastião, Maria Inês Bruno Tavares
• Citations: 13 (Details)

• ND:YAG Laser Pulses Ablation Threshold of Stainless Steel 304, Materials Sciences and Applications, Vol.6 No.7, 2015
• Mitra Radmanesh, Amirkianoosh Kiani
• Citations: 13 (Details)

• Investigating the Preparation Conditions on Superconducting Properties of Bi_2-x Li_xPb_0.3Sr₂Ca₂Cu₃O_10+δ, Materials Sciences and Applications, Vol.6 No.4, 2015
• Muna Musa Abbas, Saad Frhan Oboudi, Nadein Qahtan Raoof
• Citations: 13 (Details)

• Mechanical Behaviour Modelling of an Mg-Stabilized Zirconia Reinforced TRIP-Matrix-Composite under Cold Working Conditions, Materials Sciences and Applications, Vol.5 No.11, 2014
• Sergey Guk, Wolfhart Müller, Katja Pranke, Rudolf Kawalla
• Citations: 13 (Details)

• Comparing Design Void Content with Actual Void Content of Laboratory Prepared Pervious Concrete, Materials Sciences and Applications, Vol.9 No.7, 2018
• Anthony Torres, Cristián Gaedicke, Jiong Hu, Rupesh Bejugam, Sarah McMasters
• Citations: 13 (Details)

• Hydrothermal Synthesis and Electrochemical Performance of Amorphous SiO₂ Nanospheres/Graphene Composites, Materials Sciences and Applications, Vol.8 No.13, 2017
• Youwen Yang, Yuanhao Gao, Jiguang Liu, Xiaogang Fang
• Citations: 13 (Details)

• Carbon Fibre Reinforced Concrete: Dependency of Bond Strength on T_g of Yarn Impregnating Polymer, Materials Sciences and Applications, Vol.10 No.4, 2019
• Iris Kruppke, Marko Butler, Kai Schneider, Rolf-Dieter Hund, Viktor Mechtcherine, Chokri Cherif
• Citations: 13 (Details)

• Study of the Physical, Mechanical and Thermal Properties of Banana Fiber Reinforced HDPE Composites, Materials Sciences and Applications, Vol.11 No.4, 2020
• Budrun Neher, Rakib Hossain, Kaniz Fatima, M. A. Gafur, Md. Abul Hossain, Farid Ahmed
• Citations: 12 (Details)

• Polymer Nanocomposites Used as Scaffolds for Bone Tissue Regeneration, Materials Sciences and Applications, Vol.9 No.8, 2018
• Raquel Couto de Azevedo Gonçalves Mota, Emerson Oliveira da Silva, Lívia Rodrigues de Menezes
• Citations: 12 (Details)

• Study of the Crystallographic and Magnetic Structure in the Nickel Substituted Cobalt Ferrites by Neutron Diffraction, Materials Sciences and Applications, Vol.6 No.4, 2015
• Sadia Khanam, A. K. M. Zakaria, M. H. Ahsan, T. K. Datta, S. Aktar, S. I. Liba, S. Hossain, A. K. Das, I. Kamal, S. M. Yunus, D. K. Saha, S.-G. Eriksson
• Citations: 12 (Details)

• Biomimetically Synthesized Aqueous Ferrofluids Having Antibacterial and Anticancer Properties, Materials Sciences and Applications, Vol.6 No.3, 2015
• Lubna Sheikh, Richa Vohra, Anita Kamra Verma, Suprabha Nayar
• Citations: 12 (Details)

• The Theory of Coherent Synchronized Reactions: Chemical Interference Logics, Materials Sciences and Applications, Vol.6 No.2, 2015
• T. M. Nagiev
• Citations: 12 (Details)

• Reinforcement of Lignin-Based Phenol-Formaldehyde Adhesive with Nano-Crystalline Cellulose (NCC): Curing Behavior and Bonding Property of Plywood, Materials Sciences and Applications, Vol.6 No.6, 2015
• Zhenbo Liu, Yaolin Zhang, Xiangming Wang, Denis Rodrigue
• Citations: 12 (Details)

• Thermal Conductivity of Compressed Earth Bricks Strengthening by Shea Butter Wastes with Cement, Materials Sciences and Applications, Vol.8 No.12, 2017
• Herve Goure Doubi, Alfred Niamien Kouamé, Léon Koffi Konan, Monique Tognonvi, Samuel Oyetola
• Citations: 12 (Details)

• Biochemical, Biophysical and Mechanical Characterization of Decellularized Dermal Implants, Materials Sciences and Applications, Vol.8 No.12, 2017
• Frederick H. Silver, Dale DeVore, Ruchit Shah
• Citations: 12 (Details)

• Abrasive WaterJet Machining of Thick Carrara Marble: Cutting Performance vs. Profile, Lagging and WaterJet Angle Assessments, Materials Sciences and Applications, Vol.8 No.5, 2017
• Mohammad S. Alsoufi, Dhia K. Suker, Mohammed W. Alhazmi, Sufyan Azam
• Citations: 12 (Details)

• Multiphysics Based Simulation of Damage Progression in Composites, Materials Sciences and Applications, Vol.8 No.5, 2017
• Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider
• Citations: 12 (Details)

• Formation and Gas Barrier Characteristics of Polysilazane-Derived Silica Coatings Formed by Excimer Light Irradiation on PET Films with Vacuum Evaporated Silica Coatings, Materials Sciences and Applications, Vol.8 No.1, 2017
• Tomoji Ohishi, Yoshimi Yamazaki
• Citations: 12 (Details)

• A Comparison between the Mechanical Behaviour of Steel Wires and Ultra High Molecular Weight Poly Ethylene Cables for Sternum Closure, Materials Sciences and Applications, Vol.2 No.10, 2011
• Roelof Marissen, Mischa Nelis, Mildred Janssens, Michelle D. M. E. Meeks, Jos G. Maessen
• Citations: 12 (Details)

• Ablation Properties of C Fibers and SiC Fibers Reinforced Glass Ceramic Matrix Composites Upon Oxyacetylene Torch Exposure, Materials Sciences and Applications, Vol.2 No.10, 2011
• Julien Beaudet, Jonathan Cormier, André Dragon, Magali Rollin, Guillaume Benoit
• Citations: 12 (Details)

• Finite Element Wear Behavior Modeling of Al/Al₂SiO₅/C Chilled Hybrid Metal Matrix Composites (CHMMCs), Materials Sciences and Applications, Vol.2 No.7, 2011
• Joel Hemanth
• Citations: 12 (Details)

• Hydrogels from Chitosan and a Novel Copolymer Poly(N-Vinyl-2-Pyrrolidone-Co-Acrolein), Materials Sciences and Applications, Vol.2 No.8, 2011
• Janaina Aline Galvão Barros, Antonio Jedson Caldeira Brant, Luiz Henrique Catalani
• Citations: 12 (Details)

• Effects of Methacrylic Acid on Physical/Mechanical Properties and Biocompatibility of Urethane-Based Denture Biomaterials, Materials Sciences and Applications, Vol.2 No.8, 2011
• Zhengbing Cao, Xinbo Sun, Chih-Ko Yeh, Yuyu Sun
• Citations: 12 (Details)

• Conductivity Studies in Proton Irradiated AgI-Ag2O-V2O5-TeO2 Super-Ionic Glass System, Materials Sciences and Applications, Vol.1 No.2, 2010
• Poonam Sharma, Dinesh Kumar Kanchan, Meenakshi Pant, Karan Pal Singh
• Citations: 12 (Details)

• Preparation of Micron-Sized Di-Functional Magnetic Composite Polymer Particles, Materials Sciences and Applications, Vol.1 No.3, 2010
• Hasan Ahmad, Tania Tofaz, Mohammad Wali Ullah Oli, Mohammad Abdur Rahman, Mohammad Abdul Jalil Miah, Klaus Tauer
• Citations: 12 (Details)

• Plasticization Effect on the Photodegradation of Poly (4-Chlorostyrene) and Poly (4-Bromostyrene) Films, Materials Sciences and Applications, Vol.1 No.6, 2010
• Khalid E. Al Ani, Afrah Essa Ramadhan
• Citations: 12 (Details)

• Corrosion Inhibition of Copper in 3% NaCl Solution by Derivative of Aminotriazole, Materials Sciences and Applications, Vol.2 No.4, 2011
• Karima Rhattas, Mohammed Benmessaoud, Mostafa Doubi, Najjat Hajjaji, Abdellah Srhiri
• Citations: 12 (Details)

• Synthesis, Characterization and Charge-Discharge Properties of Layer-Structure Lithium Zinc Borate, LiZnBO₃, Materials Sciences and Applications, Vol.4 No.4, 2013
• Isao Tsuyumoto, Akihiro Kihara
• Citations: 12 (Details)

• Dynamic Behaviour of Cast A356/Al₂O₃ Aluminum Metal Matrix Nanocomposites, Materials Sciences and Applications, Vol.3 No.11, 2012
• E. Y. El-Kady, T. S. Mahmoud, A. A. El-Betar, M. Abdel-Aziz
• Citations: 12 (Details)

• Analytical and Experimental Studies of Liquid and Gas Leaks through Micro and Nano-Porous Gaskets, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Lotfi Grine, Abdel-Hakim Bouzid
• Citations: 12 (Details)

• Effect of Carbon Graphite on the Crystallization of Andalusite: Application to the Synthesis of Mullite and the Improvement of Refractory Quality, Materials Sciences and Applications, Vol.4 No.6, 2013
• Chaouki Sadik, Iz-Eddine El Amrani, Abderrahman Albizane
• Citations: 12 (Details)

• Effects of Titanium Sputtering Current on Structure and Morphology of TiZrN Films Prepared by Reactive DC Magnetron Co-Sputtering, Materials Sciences and Applications, Vol.4 No.11, 2013
• Somchai Chinsakolthanakorn, Adisorn Buranawong, Surasing Chiyakun, Pichet Limsuwan
• Citations: 12 (Details)

• Cracking Phenomenon in Spot Welded Joints of Austenitic Stainless Steel, Materials Sciences and Applications, Vol.4 No.10, 2013
• Ahmed M. Al-Mukhtar, Qasim M. Doos
• Citations: 12 (Details)

• Bismuth Effect on the Mechanical Properties of Antifriction Al-Sn Alloys, Materials Sciences and Applications, Vol.5 No.5, 2014
• Isai Rosales, Gonzalo Gonzalez-Rodriguez, Jose Luis Gama, Rene Guardian
• Citations: 12 (Details)

• Transport Properties of AgInSe₂ Crystals, Materials Sciences and Applications, Vol.5 No.5, 2014
• Hamdy T. Shaban, Melaad K. Gergs
• Citations: 12 (Details)

• Experimental Study of the Drying Kinetics of the Coconut Shells (Nucifera) of Cameroon, Materials Sciences and Applications, Vol.4 No.12, 2013
• Dieunedort Ndapeu, Ebénezer Njeugna, Sophie Brogly Bistac, Jean Yves Drean, Médard Fogue, Josepha Ngenefeme Foba
• Citations: 12 (Details)

• Electrochemical and Stress Corrosion Cracking Behavior of Alpha-Al Bronze in Sulfide-Polluted Salt Water: Effect of Environmentally-Friendly Additives, Materials Sciences and Applications, Vol.5 No.1, 2014
• Elsayed A. Ashour, Lobna A. Khorshed, Gehan I. Youssef, Hossam M. Zakria, Tarek A. Khalifa
• Citations: 12 (Details)

• Comparative Study of Chemically and Mechanically Activated Clay Pozzolana, Materials Sciences and Applications, Vol.5 No.2, 2014
• James Sarfo-Ansah, Eugene Atiemo, Kwabena Appiah Boakye, Zsuzsanne Momade
• Citations: 11 (Details)

• Photoluminescence Spectroscopy as a Tool for Quality Control of GaN Thin Film to Be Used in Solar Cell Devices, Materials Sciences and Applications, Vol.5 No.5, 2014
• Guillermo Santana-Rodríguez, Adolfo Mejía-Montero, Betsabeé Marel Monroy-Peláez, Máximo López-López, Yenny Lucero Casallas-Moreno, Manolo Ramírez-López, Gerardo Contreras-Puente, Osvaldo de Melo-Pereira
• Citations: 11 (Details)

• Effect of Water Content on Crystalline Structure of Ionic Liquids Mixture Pretreated Microcrystalline Cellulose (MCC), Materials Sciences and Applications, Vol.5 No.4, 2014
• Qingyue Wang, Qiyu Chen, Hiroki Niida, Naoki Mitsumura, Takumi Endo
• Citations: 11 (Details)

• Synthesis of Zirconia Oxide (ZrO₂) Nanofibers on Zirconnia Substrates by Ultrasonic Spray Pyrolysis, Materials Sciences and Applications, Vol.5 No.4, 2014
• Jianhui Zhang, Wei Li, Takayoshi Tanji
• Citations: 11 (Details)

• Cell Proliferation Ability of Mouse Fibroblast-Like Cells and Osteoblast-Like Cells on a Ti-6Al-4V Alloy Film Produced by Selective Laser Melting, Materials Sciences and Applications, Vol.5 No.7, 2014
• Mayu Kawase, Tatsuhide Hayashi, Masaki Asakura, Akimichi Mieki, Hironari Fuyamada, Masahiro Sassa, Shizuka Nakano, Masashi Hagiwara, Toru Shimizu, Tatsushi Kawai
• Citations: 11 (Details)

• Corrosion Resistance of Zn and Zn-Ni Electrodeposits: Morphological Characterization and Phases Identification, Materials Sciences and Applications, Vol.4 No.10, 2013
• Conceição A. M. Dutra, José W. J. Silva, Roberto Z. Nakazato
• Citations: 11 (Details)

• Electrodeposition and Characterization of Cu(In, Al)Se₂ for Applications in Thin Film Tandem Solar Cells, Materials Sciences and Applications, Vol.4 No.11, 2013
• Omar Meglali, Nadhir Attaf, Assia Bouraiou, Mohamed Salah Aida
• Citations: 11 (Details)

• Heterostructure Solar Cells Based on Sol-Gel Deposited SnO₂ and Electrochemically Deposited Cu₂O, Materials Sciences and Applications, Vol.4 No.6A, 2013
• Akito Fukuda, Masaya Ichimura
• Citations: 11 (Details)

• Bonding Orthodontic Ceramic Brackets to Ceramic Restorations: Evaluation of Different Surface Conditioning Methods, Materials Sciences and Applications, Vol.4 No.7B, 2013
• Andreas Faltermeier, Claudia Reicheneder, Peter Götzfried, Peter Proff
• Citations: 11 (Details)

• Sulphurization of the Electrochemically Deposited Indium Sulphide Oxide Thin Film and Its Photovoltaic Applications, Materials Sciences and Applications, Vol.3 No.11, 2012
• Ashraf M. A. Haleem, Mutsumi Sugiyama, Masaya Ichimura
• Citations: 11 (Details)

• Improved Low-Temperature Aqueous Synthesis of ZnO Nanorods and Their Use in SERS Detection of 4-ABT and RDX, Materials Sciences and Applications, Vol.4 No.1, 2013
• Marcia del R. Balaguera-Gelves, Oscar J. Perales-Pérez, Surinder P. Singh, José A. Jiménez, Joaquín A. Aparicio-Bolaños, Samuel P. Hernández-Rivera
• Citations: 11 (Details)

• Recovery of Heavy Metal Using Solvent Impregnated Resin (SIR) Coupled with Donnan Dialysis, Materials Sciences and Applications, Vol.3 No.10, 2012
• Dalila Berdous, Djamel Eddine Akretche
• Citations: 11 (Details)

• The Effect of Several Service and Weathering Parameters on Tensile Properties of PVC Pipe Materials, Materials Sciences and Applications, Vol.3 No.11, 2012
• N. A. Saad, M. H. Al-Maamory, M. R. Mohammed, A. A. Hashim
• Citations: 11 (Details)

• Characterization of Electrical Behavior of Ba₅HoTi₃V₇O₃₀ Ceramic Using Impedance Analysis, Materials Sciences and Applications, Vol.3 No.6, 2012
• Kiran Kathayat, Anuradha Panigrahi, Arvind Pandey, Susmita Kar
• Citations: 11 (Details)

• Effect of Scandium Doping on The Corrosion Resistance and Mechanical Behavior of Al-3Mg Alloy in Neutral Chloride Solutions, Materials Sciences and Applications, Vol.2 No.4, 2011
• Zaki Ahmad, Abdul Aleem B. Aleem, Mohammad Abbas
• Citations: 11 (Details)

• Electromechanical Properties of Ethylene Propylene Diene Elastomers: Effect of Ethylene Norbornene Content, Materials Sciences and Applications, Vol.2 No.5, 2011
• Patcharee Intanoo, Anuvat Sirivat, Ruksapong Kunanuruksapong, Wanchai Lerdwijitjarud
• Citations: 11 (Details)

• Influence of Defects on Low Temperature Diffusion of Boron in SiC, Materials Sciences and Applications, Vol.2 No.9, 2011
• Ilkham G. Atabaev, Tojiddin M. Saliev, Dilmurad Saidov, Vadim A. Pak, Khimmatali Juraev, Chin-Che Tin, Bakhtiyar G. Atabaev, Vyacheslav N. Giryansky
• Citations: 11 (Details)

• EBSD Analysis of the Submicron Width Fibber Shaped Grain Copper Fabricated by Drawing, Materials Sciences and Applications, Vol.2 No.7, 2011
• Masafumi Matsushita, Tomoya Kuji, Hiromitsu Kuroda, Seigi Aoyama, Hiroaki Ohfuji
• Citations: 11 (Details)

• Electrical Transport Properties of La-BaTiO₃, Materials Sciences and Applications, Vol.2 No.7, 2011
• A. I. Ali, Saleh H. Kaytbay
• Citations: 11 (Details)

• Synthesis of Carbon Nano Tubes on Silicon Substrates Using Alcohol Catalytic Chemical Vapor Deposition, Materials Sciences and Applications, Vol.2 No.7, 2011
• Mohammad Abu-Abdeen, Abdu Aljaafari
• Citations: 11 (Details)

• Synthesis and Characterization of Cholesteric Thermotropic Liquid Crystalline Polyesters Based on Isosorbide, Materials Sciences and Applications, Vol.2 No.10, 2011
• Nayaku N. Chavan
• Citations: 11 (Details)

• Correlations of Structural, Dielectric, Magnetic and Magnetoelectric Properties of Ca_1-xSr_x(Fe_0.5Ta_0.5)O₃ Multiferroic Ceramics, Materials Sciences and Applications, Vol.8 No.1, 2017
• M. K. H. Bhuiyan, M. A. Gafur, M. N. I. Khan, A. A. Momin, A. K. M. Akther Hossain
• Citations: 11 (Details)

• Characterization of Face Sheet/Core Debonding Strength in Sandwiched Medium Density Fiberboard, Materials Sciences and Applications, Vol.8 No.9, 2017
• Mohamed K. Hassan
• Citations: 11 (Details)

• Correlation between Electrical Conductivity and Microwave Shielding Effectiveness of Natural Rubber Based Composites, Containing Different Hybrid Fillers Obtained by Impregnation Technology, Materials Sciences and Applications, Vol.7 No.9, 2016
• Ahmed A. Al-Ghamdi, Omar A. Al-Hartomy, Falleh R. Al-Solamy, Nikolay T. Dishovsky, Petrunka Malinova, Nikolay T. Atanasov, Gabriela L. Atanasova
• Citations: 11 (Details)

• Experimental Study of the Water Absorption Kinetics of the Coconut Shells (Nucifera) of Cameroun, Materials Sciences and Applications, Vol.7 No.3, 2016
• Dieunedort Ndapeu, Ebénezer Njeugna, Nicodème Rodrigue Sikame, Sophie Brogly Bistac, Jean Yves Drean, Médard Fogue
• Citations: 11 (Details)

• Performance Evaluation of One-Way Concrete Slabs Reinforced with New Developed GFRP Bars, Materials Sciences and Applications, Vol.6 No.5, 2015
• Ahmed H. Ali, Mohammad Z. Afifi, Bahira Abdulsalam, Hesham Haggag, Awad El Hashimy, Tarek El-Sayed, Hamdy M. Mohamed
• Citations: 11 (Details)

• Temperature Dependent Surface Resistivity Measures of Commercial, Multiwall Carbon Nanotubes (MWCNT), and Silver Nano-Particle Doped Polyvinyl Alcohol (PVA) Films, Materials Sciences and Applications, Vol.5 No.13, 2014
• Matthew Edwards, Stephen Egarievwe, Afef Janen, Tatiana Kukhtarev, Jemilia Polius, John Corda
• Citations: 11 (Details)

• The Effect of ECAP Deformation Route on Microstructure, Mechanical and Electrochemical Properties of Low CN Fe-20%Cr Alloy, Materials Sciences and Applications, Vol.5 No.8, 2014
• Muhammad Rifai, Hiroyuki Miyamoto, Hiroshi Fujiwara
• Citations: 11 (Details)

• Role of Metallic Nanofillers on Mechanical and Tribological Behaviour of Carbon Fabric Reinforced Epoxy Composites, Materials Sciences and Applications, Vol.9 No.9, 2018
• G. S. Divya, B. Suresha
• Citations: 11 (Details)

• Effect of Ultrasonic Irradiation Conditions on Metal Surface during Multifunction Cavitation, Materials Sciences and Applications, Vol.9 No.8, 2018
• Masataka Ijiri, Toshihiko Yoshimura
• Citations: 10 (Details)

• Structural and Thermomechanical Study of Plastic Films Made from Cassava-Starch Reinforced with Kaolin and Metakaolin, Materials Sciences and Applications, Vol.9 No.1, 2018
• Namory Meite, Léon Koffi Konan, Drissa Bamba, Bi Irié Hervé Goure-Doubi, Samuel Oyetola
• Citations: 10 (Details)

• Formation of Copper Nickel Bimetallic Nanoalloy Film Using Precursor Inks, Materials Sciences and Applications, Vol.10 No.4, 2019
• Chaitanya G. Mahajan, Amanda Marotta, Bruce E. Kahn, Mark Irving, Surendra Gupta, Richard Hailstone, Scott A. Williams, Denis Cormier
• Citations: 10 (Details)

• Strain Rate Effects on Tensile Properties of HDPE-PP Composite Prepared by Extrusion and Injection Moulding Method, Materials Sciences and Applications, Vol.10 No.3, 2019
• Harekrushna Sutar, Himanshu Sekhar Maharana, Chiranjit Dutta, Rabiranjan Murmu, Sangram Patra
• Citations: 10 (Details)

• Investigation of the Relation between Rolling Contact Fatigue Property and Microstructure on the Surface Layer of D2 Wheel Steel, Materials Sciences and Applications, Vol.10 No.8, 2019
• Shuaishuai Wang, Xiujuan Zhao, Pengtao Liu, Jinzhi Pan, Chunhuan Chen, Ruiming Ren
• Citations: 10 (Details)

• Spray-Dry Agglomerated Nanoparticles in Ordinary Portland Cement Matrix, Materials Sciences and Applications, Vol.5 No.12, 2014
• Tapio Vehmas, Ulla Kanerva, Erika Holt
• Citations: 10 (Details)

• Nano-Sized Elements in Electrochemical Biosensors, Materials Sciences and Applications, Vol.5 No.10, 2014
• Joanna Cabaj, Jadwiga Sołoducho
• Citations: 10 (Details)

• Adhesion of Silica Particles on Thin Polymer Films Model of Flax Cell Wall, Materials Sciences and Applications, Vol.5 No.13, 2014
• Samia Mahouche-Chergui, Yves Grohens, Eric Balnois, Bénédicte Lebeau, Yves Scudeller
• Citations: 10 (Details)

• Direct Structural Evidences of Epitaxial Growth Ge_1-X Mn_X Nanocolumn Bi-Layers on Ge(001), Materials Sciences and Applications, Vol.6 No.6, 2015
• Thi Giang Le
• Citations: 10 (Details)

• Study of Structural and Morphological Properties of Vacuum Coated Copper (Cu) Metal Thin Film, Materials Sciences and Applications, Vol.6 No.8, 2015
• M. M. Alam, Md. Nasrul Haque Mia, R. Hasan, M. Shahinuzzaman, M. K. Islam, Khan. M. Nasir Uddin
• Citations: 10 (Details)

• A Two-Step Method for the Preparation of Highly Conductive Graphene Film and Its Gas-Sensing Property, Materials Sciences and Applications, Vol.6 No.11, 2015
• Tran Van Khai, Tran Dai Lam, Le Van Thu, Hyoun Woo Kim
• Citations: 10 (Details)

• Wootz: Cast Iron or Steel?, Materials Sciences and Applications, Vol.7 No.11, 2016
• D. A. Sukhanov, N. V. Plotnikova
• Citations: 10 (Details)

• Development of Polycaprolactone/Poly(Vinyl Alcohol)/Clay Microparticles by Spray Drying, Materials Sciences and Applications, Vol.7 No.10, 2016
• Mariana Sato de S. de B. Monteiro, Claudia Lopes Rodrigues, Eduardo Miguez, Maria Inês B. Tavares
• Citations: 10 (Details)

• Effect of Carbon Fillers in Ultrahigh Molecular Weight Polyethylene Matrix Prepared by Twin-Screw Extrusion, Materials Sciences and Applications, Vol.7 No.12, 2016
• Luiz Felipe M. Rocha, Suellem B. Cordeiro, Leonardo C. Ferreira, Flávio James H. Ramos, Maria de Fátima Marques
• Citations: 10 (Details)

• The Thermal Decomposition of Ammonium Perchlorate-Aluminum Propellants in Presence of Metallic Zinc Particles, Materials Sciences and Applications, Vol.8 No.6, 2017
• Mónica Rodríguez-Pesina, Jorge García-Domínguez, Felipe García-Hernández, Luisa Maria Flores-Vélez, Octavio Domínguez
• Citations: 10 (Details)

• The Barrier Properties of Flake-Filled Composites with Precise Control of Flake Orientation, Materials Sciences and Applications, Vol.8 No.3, 2017
• A. Tsiantis, T. D. Papathanasiou
• Citations: 10 (Details)

• Degradation of Japanese Lacquer under Wavelength Sensitivity of Light Radiation, Materials Sciences and Applications, Vol.2 No.10, 2011
• Kosuke Nakagoshi, Kunio Yoshizumi
• Citations: 10 (Details)

• Thermoelectric Power of Cu-Zn Ferrites, Materials Sciences and Applications, Vol.2 No.11, 2011
• Hussain Abd-Elkariem Dawoud
• Citations: 10 (Details)

• Predicting the Fatigue Life in Steel and Glass Fiber Reinforced Plastics Using Damage Models, Materials Sciences and Applications, Vol.2 No.6, 2011
• Roselita Fragoudakis, Anil Saigal
• Citations: 10 (Details)

• Studies on interacting Blends of Acrylated Epoxy resin based Poly(Ester-Amide)s and Vinyl EsterResin, Materials Sciences and Applications, Vol.2 No.7, 2011
• Pragnesh N. Dave, Nikul N. Patel
• Citations: 10 (Details)

• The Potential of Silane Coated Calcium Carbonate on Mechanical Properties of Rigid PVC Composites for Pipe Manufacturing, Materials Sciences and Applications, Vol.2 No.5, 2011
• Amin Al Robaidi, Ahmad Mousa, Sami Massadeh, Ibrahim Al Rawabdeh, Nabil Anagreh
• Citations: 10 (Details)

• Temperature Dependent Luminescence Spectra of Synthetic and Natural Alexandrite (BeAl₂O₄:Cr³⁺), Materials Sciences and Applications, Vol.2 No.4, 2011
• Neilo Marcos Trindade, Américo Tabata, Rosa Maria Fernandes Scalvi, Luis Vicente de Andrade Scalvi
• Citations: 10 (Details)

• Using Kaolinitic Clay for Preparation of a Hydrotalcite-Like Compound, Materials Sciences and Applications, Vol.2 No.6, 2011
• Khaled Hosni, Ezzeddine Srasra
• Citations: 10 (Details)

• Strain Energy Release Rate Analyse of Matrix Micro Cracking in Composite Cross-Ply Laminates, Materials Sciences and Applications, Vol.2 No.6, 2011
• Jean-Luc Rebière, Denys Gamby
• Citations: 10 (Details)

• Forming Stages of Polycrystalline TiN Films Depending on the Nitrogen Concentration in Mixed Gas, Materials Sciences and Applications, Vol.2 No.1, 2011
• Anna L. Kameneva
• Citations: 10 (Details)

• Modulus and Hardness Change of Silicon and Sapphire Substrates by TiC/VC Multilayer Coatings, Materials Sciences and Applications, Vol.3 No.4, 2012
• André Belger, Marianne Reibold, Peter Paufler
• Citations: 10 (Details)

• Inhomogeneous Hardness Distribution of High Pressure Torsion Processed IF Steel Disks, Materials Sciences and Applications, Vol.3 No.4, 2012
• Yuepeng Song, Wenke Wang, Dongsheng Gao, Hyoung-Seop Kim, Eun-Yoo Yoon, Dong-Jun Lee, Chong-Soo Lee, Jing Guo
• Citations: 10 (Details)

• Mold Thermo-Mechanical Rigidity Criterion for Surface Quality of Continuous Casting of Steel, Materials Sciences and Applications, Vol.4 No.1, 2013
• Mostafa Omar El-Bealy
• Citations: 10 (Details)

• Enhancement of Performance of Organic Light Emitting Diodes by Using Ti- and Mo-Oxide Nano Hybrid Layers, Materials Sciences and Applications, Vol.4 No.4, 2013
• Nguyen Nang Dinh, Do Ngoc Chung, Tran Thi Thao, Tran Thi Chung Thuy, Le Ha Chi, Vo-Van Truong
• Citations: 10 (Details)

• Investigation of Element Profiles, Defects, Phase Composition and Physical and Mechanical Properties of Superhard Coatings Ti-Hf-Si-N, Materials Sciences and Applications, Vol.4 No.4A, 2013
• Alexander D. Pogrebnjak
• Citations: 10 (Details)

• Surface Modification of NaCl Particles with Metal Films Using the Polygonal Barrel-Sputtering Method, Materials Sciences and Applications, Vol.4 No.7B, 2013
• Satoshi Akamaru, Mitsuhiro Inoue, Takayuki Abe
• Citations: 10 (Details)

• Effect of Synthesis Routes on Microstructure of Nanocrystalline Cerium Oxide Powder, Materials Sciences and Applications, Vol.4 No.9, 2013
• Ashutosh Sharma
• Citations: 10 (Details)

• In Vitro Corrosion and Bioactivity Study of Surface Phytic Acid Modified AZ31 Magnesium Alloy, Materials Sciences and Applications, Vol.5 No.2, 2014
• Xu Yang, Lanlan Li, Jian He, Haiying Guo, Jiqiang Zhang
• Citations: 10 (Details)

• Deposition of Titanium Layer on Steel Substrate Using PECVD Method: A Parametric Study, Materials Sciences and Applications, Vol.5 No.3, 2014
• Haman Hedaiatmofidi, Alireza Sabour Rouh Aghdam, Shahrokh Ahangarani, Mansour Bozorg, Mahboube Azadi, Maryam Valiei
• Citations: 10 (Details)

• Distribution of Electromagnetic Force of Square Working Coil for High-Speed Magnetic Pulse Welding Using FEM, Materials Sciences and Applications, Vol.4 No.12, 2013
• Ji-Yeon Shim, Bong-Yong Kang
• Citations: 10 (Details)

• Numerical Evaluation of Strength in the Interface during Indentation Spherical Testing in Thin Films, Materials Sciences and Applications, Vol.5 No.3, 2014
• Rodrigo Araújo, Avelino Manuel da Silva Dias
• Citations: 9 (Details)

• Strengthening of Alumina-Based Ceramics with Titanium Nanoparticles, Materials Sciences and Applications, Vol.5 No.7, 2014
• Sergio J. Esparza-Vázquez, Enrique Rocha-Rangel, José A. Rodríguez-García, Constantin A. Hernández-Bocanegra
• Citations: 9 (Details)

• Usefulness of Agarose Mold as a Storage Container for Three-Dimensional Tissue-Engineered Cartilage, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Yoshiyuki Mori, Sanshiro Kanazawa, Makoto Watanabe, Hideyuki Suenaga, Kazumi Okubo, Satoru Nagata, Yuko Fujihara, Tsuyoshi Takato, Kazuto Hoshi
• Citations: 9 (Details)

• Gelation of Antheraea pernyi Silk Fibroin Accelerated by Shearing, Materials Sciences and Applications, Vol.4 No.6, 2013
• Yu Liu, Siyong Xiong, Renchuan You, Mingzhong Li
• Citations: 9 (Details)

• Characteristics of Corrosion Product Layer Formed on Weathering Steel Exposed to the Tropical Climate of Vietnam, Materials Sciences and Applications, Vol.4 No.7A, 2013
• Le Thi Hong Lien, Hoang Lam Hong
• Citations: 9 (Details)

• Organically-Expanded Graphite/Octadecylamine: Structural, Thermal and Relaxation Evaluation, Materials Sciences and Applications, Vol.4 No.5, 2013
• Lilian G. Carreira, Luis C. Mendes, Maria R. G. Ribeiro, Pedro J. Sebastião
• Citations: 9 (Details)

• Optical and Morphological Studies of Chemical Bath Deposited Nanocrystalline Cd_1-xZn_xS Thin Films, Materials Sciences and Applications, Vol.4 No.5, 2013
• Kasim Uthman Isah
• Citations: 9 (Details)

• Method of Crack Formation Analysis Based on Mechanoluminecence, Materials Sciences and Applications, Vol.3 No.10, 2012
• Sergej Aman, Alexander Aman, Juergen Tomas
• Citations: 9 (Details)

• Photoelectrochemical Studies at CdS/PTTh Nanoparticles Interfaces, Materials Sciences and Applications, Vol.3 No.10, 2012
• Kasem K. Kasem, Nida Zia
• Citations: 9 (Details)

• Testing the Use of Coconut Fiber as a Cushioning Material for Transport Packaging, Materials Sciences and Applications, Vol.3 No.3, 2012
• Clívia D. Pinho da Costa Castro, José de Assis Fonseca Faria, Tiago Bassani Hellmeister Dantas
• Citations: 9 (Details)

• SnO₂ Dense Ceramic Microwave Sintered with Low Resistivity, Materials Sciences and Applications, Vol.3 No.5, 2012
• Leinig Antonio Perazolli, Gisane Gasparotto, Natalia Jaomaci, Miguel Ruiz, Maria Aparecida Zaghete Bertochi, Cesar Renato Foschini, Ederson Carlos Aguiar, José Arara Varela
• Citations: 9 (Details)

• Direct and Alternate Current Conductivity and Magnetoconductivity of Nanocrystalline Cadmium-Zinc Ferrite below Room Temperature, Materials Sciences and Applications, Vol.2 No.4, 2011
• Somenath Ghatak, Goutam Chakraborty, Monika Sinha, Swapan Kumar Pradhan, Ajit Kumar Meikap
• Citations: 9 (Details)

• Liquid Column Deformation and Particle Size Distribution in Gas Atomization, Materials Sciences and Applications, Vol.2 No.2, 2011
• Georgios S. E. Antipas
• Citations: 9 (Details)

• Ferroelectric Phase Transition in Graphene with Anderson Interaction, Materials Sciences and Applications, Vol.1 No.2, 2010
• Natalia Yanyushkina, Mikhail Belonenko, Nikolay Lebedev
• Citations: 9 (Details)

• Corrosion Behavior of Cu₆₀Zr₃₀Ti₁₀ Metallic Glass in the Cl^– Containing Solution, Materials Sciences and Applications, Vol.2 No.6, 2011
• Wei-Ke An, An-Hui Cai, Xiang Xiong, Yong Liu, Yun Luo, Tie-Lin Li, Xiao-Song Li
• Citations: 9 (Details)

• Particle Size Control, Sinterability and Piezoelectric Properties of BaTiO₃ Prepared by a Novel Composite-Hydroxide-Mediated Approach, Materials Sciences and Applications, Vol.2 No.7, 2011
• Yahong Xie, Takesi Kimura, Shu Yin, Takatoshi Hashimoto, Yuichi Tokano, Atsushi Sasaki, Tsugio Sato
• Citations: 9 (Details)

• Synthesis of Sn-3.5Ag Alloy Nanosolder by Chemical Reduction Method, Materials Sciences and Applications, Vol.2 No.10, 2011
• Hsin Jen Pan, Chao Yang Lin, Udit Surya Mohanty, Jung Hua Chou
• Citations: 9 (Details)

• Effect of Annealing on the Structural and Optical Properties of CuIn_1–xAl_xS₂ thin Films, Materials Sciences and Applications, Vol.2 No.9, 2011
• Fethi Smaili
• Citations: 9 (Details)

• Morphological Structure Characterization of PAH/NiTsPc Multilayer Nanostructured Films, Materials Sciences and Applications, Vol.2 No.11, 2011
• Josmary R. Silva, Jackeline B. Brito, Sonia T. Tanimoto, Nara C. de Souza
• Citations: 9 (Details)

• A Novel Thin-Film, Single-Junction Solar Cell Design¹ to Achieve Power Conversion Efficiency above 30 Percent, Materials Sciences and Applications, Vol.7 No.12, 2016
• Joseph Edward O’Connor, Sherif Michael
• Citations: 9 (Details)

• Study of the Effect of Gas Nitriding Time on Microstructure and Wear Resistance of 42CrMo4 Steel, Materials Sciences and Applications, Vol.8 No.6, 2017
• Mohamed Ali Terres, Lotfi Ammari, Abdelkarim Chérif
• Citations: 9 (Details)

• Comparison of Aggressiveness Behavior of Chloride and Iodide Solutions on 304 and 304L Stainless Steel Alloys, Materials Sciences and Applications, Vol.8 No.12, 2017
• Shaymaa Mahdi Salih, Ibtehal K. Shakir, Abdulkareem M. A. Al-Sammarraie
• Citations: 9 (Details)

• Evaluation of Susceptibility to Hydrogen Embrittlement—A Rising Step Load Testing Method, Materials Sciences and Applications, Vol.7 No.8, 2016
• Wei Zhang
• Citations: 9 (Details)

• Effect of TiO₂ Filler Loading on Physico-Mechanical Properties and Abrasion of Jute Fabric Reinforced Epoxy Composites, Materials Sciences and Applications, Vol.7 No.9, 2016
• Bheemappa Suresha, Suryakanth L. Guggare, Naraganahalli V. Raghavendra
• Citations: 9 (Details)

• Ion Beam Analysis and Electric Properties of GdBa₂Cu₃O_7-δ Added with Nanosized Ferrites ZnFe₂O₄ and CoFe₂O₄, Materials Sciences and Applications, Vol.6 No.9, 2015
• Hadi Basma, Mohamad Roumié, Ramadan Awad, Salem Marhaba, Mohamad Albast, Ali Abualy
• Citations: 9 (Details)

• Characterization of Structure and Property of the Monocarboxyl Bamboo Pulp Fibers, Materials Sciences and Applications, Vol.6 No.4, 2015
• Zhaofang Du, Liling Zhang, Yunhui Xu
• Citations: 9 (Details)

• UV/O₃ Preirradiated Cotton Fabric-Containing Chitosan for Effective Removal of Heavy Metals, Materials Sciences and Applications, Vol.5 No.10, 2014
• A. Hebeish, Kh. Elnagar, M. H. Helal, M. S. Ragab, M. F. Shaaban
• Citations: 9 (Details)

• The Development of ZnO Nanoparticle Coated Cotton Fabrics for Antifungal and Antibacterial Applications, Materials Sciences and Applications, Vol.11 No.9, 2020
• Tanu Shree Roy, Siraj Ud Daula Shamim, Md. Khalidur Rahman, F. Ahmed, M. A. Gafur
• Citations: 9 (Details)

• Synthesis, Characterization, Optical and Transport Properties of BaSnO₃ Synthesized by Wet Chemical Route, Materials Sciences and Applications, Vol.9 No.1, 2018
• Rakesh Kurre, Sharmila Bajpai, Parmendra Kumar Bajpai
• Citations: 9 (Details)

• The Influence of the Precipitation Heat Treatment Temperature on the Metallurgical, Microstructure, Thermal Properties, and Microhardness of an Alpha Brass, Materials Sciences and Applications, Vol.9 No.4, 2018
• Ignacio Rojas-Rodríguez, Alberto Lara-Guevara, Mauricio Salazar-Sicacha, Julio Cesar Mosquera-Mosquera, Minerva Robles-Agudo, Cristian Ramirez-Gutierrez, Mario Rodríguez-García
• Citations: 9 (Details)

• Effects of Microstructural Modification Using Friction Stir Processing on Fatigue Strength of Butt-Welded Joints for High-Strength Steels, Materials Sciences and Applications, Vol.9 No.7, 2018
• Hajime Yamamoto, Kazuhiro Ito
• Citations: 9 (Details)

• Insight on the Ultrastructure, Physicochemical, Thermal Characteristics and Applications of Palm Kernel Shells, Materials Sciences and Applications, Vol.9 No.10, 2018
• Richard Ntenga, Etienne Mfoumou, Alexis Béakou, Martin Tango, Jordan Kamga, Ali Ahmed
• Citations: 9 (Details)

• Optimization of 6,13Bis(triisopropylsilylethynyl)pentacene (TIPS-Pentacene) Organic Field Effect Transistor: Annealing Temperature and Solvent Effects, Materials Sciences and Applications, Vol.9 No.11, 2018
• Diallo Abdoul Kadri, Diallo Abdou Karim, Mané Seck, Kobor Diouma, Pasquinelli Marcel
• Citations: 8 (Details)

• Stretchable Strain Sensors Fabricated by Screen Printing of Silver Paste on the Surface Modified Transparent Elastomeric Polyurethane Films, Materials Sciences and Applications, Vol.9 No.13, 2018
• Chang Gyu Lee, Bo Seok Kwon, Hyun Min Nam, Duck Min Seo, Jinwoo Park, Hyuc Hwangbo, Lee Soon Park, Su Yong Nam
• Citations: 8 (Details)

• Graphene Oxide/Multilayer-Graphene Synthesized from Electrochemically Exfoliated Graphite and Its Influence on Mechanical Behavior of Polyurethane Composites, Materials Sciences and Applications, Vol.9 No.7, 2018
• L. M. Flores-Vélez, O. Domínguez
• Citations: 8 (Details)

• Preparation and Characterization of Raw and Chemically Modified Sponge-Gourd Fiber Reinforced Polylactic Acid Biocomposites, Materials Sciences and Applications, Vol.9 No.2, 2018
• Taimur -Al-Mobarak, Md. Abdul Gafur, Md. Forhad Mina
• Citations: 8 (Details)

• Experimental Study on Improved Engineered Cementitious Composite Using Local Material, Materials Sciences and Applications, Vol.9 No.3, 2018
• Fariborz Nateghi-A, Mohammad Hossein Ahmadi, Ayoub Dehghani
• Citations: 8 (Details)

• Film-Forming Systems in Topically Administered Pharmaceutical Formulations, Materials Sciences and Applications, Vol.11 No.8, 2020
• Flora Ferreira Duarte de Oliveira, Livia Rodrigues de Menezes, Maria Inês Bruno Tavares
• Citations: 8 (Details)

• Thermal and Crystallization Behavior of PLA/PLLA-Grafting Cellulose Nanocrystal, Materials Sciences and Applications, Vol.11 No.1, 2020
• Erika M. Inácio, Diego H. S. Souza, Marcos L. Dias
• Citations: 8 (Details)

• A Study of Degradation in Vegetable Oils by Exposure to Sunlight Using Fourier Transform Infrared Spectroscopy, Materials Sciences and Applications, Vol.11 No.10, 2020
• Thiago Reixach Pires de Souza, Laudilene Olenka, Wilson Sacchi Peternella
• Citations: 8 (Details)

• Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality, Materials Sciences and Applications, Vol.12 No.1, 2021
• Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel
• Citations: 8 (Details)

• Determination of Five (5) Possible Contaminants in Recycled Cardboard Packages and Food Simulants Using Ultrasound Assisted Extraction Coupled to GC-MS, Materials Sciences and Applications, Vol.5 No.10, 2014
• Ioanna-Efpraxia Parigoridi, Konstantoula Akrida-Demertzi, Panagiotis G. Demertzis
• Citations: 8 (Details)

• Numerical Simulation of the Behavior of Cracked Reinforced Concrete Members, Materials Sciences and Applications, Vol.5 No.12, 2014
• Pietro Croce, Paolo Formichi
• Citations: 8 (Details)

• Photoluminescence Properties of Thulium and Cerium Co-Doped Tantalum-Oxide Films Prepared by Radio-Frequency Co-Sputtering, Materials Sciences and Applications, Vol.6 No.4, 2015
• Kenta Miura, Takumi Osawa, Yuya Yokota, Tetsuhito Suzuki, Osamu Hanaizumi
• Citations: 8 (Details)

• Preparation of Light-Emitting Ytterbium-Doped Tantalum-Oxide Thin Films Using a Simple Co-Sputtering Method, Materials Sciences and Applications, Vol.6 No.2, 2015
• Kenta Miura, Kazusa Kano, Yuki Arai, Osamu Hanaizumi
• Citations: 8 (Details)

• Nano Phase Characterization by Transmission Electron Microscopy: Experimental and Simulation, Materials Sciences and Applications, Vol.6 No.11, 2015
• Francisco Miguel Ascencio Aguirre, Lourdes Bazán-Díaz, Rubén Mendoza-Cruz, Alfredo Gómez-Rodríguez, Cristina Zorrilla-Cangas, Raúl Herrera-Becerra
• Citations: 8 (Details)

• Dynamic Response of Pultruded Glass-Graphite/Epoxy Hybrid Composites Subjected to Transverse High Strain-Rate Compression Loading, Materials Sciences and Applications, Vol.6 No.11, 2015
• Mohammad Afrough, Tejas S. Pandya, Seyed Soheil Daryadel, Prabhakar Raju Mantena
• Citations: 8 (Details)

• Characterization of Dye Sensitized Cells Using Natural Dye from Oil Bean Leaf (Pentaclethra macrophylla): The Effect of Dye pH on the Photoelectric Parameters, Materials Sciences and Applications, Vol.6 No.7, 2015
• Temitope Abodunrin, Adenike Boyo, Olugbenga Obafemi, Timothy Adebayo
• Citations: 8 (Details)

• Synthesis of Polysilanes Using Mg and Lewis Acid and the Consideration of This Reaction Mechanism, Materials Sciences and Applications, Vol.6 No.6, 2015
• Hiroaki Murase, Masayuki Sugimoto, Hiroyuki Nishimura, Kazushi Yamada
• Citations: 8 (Details)

• Effects of Mechanical Fibrillation on Cellulose Reinforced Poly(Ethylene Oxide), Materials Sciences and Applications, Vol.6 No.8, 2015
• Tshwafo E. Motaung, Teboho C. Mokhena
• Citations: 8 (Details)

• Tribological Behavior of Thermally Sprayed WC Coatings under Water Lubrication, Materials Sciences and Applications, Vol.7 No.9, 2016
• Chaoqun Zhang, Masahiro Fujii
• Citations: 8 (Details)

• Strength Developing in Clay-Andesite Brick, Materials Sciences and Applications, Vol.7 No.8, 2016
• Víctor Julio García, Alonso R. Zúñiga-Suárez, Carmen Omaira Márquez, Juan G. Pérez, Francisco Fernández-Martínez, Francisco Hernández-Olivares
• Citations: 8 (Details)

• A Study by Ab-Initio Calculation of Structural and Electronic Properties of Semiconductor Nanostructures Based on ZnSe, Materials Sciences and Applications, Vol.7 No.9, 2016
• A. Rachidi, E. H. Atmani, N. Fazouan, M. Boujnah
• Citations: 8 (Details)

• Synthesis and Structural Characterization of Monocrystalline α-V₂O₅ Nanowires, Materials Sciences and Applications, Vol.7 No.9, 2016
• María Luisa Tafoya Ronquillo, Patricia Santiago Jacinto, Pilar Ovalle, Luis Rendón Vázquez, Elizabeth Chavira Martínez, Ernesto Marinero, Vicente Garibay
• Citations: 8 (Details)

• Study and Characterization of Soft Magnetic Properties of Fe_73.5Cu₁Nb3Si_13.5B₉ Magnetic Ribbon Prepared by Rapid Quenching Method, Materials Sciences and Applications, Vol.6 No.12, 2015
• Md. Khalid Hossain, Jannatul Ferdous, Md. Manjurul Haque, A. K. M. Abdul Hakim
• Citations: 8 (Details)

• Development of a High-PerformanceFlexible Substrate for Flexible Electronics:Joining TAC Films and an Ultra-Thin Glassby Using TEOS-DAC Synthesized by the Sol-Gel Method, Materials Sciences and Applications, Vol.6 No.12, 2015
• Tomoji Ohishi, Hiroaki Kawada, Tsutomu Yoshida, Takeshi Ohwada
• Citations: 8 (Details)

• Study of the Structural and Electrical Properties of Cr-Doped BiFeO₃ Ceramic, Materials Sciences and Applications, Vol.8 No.10, 2017
• S. S. Arafat, S. Ibrahim
• Citations: 8 (Details)

• Thermal Analysis of Laser Chemical Machining: Part I: Static Irradiation, Materials Sciences and Applications, Vol.8 No.10, 2017
• Hamza Messaoudi, Sandro Eckert, Frank Vollertsen
• Citations: 8 (Details)

• Fabrication of Perovskite-Type Photovoltaic Devices with Polysilane Hole Transport Layers, Materials Sciences and Applications, Vol.8 No.2, 2017
• Yasuhiro Shirahata, Takeo Oku, Sakiko Fukunishi, Kazufumi Kohno
• Citations: 8 (Details)

• Study of Dielectric and Piezoelectric Properties in the Ternary System Pb_0.98Ca_0.02[{(Zr_0.52Ti_0.48)_0.98(Cr³⁺_0.5 , Ta⁵⁺_0.5)_0.02}_1–zP_z]O₃ Doping Effects, Materials Sciences and Applications, Vol.3 No.1, 2012
• Hamzioui Louanes, Kahoul Fares, Abdessalem Nora, Boutarfaia Ahmed
• Citations: 8 (Details)

• Synthesis and Piezoelectric Properties of Pb_0.98Sm_0.02[(Zr_y,Ti_1–y)_0.98(Fe_1/2³⁺,Nb_1/2⁵⁺)_0.02]O₃ Ceramics, Materials Sciences and Applications, Vol.3 No.1, 2012
• Fares Kahoul, Louanes Hamzioui, Nora Abdessalem, Ahmed Boutarfaia
• Citations: 8 (Details)

• A Study on Preparation and Use of Nano Poly Pyrrole and Nano Poly (3,4-Ethylenedioxythiophene) Coated Glassy Carbon Electrode For The Determination of Antihistamine in Pharmaceutical and Urine Sample, Materials Sciences and Applications, Vol.2 No.8, 2011
• Balathandapani Muralidharan, Gopalakrishnan Gopu, Saraswathy Laya, Chinnapiyan Vedhi, Paramasivam Manisankar
• Citations: 8 (Details)

• Schottky Barriers on Layered Anisotropic Semiconductor – WSe₂ – with 1000 Å Indium Metal Thickness, Materials Sciences and Applications, Vol.2 No.8, 2011
• Achamma John Mathai, Chalappally Kesav Sumesh, Bharat Purushotamds Modi
• Citations: 8 (Details)

• Synthesis and Evaluation of Calcium-Deficient Hydroxyapatite with SiO₂, Materials Sciences and Applications, Vol.2 No.9, 2011
• Atsushi Nakahira, Kentaro Nakata, Chiya Numako, Hidenobu Murata, Katsuyuki Matsunaga
• Citations: 8 (Details)

• Ultrasonic Fatigue Endurance Investigation on Plastic Material Nylon 6, Materials Sciences and Applications, Vol.2 No.9, 2011
• Gonzalo M. Domínguez Almaraz, Erasmo Correa Gómez
• Citations: 8 (Details)

• Electronic States in Trans-CoCl₂(H₂O)₄ Complex, Materials Sciences and Applications, Vol.2 No.8, 2011
• Hajer Souissi, Souha kammoun
• Citations: 8 (Details)

• Combustion and Ball Milled Synthesis of Rare Earth Nano-Sized Ceria Powder, Materials Sciences and Applications, Vol.2 No.5, 2011
• Ranjan Sen, Siddhartha Das, Karabi Das
• Citations: 8 (Details)

• Photoluminescence Properties of LaF₃-Coated Porous Silicon, Materials Sciences and Applications, Vol.2 No.6, 2011
• Sinthia Shabnam Mou, Md. Johurul Islam, Abu Bakar Md Ismail
• Citations: 8 (Details)

• Temperature Dependence of Current-Voltage Characteristics in Individual Sb2Se3 Nanowire, Materials Sciences and Applications, Vol.1 No.1, 2010
• Kien-Wen Sun, Ting-Yuan Fan
• Citations: 8 (Details)

• Synthesis, Acid and Base Resistance of Various Copper Phosphate Pigments by the Substitution with Lanthanum, Materials Sciences and Applications, Vol.2 No.3, 2011
• Onoda Hiroaki, Okumoto Kenichi
• Citations: 8 (Details)

• Characterization and Application of Adsorption Material with Hematite and Polystyrene, Materials Sciences and Applications, Vol.2 No.4, 2011
• Dewen He, Yutang Xiao, Dingmin Liang, Huannian Zhou, Lu Du, Lei Liu
• Citations: 8 (Details)

• Preparation and Properties of PVC/ELNR-30 Blends, Materials Sciences and Applications, Vol.2 No.3, 2011
• Owen Egharevba, Felix Ebhodaghe Okieimen, Uzoma Ndubuisi Okwu, Dosu Malomo
• Citations: 8 (Details)

• Determination of the Pozzolanic Properties of Olotu Marine Clay and Its Potentials for Cement Production, Materials Sciences and Applications, Vol.2 No.1, 2011
• Jide Muliu Akande, Chinwuba Arum, Fola Micah Omosogbe
• Citations: 8 (Details)

• Stress Relaxation of a Paper Sheet under Cyclic Load: An Experimental and Theoretical Model, Materials Sciences and Applications, Vol.1 No.6, 2010
• Sharon Kao-Walter, Etienne Mfoumou, Efraim Laksman
• Citations: 8 (Details)

• Bifunctional Role of Thiosalicylic Acid in the Synthesis of Silver Nanoparticles, Materials Sciences and Applications, Vol.1 No.5, 2010
• Ramasamy Indumathy, Kalarical Janardhanan Sreeram, Muralidharan Sriranjani, Cheravathoor Poulose Aby, Balachandran Unni Nair
• Citations: 8 (Details)

• Microbiological Induced Corrosion on Brass in Recycling Cooling Water System Makeup by Reclaimed Water, Materials Sciences and Applications, Vol.3 No.4, 2012
• Ping Xu, Zhaoyi Xu, Jin Wang, Yajun Zhang, Ting Liu
• Citations: 8 (Details)

• Study of a Model Humic Acid-type Polymer by Fluorescence Spectroscopy and Atomic Force Microscopy, Materials Sciences and Applications, Vol.3 No.7, 2012
• Marcilene Ferrari Barriquello, Fábio de Lima Leite, Daiana Kotra Deda, Sérgio da Costa Saab, Nelson Consolin-Filho, Marcos Antonio Piza, Ladislau Martin-Neto
• Citations: 8 (Details)

• Detailed Analysis of Five Aspects Addressed to Minimize Costs and Waste in the Chemical Bath Deposition of CdS Films Using the CdB–AC₆H₅O₇–AOH–(NH₂)₂CS System, Materials Sciences and Applications, Vol.4 No.6, 2013
• J. A. García-Valenzuela, O. A. Castelo-González, M. R. Baez-Gaxiola, M. Sotelo-Lerma
• Citations: 8 (Details)

• Effects of Thermal Conditions in the Phase Formation of Undoped and Doped Pb(Zr_1-xTi_x)O₃ Solid Solutions, Materials Sciences and Applications, Vol.4 No.5, 2013
• Zelikha Necira, Ahmed Boutarfaia, Malika Abba, Hayet Menasra, Nora Abdessalem
• Citations: 8 (Details)

• Low Temperature Chlorination of Nd₂O₃ by Mechanochemical Method with CCl₄, Materials Sciences and Applications, Vol.4 No.7, 2013
• Takayuki Nagai, Shin-Ichi Kitawaki, Nobuaki Sato
• Citations: 8 (Details)

• Modeling of Orientation-Dependent Photoelastic Constants in Cubic Crystal System, Materials Sciences and Applications, Vol.5 No.4, 2014
• Lubna Jahan Rashid Pinky, Shakila Islam, Md. Nur Kutubul Alam, Mohammad Arif Hossain, Md. Rafiqul Islam
• Citations: 8 (Details)

• Application of Single Angle Turbidimetry on Coag-Flocculation Effect of Detarium microcarpum Seed in Brewery Effluent, Materials Sciences and Applications, Vol.5 No.6, 2014
• Bernard Ibezim Okolo, Patrick Chukwudi Nnaji, Matthew Chukwudi Menkiti, Victor Ifeanyi Ugonabo, Okechukwu Dominic Onukwuli
• Citations: 8 (Details)

• Irradiation Effect on Photodegradation of Pure and Plasticized Poly (4-Methylstyrene) in Solid Films, Materials Sciences and Applications, Vol.5 No.5, 2014
• Saria A. Al Safi, Thanaa M. Al Mouamin, Wadhah N. Al Sieadi, Khalid E. Al Ani
• Citations: 8 (Details)

• Effect of Corrosion Inhibitors in Limestone Cement, Materials Sciences and Applications, Vol.4 No.12A, 2013
• Evgenia Zacharopoulou, Aggeliki Zacharopoulou, Atteyeh Sayedalhosseini, George Batis, Sotirios Tsivilis
• Citations: 8 (Details)

• Structural and Magnetic Properties of Mn_0.50-xZn_0.50Cu_xFe₂O₄, Materials Sciences and Applications, Vol.4 No.12, 2013
• Farhad Alam, Mohammad H. R. Khan, Hari N. Das, Akther A. K. M. Hossain
• Citations: 7 (Details)

• Comparative Toxicity of “Tin Free” Self-Polishing Copolymer Antifouling Paints and Their Inhibitory Effects on Larval Development of a Non-Target Organism, Materials Sciences and Applications, Vol.5 No.3, 2014
• Jane Castritsi-Catharios, George Alambritis, Helen Miliou, Efthimia Cotou, George D. Zouganelis
• Citations: 7 (Details)

• Ultrafine Silica Additives Behavior during Alkali-Silica Reaction Long-Term Expansion Test, Materials Sciences and Applications, Vol.5 No.2, 2014
• Alexey Brykov, Mikhail Voronkov, Maxim Mokeev
• Citations: 7 (Details)

• Study on the Appearance and Peel Strength of Byakudan-Nuri Works, Materials Sciences and Applications, Vol.5 No.2, 2014
• Chieko Narita, Atsushi Endo, Yutaro Shimode, Kazushi Yamada
• Citations: 7 (Details)

• Scintillation Characteristics of CsI Crystal Doped Br under Gamma and Alpha Particles Excitation, Materials Sciences and Applications, Vol.5 No.6, 2014
• Maria da Conceição Costa Pereira, Tufic Madi Filho
• Citations: 7 (Details)

• Introduction of Compressive Residual Stress by Means of Cavitation Peening into a Titanium Alloy Rod Used for Spinal Implants, Materials Sciences and Applications, Vol.4 No.7B, 2013
• Osamu Takakuwa, Amrinder S. Gill, Gokul Ramakrishnan, Seetha R. Mannava, Vijay K. Vasudevan, Hitoshi Soyama
• Citations: 7 (Details)

• Nanocrystalline Mixed Oxides Containing Magnesium Prepared by a Combined Sol-Gel and Self-Combustion Method for Catalyst Applications, Materials Sciences and Applications, Vol.4 No.8, 2013
• Nicolae Rezlescu, Elena Rezlescu, Liliana Sachelarie, Paul Dorin Popa, Corneliu Doroftei, Maria Ignat
• Citations: 7 (Details)

• Enhanced Thermal Conductivity of Carbon Nanotube Arrays by Carbonizing Impregnated Phenolic Resins, Materials Sciences and Applications, Vol.4 No.8, 2013
• Dongmei Hu, Hongyuan Chen, Zhenzhong Yong, Minghai Chen, Xiaohua Zhang, Qingwen Li, Zhen Fan, Zhihai Feng
• Citations: 7 (Details)

• The Study of Different Structuring Techniques for Creation of Non-Evaporable Getters, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Anton Boyko, Dahir Gaev, Sergei Timoshenkov, Yuri Chaplygin, Vladimir Petrov
• Citations: 7 (Details)

• High Moisture Sensitivity of the Elements Based on Carbon Nanotubes Array, Materials Sciences and Applications, Vol.4 No.5A, 2013
• Sergei Bulyarsky, Vyacheslav Galperin, Levan Ichkitidze, Michael Ermakov, Alexander Pavlov, Yuri Shaman
• Citations: 7 (Details)

• Plastic Deformation Mechanisms of Base Material and Friction Stir Welded AZ31B-H24 Magnesium Alloy, Materials Sciences and Applications, Vol.4 No.6, 2013
• Michael Regev, Stefano Spigarelli
• Citations: 7 (Details)

• Thiomethyl Derivatives of Two Oligo(p-phenylene vinylenes) as New Aggregation-Induced Piezofluorochromic Emitters, Materials Sciences and Applications, Vol.4 No.6, 2013
• Xueqing Hou, Jing Ling, Navamoney Arulsamy, Jianqiang Huo
• Citations: 7 (Details)

• The Anti-Plasticization Effects of Dimethyl Carbonate Plasticizer in Poly (Methyl Metacrylate) Electrolyte Containing Rubber, Materials Sciences and Applications, Vol.4 No.11, 2013
• Famiza Latif, Madzlan Aziz
• Citations: 7 (Details)

• Comparison of Silicon Nitride Nanofibers Synthesized Using Silica Nanopowders and Silica Gel, Materials Sciences and Applications, Vol.3 No.8, 2012
• Sanket Deshmukh, Kei-Peng Jen, Sridhar Santhanam
• Citations: 7 (Details)

• Equal-Channel Angular Pressing as a New Processing to Control the Microstructure and Texture of Metallic Sheets, Materials Sciences and Applications, Vol.3 No.9, 2012
• Tong Xiao, Hiroyuki Miyamoto, Toshiyuki Uenoya
• Citations: 7 (Details)

• Probabilistic Analysis of Reinforced Concrete Carbonation Depth, Materials Sciences and Applications, Vol.4 No.3A, 2013
• Azhar Badaoui, M’hammed Badaoui, Fattoum Kharchi
• Citations: 7 (Details)

• PWA Doped SiO2 PEG Hybrid Materials of Class II, Materials Sciences and Applications, Vol.1 No.5, 2010
• S. Grandi, P. Mustarelli, A. Carollo, C. Tomasi, E. Quartarone, A. Magistris
• Citations: 7 (Details)

• Solvent-Induced Phase-Inversion and Electrical Actuation of Dielectric Copolymer Films, Materials Sciences and Applications, Vol.2 No.3, 2011
• Yeonju Jang, Toshihiro Hirai
• Citations: 7 (Details)

• Evaluation of Lignin-Calcium Complex as Thermal Stabilizer for Poly Vinyl Chloride, Materials Sciences and Applications, Vol.2 No.6, 2011
• Hussein Ali Shnawa
• Citations: 7 (Details)

• The Evaluation of Polyethylene/Clay Composite from Solid State NMR, Materials Sciences and Applications, Vol.2 No.5, 2011
• Regina F. Nogueira, Maria Inês B. Tavares, Rosane A. S. San Gil, Antônio G. Ferreira
• Citations: 7 (Details)

• EXAFS Studies of Ruthenium Based Double Perovskite ALaMnRuO₆ (A = Ca, Sr, Ba), Materials Sciences and Applications, Vol.3 No.1, 2012
• Rubina Shaheen, Javaid Bashir, Muhammad Nasir Khan
• Citations: 7 (Details)

• Studies of Preparation and Characteristics in Borosilicate Photosensitive Glass-Ceramics, Materials Sciences and Applications, Vol.3 No.2, 2012
• Tao Zheng, Xin Xu, Jingsheng Pan, Shengchun Xiao, Jingwen Lv
• Citations: 7 (Details)

• Outstanding Impact Resistance of Post-Consumer HDPE/Multilayer Packaging Composites, Materials Sciences and Applications, Vol.8 No.1, 2017
• Silvia Luciana Favaro, Antonio Guilherme Basso Pereira, Janaina Rodrigues Fernandes, Orlando Baron, Cleiser Thiago Pereira da Silva, Murilo Pereira Moisés, Eduardo Radovanovic
• Citations: 7 (Details)

• Icosahedral Quasicrystal Layer Observed on λ Phase in Al-Cu-Fe Alloy, Materials Sciences and Applications, Vol.8 No.7, 2017
• Andrew Baker, Matthew Caputo, Helen Hampikian, Luke Simpson, Chunfei Li
• Citations: 7 (Details)

• Anatomical Properties of Three Lesser Utilised Ghanaian Hardwood Species, Materials Sciences and Applications, Vol.6 No.12, 2015
• Gladys A. Quartey
• Citations: 7 (Details)

• Characterization of Isotactic Polypropylene/Talc Composites Prepared by Extrusion Cum Compression Molding Technique, Materials Sciences and Applications, Vol.6 No.11, 2015
• Rahima Nasrin, M. A. Gafur, A. H. Bhuiyan
• Citations: 7 (Details)

• Effect of Corrosion Inhibitor Used in Surface Treatment on the Anticorrosive Performance of an Epoxy Paint System, Materials Sciences and Applications, Vol.7 No.10, 2016
• Jorge Felipe Ramos Pontes, Elber Vidigal Bendinelli, Cristina da Costa Amorim, Marcos Martins de Sá, Alberto Pires Ordine
• Citations: 7 (Details)

• Thermomechanical Behavior Modeling of a Cr-Ni-Mo-Mn-N Austenitic Stainless Steel, Materials Sciences and Applications, Vol.7 No.12, 2016
• Rafael P. Ferreira, Eden S. Silva, Carmem C. F. Nascimento, Samuel F. Rodrigues, Clodualdo Aranas Jr., Valdemar S. Leal, Gedeon S. Reis
• Citations: 7 (Details)

• Indonesia’s Local Material Effect in Clay-Based Ceramic Filter Fabrication as an Alternative for Liquid Radioactive Waste Processing Material, Materials Sciences and Applications, Vol.7 No.7, 2016
• Widya Rosita, Ferdiansjah  , Antonius Wisnu Yogha Pamungkas, Tri Joko Prihatin
• Citations: 7 (Details)

• Kinetic Study of the Effect of Plasticization on Photodegradation of Polystyrene Solid Films, Materials Sciences and Applications, Vol.6 No.7, 2015
• Khalid E. Al Ani, Afrah Essa Ramadhan
• Citations: 7 (Details)

• Piezoelectric Vibration Harvesters Based on Vibrations of Cantilevered Bimorphs: A Review, Materials Sciences and Applications, Vol.6 No.9, 2015
• Anam Khalid, Amit Kumar Redhewal, Manoj Kumar, Anupam Srivastav
• Citations: 7 (Details)

• Fabrication of Erbium and Ytterbium Co-Doped Tantalum-Oxide Thin Films Using Radio-Frequency Co-Sputtering, Materials Sciences and Applications, Vol.6 No.5, 2015
• Kenta Miura, Yuki Arai, Kazusa Kano, Osamu Hanaizumi
• Citations: 7 (Details)

• Effect of Annealing Temperature on Prepared Nanoparticles Li-Ferrite Using Positron Annihilation Lifetime Technique, Materials Sciences and Applications, Vol.6 No.5, 2015
• A. M. Samy, E. Hassan Aly
• Citations: 7 (Details)

• Mathematical Modeling and Experimental Validation of Mixed Metal Oxide Thin Film Deposition by Spray Pyrolysis, Materials Sciences and Applications, Vol.6 No.1, 2015
• S. M. Navid Khatami, Olusegun J. Ilegbusi, Leonid I. Trakhtenberg
• Citations: 7 (Details)

• Characterization of the A6060 Al Alloy Mainly by Using the Micro-Hardness Vickers Test in Order to Optimize the Industrial Solutionizing Conditions of the As-Cast Billets, Materials Sciences and Applications, Vol.6 No.1, 2015
• G. K. Triantafyllidis, I. Kiligaridis, D. I. Zagkliveris, I. Orfanou, S. Spyridopoulou, E. Mitoudi-Vagourdi, S. Semertzidou
• Citations: 7 (Details)

• A Comparison of Optical Properties of CuO and Cu₂O Thin Films for Solar Cell Applications, Materials Sciences and Applications, Vol.12 No.7, 2021
• Radu Bunea, Ashwin Kumar Saikumar, Kalpathy Sundaram
• Citations: 7 (Details)

• Preparation and Characterization of Magnetic Banana Peels Biochar for Fenton Degradation of Methylene Blue, Materials Sciences and Applications, Vol.11 No.6, 2020
• Eric Sakué Ngankam, Lemankreo Dai-Yang, Baissassou Debina, Abdellaziz Baçaoui, Abdelrani Yaacoubi, Abdoul Ntieche Rahman
• Citations: 7 (Details)

• The Inspection of Spheroidized Annealing on SCM435 Cold-Forging Quality Steel Wires with Protective Atmosphere, Materials Sciences and Applications, Vol.10 No.11, 2019
• Chih-Cheng Yang, Nan-Hua Lu
• Citations: 7 (Details)

• Influence of the Distribution of Excess Carbide on the Properties of Genuine Damascus Steel, Materials Sciences and Applications, Vol.10 No.2, 2019
• Dmitry Sukhanov, Nataliya Plotnikova
• Citations: 7 (Details)

• Characteristics of the CsI:Tl Scintillator Crystal for X-Ray Imaging Applications, Materials Sciences and Applications, Vol.9 No.2, 2018
• Maria da Conceição Costa Pereira, Tufic Madi Filho, José Roberto Berretta, Carlos Henrique de Mesquita
• Citations: 7 (Details)

• Improved Approach to Determine the Material Parameters for a Combined Hardening Model, Materials Sciences and Applications, Vol.9 No.4, 2018
• Benjamin Seisenbacher, Gerhard Winter, Florian Grün
• Citations: 7 (Details)

• Corrosion Pattern of Pipeline Steel in Petroleum Pipeline Water in the Presence of Biomas Derived Extracts of Brassica oleracea and Citrus paradise Mesocarp, Materials Sciences and Applications, Vol.9 No.1, 2018
• Nnaemeka Chinedu Ngobiri, Kaine Okorosaye-Orubite
• Citations: 7 (Details)

• Preparation and Properties of Copper Fine Wire on Polyimide Film in Air by Laser Irradiation and Mixed-Copper-Complex Solution Containing Glyoxylic Acid Copper Complex and Methylamine Copper Complex, Materials Sciences and Applications, Vol.9 No.11, 2018
• Tomoji Ohishi, Naoki Takahashi
• Citations: 7 (Details)

• Electrical Behaviour and Spherulites Morphology of HDPE/PP Polyblends with HDPE as Base Material, Materials Sciences and Applications, Vol.9 No.10, 2018
• Prakash Chandra Sahoo, Rabiranjan Murmu, Sarat Chandra Patra, Chiranjit Dutta, Harekrushna Sutar
• Citations: 6 (Details)

• Thermomechanical Characterisation of Compressed Clay Bricks Reinforced by Thatch Fibres for the Optimal Use in Building, Materials Sciences and Applications, Vol.9 No.12, 2018
• Madeleine Nitcheu, Pierre Meukam, Jean Claude Damfeu, Donatien Njomo
• Citations: 6 (Details)

• Structural Changes in Human Teeth after Heating up to 1200°C in Argon Atmosphere, Materials Sciences and Applications, Vol.9 No.7, 2018
• Nancy Vargas-Becerril, Ramiro García-García, José Reyes-Gasga
• Citations: 6 (Details)

• Black Photoresist for Patterning Pixel Define Layer of Organic Light Emitting Diode with Polyimide as Thermal Stabilizer, Materials Sciences and Applications, Vol.9 No.6, 2018
• Genggongwo Shi, Jin Woo Park, Lee Soon Park
• Citations: 6 (Details)

• Reclamation of Lithium Cobalt Oxide from Waste Lithium Ion Batteries to Be Used as Recycled Active Cathode Materials, Materials Sciences and Applications, Vol.9 No.1, 2018
• Rakibul Qadir, Fahmida Gulshan
• Citations: 6 (Details)

• Properties of Recycled-Polyethylene Terephthalate/Polycarbonate Blend Fabricated by Vented Barrel Injection Molding, Materials Sciences and Applications, Vol.9 No.1, 2018
• Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Takanori Negoro
• Citations: 6 (Details)

• Artificial Enamel Wear after Prolonged Chewing Simulation against Monolithic Y-TZP Crowns, Materials Sciences and Applications, Vol.9 No.4, 2018
• Deborah Vedana, Leonardo Vedana, Emerson Alves Martins, Peter Brodersen, Grace M. De Souza
• Citations: 6 (Details)

• Peculiar Set-Retarding Effect of Miserly Amounts of Pyrocatechol on Calcium Aluminate Cement Hydration, Materials Sciences and Applications, Vol.9 No.5, 2018
• Alexey Brykov, Mikhail Voronkov, Olga Nekrasova, Maxim Mokeev
• Citations: 6 (Details)

• Modification in Cu-Zn Alloy Properties by 2 MeV Ni⁺ Ions Irradiation, Materials Sciences and Applications, Vol.9 No.3, 2018
• Shahbaz Ahmad, Shazia Bashir, Daniel Yousaf, Mian Ahsan Ali
• Citations: 6 (Details)

• Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films, Materials Sciences and Applications, Vol.10 No.3, 2019
• Chavin Jongwannasiri, Satoshi Yoshida, Shuichi Watanabe
• Citations: 6 (Details)

• How Polydopamine Modulates Biological Responses to PTFE Prostheses, Materials Sciences and Applications, Vol.10 No.5, 2019
• Isabelle Talon, Anne Schneider, Eric Mathieu, Bernard Senger, Benoit Frisch, Cendrine Seguin, Vincent Ball, Joseph Hemmerlé
• Citations: 6 (Details)

• Effect of Ti⁴⁺ Doping on Structural, Electrical and Magnetic Properties of Ni_0.4Cu_0.2Zn_0.4Fe_2-xTi_xO₄ Ferrites, Materials Sciences and Applications, Vol.10 No.12, 2019
• Sajal Chandra Mazumdar, Farhad Alam, Umma Habiba Tanni, Kamrunnahar Kali, Bablu Chandra Das, Mohammed Nazrul Islam Khan
• Citations: 6 (Details)

• Electrochemical Degradation Mechanism of a Cermet Anode for Aluminum Production, Materials Sciences and Applications, Vol.10 No.9, 2019
• P. Meyer, L. Massot, M. Gibilaro, S. Bouvet, V. Laurent, A. Marmottant, P. Chamelot
• Citations: 6 (Details)

• Co-Doped Rare-Earth (La, Pr) and Co-Al Substituted M-Type Strontium Hexaferrite: Structural, Magnetic, and Mossbauer Spectroscopy Study, Materials Sciences and Applications, Vol.11 No.7, 2020
• Madhav L. Ghimire, Dom L. Kunwar, Jiba N. Dahal, Dipesh Neupane, Sunghyun Yoon, Sanjay R. Mishra
• Citations: 6 (Details)

• Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites, Materials Sciences and Applications, Vol.11 No.9, 2020
• Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed
• Citations: 6 (Details)

• Heat-Resistant Properties of a SiO₂-Coated PET Film Prepared by Irradiating a Polysilazane-Coated Film with Excimer Light, Materials Sciences and Applications, Vol.11 No.1, 2020
• Tomoji Ohishi, Kousei Ichikawa, Satoki Isono
• Citations: 6 (Details)

• Improvement in Surface Roughness and Hardness for Carbon Steel by Slide Burnishing Process, Materials Sciences and Applications, Vol.12 No.5, 2021
• Hirotaka Kato, Wataru Hirokawa, Yoshikazu Todaka, Kazufumi Yasunaga
• Citations: 6 (Details)

• Hydrogen Solubility in Liquid and Solid Pure Aluminum—Critical Review of Measurement Methodologies and Reported Values, Materials Sciences and Applications, Vol.13 No.4, 2022
• Prince N. Anyalebechi
• Citations: 6 (Details)

• Binary Relations between Magnitudes of Different Dimensions Used in Material Science Optimization Problems Pseudo-State Equation of Soft Magnetic Composites, Materials Sciences and Applications, Vol.5 No.14, 2014
• Krzysztof Z. Sokalski, Bartosz Jankowski, Barbara Ślusarek
• Citations: 6 (Details)

• On the Temperature Dependent Excitation and Reflection Spectra of Ln₃Al₅O₁₂:Ce³⁺ Ceramics (Ln = Y, Lu) for White LEDs, Materials Sciences and Applications, Vol.5 No.14, 2014
• Thomas Jansen, Thomas Jüstel
• Citations: 6 (Details)

• Zr-Ti-Ni-Cu Amorphous Brazing Fillers Applied to Brazing Titanium TA2 and Q235 Steel, Materials Sciences and Applications, Vol.5 No.11, 2014
• Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye
• Citations: 6 (Details)

• On the Definition of State Variables for an Internal State Variable Constitutive Model Describing Metal Deformation, Materials Sciences and Applications, Vol.5 No.8, 2014
• Paul S. Follansbee
• Citations: 6 (Details)

• Optical Properties of Tetrahedral Amorphous Carbon Films and Their Potential for Lab-on-a-Chip, Materials Sciences and Applications, Vol.6 No.5, 2015
• Katja Guenther, Frank Sonntag, Teja Roch, Andrés Fabián Lasagni
• Citations: 6 (Details)

• Determination of Some Physical and Mechanical Properties of the Wood-Based Panels Modified by Acrylic Textile Fiber, Materials Sciences and Applications, Vol.6 No.6, 2015
• Mustafa Altunok, Ihsan Kureli, Mehlika Pulat
• Citations: 6 (Details)

• Structure Evolution in Austenitic Stainless Steels—A State Variable Model Assessment, Materials Sciences and Applications, Vol.6 No.6, 2015
• Paul S. Follansbee
• Citations: 6 (Details)

• Electrochemical and Photoelectrochemical Properties of Nano-Islands of Zinc and Niobium Oxides Deposited on Aluminum Thin Film by RF Magnetron Reactive Sputtering, Materials Sciences and Applications, Vol.6 No.4, 2015
• Go Sajiki, Yasuhiko Benino, Tokuro Nanba, Hiroshi Okano
• Citations: 6 (Details)

• Influence of Organoclay Structure on Nanostructured Materials Based on Eva, Materials Sciences and Applications, Vol.6 No.10, 2015
• Gisele C. V. Iulianelli, Pedro José Oliveira Sebastião, Maria Inês B. Tavares, Fernanda Abbate dos Santos
• Citations: 6 (Details)

• Nonlinear Bending of Piezoelectric Cylindrical Shell Reinforced with BNNTs under Electro-Thermo-Mechanical Loadings, Materials Sciences and Applications, Vol.6 No.8, 2015
• Jinhua Yang, Pengjun Zhang
• Citations: 6 (Details)

• Effect of Bismuth Addition on Structure and Mechanical Properties of Tin-9Zinc Soldering Alloy, Materials Sciences and Applications, Vol.6 No.9, 2015
• Muhommad Abdul Wadud, M. A. Gafur, Md. Rakibul Qadir, Mohammad Obaidur Rahman
• Citations: 6 (Details)

• Fabrication, Microstructure, Thermal and Electrical Properties of Copper Heat Sink Composites, Materials Sciences and Applications, Vol.7 No.9, 2016
• Walid Daoush, Ahmed Swidan, Gamal Abd El-Aziz, Mohamed Abdelhalim
• Citations: 6 (Details)

• Corrosion Protection of Iron Alloy Using Peganum harmala Extract as Inhibitor in Acidic Solution, Materials Sciences and Applications, Vol.6 No.11, 2015
• Khulood Abid Al-Saadie, Hayfaa Ameer Abas, Haider Abdulkareem Yousif Almashhdani
• Citations: 6 (Details)

• Sliding Wear Performance Evaluation of Red Mud (RM), RM + Fly Ash (FA) and RM + FA + Al Coatings on Mild Steel, Materials Sciences and Applications, Vol.7 No.3, 2016
• Harekrushna Sutar, Debashis Roy, Subash Chandra Mishra, Rabi Ranjan Murmu
• Citations: 6 (Details)

• The Influence of Organo-Clay Ratio in the HIPS-OMMT Nanocomposites Analyzed by Proton Spin-Lattice and Spin-Spin Relaxation Times, Materials Sciences and Applications, Vol.7 No.3, 2016
• Paulo Sérgio Rangel Cruz da Silva, Lívia Rodrigues Menezes, Maria Inês Bruno Tavares
• Citations: 6 (Details)

• Characterization of Tannin-Based Resins from the Barks of Ficus platyphylla and of Vitellaria paradoxa: Composites’ Performances and Applications, Materials Sciences and Applications, Vol.8 No.12, 2017
• Richard Ntenga, Frederic Djoda Pagore, Antonio Pizzi, Etienne Mfoumou, Louis-Max Ayina Ohandja
• Citations: 6 (Details)

• Study on the Role of Supersonic Nozzle in Fiber Laser Cutting of Stainless Steel, Materials Sciences and Applications, Vol.8 No.1, 2017
• Yijun Zhou, Jilan Kong, Jin Zhang
• Citations: 6 (Details)

• The Influence of Surface Conditioning of Ceramic Restorations before Metal Bracket Bonding, Materials Sciences and Applications, Vol.3 No.1, 2012
• Andreas Faltermeier, Piero Roemer, Claudia Reicheneder, Peter Proff, Thomas Klinke
• Citations: 6 (Details)

• Concentration of Bio-Ethanol through Cellulose Ester Membranes during Temperature-Difference Controlled Evapomeation, Materials Sciences and Applications, Vol.2 No.10, 2011
• Tadashi Uragami
• Citations: 6 (Details)

• Significance of Alloying Element Levels in Realizing the Specified Tensile Properties in 18 Wt % Nickel Maraging Steel, Materials Sciences and Applications, Vol.2 No.8, 2011
• Muktinutalapati Nageswara Rao, Krishnan Sivasubramanian
• Citations: 6 (Details)

• Application of Statistical Design Strategies to Optimize the Preparation of Cuo Nanoparticles by Hydrothermal Technique, Materials Sciences and Applications, Vol.2 No.8, 2011
• Reda Mohamed, Ibreheem Mkhalid, Elham Azaam
• Citations: 6 (Details)

• New Insight into the Graphene Based Films Prepared from Carbon Fibers, Materials Sciences and Applications, Vol.2 No.7, 2011
• Yan-Xiang Wang, Wen-Xin Fan, Guo-Li Wang, Min-Xia Ji
• Citations: 6 (Details)

• Low Temperature Gas Sensing Coatings Made Through Wet Chemical Deposition of Niobium Doped Titanium Oxide Colloid, Materials Sciences and Applications, Vol.2 No.4, 2011
• Naji Al Dahoudi
• Citations: 6 (Details)

• Electro-Optical Properties of Carbon Nanotubes Obtained by High Density Plasma Chemical Vapor Deposition, Materials Sciences and Applications, Vol.2 No.5, 2011
• Ronaldo D. Mansano, Ana Paula Mousinho
• Citations: 6 (Details)

• Nanosensitive Silicon Microprobes for Mechanical Detection and Measurements, Materials Sciences and Applications, Vol.2 No.6, 2011
• Jan M Łysko, Piotr Dumania, Paweł Janus, Mirosław Grodner, Helena Kłos, Karina Skwara, Piotr Grabiec
• Citations: 6 (Details)

• Preparation of Star-Shaped Polylactic Acid Drug Carrier Nanoparticles, Materials Sciences and Applications, Vol.1 No.1, 2010
• Michele Marini
• Citations: 6 (Details)

• Microstructure and Dielectric Properties of Bi Substituted PLZMST Ceramics, Materials Sciences and Applications, Vol.4 No.5, 2013
• Hayet Menasra, Zelikha Necira, Karima Bouneb, Abdelhak Maklid, Ahmed Boutarfaia
• Citations: 6 (Details)

• The Influence of Welding Parameters on Brittle Fracture of Liquefied Natural Gas Storage Tank Welded Joint, Materials Sciences and Applications, Vol.4 No.3, 2013
• Abd El Fattah Mustafa Khourshid, Mohamed Ahmed Ghanem
• Citations: 6 (Details)

• Effect for Inhomogeneity by Pb Substitution on (Bi_1-yPb_y)₂Sr₂Ca_1-xY_xCu₂O_8+δSingle Crystals, Materials Sciences and Applications, Vol.3 No.12, 2012
• S. Komaki, Y. Kourogi, T. Murano, A. Furushima, S. Maeda, Y. Sawada, B. Saya, Q. T. Meng, T. Tsuneoka, F. Ichikawa, K. Itoh
• Citations: 6 (Details)

• Tribological Behavior of Stellite 720 Coating under Block-on-Ring Wear Test, Materials Sciences and Applications, Vol.3 No.11, 2012
• Rong Liu, Qi Yang, Feng Gao
• Citations: 6 (Details)

• PET Oligomer Waste to Modify CAP Characteristics, Materials Sciences and Applications, Vol.3 No.8, 2012
• L. C. Mendes, M. L. Dias, P. S. C. Pereira, L. M. R. Albuquerque
• Citations: 6 (Details)

• Structural and Optical Properties of Zn_x-1Mg_xO Ceramic Composites, Materials Sciences and Applications, Vol.3 No.8, 2012
• Zayani Jaafar Othman, Adel Matoussi
• Citations: 6 (Details)

• Influence of Thermomecaniques Treatments on the Proprietes of Al-5.8%Zn-2.7%Mg Alloy, Materials Sciences and Applications, Vol.3 No.8, 2012
• Mazouz Hamoudi, Bensaada Said, Mohamed Tewfik Bouziane
• Citations: 6 (Details)

• Conical Structures on Acrylic Intraocular Lens (IOLs) Materials after 193-nm Excimer Laser Ablation, Materials Sciences and Applications, Vol.3 No.6, 2012
• Ellas Spyratou, Mersini Makropoulou, Dionisia Tsoutsi, George Zoulinakis, Constantinos Bacharis, Ioannis Asproudis, Alexander Serafetinides
• Citations: 6 (Details)

• Synthesis of High-Density Vertically Aligned Carbon Nanotubes Using Ultrasonic Nebulizer, Materials Sciences and Applications, Vol.3 No.4, 2012
• Jianhui Zhang, Wei Li, Tetsuo Soga, Takashi Jimbo, Takayoshi Tanji
• Citations: 6 (Details)

• Microstructure Evolution of W-Cu Alloy Wire, Materials Sciences and Applications, Vol.3 No.3, 2012
• Fei Shao, Wenge Chen, Hui Zhang, Bingjun Ding
• Citations: 6 (Details)

• Synthesis and Electrical Analysis of Ba₅GdTi₃V₇O₃₀ Ceramics, Materials Sciences and Applications, Vol.3 No.3, 2012
• Bana B. Mohanty, Priyadarshini S. Sahoo, Mahapatra P. K. Sahoo, Ram N. P. Choudhary
• Citations: 6 (Details)

• Synthesis and Application of Oil-Soluble Red Dyes Derived from p-n-Alkyl Aniline, Materials Sciences and Applications, Vol.5 No.8, 2014
• Yi-Fen Chiang, Yu-Chou Chao
• Citations: 6 (Details)

• Effects of Heat Treatment on Microhardness of Some Al-Cu Alloy Prepared by Vacuum Coating, Materials Sciences and Applications, Vol.5 No.8, 2014
• Safdar Habibi, Babak Jaleh, Amir Namdarmanesh, Mojtaba Shamlo
• Citations: 6 (Details)

• Curvature, Hybridization and Contamination of Carbon Nanostructures Analysis Using Electron Microscopy and XANES Spectroscopy, Materials Sciences and Applications, Vol.5 No.2, 2014
• Rolant Eba Medjo, Bridinette Thiodjio Sendja, Jeannot Mane Mane
• Citations: 6 (Details)

• Evaluation of the Antimicrobial Activity of Stryphnodendron barbatiman against Citrobacter freundii, Materials Sciences and Applications, Vol.4 No.12, 2013
• Nara C. de Souza, Marcio N. Gomes, Rafael R. G. Maciel, Romário J. da Silva, Tarquin F. Trescher, Filipe D. S. Gorza, Graciela C. Pedro, Kennedy C. S. Correa, Marcio C. R. Souza, Josmary R. Silva
• Citations: 6 (Details)

• 3D Braided Material Based on Space Group R3 Symmetry, Materials Sciences and Applications, Vol.4 No.12, 2013
• Wensuo Ma, Dongdong Yin
• Citations: 5 (Details)

• MD Simulated Microstructure of Liquid Sodium Alloyed with Lead, Materials Sciences and Applications, Vol.5 No.8, 2014
• Inessa Yu. Shimkevich, Alexander L. Shimkevich
• Citations: 5 (Details)

• Characterization and Valorization of Two Algerian Bentonites in the Waterproofing Systems, Materials Sciences and Applications, Vol.5 No.5, 2014
• Messaouda Debieche, Farid Kaoua
• Citations: 5 (Details)

• Electro-Deposition of Cu on Open Cell Aluminum Foams, Materials Sciences and Applications, Vol.4 No.11, 2013
• A. Antenucci, S. Guarino, V. Tagliaferri, N. Ucciardello
• Citations: 5 (Details)

• Barrier, Adsorptive, and Mechanical Properties of Containers Molded from PET/PP Blends for Use in Pharmaceutical Solutions, Materials Sciences and Applications, Vol.4 No.10, 2013
• Tadashi Otsuka, Ayako Kurosawa, Masaki Maeda, Kazushi Yamada, Masuo Murakami, Hiroyuki Hamada
• Citations: 5 (Details)

• Microstructural Investigation of PM-355 Nuclear Track Detector Subjected to Low-Dose Gamma Irradiation: A Positron Annihilation Lifetime Study, Materials Sciences and Applications, Vol.4 No.10, 2013
• Emad Hassan Aly
• Citations: 5 (Details)

• Self-Organizing Processes in Semiconductor Materials Science on the Example of Nanostructuring of por-Si, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Kurbangali B. Tynyshtykbaev, Talant Aitmukan, Ainur T. Issova, Bagdat A. Rakhymetov, Mukhtar A. Yeleuov, Serekbol Zh. Tokmoldin
• Citations: 5 (Details)

• Photoelectrochemical and Spectroscopic Studies of Colloidal Nano-Particles of Mixed TiO₂/V₂O₅ Metal-Oxide Semiconductors, Materials Sciences and Applications, Vol.3 No.5, 2012
• Kasem K. Kasem, Aubrey Finley, James Folberth, Maarij Syed, Elaine Kirkpatrick
• Citations: 5 (Details)

• Surface Photografting of Novel Sulfobetaine Copolymers on Silica, Materials Sciences and Applications, Vol.3 No.7, 2012
• Abhishek Kumar, Nazia Tarannum, Meenakshi Singh
• Citations: 5 (Details)

• The Influence Factors Analysis to Improve the Compatibility and the Mechanical Behavior of IPN, Gradient IPN and BaTiO₃ Filled IPN, Materials Sciences and Applications, Vol.3 No.9, 2012
• Yudi Guo, Dongyan Tang, Ying Wang
• Citations: 5 (Details)

• Influence of the Fluoride Atoms Doping on the FeSe Superconductor, Materials Sciences and Applications, Vol.3 No.9, 2012
• A. D. Bortolozo, A. D. Gueiros, L. M. S. Alves, C. A. M. dos Santos
• Citations: 5 (Details)

• Enhancement of TiB Grain Refining Effect on A356 Gravity Die Casting with the Addition of Yttrium, Materials Sciences and Applications, Vol.3 No.10, 2012
• Lim Ying Pio, Wang Chan Chin
• Citations: 5 (Details)

• Spectral Investigations of Kiton Red-620 Doped Polymethylmethacrylate, Materials Sciences and Applications, Vol.3 No.10, 2012
• Monika Chahar, Vazid Ali, Sushil Kumar
• Citations: 5 (Details)

• Bulk Composite Nanomaterial with Multiwall Carbon Nanotubes, Materials Sciences and Applications, Vol.3 No.10, 2012
• Levan Ichkitidze, Vitally Podgaetsky, Alexander Prihodko, Sergei Selishchev, Eugenie Blagov, Vyacheslav Galperin, Yuri Shaman, Lyudmila Tabulina
• Citations: 5 (Details)

• Effect of Sub-Grains and Crystal Defects on Monolike Si Solar Cell Performance, Materials Sciences and Applications, Vol.4 No.2, 2013
• Chris Yang, Hao Wu, Ian Cooper
• Citations: 5 (Details)

• Removal of Aqueous Lead and Copper Ions by Using Natural Hydroxyapatite Powder and Sulphide Precipitation in Cyanidation Process, Materials Sciences and Applications, Vol.4 No.4, 2013
• José Refugio Parga, Jesús Leobardo Valenzuela, Víctor Vazquez, Mario Rodriguez, Héctor Moreno
• Citations: 5 (Details)

• Photochemical Properties of Precipitated Solid Aerosol Produced by Burning of Titanium Microparticles under Ambient Air, Materials Sciences and Applications, Vol.1 No.2, 2010
• Valery Zakharenko, Sophia Khromova
• Citations: 5 (Details)

• Provitamin D Doped Silica and Polymeric Films: New Materials for UV Biosensor, Materials Sciences and Applications, Vol.1 No.5, 2010
• T. N. Orlova, I. P. Terenetskaya, A. M. Eremenko, N. I. Surovtseva
• Citations: 5 (Details)

• Facile Synthesis of Polypyrrole/Titanate Core-Shell Nanorods and Their Electrorheological Characteristics, Materials Sciences and Applications, Vol.2 No.2, 2011
• Jiexu Zhang, Ying He, Lijun Ji
• Citations: 5 (Details)

• Activated Carbons Containing Dispersed Metal Oxide Particles for Removal of Methyl Mercaptan in Air, Materials Sciences and Applications, Vol.2 No.1, 2011
• Hisashi Tamai, Miki Nakamori, Masayoshi Nishikawa, Takeshi Shiono
• Citations: 5 (Details)

• Activation Volume of Secondary Relaxation, Materials Sciences and Applications, Vol.2 No.6, 2011
• Soheil Sharifi
• Citations: 5 (Details)

• Contribution to a Comparative Study of the Corrosion Inhibiting Effect of Some Azoles, to Protect the Cu70-30Ni Alloy in Aerated NaCl 3% in Presence of Ammonia, Materials Sciences and Applications, Vol.2 No.4, 2011
• Mohammed Benmessaoud, Karima Es-Salah, Ahmed Kabouri, Najjat Hajjaji, Hisai Takenouti, Abdelah Srhiri
• Citations: 5 (Details)

• Discontinuous Precipitation and Dissolution in Cu-4, 6 at% In Alloy under the Effect of Plastic Deformation and the Temperature, Materials Sciences and Applications, Vol.2 No.10, 2011
• Said Bensaada, Hamoudi Mazouz, Mohamed Tewfik Bouziane
• Citations: 5 (Details)

• Structure and Bonding of Nanolayered Ternary Phosphides, Materials Sciences and Applications, Vol.2 No.10, 2011
• Abdelkader Yakoubi, Hanane Mebtouche, Mohamed Ameri, Bachir Bouhafs
• Citations: 5 (Details)

• Effect of PEDOT:PSS Layer and ITO Ozonization in Arylenevinylene-co-Pyrrolenevinylene (AVPV) Based Solar Cell Devices, Materials Sciences and Applications, Vol.2 No.12, 2011
• Ankur Solanki, S. Sundar Kumar Iyer, Ashish Garg
• Citations: 5 (Details)

• The Effect of Tin on PECVD-Deposited Germanium Sulfide Thin Films for Resistive RAM Devices, Materials Sciences and Applications, Vol.8 No.2, 2017
• Rene Rodriguez, Benjamin Poulter, Mateo Gonzalez, Fadil Ali, Lisa D. Lau, McKenzie Mangun
• Citations: 5 (Details)

• Optimization Study of the Removal of Atrazine from Aqueous Solution on to Composite Activated Carbon-Silver Using Response Surface Methodology, Materials Sciences and Applications, Vol.8 No.3, 2017
• Nkwaju Yanou Rachel, Baçaoui Abdelaziz, Kouotou Daouda, Ndi Nsami Julius, Dammi Djimi Estelle Gaelle, Yaacoubi Abdelrani, Louarrat Mehdi, Ketcha Mbadcam Joseph
• Citations: 5 (Details)

• Physical and Mechanical Properties of Antifungal Ionic Liquid-Incorporated Dental Tissue Conditioner, Materials Sciences and Applications, Vol.8 No.5, 2017
• Kavita Kanjanamekanant, Nareudee Limpuangthip, Mansuang Arksornnukit
• Citations: 5 (Details)

• Molecular Dynamics Simulation of Grain Refinement in a Polycrystalline Material under Severe Compressive Deformation, Materials Sciences and Applications, Vol.8 No.12, 2017
• Takuya Uehara
• Citations: 5 (Details)

• Formation of Eutectic Carbides in the Structure of High-Purity White Cast Iron in the Forging Process, Materials Sciences and Applications, Vol.8 No.5, 2017
• D. A. Sukhanov, L. B. Arkhangelsky
• Citations: 5 (Details)

• CVD Treatment of Carbon Fibers and Evaluation of Their Dispersion in CFRC, Materials Sciences and Applications, Vol.8 No.8, 2017
• Chuang Wang, Bingliang Li, Lei Peng, Wenmin He, Liping Zhao, Kezhi Li
• Citations: 5 (Details)

• Mechanical and Microstructural Evaluation of Plastically Deformed Brass, Materials Sciences and Applications, Vol.6 No.12, 2015
• Muideen Adebayo Bodude, Ibrahim Momohjimoh, Ruth Nkiruka Nnaji
• Citations: 5 (Details)

• Synthesis and Characterization of Advanced Red Mud and MWCNTs Based EMI Shielding Material via Ceramic Processing, Materials Sciences and Applications, Vol.7 No.4, 2016
• Sarika Verma, Sudhir Sitaram Amritphale, Satyabrata Das
• Citations: 5 (Details)

• Weibull Statistics Strength Investigation of Synthetic Link Chains Made from Ultra-Strong Polyethylene Fibers, Materials Sciences and Applications, Vol.7 No.5, 2016
• Roel Marissen, Dietrich Wienke, René Homminga, Rigo Bosman, Kjell Magne Veka, Anna Huguet
• Citations: 5 (Details)

• The Effect of Microstructural and Geometric Inhomogeneities Induced by Laser for Forming Strain Analysis on Sheet Metal Formability, Materials Sciences and Applications, Vol.7 No.5, 2016
• Sergey Guk, Daria Plotnikova, Rudolf Kawalla
• Citations: 5 (Details)

• Effect of Retrogression and Reaging on Stress Corrosion Cracking of Spray Formed Al Alloy, Materials Sciences and Applications, Vol.7 No.1, 2016
• Ruiming Su, Yingdong Qu, Xiang Li, Junhua You, Rongde Li
• Citations: 5 (Details)

• Rapid and Continuous Extraction of Methyl Red from Wastewater Using Counter Current Chromatography, Materials Sciences and Applications, Vol.7 No.6, 2016
• Nasrin Adli, Azam Azimvand, Zinolabedin. Bashiri Sadr, Moharam Moharamzadeh, Hossein Salar Amoli
• Citations: 5 (Details)

• First Principles Study of the Structural and Electronic Properties of the ZnO/Cu₂O Heterojunction, Materials Sciences and Applications, Vol.6 No.7, 2015
• Mabrouk Zemzemi, Sahbi Alaya
• Citations: 5 (Details)

• Observation of Blue-Light Emission Band from Eu-Doped Ta₂O₅ Thin Films Prepared Using Co-Sputtering, Materials Sciences and Applications, Vol.6 No.7, 2015
• Kenta Miura, Yuki Arai, Osamu Hanaizumi
• Citations: 5 (Details)

• Numerical Simulation of Microstructural Evolution via Phase-Field Model Coupled to the Solutal Interaction Mechanism, Materials Sciences and Applications, Vol.6 No.10, 2015
• Alexandre Furtado Ferreira, Ingrid Meirelles Salvino Tomaskewski, Késsia Gomes Paradela, Dimas Moraes da Silva, Roberto Carlos Sales
• Citations: 5 (Details)

• Measure the Bulk Etch Rate Using the Time-Diameter Method, Materials Sciences and Applications, Vol.6 No.4, 2015
• Hussein A. Ahmed, Alan S. Said Ahmad, Ari A. Mohammed
• Citations: 5 (Details)

• Theoretical Investigation of X-Ray Absorption near Edge Spectroscopy (XANES) Angular Dependence of Aligned Carbon Nanotubes Grown by DC HF CVD Process, Materials Sciences and Applications, Vol.6 No.5, 2015
• Bridinette Thiodjio Sendja, Rolant Eba Medjo, Jeannot Mane Mane, Germain Hubert Ben-Bolie, Pierre Owono Ateba
• Citations: 5 (Details)

• Swelling Behavior of Polyacrylamide Hydrogels near Phase Transition, Materials Sciences and Applications, Vol.5 No.8, 2014
• R. R. Janot Pacheco, M. E. S. R. Silva, R. G. Sousa, R. F. S. Freitas
• Citations: 5 (Details)

• The Study of Green Compression Strength of a Green Sand Mould Using Statistical Approach, Materials Sciences and Applications, Vol.5 No.12, 2014
• Aondona Paul Ihom, Aniekan Offiong
• Citations: 5 (Details)

• Recovery of Silver from Cyanide Solutions Using Electrochemical Process Like Alternative for Merrill-Crowe Process, Materials Sciences and Applications, Vol.5 No.12, 2014
• Víctor Vázquez, José Parga, Jesús L. Valenzuela, Gabriela Figueroa, Alejandro Valenzuela, Guillermo Munive
• Citations: 5 (Details)

• Micromagnetic Investigation of Microwave Permeability of Magnetic Artificial Spin Ice, Materials Sciences and Applications, Vol.5 No.14, 2014
• Fusheng Ma, Yuping Wu, Baoyu Zong
• Citations: 5 (Details)

• Microhardness and Biocompatibility of Silicon Nitride Ceramic Developed for Dental Applications, Materials Sciences and Applications, Vol.5 No.14, 2014
• Rayaa Wananuruksawong, Thanakorn Wasanapiarnpong, Nirada Dhanesuan, Pavinee Padipatvuthikul Didron
• Citations: 5 (Details)

• Dielectric Properties of Multi-Layers Hexagonal Boron Nitride, Materials Sciences and Applications, Vol.11 No.6, 2020
• M. Fazail Khalid, Ibtisam Riaz, Rashid Jalil, Usamah Mahmood, Rehan Rahat Mir, Hafiz Amir Sohail
• Citations: 5 (Details)

• Formation of Germanium-Carbon Core-Shell Nanowires by Laser Vaporization in High-Pressure Ar Gas without the Addition of Other Metal Catalysts, Materials Sciences and Applications, Vol.8 No.12, 2017
• Kazuya Hatano, Yuuki Asano, Yuuto Kameda, Akira Koshio, Fumio Kokai
• Citations: 5 (Details)

• Influence of MIG/MAG Welding Process on Mechanical and Pitting Corrosion Behaviors on the Super-Duplex Stainless Steel SAF 2507 Welded Joints, Materials Sciences and Applications, Vol.9 No.2, 2018
• Bruno Leonardy S. Lopes, Samuel F. Rodrigues, Eden S. Silva, Gedeon S. Reis, Waldemir dos P. Martins, Juvenilson Costa Damascena, Valdemar S. Leal
• Citations: 5 (Details)

• Fabrication and Optical Characterization of Palm Fiber Reinforced Acrylonitrile Butadiene Styrene Based Composites: Band Gap Studies, Materials Sciences and Applications, Vol.9 No.2, 2018
• Budrun Neher, Md. Mahbubur Rahman Bhuiyan, Humayun Kabir, Md. Abdul Gafur, Farid Ahmed
• Citations: 5 (Details)

• Characterization and Lifetime Estimation of High Density Polyethylene Containing a Prodegradant Agent, Materials Sciences and Applications, Vol.8 No.13, 2017
• Cynthia D. C. Erbetta, Raquel C. S. Azevedo, Karen S. Andrade, Maria Elisa S. R. e Silva, Roberto F. S. Freitas, Ricardo G. Sousa
• Citations: 5 (Details)

• Optimization and Characterization of Nano Aluminum Trihydrate-Based Flame-Retardant Materials in the Rotating Packed Bed Reactor, Materials Sciences and Applications, Vol.9 No.13, 2018
• Pao Chi Chen, Ling Chun Yang
• Citations: 5 (Details)

• Changing Wisdom of Metallic Alloys Development, Materials Sciences and Applications, Vol.9 No.13, 2018
• Manoj Gupta
• Citations: 4 (Details)

• Tribological Behavior of Binary B-C Films Deposited by Sputtering-PBII Hybrid System, Materials Sciences and Applications, Vol.9 No.9, 2018
• Honei Chin, Satoshi Yoshida, Shuichi Watanabe
• Citations: 4 (Details)

• High Temperature Deformation Behavior of TC17 Alloy, Materials Sciences and Applications, Vol.9 No.9, 2018
• Chen Wang
• Citations: 4 (Details)

• Polymer Analyses for an Adapted Process Design of the Pipe-Extrusion of Polyetherimide, Materials Sciences and Applications, Vol.9 No.7, 2018
• Michael Stegelmann, Michael Müller, Anja Winkler, Alexander Liebsch, Niels Modler
• Citations: 4 (Details)

• Study the Influence of UV-Irradiation on the Photo Stability of Pure and Plasticized Poly (4-Vinyl Biphenyl) in Solid Films, Materials Sciences and Applications, Vol.8 No.13, 2017
• Khalid Essa Al Ani, Afrah Essa Ramadhan, Suha Khanfar
• Citations: 4 (Details)

• Corrosion in Tap Water and Hot Water Supply Facilities of Stainless Steel Type 304 Pipes, Materials Sciences and Applications, Vol.9 No.1, 2018
• Noriyuki Tanaka, Shigeru Sato, Ippei Watanabe, Yutaka Yamada, Osamu Sakurada
• Citations: 4 (Details)

• Mechanical, Thermal and Electrical Properties of Lotus-Type Porous Metals, Materials Sciences and Applications, Vol.9 No.2, 2018
• Hideo Nakajima
• Citations: 4 (Details)

• Very High Cycle Fatigue Behaviors and Surface Crack Growth Mechanism of Hydrogen-Embrittled AISI 304 Stainless Steels, Materials Sciences and Applications, Vol.9 No.4, 2018
• Seung-Hoon Nahm, Hyun-Bo Shim, Un-Bong Baek, Chang-Min Suh
• Citations: 4 (Details)

• Elastomer Composites with Enhanced Ice Grip Based on Renewable Resources, Materials Sciences and Applications, Vol.9 No.4, 2018
• Nikolai Dishovski, Filis Mitkova, Mara Kandeva, Yordan Angelov, Ivan Uzunov, Milcho Ivanov, Dimitar Klissurski
• Citations: 4 (Details)

• Mechanical Properties of Remote-Laser Cut CFRP and Thermographic Laser-Process Monitoring, Materials Sciences and Applications, Vol.11 No.8, 2020
• Michael Rose, Sebastian Schettler, Florian Klemm, Eckhard Beyer, Martina Zimmermann
• Citations: 4 (Details)

• A Study of Water Treatment Chemical Effects on Type I” Pitting Corrosion of Copper Tubes, Materials Sciences and Applications, Vol.11 No.7, 2020
• Takashi Iyasu, Motoki Kuratani, Itaru Ikeda, Noriyuki Tanaka, Yutaka Yamada, Osamu Sakurada
• Citations: 4 (Details)

• Cellulose Nanoparticles Extracted from Sugarcane Bagasse and Their Use in Biodegradable Recipients for Improving Physical Properties and Water Barrier of the Latter, Materials Sciences and Applications, Vol.11 No.1, 2020
• Antônio Jedson Caldeira Brant, Natália Naime, Ademar Benévolo Lugão, Patrícia Ponce
• Citations: 4 (Details)

• Anomalous Proton Conductivity in Chitin-Chitosan Mixed Compounds, Materials Sciences and Applications, Vol.11 No.1, 2020
• Takashi Kawabata, Yusuke Takahashi, Yasumitsu Matsuo
• Citations: 4 (Details)

• Elaboration and Characterization of a Composite Material Based on Canarium schweinfurthii Engl Cores with a Polyester Matrix, Materials Sciences and Applications, Vol.11 No.3, 2020
• Dieunedort Ndapeu, Francis Tamwo, Morino Bernard Nganou Koungang, Ghislain Tchuen, Nicodème R. Sikame Tagne, Sophie Bistac, Ebénezer Njeugna
• Citations: 4 (Details)

• Nanomaterials in Low-Temperatures Fuel Cells—The Latest Reports, Materials Sciences and Applications, Vol.10 No.10, 2019
• Renata Wlodarczyk
• Citations: 4 (Details)

• Oxidation Kinetics of Aluminum Powders in a Gas Fluidized Bed Reactor in the Potential Application of Surge Arresting Materials, Materials Sciences and Applications, Vol.10 No.3, 2019
• Hong Shih
• Citations: 4 (Details)

• Formation of Supersaturated Solid Solutions Bi-Ag and Bi-Zn by Rapid Solidification Using Melt Spinning Technique, Materials Sciences and Applications, Vol.6 No.2, 2015
• Tarek El-Ashram
• Citations: 4 (Details)

• Friction Coefficient Displayed by the Scratch of Epoxy Composites Filled by Metallic Particles under the Influence of Magnetic Field, Materials Sciences and Applications, Vol.6 No.2, 2015
• F. I. El-Zahraa, G. T. Abdel-Jaber, M. I. Khashaba, W. Y. Ali
• Citations: 4 (Details)

• Low-Loss Co₂-Y Ferrites with Added CuO Sintered in Air for High Frequency Application, Materials Sciences and Applications, Vol.5 No.13, 2014
• Shigeo Fujii, Koji Wakamatsu, Hiroshi Satoh, Setsuo Yamamoto
• Citations: 4 (Details)

• Preparation and Optical Patterning of Organic-Inorganic Hybrid Color-Filter Films Using Latent Pigments by Utilizing Photo-Acid-Generator and Microwave Irradiation, Materials Sciences and Applications, Vol.5 No.14, 2014
• T. Ohishi, S. Sugawara
• Citations: 4 (Details)

• Mineralogical and Chemical Characteristics of Clays Consumed in the District of Abidjan (CÔte D’Ivoire), Materials Sciences and Applications, Vol.5 No.14, 2014
• Vamoussa Coulibaly, Joseph Sei, Léon Konan Koffi, Samuel Oyetola, El-Aïd Jdid, Fabien Thomas
• Citations: 4 (Details)

• Nanoporous Silicon-Based Ammonia-Fed Fuel Cells, Materials Sciences and Applications, Vol.5 No.14, 2014
• Tayyar D. Dzhafarov, Sureyya Aydin Yuksel, Mustafa Aydin
• Citations: 4 (Details)

• Multilayer GaAs-Based Heterostructures with Holographic Concentrator for Solar Cells, Materials Sciences and Applications, Vol.5 No.12, 2014
• Azamatov Zakirdjan Tahirovich, Akbarova Nigora Alimdjanovna, Mavlyanov Abdulaziz Shavkatovich, Muminov Ramizulla Abdullayevich, Redkorechev Vecheslav Ivanovich, Tukfatullin Oskar Faritovich, Khusainov Ilhom Aminovich
• Citations: 4 (Details)

• Critical Parameters and Magnetocaloric Effect of the La_5/8Ca_3/8Mn_0.9750Pd_0.025O₃ Compound, Materials Sciences and Applications, Vol.5 No.12, 2014
• L. V. Bau, N. M. An
• Citations: 4 (Details)

• Influence of Fe Content on Tool Galling in Ironing Aluminum Beverage Cans, Materials Sciences and Applications, Vol.5 No.10, 2014
• Aleksey Vladimirovich Andrianov, Elena Gennadievna Kandalova, Evgeniy Vladimirovich Aryshensky
• Citations: 4 (Details)

• A Comparative Study of the Phase Distribution in Carbon-Silica Hybrid Fillers for Rubber Obtained by Different Methods, Materials Sciences and Applications, Vol.5 No.10, 2014
• Omar A. Al-Hartomy, Ahmed A. Al-Ghamdi, Said A. Farha Al-Said, Nikolay Dishovsky, Michael B. Ward, Petrunka Malinova, Mihail Mihaylov
• Citations: 4 (Details)

• Synthesis and Characterization of Liquid Crystal Elastomer, Materials Sciences and Applications, Vol.6 No.6, 2015
• Rita A. Gharde, Santosh A. Mani, Suman Lal, Samriti Khosla, S. K. Tripathi
• Citations: 4 (Details)

• The Impact of Aluminum- and Iron-Bearing Admixtures on the Resistance of Portland Cement Mortars to Alkali-Silica Reaction and Sulfate Attack, Materials Sciences and Applications, Vol.6 No.6, 2015
• Alexey Brykov, Anna Anisimova, Natalya Rozenkova, Mohammed Hadi, Maxim Mokeev
• Citations: 4 (Details)

• Effect of Composition and Morphology on Sensor Properties of Aerosol Deposited Nanostructured ZnO+In₂ O₃ Films, Materials Sciences and Applications, Vol.6 No.3, 2015
• Leonid I. Trakhtenberg, Seyed M. Navid Khatami, Genrikh N. Gerasimov, Olusegun J. Ilegbusi
• Citations: 4 (Details)

• Preparation of Microcapsules Containing Phase Change Material and Silicon Carbide Powder with Interfacial Polycondensation Reaction Method, Materials Sciences and Applications, Vol.6 No.3, 2015
• Ryo Morita, Natsukaze Saito, Yoshinari Taguchi, Masato Tanaka
• Citations: 4 (Details)

• Synthesis and Characterization of Benzothiazol Derivative as a Corrosion Inhibitor for Carbon Steel in Seawater, Materials Sciences and Applications, Vol.6 No.7, 2015
• Abdulkareem Mohammed Ali Al-Sammarraie, Khulood Abid Al-Saade, Mohammed H. A. Al-Amery
• Citations: 4 (Details)

• Observation of Violet-Light Emission Band for Thulium-Doped Tantalum-Oxide Films Produced by Co-Sputtering, Materials Sciences and Applications, Vol.6 No.7, 2015
• Kenta Miura, Tetsuhito Suzuki, Osamu Hanaizumi
• Citations: 4 (Details)

• Biomechanical Analysis of Implant Assisted-Overdentures with Variations in the Attachments Systems, Materials Sciences and Applications, Vol.6 No.8, 2015
• Eduardo Vedovatto, Jose Vitor Quinelli Mazaro, Humberto Gennari Filho, Paulo Sérgio Perri de Carvalho, Caroline Cantieri de Mello, Cleidiel Aparecido Araujo Lemos
• Citations: 4 (Details)

• Rolling, Partial and Full Annealing of 6061 Characterization of Microstructure, Tensile Strengths and Ductility, Materials Sciences and Applications, Vol.7 No.9, 2016
• Wei Zhang
• Citations: 4 (Details)

• Effect of Environmental Conditions on Flexural Strength and Fracture Toughness of Particulate Filled Glass-Epoxy Hybrid Composites, Materials Sciences and Applications, Vol.7 No.11, 2016
• Basappa Hulugappa, Mysuru Venkataramaiah Achutha, Bheemappa Suresha
• Citations: 4 (Details)

• Corrosion Behavior of API 5L X52 Steel under High Concentrations of H₂S/CO₂ Gases, Materials Sciences and Applications, Vol.7 No.10, 2016
• Mónica Jazmín Hernández Gayosso, Gerardo Zavala Olivares, Saúl Bautista Fragoso, Gabriel Ernesto Blanco del Valle, Daniel Mauricio Godínez Oidor, Víctor Ángel Rodríguez Gómez
• Citations: 4 (Details)

• Nonlinear and Rate-Dependent Hysteretic Responses of Active Hybrid Composites, Materials Sciences and Applications, Vol.7 No.1, 2016
• Chien-Hong Lin, Anastasia Muliana
• Citations: 4 (Details)

• Mandibular Anterior Immediate Denture Using Visible Light Cure Acrylic, Materials Sciences and Applications, Vol.6 No.11, 2015
• Amit A. Paryag, Paul Seerattan, Reisha N. Reisha N., Melissa S. Mankee
• Citations: 4 (Details)

• Effect of Ceramic Powder Coatings on Low Carbon Steel, Materials Sciences and Applications, Vol.7 No.5, 2016
• Oluwatoyin Adenike Olaseinde, Benjamin Omotayo Adewuyi
• Citations: 4 (Details)

• Obtaining at High Pressure the TiN-TiB₂ Ceramic Nano-Composite, Materials Sciences and Applications, Vol.7 No.5, 2016
• A. Bykov, M. Vlasova, P. A. Márquez Aguilar, M. Kakazey
• Citations: 4 (Details)

• Influence of Oxygen Addition on Structure and Properties of Titanium Produced by Electroslag Remelting, Materials Sciences and Applications, Vol.7 No.3, 2016
• Olga Snizhko, Anatoliy Ryabtsev, Alexandr Troyanskyy, Vladimir Pashinskii, Bernd Friedrich, Johannes Morscheiser, Marek Bartosinski
• Citations: 4 (Details)

• The Influence of Additions in the Use of Glass Fibre Reinforced Cement as a Construction Material, Materials Sciences and Applications, Vol.7 No.2, 2016
• Alejandro Enfedaque, Marcos G. Alberti, Jaime C. Galvez
• Citations: 4 (Details)

• The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test, Materials Sciences and Applications, Vol.8 No.7, 2017
• Mohammad S. Alsoufi, Tahani M. Bawazeer, Mohammed W. Alhazmi, Sufyan Azam
• Citations: 4 (Details)

• Effects of the Fiber Diameter on Mechanic Properties in Polymethyl-Methacrylate Composites Reinforced with Goose Feather Fiber, Materials Sciences and Applications, Vol.8 No.11, 2017
• Kenan Büyükkaya
• Citations: 4 (Details)

• Thermomechanical Testing of GGG 40 Spheroidal Graphite Cast Iron Alloy, Materials Sciences and Applications, Vol.8 No.3, 2017
• Marwan Faisal, Eman El-Shenawy, Mohamed A. Taha
• Citations: 4 (Details)

• Rheological Behavior of Nanosilica Suspensions in Poly(Ethylene Oxide) Solutions with Sodium Chloride, Materials Sciences and Applications, Vol.8 No.5, 2017
• Yuji Hirose
• Citations: 4 (Details)

• A Novel Low Temperature Synthesis of KNN Nanoparticles by Facile Wet Chemical Method, Materials Sciences and Applications, Vol.8 No.3, 2017
• Rashmi Rani, Seema Sharma, Marzia Quaglio, Radheshyam Rai, Stefano Bianco, Diego Pugliese, Candido Fabrizio Pirri
• Citations: 4 (Details)

• A Starch-Based Biodegradable Polyethylene for Municipal Solid Waste Mitigation, Materials Sciences and Applications, Vol.8 No.1, 2017
• Adedoyin Raheem, Bolaji Aremo, Mosobalaje Oyebamiji Adeoye
• Citations: 4 (Details)

• Photo-Induced Thermally Stimulated Depolarization Current (TSDC) in Natural and Synthetic Alexandrite (BeAl₂O₄:Cr³⁺), Materials Sciences and Applications, Vol.7 No.12, 2016
• Neilo Marcos Trindade, Ana Regina Blak, Elisabeth Mateus Yoshimura, Luis Vicente de Andrade Scalvi, Rosa Maria Fernandes Scalvi
• Citations: 4 (Details)

• Developments of Cr-Si and Ni-Cr Single-Layer Thin-Film Resistors and a Bi-Layer Thin-Film Resistor with Adjustable Temperature Coefficient of Resistor, Materials Sciences and Applications, Vol.7 No.12, 2016
• Huan-Yi Cheng, Ying-Chung Chen, Chi-Lun Li, Pei-Jou Li, Mau-Phon Houng, Cheng-Fu Yang
• Citations: 4 (Details)

• The Methodological Way to Diagnostic of Efficiency Active Leaching Materials, Materials Sciences and Applications, Vol.3 No.2, 2012
• Nikolay N. Petrov, Roman V. Gorokhov, Tatyana N. Musorina, Tatyana B. Kasatkina, Natalya A. Shkabara, Nikolay N. Bukov
• Citations: 4 (Details)

• Thermodynamic Properties of Semiconductors with Defects, Materials Sciences and Applications, Vol.2 No.9, 2011
• Vu Van Hung, Le Dai Thanh
• Citations: 4 (Details)

• Theoretical Investigations of Ti-Based Binary Shape Memory Alloys, Materials Sciences and Applications, Vol.2 No.10, 2011
• Rita John, Hannah Ruben
• Citations: 4 (Details)

• Effect of Slow Cooling in Reducing Pore Size in a Sintered Powder Metallurgical 6061Aluminium Alloy, Materials Sciences and Applications, Vol.2 No.7, 2011
• S. Solay Anand, B. Mohan, T. R. Parthasarathy
• Citations: 4 (Details)

• Interaction of 8 MeV Electron beam with P31 Bombyx mori Silk Fibers, Materials Sciences and Applications, Vol.2 No.7, 2011
• Sangappa Halabhavi, Sangappa Asha, Puttanna Parameswar, Rudrappa Somashekar, Sanjeev Ganesh
• Citations: 4 (Details)

• Synthesis and Properties of Polythiophène Benzylidene and Their Photovoltaic Applications, Materials Sciences and Applications, Vol.2 No.8, 2011
• Reguig Bendoukha Abdelkarim, Ahmed Yahiaoui, Aïcha Hachemaoui, Mohammed Belbachir, Abdelbasset Khelil
• Citations: 4 (Details)

• Nanostructures on Surface of SrTio₃ Single Crystals Treated by Plasma, Materials Sciences and Applications, Vol.2 No.8, 2011
• Nicolay Kulagin, Jablan Dojcilovic, Ellen Hieckmann
• Citations: 4 (Details)

• Evaluation of Characteristics of Interfacial Phases Produced in Al/Ni₃Al Composite during Manufacturing, Materials Sciences and Applications, Vol.2 No.9, 2011
• Seyed Abdolkarim Sajjadi, Maryam Abbasi, Mazyar Azadbeh
• Citations: 4 (Details)

• Electrochemical Behavior of Nanocrystalline Fe₈₈Si₁₂ Alloy in 3.5% NaCl Solution, Materials Sciences and Applications, Vol.2 No.5, 2011
• Licai Fu, Jun Yang, Qinling Bi, Weimin Liu
• Citations: 4 (Details)

• Consolidation of MA W-Ni-Fe Alloyed Powder by Microwave-Assisted Sintering, Materials Sciences and Applications, Vol.2 No.6, 2011
• Wensheng Liu, Yunzhu Ma, Qingshan Cai
• Citations: 4 (Details)

• Effect of High Temperature Treatment on Aqueous Corrosion of Low-Carbon Steel by Electrochemical Impedance Spectroscopy, Materials Sciences and Applications, Vol.2 No.2, 2011
• Samuel J. Gana, Nosa O. Egiebor, Ramble Ankumah
• Citations: 4 (Details)

• The Effect of the pH of Ammonum Nitrate Solution on the Susceptability of Mild Steel to Stress Corrosion Cracking (SCC) and General Corrosion, Materials Sciences and Applications, Vol.1 No.4, 2010
• Fathia S. Mohammed, Alyaa G. Elramady, Salheddin E. Abu Yahya
• Citations: 4 (Details)

• Effect of Notch Severity on Fatigue Behaviour of ADI Castings, Materials Sciences and Applications, Vol.4 No.2, 2013
• Khaled M. Ibrahim, Bakkar El-Sarnagawy, Ibrahim I. Saleh
• Citations: 4 (Details)

• Modeling and Numerical Simulations with Compressible Damaged Hyperelastic Law: Application to the Laminated Rubber Bearing, Materials Sciences and Applications, Vol.3 No.11, 2012
• Maha Zaghdoudi, Zohra Gaiech, Lamia Bejaoui, Zoubeir Tourki, Adnane Boukamel
• Citations: 4 (Details)

• Optoelectronic Properties of GaN-Based Light-Emitting Diodes with Different Mesa Structures, Materials Sciences and Applications, Vol.3 No.12, 2012
• Xueyun Song, Xianghua Zeng, Junbin Zhang, Yuzhe Jin, Xiangdong Meng
• Citations: 4 (Details)

• Rendering of Cellulose Acetate Fabrics Self-Cleaning through Treatment with TiO₂ Nano Particles, Materials Sciences and Applications, Vol.3 No.12, 2012
• M. A. Ramadan, W. M. Raslan, E. M. El-Khatib, A. Hebeish
• Citations: 4 (Details)

• Fabrication of Sintered Diamond/Metal Composites and Evaluation of Grinding Performance for Sapphire, Materials Sciences and Applications, Vol.3 No.9, 2012
• Makoto Inoue, Kenta Yasuda, Tadashi Ito, Tetsu Sasahara, Masaru Yokota, Atsushi Nakahira
• Citations: 4 (Details)

• On the Validity of the Effective Index Method for Long Period Grating Photonic Crystal Fibers, Materials Sciences and Applications, Vol.3 No.5, 2012
• Dhia Khadri, Walid Belhadj, Douha Gamra, Fathi AbdelMalek, Habib Bouchriha
• Citations: 4 (Details)

• Production of Ca₂AlNbO₆ Ceramics and Study of Their Stability in Crude Petroleum for the Conservation of Metallic Sensing Elements used in Petroleum Extraction, Materials Sciences and Applications, Vol.3 No.6, 2012
• Yogendra P. Yadava, Marilaine M. de Lima, José Carlos S. Oliveira, Ricardo A. Sanguinetti Ferreira
• Citations: 4 (Details)

• Analysis of the Tracer Diffusion Phenomena through Cracks in the Porous Media by Means of X-Ray CT, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Akira Sato
• Citations: 4 (Details)

• Novel Solid State Nitric Oxide Sensor Using Siloxane-Poly(Oxypropylene) (PPO), Materials Sciences and Applications, Vol.4 No.11, 2013
• Rondinelli D. Herculano, Carlos A. Brunello, Jair P. Melo Jr., Mayler Martins, Felipe A. Borges, Leila A. Chiavacci, Carlos F. O. Graeff
• Citations: 4 (Details)

• Evaluation of Mean Crystallite Size on Magnetic Powder by Scanning Electron Microscopy and Synchrotron Diffractometry, Materials Sciences and Applications, Vol.5 No.8, 2014
• Eguiberto Galego, Marilene Morelli Serna, Rubens Nunes de Faria Junior
• Citations: 4 (Details)

• Structural Aspects of Monomeric Platinum Coordination Complexes, Materials Sciences and Applications, Vol.5 No.8, 2014
• Milan Melník, Peter Mikuš
• Citations: 4 (Details)

• Conduction Mechanism Analysis of Inversion Current in MOS Tunnel Diodes, Materials Sciences and Applications, Vol.4 No.12, 2013
• Ayşe Evrim Saatci, Orhan Özdemir, Kubilay Kutlu
• Citations: 4 (Details)

• Design Considerations on a Flexible Membrane Tsunami Flood Barrier, Materials Sciences and Applications, Vol.4 No.12, 2013
• Roelof Marissen, Julio Suarez Mulder, Dietrich Wienke, Otto Bergsma
• Citations: 4 (Details)

• Preparation of Microcapsules Containing Water Droplets Stabilized with Solid Powder and Application to Blowing Agent, Materials Sciences and Applications, Vol.5 No.1, 2014
• Daisuke Nakamura, Hiroshi Yokoyama, Yoshinari Taguchi, Masato Tanaka
• Citations: 4 (Details)

• Evaluation of Degradation of PET Film by Partial Discharge Method, Materials Sciences and Applications, Vol.5 No.1, 2014
• Akinori Iguchi, Hideo Hirabayashi, Takahiro Hayashi, Kazushi Yamada, Hiroyuki Nishimura
• Citations: 4 (Details)

• Study on NH₃ Plasma-Treated Polyimide/MWNT Composites on Electrical and Surface Properties, Materials Sciences and Applications, Vol.5 No.1, 2014
• Yao-Yi Cheng, Hung-Han Ko, Shang-Chih Chou, Pi-Sheng Ku
• Citations: 3 (Details)

• The Impact of Aluminum-Containing Set Accelerators on Sulfate Resistance of Portland Cement Compositions, Materials Sciences and Applications, Vol.4 No.12A, 2013
• Alexey S. Brykov, Andrey S. Vasiliev, Maxim V. Mokeev
• Citations: 3 (Details)

• Influence of Comb-Polymer Structure on C₃S Phase Hydration, Materials Sciences and Applications, Vol.4 No.12A, 2013
• Lidia Eusebio, Marco Goisis, Giuseppe Manganelli, Valerio Antonio Paternò, Paolo Gronchi
• Citations: 3 (Details)

• Schottkey Barrier Measurement of Nanocrystalline Lu₃N@C₈₀/Au Contact, Materials Sciences and Applications, Vol.4 No.12, 2013
• Yong Sun, Yusuke Hattori, Masamichi Sakaino, Fumio Morimoto, Kenta Kirimoto
• Citations: 3 (Details)

• Strain Capacities Limits of Wrought Magnesium Alloys: Tension vs. Expansion, Materials Sciences and Applications, Vol.4 No.12, 2013
• R. Boissiere, P. Vacher, J. J. Blandin, A. Khelil
• Citations: 3 (Details)

• Synthesis and Dielectric Properties of (0.80 - x)Pb(Cr_1/5,Ni_1/5,Sb_3/5)O₃-xPbTiO₃-0.20PbZrO₃ Ferroelectric Ceramics, Materials Sciences and Applications, Vol.4 No.11, 2013
• Abdelhek Meklid, Ahmed Boutarfaia, Zelikha Necira, Hayet Menasra, Malika Abba
• Citations: 3 (Details)

• Preparation of Bi₄Ti₃O₁₂ (BIT) Ceramics via a High-Energy Ball Milling Process Doped with Multi-Walled Carbon Nanotubes (MWNTs), Materials Sciences and Applications, Vol.4 No.9, 2013
• Alexandre Gonçalves Pinheiro, Gilberto Dantas Saraiva, Josué Mendes Filho, Antonio Sergio Bezerra Sombra
• Citations: 3 (Details)

• Synthesis, Characterizations and in Vitro Assessment of the Cytotoxicity and Genotoxicity of Novel Silicon Nitride-Based Porous Ceramics, Materials Sciences and Applications, Vol.4 No.7, 2013
• Miroslav Hnatko, Zoltán Lenčéš, Peter Čopan, Lucia Birošová, Patrik Matejov, Soňa Jantová
• Citations: 3 (Details)

• The Role of Valence Electron Concentration on the Structure and Properties of Rapidly Solidified Sn-Ag Binary Alloys, Materials Sciences and Applications, Vol.3 No.3, 2012
• M. Kamal, A. B. El-Bediwi, T. El-Ashram, M. E. Dorgham
• Citations: 3 (Details)

• Discontinuous Precipitation and Dissolution under the Influence of the Plastic Strain and Temperature in Al-15 at.%Zn and Al-30 at.%Zn Alloys, Materials Sciences and Applications, Vol.3 No.7, 2012
• Mazouz Hamoudi, Bensaada Said, Mohamed Tewfik, Bouziane Bouziane, Laboratoire Larhyss
• Citations: 3 (Details)

• Development of an Experimental Phosphate-Calcium Cement with a Whisker-Like Structure, Materials Sciences and Applications, Vol.3 No.11, 2012
• Hideaki Narusawa, Yukimichi Tamaki, Takashi Miyazaki
• Citations: 3 (Details)

• The Static Characteristic Loop and the External Demagnetizing Factor, Materials Sciences and Applications, Vol.3 No.10, 2012
• J. Takacs, Gy. Kovacs, L. K. Varga
• Citations: 3 (Details)

• First Principles Study of Structural and Electronic Properties of O_xS_1-xZn Ternary Alloy, Materials Sciences and Applications, Vol.4 No.1, 2013
• Mohammed Ameri, Daho Salah Eddine, Mokhtar Sebane, Keltouma Boudia, Yarub Al-Douri, Ali Bentouaf, Djelloul Hachemane, Bachir Bouhafs, Amina Touia
• Citations: 3 (Details)

• The Modifications of Wagner’s Equation and Electrochemistry for the 21st Century, Materials Sciences and Applications, Vol.2 No.3, 2011
• Tomofumi Miyashita
• Citations: 3 (Details)

• Quasi-Static and Dynanmic Deformation Behaviors of Medium-Carbon Steels in a Wide Temperature Range, Materials Sciences and Applications, Vol.2 No.6, 2011
• Byoungchul Hwang
• Citations: 3 (Details)

• Investigation by AES, EELS and TRIM Simulation Method of InP(100) Subjected to He⁺ and H⁺ Ions Bombardment, Materials Sciences and Applications, Vol.2 No.5, 2011
• Mohamed Ghaffour, Abdellaoui Abdellaoui, Abdellah Ouerdane, M'Hammed Bouslama, Christian Jardin
• Citations: 3 (Details)

• Polymer-Controlled Synthesis of 1-(2-Pyridylazo)-2-Naphthol Hierarchical Architectures, Materials Sciences and Applications, Vol.2 No.6, 2011
• Jie Leng, Qiulin Liao, Yong Gao, Huaming Li
• Citations: 3 (Details)

• Catalytic Esterification of Oleic Acid Over SO₄^2-/MCM-41 Nanostructured Materials, Materials Sciences and Applications, Vol.2 No.6, 2011
• Alexsandra Rodrigues do Nascimento, Gicélia Rodrigues, Joselaine Carvalho Santana, Anne Michelle Garrido Pedrosa, Marcelo José Barros de Souza
• Citations: 3 (Details)

• Kinetics of Indium Extraction from Mechanically Activated ITO Scrap, Materials Sciences and Applications, Vol.2 No.6, 2011
• Xuanhai Li, Yanjuan Zhang, Jinhuan Yao, Xiumin Li, Liuping Pan
• Citations: 3 (Details)

• Thermomechanical Stress in the Evolution of Shear of Fiber-Matrix Interface Composite Material, Materials Sciences and Applications, Vol.2 No.5, 2011
• Dalila Remaoun, Ahmed Boutaous
• Citations: 3 (Details)

• Melting and Corrosion Behavior of Al-9Zn Based Alloys with Cu and Mg Additions, Materials Sciences and Applications, Vol.2 No.5, 2011
• El Said Gouda, Emad Ahmed, Nabih Tawfik
• Citations: 3 (Details)

• Vibrations of a One-Dimensional Host-Guest System, Materials Sciences and Applications, Vol.2 No.5, 2011
• Amelia Carolina Sparavigna
• Citations: 3 (Details)

• A Top-Down Approach of Making Sn-3.5Ag Nanosolder Alloy by Swirl Method, Materials Sciences and Applications, Vol.2 No.9, 2011
• Hsin Jen Pan, Chao Yang Lin, Jung Hua Chou, Udit Surya Mohanty, Yuan Gee Lee
• Citations: 3 (Details)

• Structural and Electrical Properties of Niobium Doped Y_0.6Gd_0.4Ba_2-xNb_xCu₃O_7-y Superconductors, Materials Sciences and Applications, Vol.2 No.8, 2011
• Mucahit Yilmaz, Oguz Dogan
• Citations: 3 (Details)

• Growth Kinetics of Nd₂Fe₁₄B Phase during Hydrogen-Induced Reverse Phase Transformation in Nd₂Fe₁₄B Type Nanocrystalline Magnetic Alloy, Materials Sciences and Applications, Vol.2 No.8, 2011
• Sergey Borisovich Rybalka
• Citations: 3 (Details)

• Si-N-C Nanowires Derived by Polyhydridomethylsilazane Pyrolysis, Materials Sciences and Applications, Vol.2 No.7, 2011
• Gong Jin Qi
• Citations: 3 (Details)

• Predictive Modelling of Etching Process of Machinable Glass Ceramics, Boron Nitride, and Silicon Carbide, Materials Sciences and Applications, Vol.2 No.11, 2011
• Huey Tze Ting, Khaled Abou-El-Hossein, Han Bing Chua
• Citations: 3 (Details)

• Deformation-Induced Large Ductility of Super Saturated Solid Solution Fe-Cu Alloy, Materials Sciences and Applications, Vol.2 No.11, 2011
• Licai Fu, Jun Yang, Qinling Bi, Weimin Liu
• Citations: 3 (Details)

• Experimental Study of Acoustic Noise Correlation Technique for Passive Monitoring of Rails, Materials Sciences and Applications, Vol.7 No.12, 2016
• Laïd Sadoudi, Emmanuel Moulin, Jamal Assaad, Farouk Benmeddour, Michaël Bocquet, Yassin El Hillali
• Citations: 3 (Details)

• On the Alternate Direction Implicit (ADI) Method for Solving Heat Transfer in Composite Stamping, Materials Sciences and Applications, Vol.8 No.1, 2017
• Arthur Levy, Duc Anh Hoang, Steven Le Corre
• Citations: 3 (Details)

• Study on the Expansion of a Cement-Based System Containing Sap Polymer and Supplementary Cementing Materials, Materials Sciences and Applications, Vol.8 No.2, 2017
• Tatiana L. Ávalos-Rendón, Carlos Javier Mendoza
• Citations: 3 (Details)

• Evaluation of Maintenance Strategies Based on Leakage Risk Assessment on Side Impervious Walls at Coastal Landfill Sites, Materials Sciences and Applications, Vol.8 No.6, 2017
• Shinya Inazumi, Misato Sekitani, Kwang-Seok Chae, Ken-Ichi Shishido
• Citations: 3 (Details)

• A Potential Corrosion Inhibitor for Acid Corrosion of Mild Steel, Materials Sciences and Applications, Vol.8 No.6, 2017
• Osarolube Eziaku
• Citations: 3 (Details)

• Laser-Based Fabrication of Nanofoam inside a Hollow Capillary, Materials Sciences and Applications, Vol.8 No.12, 2017
• Alexander F. Courtier, James A. Grant-Jacob, Rand Ismaeel, Daniel J. Heath, Gilberto Brambilla, William J. Stewart, Robert W. Eason, Ben Mills
• Citations: 3 (Details)

• Visualizing the Effect of Extrusion Velocity on the Spatial Variation of Porosity in a Titanium Dioxide/Binder System, Materials Sciences and Applications, Vol.8 No.13, 2017
• Mustafa Kanaan Alazzawi, Sukanya Murali, Richard A. Haber
• Citations: 3 (Details)

• Structural Analysis of Magnesium-Aluminium Hydrotalcites Modified with Iron III Obtained by Hydroxide Precipitation Method, Materials Sciences and Applications, Vol.8 No.11, 2017
• Graciele Vieira Barbosa, Maria Aparecida Zaghete, Rafael Aparecido Ciola Amoresi, Margarete Soares da Silva, Alberto Adriano Cavalheiro, Rogério Cesar de Lara da Silva
• Citations: 3 (Details)

• Electrochemical Sensors Based on Modification of Carbon Fiber Microelectrode by Nickel Phthalocyanine Polymer for 3-Methyl-4-Nitrophenol Analysis in Water, Materials Sciences and Applications, Vol.8 No.11, 2017
• Yibor Fabrice Roland Bako, Boukare Kabore, Issa Tapsoba
• Citations: 3 (Details)

• Evaluation of Preservation Effect by Aquo-Siloxane Method towards Water Permeation and Material Diffusion into Porous Rocks, Materials Sciences and Applications, Vol.8 No.6, 2017
• Akira Sato, Minami Egashira, Michiyo Obata
• Citations: 3 (Details)

• Optical and NH₃ Gas Sensing Properties of Hole-Transport Layers Based on PEDOT: PSS Incorporated with Nano-TiO₂, Materials Sciences and Applications, Vol.8 No.9, 2017
• Lam Minh Long, Tran Quang Trung, Vo-Van Truong, Nguyen Nang Dinh
• Citations: 3 (Details)

• Digital Micrometer Used in Thickness Measurement of Plastic Film Compared to Standardized Instrument, Materials Sciences and Applications, Vol.8 No.7, 2017
• Carlos Eugênio Fortes Teixeira, Ingrid de Almeida Rebechi, Renato Serena Fontaneli
• Citations: 3 (Details)

• Carbon Replicas of Porous Concrete Obtained by Chemical Vapor Deposition—Some Aspects of the Synthesis Mechanism, Materials Sciences and Applications, Vol.8 No.8, 2017
• Olaf Klepel, Nina Danneberg, Matthias Suckow, Marcel Erlitz
• Citations: 3 (Details)

• Some Factors Influencing the Dielectric Properties of Natural Rubber Composites Containing Different Carbon Nanostructures, Materials Sciences and Applications, Vol.7 No.2, 2016
• Ahmed A. Al-Ghamdi, Omar A. Al-Hartomy, Falleh R. Al-Solamy, Nikolay Dishovsky, Diana Zaimova, Rossitsa Shtarkova, Vladimir Iliev
• Citations: 3 (Details)

• Corrosion Resistance of API5L X52 Carbon Steel in Sulfide Polluted Environments, Materials Sciences and Applications, Vol.7 No.1, 2016
• Randa Abdel-Karim, Mohamed Ali Farag, Hafiz Abdel-Azim Ahmed, Saad El-Raghy
• Citations: 3 (Details)

• Observations of Wood Cell Walls with a Scanning Probe Microscope, Materials Sciences and Applications, Vol.7 No.10, 2016
• Manami Yamashita, Masato Yoshida, Miyuki Matsuo, Saori Sato, Hiroyuki Yamamoto
• Citations: 3 (Details)

• Effect of Revolution on Inhomogeneous Deformation of IF Steel in High Pressure Torsion, Materials Sciences and Applications, Vol.7 No.11, 2016
• Yuepeng Song, Miaomiao Chen, Baoyan Xu, Dongsheng Gao, Hyoung Seop Kim
• Citations: 3 (Details)

• Application of NMR Relaxometry to Study Nanostructured Poly(vinyl alcohol)/MMT/Cephalexin Materials for Use in Drug Delivery Systems, Materials Sciences and Applications, Vol.7 No.7, 2016
• Antonio de Pádua Castelo Branco Cunha, Maria Inês Bruno Tavares, Emerson Oliveira da Silva
• Citations: 3 (Details)

• Study of the Wear and Corrosion Performance of Hard Coatings Applied by Different Processes on Low Carbon Steel, Materials Sciences and Applications, Vol.7 No.7, 2016
• Carlos Roberto Camello Lima, Rodolfo Libardi, Flávio Camargo, Miguel Angel Reyes Mojena, Hipólito Domingo Carvajal Fals, Valtair Antonio Ferraresi
• Citations: 3 (Details)

• Corrosion of Steel Pipelines Transporting Hydrocarbon Condensed Products, Obtained from a High Pressure Separator System: A Failure Analysis Study, Materials Sciences and Applications, Vol.6 No.8, 2015
• Gerardo Zavala Olivares, Mónica Jazmín Hernández Gayosso
• Citations: 3 (Details)

• Continuous Wave Diode Laser Surface Texturing of Austenitic and Pearlitic Steels, Materials Sciences and Applications, Vol.6 No.10, 2015
• Sulthan Mohiddin Shariff, Suresh Koppoju, Tapan Kumar Pal, Padmanabham Gadhe, Shrikant Viswanath Joshi
• Citations: 3 (Details)

• Thermal and Electrical Properties of Sn-Zn-Bi Ternary Soldering Alloys, Materials Sciences and Applications, Vol.6 No.11, 2015
• M. A. Wadud, M. A. Gafur, M. R. Qadir, M. O. Rahman
• Citations: 3 (Details)

• Effects of Polysilane-Coating on Interface of Electrofusion Joints for Maintaining Strength, Materials Sciences and Applications, Vol.6 No.4, 2015
• Hiroaki Murase, Shinichi Kawasaki, Toshimichi Kitaoka, Jouji Furukawa, Hirofumi Ueda, Hiroyuki Nishimura, Kazushi Yamada
• Citations: 3 (Details)

• Some Practical Aspects of the Oxidative Stability of Polypropylene Pipes, Materials Sciences and Applications, Vol.5 No.8, 2014
• A. A. Apostolov, S. Djoumaliisky
• Citations: 3 (Details)

• Investigation of the Weldability of Austanitic Stainless Steel, Materials Sciences and Applications, Vol.5 No.8, 2014
• E. M. Anawa, M. F. Bograrah, S. B. Salem
• Citations: 3 (Details)

• LiB Electrode Ageing Observed from PVdF Binder, Materials Sciences and Applications, Vol.5 No.11, 2014
• Masamichi Sakaino, Syogo Hatake, Yong Sun, Fumio Morimoto, Kenta Kirimoto
• Citations: 3 (Details)

• Carboxylic Acids and Esters as Scaffold for Cavities in Porous Single Layer Anti-Reflective Coatings of Silica-Titania with Excellent Optical and Mechanical Properties, Materials Sciences and Applications, Vol.5 No.11, 2014
• Elisabete H. S. de C. Menezes, Peter König, Mohammad Hussein Jilavi, Peter William de Oliveira, Severino Alves Júnior
• Citations: 3 (Details)

• Natural Aging Effects on the Solutionizing Heat Treatment Process of the A6060 Al Alloy As-Cast Billets for Profile Production, Materials Sciences and Applications, Vol.6 No.2, 2015
• Georgios K. Triantafyllidis, Natalyia V. Pukhalska, Dimitrios I. Zagkliveris
• Citations: 3 (Details)

• Microencapsulation of Ascorbic Acid with Tripalmitin by Using Dry Coating Method, Materials Sciences and Applications, Vol.6 No.2, 2015
• Yoshinari Taguchi, Hidetoshi Tanabe, Kiyomi Fuchigami, Masato Tanaka
• Citations: 3 (Details)

• Movement of Dislocations in the Sub-Surface of a Polycrystalline Metal by Cavitation Peening Observed by Transmission Electron Microscopy, Materials Sciences and Applications, Vol.6 No.2, 2015
• Osamu Takakuwa, Akihiko Chiba, Hitoshi Soyama
• Citations: 3 (Details)

• A Two-Step Crystallization Route for Hierarchical SAPO-34 Molecular Sieves: Unique Structural Features and Catalytic Property for DTO, Materials Sciences and Applications, Vol.10 No.4, 2019
• Guomin Li, Zhuo Li, Xiangzhong Ren, Yan Zhang, Zhiwen Chen, Jianqiang Yu
• Citations: 3 (Details)

• Effect of Deformation Parameters on Microstructural Evolution of GGG 40 Spheroidal Graphite Cast Iron Alloy, Materials Sciences and Applications, Vol.10 No.6, 2019
• Marwan Faisal, Eman El-Shenawy, Mohamed A. Taha
• Citations: 3 (Details)

• The Application of a Representative Volume Element (RVE) Model for the Prediction of Rice Husk Particulate-Filled Polymer Composite Properties, Materials Sciences and Applications, Vol.10 No.1, 2019
• Anil Saigal, Pandhita Pochanard
• Citations: 3 (Details)

• Environmental Effects on Electronic Devices in Mexico, Materials Sciences and Applications, Vol.10 No.3, 2019
• Francisco Sánchez Pérez, Armando Ortiz Prado
• Citations: 3 (Details)

• Effect of Quenching Temperature on Microstructure and Mechanical Properties of Q1030 Steel, Materials Sciences and Applications, Vol.10 No.10, 2019
• Jianjing Wang, Yonglin Kang, Hao Yu, Wenying Ge
• Citations: 3 (Details)

• Deposition and Thermal Stability of DLC/Si-N Composite Films Synthesized Using a Sputtering-PBII Hybrid System, Materials Sciences and Applications, Vol.10 No.12, 2019
• Anas Mohammed A. Melih, Keita Yamada, Shuichi Watanabe
• Citations: 3 (Details)

• Melt and One-Pot Solution Synthesis of Thermally Stable, Organosoluble and Photocurable Acidic Polyimides, Materials Sciences and Applications, Vol.10 No.11, 2019
• Genggongwo Shi, Jeseob Kim, Kyeongha Baek, Jun Bae, Lee Soon Park
• Citations: 3 (Details)

• Effect of Heating Temperature on the Grain Size and Titanium Solid-Solution of Titanium Microalloyed Steels, Materials Sciences and Applications, Vol.10 No.8, 2019
• Jianjing Wang, Yonglin Kang, Caishui Yang, Yuexiang Wang
• Citations: 3 (Details)

• Friction and Deformation Behavior of Elastomers, Materials Sciences and Applications, Vol.10 No.8, 2019
• Alexander Adam, Dominik Paulkowski, Bernd Mayer
• Citations: 3 (Details)

• Effect of Ultra-Turrax on Nanocellulose Produced by Acid Hydrolysis and Modified by Nano ZnO by Sol-Gel Method, Materials Sciences and Applications, Vol.11 No.2, 2020
• Amanda Ramos Aragão Melo, Jose Carlos Dutra Filho, Roberto Pinto Cucinelli Neto, Wellington Silva Ferreira, Bráulio Soares Archanjo, Raphael Verdan Curti, Maria Ines Bruno Tavares
• Citations: 3 (Details)

• The Copper Thin Layer Deposition by Pulse Vacuum-Arc Sprayer, Materials Sciences and Applications, Vol.11 No.3, 2020
• A. M. Zhukeshov, А. T. Gabdullina, B. M. Ibraev, M. Mukhamedryskyzy, А. U. Amrenova, E. Baltabai
• Citations: 3 (Details)

• Investigation on the Ammonia Sensitivity Mechanism of Conducting Polymer Polypyrroles Using In-Situ FT-IR, Materials Sciences and Applications, Vol.10 No.7, 2019
• Ling Wang, Renzhi Jiang
• Citations: 3 (Details)

• Ab-Initio Self-Consistent Density Functional Theory Description of Rock-Salt Magnesium Selenide (MgSe), Materials Sciences and Applications, Vol.11 No.7, 2020
• Blaise Awola Ayirizia, Yuriy Malozovsky, Lashounda Franklin, Uttam Bhandari, Diola Bagayoko
• Citations: 3 (Details)

• Physical, Water Diffusion and Micro-Structural Analysis of “Canarium Schweinfurthii Engl”, Materials Sciences and Applications, Vol.11 No.9, 2020
• Bernard Morino Ganou Koungang, Dieunedort Ndapeu, Gilbert Tchemou, Paul William Huisken Mejouyo, Bernard Wenga Ntcheping, Josepha Tendo Foba, Luc Courard, Ebenezer Njeugna
• Citations: 3 (Details)

• The Influence of Abnormal Segregation Band on Mechanical Properties of Hot Rolled Ferrite/Pearlite Steel Plate, Materials Sciences and Applications, Vol.9 No.1, 2018
• Rui Feng, Benkui Gong, Hongwei Cui, Yaokun Pan, Jiahui Bao
• Citations: 3 (Details)

• Improvement of Sliding Performance for Ball on Disc Tribo-Partners Using Graphite Like Carbon Solid Lubricant Coating, Materials Sciences and Applications, Vol.9 No.1, 2018
• Xiaobin Wen, Huantao Yao, Shicai Yang
• Citations: 3 (Details)

• Mechanochemically Metamorphosed Composites of Homogeneous Nanoscale Silicon and Silicate Oxides with Lithium and Metal Compounds, Materials Sciences and Applications, Vol.9 No.1, 2018
• Norihiro Shimoi, Masae Komatsu, Yasumitsu Tanaka, Kazuyuki Tohji
• Citations: 3 (Details)

• Novel Cathode Materials for Sodium Ion Batteries Derived from Layer Structured Titanate Cs₂Ti₅O₁₁·(1 + x)H₂O, Materials Sciences and Applications, Vol.9 No.6, 2018
• Masao Ohashi
• Citations: 3 (Details)

• Enhanced Nonlinear Absorption Performance of Reduced Graphene Oxide Nanohybrid Covalently Functionalized by Porphyrin via 1,3-Dipolar Cycloaddition, Materials Sciences and Applications, Vol.9 No.12, 2018
• Nan Zhang, Xiaoqing Cong
• Citations: 3 (Details)

• Study of the Physical and Mechanical Properties of Coconut Spathe Fiber Reinforced Obsolete Polymer Composites, Materials Sciences and Applications, Vol.12 No.5, 2021
• Rabeya Akter, Budrun Neher, M. A. Gafur, Rakib Hossain, Farid Ahmed
• Citations: 3 (Details)

• Research Progress of the Modification in Sulfur Concrete, Materials Sciences and Applications, Vol.12 No.7, 2021
• Xuemin You
• Citations: 3 (Details)

• Impact of Cr Substitution on Structural, Magnetic, Electric and Impedance Study of Mn-Ni-Zn Ferrites, Materials Sciences and Applications, Vol.12 No.3, 2021
• Shanzida Haque, Sajal Chandra Mazumdar, Mohammed Nazrul Islam Khan, Mithun Kumar Das
• Citations: 3 (Details)

• Preparation of Black Poly(Methyl Methacrylate-Ethyleneglycol Dimethacrylate) Microspheres Using Metallic Complex Dyes, Materials Sciences and Applications, Vol.11 No.10, 2020
• Shen-Kung Liao, Shin-Bin Wu, Chie-Hao Chao
• Citations: 3 (Details)

• Characterization of Particleboard Produced from Residues of Plantain pseudostem, Cocoa Pod and Stem and Ceiba, Materials Sciences and Applications, Vol.11 No.12, 2020
• Stephen J. Mitchual, Prosper Mensah, Kwasi Frimpong-Mensah, Emmanuel Appiah-Kubi
• Citations: 3 (Details)

• Numerical Evaluation of the Surface Energy of Polyhedral Nanoparticles, Materials Sciences and Applications, Vol.11 No.12, 2020
• Takuya Uehara, Junya Fujiwara
• Citations: 3 (Details)

• Development of Tailored Structure and Tensile Properties of Thermomechanical Treated Micro Alloyed Low Carbon Dual Phase Steel, Materials Sciences and Applications, Vol.11 No.12, 2020
• Hany Khalifa, G. M. Megahed, Taher El-Bitar, Mohamed A. Taha
• Citations: 3 (Details)

• High Quality Bio-Oil Obtained from Catalyzed Pyrolysis of Olive Mill Solid Wastes in a Bi-Functional Reactor, Materials Sciences and Applications, Vol.12 No.1, 2021
• Nabil Tabaja, Ahmad Kassas, Soumaya Hamieh, Rana Haidar, Maria-Laura Foddis, Joumana Toufaily, T. Jean Daou, Tayssir Hamieh
• Citations: 2 (Details)

• Alloy 718 Subsea Bolt in Relation to Surface Cracking: A Microstructural Perspective, Materials Sciences and Applications, Vol.11 No.12, 2020
• B. Saleem, H. B. Dong, V. Patel
• Citations: 2 (Details)

• Surface Modification of Barium Sulfate Particles, Materials Sciences and Applications, Vol.12 No.1, 2021
• Jérémy Longlade, Christelle Delaite, Anne-Sophie Schuller
• Citations: 2 (Details)

• Characterization of CdZnTeSe Nuclear Detector Chemically Etched in Bromine Methanol, Materials Sciences and Applications, Vol.12 No.8, 2021
• Ezekiel O. Agbalagba, Mebougna L. Drabo, Stephen U. Egarievwe, Utpal N. Roy, Amir H. Davis, Mordecai B. Israel, Parion L. Alexander, Ralph B. James
• Citations: 2 (Details)

• Feasibility of 0.02% Nb-Based Microalloyed Steel for the Application of One-Step Quenching and Partitioning Heat Treatment, Materials Sciences and Applications, Vol.12 No.8, 2021
• Basem Tarek, Eman EL-Shenawy, Ahmed El-Sabbagh, Mohamed A. Taha
• Citations: 2 (Details)

• Characterization of Fired Clay Bricks for an Economic Contribution of the Exploitation of Thicky Clay Deposit, Materials Sciences and Applications, Vol.12 No.9, 2021
• Ibrahima Diao, Mababa Diagne, Ibrahima Dia
• Citations: 2 (Details)

• Mechanical Characterization and Micro-Wear of FeB-Fe₂B Layers on Boriding AISI D2 and AISI 4340 Steels, Materials Sciences and Applications, Vol.12 No.7, 2021
• Suellen Terroso de Mendonça Ferreira, André Luiz Klemes Bacco, Eduardo Mauro do Nascimento, Carlos Maurício Lepienski
• Citations: 2 (Details)

• The Effect of Annealing Temperature and Reactive Gases on Optical Properties of Cu₂O Thin Films, Materials Sciences and Applications, Vol.12 No.5, 2021
• Radu Bunea, Ashwin Kumar Saikumar, Kalpathy Sundaram
• Citations: 2 (Details)

• Dynamic Flexural Modulus and Low-Velocity Impact Response of Supercomposite^TM Laminates with Vertical Z-Axis Milled Carbon Fiber Reinforcement, Materials Sciences and Applications, Vol.12 No.4, 2021
• Suman Babu Ukyam, Raju P. Mantena, Damian L. Stoddard, Arunachalam M. Rajendran, Robert D. Moser
• Citations: 2 (Details)

• Raman Spectroscopy Analysis of Wollastonite/Tricalcium Phosphate Glass-Ceramics after Implantation in Critical Bone Defect in Rats, Materials Sciences and Applications, Vol.13 No.5, 2022
• Mauricio Mitsuo Monção, Isabela Cerqueira Barreto, Fúlvio Borges Miguel, Luiz Fernando Cappa De Oliveira, Raul Garcia Carrodeguas, Roberto Paulo Correia De Araújo
• Citations: 2 (Details)

• Effects of Vanadium on Structure and Tensile Properties of Tempcore Steel Bars, Materials Sciences and Applications, Vol.13 No.5, 2022
• Hany Khalifa, A. El-Kady
• Citations: 2 (Details)

• Structural and Mechanical Properties of Alumina-Zirconia (ZTA) Composites with Unstabilized Zirconia Modulation, Materials Sciences and Applications, Vol.12 No.11, 2021
• Md. Abdul Gafur, Md. Al-Amin, Md. Saifur Rahman Sarker, Md. Zahangir Alam
• Citations: 2 (Details)

• Dye Regeneration Kinetics of C343-Sensitized Nickel Oxide Investigated by Scanning Electrochemical Microscopy, Materials Sciences and Applications, Vol.13 No.1, 2022
• Anshebo Getachew Alemu
• Citations: 2 (Details)

• Polylactic Acid (PLA) Foaming: Design of Experiments for Cell Size Control, Materials Sciences and Applications, Vol.13 No.2, 2022
• Miada Abubaker Osman, Nick Virgilio, Mahmoud Rouabhia, Frej Mighri
• Citations: 2 (Details)

• Electronic Structure of Single-Crystal CaF₂(111) with Nanoscale Phases of Ca and Si, Materials Sciences and Applications, Vol.9 No.12, 2018
• Yokub Suvonovich Ergahov, Boltakhodja Ermatovich Umirzakov, Gulmira Khalmuratovna Allayarova
• Citations: 2 (Details)

• Thermo-Physical Properties of Al-Mg Alloy in Liquid State at Different Temperatures, Materials Sciences and Applications, Vol.9 No.10, 2018
• Shashit Kumar Yadav, Lok Narayan Jha, Arjun Dhungana, Upendra Mehta, Devendra Adhikari
• Citations: 2 (Details)

• Non-Invasive and Non-Destructive Determination of Corneal and Scleral Biomechanics Using Vibrational Optical Coherence Tomography: Preliminary Observations, Materials Sciences and Applications, Vol.9 No.7, 2018
• Frederick H. Silver, Ruchit G. Shah, Dominick Benedetto
• Citations: 2 (Details)

• Using Swellable Polymers as Structure Directing Scaffolds in Mesoporous Titania Synthesis, Materials Sciences and Applications, Vol.9 No.2, 2018
• Charalambos A. Papatryfonos, Charis R. Theocharis
• Citations: 2 (Details)

• Microstructure, Texture, Mechanical and Ballistic Properties Correlation of a Hot Rolled and Peak Aged AA-7017 Alloy Plate at Surface and Centre, Materials Sciences and Applications, Vol.8 No.13, 2017
• Pradipta Kumar Jena, Kandikattu Siva Kumar, Rajiv Kumar Mandal, Ashok Kumar Singh
• Citations: 2 (Details)

• Fabrication of Tungsten Carbide Films by Filtered Pulse Arc Deposition with Cemented Tungsten Carbide Cathodes, Materials Sciences and Applications, Vol.8 No.13, 2017
• Ryo Isono, Tsuyoshi Tanimoto, Yushi Iijima, Toru Harigai, Yoshiyuki Suda, Hirofumi Takikawa, Satoru Kaneko
• Citations: 2 (Details)

• Preparation and Characterization of Reduced Graphene-P3HT Composite Thin Films for Use as Transparent Conducting Electrodes, Materials Sciences and Applications, Vol.9 No.5, 2018
• Lam Minh Long, Dang Dinh Long, Nguyen Phuong Hoai Nam, Nguyen Trong Tinh, Sergei Antonovic Chizhik, Nguyen Nang Dinh
• Citations: 2 (Details)

• Mechanochemical Methods in the Production of High Purity Gases, Materials Sciences and Applications, Vol.9 No.5, 2018
• Konstantin Chuntonov, Boris Verbitsky, Alexey O. Ivanov, Victor L. Kozhevnikov
• Citations: 2 (Details)

• Influence of Benzenediols—Pyrocatechol and Resorcinol—On the Resistance of Portland Cement Mortars with Aluminum Sulfate to Sulfate Attack, Materials Sciences and Applications, Vol.9 No.2, 2018
• Alexey Brykov, Natalia Paritskaya, Alexander Velichko, Maxim Mokeev
• Citations: 2 (Details)

• Thermo-Stamping Process of Glass and Carbon-Fibre Reinforced Polymer Composites, Materials Sciences and Applications, Vol.11 No.5, 2020
• Walid Harizi, Zoheir Aboura, Mylène Deléglise-Lagardère, Valérie Briand
• Citations: 2 (Details)

• Improvements to Temperature, Warburg Impedance, and Voltage Computations for a Design-Based Predictive Model for Lithium-Ion Capacitors, Materials Sciences and Applications, Vol.11 No.6, 2020
• Davis George Moye, Pedro L. Moss, Dhevathi Rajan Rajagopalan Kannan, Xujie Chen, Omonayo Bolufawi, Wanjun Cao, Simon Y. Foo
• Citations: 2 (Details)

• The Effects of Fatigue Cracks on Fastener Loads during Cyclic Loading and on the Stresses Used for Crack Growth Analysis in Classical Linear Elastic Fracture Mechanics Approaches, Materials Sciences and Applications, Vol.11 No.7, 2020
• Claudiu Gudas
• Citations: 2 (Details)

• Study of CdZnTeSe Gamma-Ray Detector under Various Bias Voltages, Materials Sciences and Applications, Vol.11 No.8, 2020
• Mebougna L. Drabo, Stephen U. Egarievwe, Utpal N. Roy, Benicia A. Harrison, Carmella A. Goree, Emmanuel K. Savage, Ralph B. James
• Citations: 2 (Details)

• Films from an Aqueous Suspension of Alkaline Pretreated and Fine Milled Chicken Feathers, Materials Sciences and Applications, Vol.11 No.1, 2020
• Mika Vähä-Nissi, Panu Lahtinen, Emmi Nuutinen, Timo Kaljunen, Tiina Pöhler
• Citations: 2 (Details)

• Thermoforming Technique for Suppressing Reduction in Mouthguard Thickness, Materials Sciences and Applications, Vol.11 No.3, 2020
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 2 (Details)

• Thermomechanical Behavior and Corrosion Resistance of a 316 L Austenitic Stainless Steel, Materials Sciences and Applications, Vol.11 No.4, 2020
• Rafael P. Ferreira, Carmem C. F. Nascimento, Gedeon S. Reis, Eden S. Silva, Samuel F. Rodrigues
• Citations: 2 (Details)

• A Molecular Dynamics Study on the Effects of Lattice Defects on the Phase Transformation from BCC to FCC Structures, Materials Sciences and Applications, Vol.10 No.8, 2019
• Takuya Uehara
• Citations: 2 (Details)

• Corrosion Behavior of Reinforcement Steel Embedded in Cement Mortars Using Different Protection Systems, Materials Sciences and Applications, Vol.10 No.6, 2019
• Evgenia Voulgari, Aggeliki Zacharopoulou, Nikolaos Chousidis, George Batis
• Citations: 2 (Details)

• Synthesis of New Binder Polymers for Photolithographic Patterning of Black Pixel Define Layers of Organic Light Emitting Diode, Materials Sciences and Applications, Vol.10 No.11, 2019
• Genggongwo Shi, Kyeongha Baek, Seon Hong Ahn, Jun Bae, Jeseob Kim, Lee Soon Park
• Citations: 2 (Details)

• Nanostructure of Rutile TiO₂ Thin Films Prepared on Unheated Substrate by Dual Cathode DC Unbalanced Magnetron Sputtering, Materials Sciences and Applications, Vol.10 No.3, 2019
• Wichai Kongsri, Supanee Limsuwan, Surasing Chaiyakun, Pichet Limsuwan, Chittra Kedkaew
• Citations: 2 (Details)

• Permanent Rare-Earth Magnets—The Need to Protect Them against Corrosion, Materials Sciences and Applications, Vol.10 No.4, 2019
• Célia Aparecida Lino dos Santos, Zehbour Panossian
• Citations: 2 (Details)

• The Use of Fuzzy Logic in Predicting Percentage (%) Dilution of Weld during Tig Welding Process, Materials Sciences and Applications, Vol.10 No.5, 2019
• S. Nweze, J. Achebo
• Citations: 2 (Details)

• Viscoelastic Evaluation of Different Hyaluronic Acid Based Fillers Using Vibrational Optical Coherence Tomography, Materials Sciences and Applications, Vol.10 No.5, 2019
• Frederick H. Silver, Ruchit G. Shah, Nikita Kelkar, Dominick Benedetto, Dale DeVore, Justin Cohen
• Citations: 2 (Details)

• New Approach for Lead, Zinc and Copper Ions Elimination in Cyanidation Process to Improve the Quality of the Precipitate, Materials Sciences and Applications, Vol.6 No.2, 2015
• José R. Parga, Jesús V. Valdés, Jesús L. Valenzuela, Gregorio Gonzalez, L. María de J. Pérez, T. Francisco Cepeda
• Citations: 2 (Details)

• Surface Analysis Correlated with Structural and Mechanical Properties of Laser Irradiated Brass, Materials Sciences and Applications, Vol.6 No.1, 2015
• Shahbaz Ahmad, Shazia Bashir, Daniel Yousaf, Nisar Ali, Tousif Hussain
• Citations: 2 (Details)

• An Analysis of Varnish and Impregnation Processes for Combustion Temperature of Scotch Pine, Materials Sciences and Applications, Vol.6 No.1, 2015
• Musa Atar, Nihat Döngel, Hamza Çinar
• Citations: 2 (Details)

• Viscosity Effects of the Precursor Solution and Surface Structure of Gadolinium Oxide (Gd₂O₃) and Gadolinium Oxide Europium Doped (Gd₂O₃:Eu³⁺) Sol-Gel Films, Materials Sciences and Applications, Vol.5 No.14, 2014
• Quianna S. Johnson, Matthew Edwards, Josh Herring, Michael Curley
• Citations: 2 (Details)

• The Magnetoresistance of Nanostructured Co-ZnO Films with ZnO Buffer-Layers, Materials Sciences and Applications, Vol.5 No.14, 2014
• Xiaoli Li, Long Cheng, Long Cheng, Yalei Wang, Yan Gao, Zhiyong Quan, Xiufang Qin, Harry J. Blythe, Gillian A. Gehring, Xiaohong Xu
• Citations: 2 (Details)

• Lighting by Biogas Burners: Perspectives on Development in Brazil, Materials Sciences and Applications, Vol.5 No.9, 2014
• Silas Cardoso Santos, Chieko Yamagata, Sonia Mello-Castanho
• Citations: 2 (Details)

• Failure Analysis of an Aluminum Extension Portable Ladder, Materials Sciences and Applications, Vol.5 No.9, 2014
• Abdel-Hakim Bouzid
• Citations: 2 (Details)

• Synthesis of Hexagonal Boron Carbonitride without Nitrogen Void Defects, Materials Sciences and Applications, Vol.6 No.5, 2015
• Md. Abdul Mannan, Yuji Baba, Tetsuya Kida, Masamitsu Nagano, Hideyuki Noguchi
• Citations: 2 (Details)

• The Role of Silver Additions in Formation of Sn-Bi-Ag Semiconductor Alloys by Rapid Solidification, Materials Sciences and Applications, Vol.6 No.3, 2015
• Tarek El Ashram
• Citations: 2 (Details)

• Identification of Modal Loss Factor of a Sandwich Composite Structure with Polyethylene Terephthalate Core in the Aspect of Core Properties Determination, Materials Sciences and Applications, Vol.6 No.6, 2015
• Krzysztof Marynowski, Katarzyna Grochowska
• Citations: 2 (Details)

• Scanning Electron Micrographic Investigation of Explanted (Used) Metallic Biomedical Implants for Corrosion and Other Mechanical Damage Responsible for Failure, Materials Sciences and Applications, Vol.6 No.10, 2015
• Vaibhav Trivedi, Vishal Saxena, Anupam Srivastav
• Citations: 2 (Details)

• Electrical Homo-Junction Delineation Techniques: A Comparative Study, Materials Sciences and Applications, Vol.7 No.6, 2016
• Nicolas Vivet, Mélanie Diogo, Amandine Aubert, Tony Moinet, Fabien Allanic, Raphael Perdreau, Jean-Paul Rebrassé
• Citations: 2 (Details)

• Preparation and Characterization of La_0.67–x Li_3x TiO₃ Solid-State Electrolyte Used for Electrochromic Mirrors, Materials Sciences and Applications, Vol.7 No.11, 2016
• Le Dinh Trong, Nguyen Nang Dinh, Do Hong Thanh
• Citations: 2 (Details)

• Evaluation of Stress Corrosion Cracking Damage to an API 5L X52 Pipeline Transporting Ammonia: A Case Study, Materials Sciences and Applications, Vol.7 No.10, 2016
• José Luis Mora-Mendoza, Mónica Jazmín Hernández-Gayosso, Daniel Antonio Morales-Serrat, Octaviano Roque-Oms, Digna Alejandra Del Angel, Gerardo Zavala-Olivares
• Citations: 2 (Details)

• Analysis of Super Duplex Stainless Steel Properties as an Austenite-Ferrite Composite, Materials Sciences and Applications, Vol.6 No.12, 2015
• Fady M. Elsabbagh, Ahmed El-Sabbagh, Rawia M. Hamouda, Mohamed A. Taha
• Citations: 2 (Details)

• The Thermal Stability of (CaTiO₃)1-x (Cr_3/4Fe_5/4O₃)_x Ceramic Composites in the Microwave Region, Materials Sciences and Applications, Vol.7 No.4, 2016
• Francisco Nivaldo Aguiar Freire, Manoel Roberval Pimentel Santos, Hélio Henrique Barbosa Rocha, Ana Fabiola Leite Almeida, Selma Elaine Mazzetto, Antonio Jefferson Mangueira Sales, Antonio Sergio Bezerra Sombra
• Citations: 2 (Details)

• Fractal Characteristics of Microporous Adsorbents, Materials Sciences and Applications, Vol.8 No.8, 2017
• Vladimir V. Kutarov, Eva Schieferstein, Yuriy Leonidovych Zub, Erich Robens
• Citations: 2 (Details)

• Mechanical Properties of Lab Joint Composite Structure of Glass Fiber Reinforced Polymers, Materials Sciences and Applications, Vol.8 No.7, 2017
• Mohammed Y. Abdellah, Mohamed Q. Kamal, Mohammad S. Alsoufi, Nouby M. Ghazaly, G. T. Abdel-Jaber
• Citations: 2 (Details)

• Prediction of Weld Joint Shape and Dimensions in Laser Welding Using a 3D Modeling and Experimental Validation, Materials Sciences and Applications, Vol.8 No.11, 2017
• Laurent Jacques, Abderrazak El Ouafi
• Citations: 2 (Details)

• Deposition and Characterization of Multilayer DLC/BN Films, Materials Sciences and Applications, Vol.8 No.10, 2017
• Honei Chin, Chavin Jongwannasiri, Shuichi Watanabe
• Citations: 2 (Details)

• Effect of Additional Surfaces on Ordinary Portland Cement Early-Age Hydration, Materials Sciences and Applications, Vol.8 No.12, 2017
• Tapio Vehmas, Anna Kronlöf, Andrzej Cwirzen
• Citations: 2 (Details)

• Analysis of Deformation in a High Entropy Alloy Using an Internal State Variable Model, Materials Sciences and Applications, Vol.8 No.6, 2017
• Aaron Stein, Paul S. Follansbee
• Citations: 2 (Details)

• Alkyl Thiophene Vinylene Electropolimerization in C₈mimPF₆, Potential Use in Solar Cells, Materials Sciences and Applications, Vol.8 No.5, 2017
• Vania Rojas, Francisco Martínez, Jean Christian Bernède, Linda Cattin Guenadez, Alexander Efimov, Helge Lemmetyinen
• Citations: 2 (Details)

• Spin-Spin Relaxation Time to Evaluate Degradation of HIPS/Organoclaynano Composites by Aging, Materials Sciences and Applications, Vol.8 No.5, 2017
• Paulo Sergio Rangel Cruz da Silva, Gisele Cristina Valle Iulianelli, Maria Inês Bruno Tavares
• Citations: 2 (Details)

• Lime-Barium and Lime-Zinc Raw Glazes with Raw Materials from Tanzania and Cameroon, Materials Sciences and Applications, Vol.2 No.10, 2011
• U. Chinje Melo, Ndigui Billong, E. C. Kimaro
• Citations: 2 (Details)

• Aggregation Study of Ag-TiO₂ Composites, Materials Sciences and Applications, Vol.2 No.12, 2011
• María Eugenia Noriega-Treviño, Claudia Cristina Quintero-González, José Elpidio Morales-Sánchez, Jesús María Guajardo-Pacheco, Martha Eugenia Compeán-Jasso, Facundo Ruiz
• Citations: 2 (Details)

• Photoelectrochemical Production of Hydrogen in Aqueous Suspensions Nanoparticles Composites of CdS/ZnS, Materials Sciences and Applications, Vol.2 No.11, 2011
• Kasem K. Kasem, Melissa Dahn, Nida Zia, Aubrey Finney
• Citations: 2 (Details)

• Alloying Behaviour of CuPd Liquid Alloy, Materials Sciences and Applications, Vol.2 No.8, 2011
• Bhrigunandan Prasad Singh, Devendra Adhikari, Indu Shekhar Jha, Jitendra Kumar, Ram Prasad Koirala
• Citations: 2 (Details)

• Short Circuit Thermally Stimulated Discharge Current Measurement on PMMA:PEMA:PVDF Ternary Blends, Materials Sciences and Applications, Vol.2 No.8, 2011
• A. K Gupta, A. Tiwari, R Bajpai, J. M Keller
• Citations: 2 (Details)

• The Structure and the Electrical Properties of Pb_0.95La_0.05[Zr_xTi_(0.95–x)(Mo_1/3,In_2/3)_0.05]_0.9875O₃ Ferroelectric Ceramics, Materials Sciences and Applications, Vol.2 No.9, 2011
• Malika Abba, Ahmed Boutarfaia
• Citations: 2 (Details)

• Structural Properties of Synthetic Na-Hectorite Exchanged with Heavy Metals, Materials Sciences and Applications, Vol.2 No.5, 2011
• Karmous Mohamed Salah
• Citations: 2 (Details)

• The Analysis of Stiffness for Rubbery Metallic Material Based on Mesoscopic Features, Materials Sciences and Applications, Vol.2 No.6, 2011
• Hong Zuo, Hongbai Bai, Yuhong Feng
• Citations: 2 (Details)

• FP-LMTO Investigation of the Structural and Electronic Properties of Cu_xAg_1–xI Alloys, Materials Sciences and Applications, Vol.2 No.7, 2011
• Mohammed Ameri, Noureddine Bouzouira, Mohammed Doui-Aici, Rabah Khenata, Abdelkader Yakoubi, Mohammed Maachou
• Citations: 2 (Details)

• Strengthening of Sewerage Systems with Composites Plates: Numerical Optimization, Materials Sciences and Applications, Vol.2 No.3, 2011
• Stephan Kesteloot, Chafika Djelal, Idriss Benslimane, Saïd Baraka
• Citations: 2 (Details)

• Cationic Microemulsion Polymerization of Alkyl Acrylates, Materials Sciences and Applications, Vol.1 No.5, 2010
• Issa Katime, Jesús Arellano, Eduardo Mendizábal, Jorge Flores
• Citations: 2 (Details)

• Effect of Microstructures and Material Compositions on Blister Formation, Materials Sciences and Applications, Vol.1 No.3, 2010
• Yunan Prawoto. Jern Phye Tan Tan, Choon Yong Loh
• Citations: 2 (Details)

• Optical Rotation of Linearly Polarized Light Propagating through a Nonideal 1D-Superlattice, Materials Sciences and Applications, Vol.1 No.1, 2010
• Vladimir V. Rumyantsev, Stanislav A. Fedorov
• Citations: 2 (Details)

• Microstructural Development of Fe-20mass%Cr Alloys and Pure Copper Processed by Equal-Channel Angular Pressing, Materials Sciences and Applications, Vol.4 No.4, 2013
• Muhammad Rifai, Ryosuke Haga, Hiroyuki Miyamoto, Hiroshi Fujiwara
• Citations: 2 (Details)

• Preparation of Thin Films by a Bipolar Pulsed-DC Magnetron Sputtering System Using Ca₃Co₄O₉ and CaMnO₃ Targets, Materials Sciences and Applications, Vol.3 No.9, 2012
• Weerasak Somkhunthot, Nuwat Pimpabute, Tosawat Seetawan
• Citations: 2 (Details)

• Annealing Effect on the Solid State and Optical Properties of αFe₂O₃ Thin Films Deposited Using the Aqueous Chemical Growth (ACG) Method, Materials Sciences and Applications, Vol.3 No.11, 2012
• S. L. Mammah, F. E. Opara, F. B. Sigalo, S. C. Ezugwu, F. I. Ezema
• Citations: 2 (Details)

• The High Energy Region of the Absorption Edge of a-Si:H, a Theoretical Study—III, Materials Sciences and Applications, Vol.3 No.8, 2012
• Salwan Kamal Jamil Al-Ani, Abdullah Ibrahim, Subhi Saeed Al-Rawi
• Citations: 2 (Details)

• Evaluation on Feasibility of Sintered Cattle Bone Powder as a Heavy Metal Adsorbent, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Dong-Heui Kwak, Mi-Sug Kim
• Citations: 2 (Details)

• Hollow Fiber Module Applied for Effective Proliferation and Harvest of Cultured Chondrocytes, Materials Sciences and Applications, Vol.4 No.8A, 2013
• Yoshiyuki Mori, Makoto Watanabe, Sakae Nakagawa, Yukiyo Asawa, Satoru Nishizawa, Kazumi Okubo, Hideto Saijo, Satoru Nagata, Yuko Fujihara, Tsuyoshi Takato, Kazuto Hoshi
• Citations: 2 (Details)

• Palladium Ultra Thin Layer Profiles Evaluation by Evanescent Light, Materials Sciences and Applications, Vol.4 No.9, 2013
• Nina Mirchin, Igor Lapsker, Ewdard Tannous, Aaron Peled
• Citations: 2 (Details)

• Photo-Electrochemical Studies on TiO₂-Doped Ce (III/IV) Oxides Nanoparticles in Aqueous Electrolytes, Materials Sciences and Applications, Vol.4 No.10, 2013
• Kasem K. Kasem, Heather Ramey, Valeed Ahmed
• Citations: 2 (Details)

• Preparation of Composite Particles by Forming Pickering Emulsion Followed by Drying-In-Liquid and Effect of Stepwise Addition of Solid Powder on Structure of Composite Particles, Materials Sciences and Applications, Vol.4 No.12, 2013
• Yasushi Akutsu, Yoshinari Taguchi, Masato Tanaka
• Citations: 2 (Details)

• Mechanical Properties of Composite Mortars Using Flurogypsum and PVC Particles, Materials Sciences and Applications, Vol.5 No.4, 2014
• Luisa Maria Flores-Vélez, Hector Valle, Gabriel García, Roberto Torres, Martha Lomelí, Octavio Domínguez
• Citations: 2 (Details)

• Fabrication of Silicon Carbide Quantum Dots via Chemical-Etching Approach and Fluorescent Imaging for Living Cells, Materials Sciences and Applications, Vol.5 No.4, 2014
• Yuepeng Song, Dongsheng Gao, Hyoung Seop Kim, Cuiqin Qu, Jie Kang, Yanmin Zhu, Ziping Liu, Jing Guo, Lingfeng Xu, Chong Soo Lee
• Citations: 2 (Details)

• Thermally Induced Nanocrystal Array of Poly(N-Vinylcarbazole) on Si-Wafer Substrate, Materials Sciences and Applications, Vol.5 No.5, 2014
• Kazushi Yamada, Yasuyuki Tsuboi
• Citations: 1 (Details)

• Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO₂ Coating on Commercially Pure Ti Discs, Materials Sciences and Applications, Vol.5 No.5, 2014
• Sinem Yeniyol, Bahadır Kepenek, Ayhan Bilir, Ali Fuat Çakır, Nilüfer Bölükbaşı, Mefail Yeniyol, Tayfun Özdemir
• Citations: 1 (Details)

• Phase Transition in Superconducting Thin Films of Tl System Employing a One-Zone Furnace and Deposited by Spray Pyrolysis, Materials Sciences and Applications, Vol.4 No.11, 2013
• Jorge Luis Rosas-Mendoza, L. Perez-Arrieta, Miguel Aguilar-Frutis, Ciro Falcony, R. Vázquez-Arreguín, Alejandro Miguel Rosas-Mendoza
• Citations: 1 (Details)

• Light Soaking Induced Increase in Conversion Efficiency in Solar Cells Based on In(OH)_xS_y/Pb(OH)_xS_y, Materials Sciences and Applications, Vol.4 No.11, 2013
• Robinson Musembi, Bernard Aduda, Julius Mwabora, Marin Rusu, Kostantinos Fostiropoulos, Martha Lux-Steiner
• Citations: 1 (Details)

• Investigation on the Microstructure and Electrical Properties of the Compositionally Modified PZT Ceramics Prepared by Mixed-Oxide Method, Materials Sciences and Applications, Vol.4 No.11, 2013
• Malika Abba, Ahmed Boutarfaia, Zelikha Necira, Noura Abdessalem, Hayet Menasra, Abdelhek Meklid
• Citations: 1 (Details)

• The Study of a New Ceramic PZT Material Pb_1-0.04Sm_0.02Nd_0.02[(Zr_0.55,Ti_0.45)_1-2x,x(Y_2/3,Mo1/3), x(Y_2/3,Ni_1/3)]O₃ with SEM and X-Ray Diffraction, Materials Sciences and Applications, Vol.4 No.10, 2013
• Oum Keltoum Kribaa, Ahmed Boutarfaia
• Citations: 1 (Details)

• Microstructure and Dielectric Properties of PZS-PLZT Ceramics System, Materials Sciences and Applications, Vol.4 No.8, 2013
• Sakri Adel, Boutarfaia Ahmed
• Citations: 1 (Details)

• Chemical and Morphological Surface Modification of Epoxy Based Thermosets, Materials Sciences and Applications, Vol.4 No.7B, 2013
• Marcela E. Penoff, Patricia A. Oyanguren, Wido Schreiner, Pablo E. Montemartini
• Citations: 1 (Details)

• Roughness Control of Layer-by-Layer and Alternative Spray Films from Congo Red and PAH via Laser Light Irradiation, Materials Sciences and Applications, Vol.3 No.8, 2012
• Gleidson Cardoso, Romário J. da Silva, Rafael R. G. Maciel, Nara C. de Souza, Josmary R. Silva
• Citations: 1 (Details)

• Effect of Radial Expansion of Cr-Mo Steel Tubes on Their Corrosion Behavior in Sea Water, Materials Sciences and Applications, Vol.3 No.9, 2012
• A. C. Seibi, P. Rostron, A. Elramady, B. Mishra, O. Al Nazer, S. Al Ameri
• Citations: 1 (Details)

• Electrodeposition of Bi-Sb alloy using Cu electrodes, Materials Sciences and Applications, Vol.3 No.7, 2012
• Masato Ohmukai, Akira Tsuyoshi
• Citations: 1 (Details)

• Process Adaption and Modifications of a Nutrient Removing Wastewater Treatment Plant in Sri Lanka Operated at Low Loading Conditions, Materials Sciences and Applications, Vol.4 No.5, 2013
• Johanna Berg, Stig Morling
• Citations: 1 (Details)

• Detection of Corrosion Processes in Metallic Samples of Copper by CND Control, Materials Sciences and Applications, Vol.4 No.4, 2013
• Radouane Daira, Vincent Chalvedin, Mohamed Boulhout
• Citations: 1 (Details)

• Minimization of Stock Weight during Close-Die Forging of a Spindle, Materials Sciences and Applications, Vol.4 No.4, 2013
• Hamzah Ssemakula
• Citations: 1 (Details)

• Effect of Different Eggshell Powder on Appearance of Eggshell Maki-e, Materials Sciences and Applications, Vol.4 No.2, 2013
• Yutaro Shimode, Chieko Narita, Atsushi Endo, Kazushi Yamada
• Citations: 1 (Details)

• Hydrogen Absorption and Electrochemical Properties of As-Quenched Nanocrystalline Mg20Ni10 – xCux (x = 0 – 4) Alloys, Materials Sciences and Applications, Vol.1 No.3, 2010
• Jinliang Gao, Zhonghui Hou, Qilu Ge, Dongliang Zhao, Shihai Guo, Yanghuan Zhang
• Citations: 1 (Details)

• Electronic Transport Study of ZnTe and ZnSe, Materials Sciences and Applications, Vol.2 No.5, 2011
• Siham Khedim, Nasr-Eddine Chabane Sari, Boumediene Benyoucef, Benyounes Bouazza
• Citations: 1 (Details)

• Optimization in Autoclave Process to Produce Durable Aluminium Composite, Materials Sciences and Applications, Vol.2 No.5, 2011
• Handoko Subawi
• Citations: 1 (Details)

• Effects of Solution Atoms and Precipitates on Isochronal Annealing Behavior of Cold-Rolled Squeeze-Cast SiCw/Al Composites, Materials Sciences and Applications, Vol.2 No.5, 2011
• Wenglong Zhang, Mingyuan Gu
• Citations: 1 (Details)

• Investigation of Electrical Transport in PECVD Grown a-SiC_x:H Thin Film, Materials Sciences and Applications, Vol.2 No.8, 2011
• Orhan Özdemir, Kutsal Bozkurt, Kubilay Kutlu
• Citations: 1 (Details)

• The Physical and Biological Properties of NanoTiO₂ Material, Materials Sciences and Applications, Vol.2 No.7, 2011
• Xiao Feng Pang
• Citations: 1 (Details)

• Growth of Carbon Nanotubes by Pyrolysis of Composite Film of Poly (Vinyl Alcohol) and Modified Fly Ash, Materials Sciences and Applications, Vol.3 No.2, 2012
• Dilip C. D. Nath, Veena Sahajwalla
• Citations: 1 (Details)

• Martensitic Characterization of the Ti_45.3Ni_54.7 Melt Spun Alloy, Materials Sciences and Applications, Vol.2 No.9, 2011
• Geroge C. S. Anselmo, Walman Benicio de Castro, Carlos J. de Araújo
• Citations: 1 (Details)

• Effect of Electric Field Strength and Water Content on the Electrorheology of Silica Dispersions, Materials Sciences and Applications, Vol.8 No.4, 2017
• Habauka M. Kwaambwa
• Citations: 1 (Details)

• Synthesis of Co-Cr-Mo Fluorapatite Nano-Composite Coatings by Pulsed Laser Deposition for Dental Applications, Materials Sciences and Applications, Vol.8 No.2, 2017
• Osama Khfagi, Ntevheleni Thovhogi, Dhiro Gihwala, Malik Maaza, Johan André Mars
• Citations: 1 (Details)

• Impact Properties of Austempered Spheroidal Graphite Cast Irons, Materials Sciences and Applications, Vol.8 No.13, 2017
• Tohru Nobuki, Minoru Hatate, Toshio Shiota
• Citations: 1 (Details)

• Magnet Formation by the Surface Modification of Diamond with Manganese Detected by the Magnetic Flux Density on the Surface, Materials Sciences and Applications, Vol.8 No.8, 2017
• Takahisa Yamazaki, Ryusei Ninomiya
• Citations: 1 (Details)

• Residual Stresses and Micro-Hardness Testing in Evaluating the Heat Affected Zone’s Width of Ferritic Ductile Iron Arc Welds, Materials Sciences and Applications, Vol.7 No.1, 2016
• Georgios K. Triantafyllidis, Dimitrios I. Zagliveris, Dionysios L. Kolioulis, Christos S. Tsiompanis, Titos N. Pasparakis, Athanasios P. Gredis, Melina L. Sfantou, Ioannis E. Giouvanakis
• Citations: 1 (Details)

• Isothermal and Non-Isothermal Crystallization Kinetics of Conductive Polyvinylidene Fluoride/Poly(Ethylene Terephthalate) Based Composites, Materials Sciences and Applications, Vol.7 No.1, 2016
• Nafaa Athmouni, Jianbin Song, Frej Mighri, Saïd Elkoun
• Citations: 1 (Details)

• Carbon-13 Solid State NMR Techniques to Evaluate the Morphology of PP/TiO₂ Composites, Materials Sciences and Applications, Vol.7 No.1, 2016
• Igor Lopes Soares, Maria Inês Bruno Tavares, André Luis B. B. e Silva, Antonio Gabriel Malagueta Feio
• Citations: 1 (Details)

• Structural and Dielectric Properties of (Bi₂O₃Fe₂O₃)_0.4(Nb₂O₅)_0.6 for Different Sintering Temperature, Materials Sciences and Applications, Vol.7 No.8, 2016
• Sadia Tasnim Mowri, M. A. Gafur, Quazi Delwar Hossain, Aninda Nafis Ahmed, Muhammad Shahriar Bashar
• Citations: 1 (Details)

• Humid Air Plasma Treatment of Birnessite Surface: Application to the Removal of Cochineal Red, Materials Sciences and Applications, Vol.6 No.11, 2015
• Wafa Chouchene, Nizar Bellakhal
• Citations: 1 (Details)

• Observation of Environmental Stress Cracking in Polymethylmethacrylate by Using the Chemiluminescence Method, Materials Sciences and Applications, Vol.6 No.11, 2015
• Yuji Higuchi
• Citations: 1 (Details)

• ANN Based Model for Estimation of Transformation Hardening of AISI 4340 Steel Plate Heat-Treated by Laser, Materials Sciences and Applications, Vol.6 No.11, 2015
• Guillaume Billaud, Abderazzak El Ouafi, Noureddine Barka
• Citations: 1 (Details)

• Fabrication of Cellulose Based Reinforced Linear Low Density Polyethylene with Polyethylene Terephthalate Composite: Effect of Acacia catechu as Coupling Agent, Materials Sciences and Applications, Vol.6 No.11, 2015
• Lily R. Das, Mohammad Zahirul I. Mollah, Jahid M. M. Islam, Shireen Akhter, Farid Ahmed, Mubarak Ahmad Khan
• Citations: 1 (Details)

• A Study of the Replacement of Materials in Smart Card, Materials Sciences and Applications, Vol.6 No.9, 2015
• Md. Khalilur Rahma, Raphaël Marchand, Budrun Neher
• Citations: 1 (Details)

• Studies of Oxide Layers Grown at 260°C on A106 B Carbon Steel in Aqueous Medium with Ethanolamine or Morpholine, Materials Sciences and Applications, Vol.6 No.9, 2015
• Ana Maria Olmedo, Roberto Bordoni
• Citations: 1 (Details)

• Inclusion-Interaction Assembly Strategy for Constructing pH/Redox Responsive Micelles for Controlled Release of 6-Mercaptopurine, Materials Sciences and Applications, Vol.6 No.7, 2015
• Mingyuan Tan, Hua Zheng, Xueqiong Zhang, Zhiyan Yu, Zhao Ye, Liyan Shi, Kaikai Ding
• Citations: 1 (Details)

• DNA Nano Devices as a Biased Random Walk Process: A Case Study of Isothermal Ratchet?, Materials Sciences and Applications, Vol.6 No.5, 2015
• Jean-Pierre Aimé, Juan Elezgaray
• Citations: 1 (Details)

• Characterization of Low Cost Ion Conducting Poly(AAc-co-DMAPMA) Membrane for Fuel Cell Application, Materials Sciences and Applications, Vol.6 No.3, 2015
• Anup Das, Suddhasatwa Basu, Anil Verma, Keith Scott
• Citations: 1 (Details)

• Effects of Si-Layer-Thickness Ratio on UV-Light-Emission Intensity from Si/SiO₂ Multilayered Thin Films Prepared Using Radio-Frequency Sputtering, Materials Sciences and Applications, Vol.6 No.3, 2015
• Kenta Miura, Hitomi Hoshino, Masashi Honmi, Osamu Hanaizumi
• Citations: 1 (Details)

• Performance Evaluation of a New Type of Polymer Profile Control Agent, Materials Sciences and Applications, Vol.6 No.5, 2015
• Qingwang Liu, Zhe Zhang, Zhenzhong Fan, Zhenzhong Fan, Jigang Wang
• Citations: 1 (Details)

• Preparation of Porous Silicone Resin Sheet with Phase Inversion in Parallel with Non Solvent Induced Phase Separation and Application to Hollow Particle Formation, Materials Sciences and Applications, Vol.5 No.9, 2014
• Takuya Yokoyama, Yoshinari Taguchi, Masato Tanaka
• Citations: 1 (Details)

• Risk Points of Flame Retardant Textiles by Halogen and Halogen-Free Laminating Film, Materials Sciences and Applications, Vol.5 No.11, 2014
• Yoon Jeong Baek, Jeoung Hwa Shin
• Citations: 1 (Details)

• Microscopic Characterisation of Pinus sylvestris Cell Structures under Compression Loading, Materials Sciences and Applications, Vol.5 No.14, 2014
• Ezgi Günay, Hamad Golmohammadi, Şükrü Tayfun Kaya
• Citations: 1 (Details)

• Study on Properties of Silver Powder for Maki-e, Materials Sciences and Applications, Vol.6 No.1, 2015
• Chieko Narita, Yutaro Shimode, Kazushi Yamada
• Citations: 1 (Details)

• Heat Resistant Properties of Some Elements-Incorporated Diamond-Like Carbon Films and Their Trial Applications for Micro End Mill Coatings, Materials Sciences and Applications, Vol.6 No.1, 2015
• Chavin Jongwannasiri, Nutthanun Moolsradoo, Shuichi Watanabe
• Citations: 1 (Details)

• Study of the (Ca_1–xSr_x) RuO₃ System with Nano-Crystals Prepared by the Solid-State Reaction Method, Materials Sciences and Applications, Vol.6 No.1, 2015
• Adolfo Quiroz, Elizabeth Chavira, José Eduardo Espinosa, Rodolfo Palomino-Merino, Ernesto Esteban Marinero, Masaya Nishioka, Valentín García-Vázquez
• Citations: 1 (Details)

• Study the Effect of Ruthenium Dye Layer on Negative Capacitance in Solar Cells Based on the Nc-TiO₂ Semiconducting Polymer Heterojunction, Materials Sciences and Applications, Vol.6 No.1, 2015
• H. Al-Dmour
• Citations: 1 (Details)

• A New Method to Determine the Maximum Value of the Track Length of Alpha Particle in CR-39 Detector, Materials Sciences and Applications, Vol.6 No.2, 2015
• Hussein A. Ahmed, A. Mohammed, A. Said Ahmad
• Citations: 1 (Details)

• Difference in Surface Roughness of Ethylene-Vinyl-Acetate Sheet before and after Application of Finishing Liquid: Part 2 Changes over Time in Surface Roughness, Materials Sciences and Applications, Vol.10 No.6, 2019
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 1 (Details)

• Corrosion of High Carbon Steel by Bacteria under Aerobic and Anaerobic Conditions, Materials Sciences and Applications, Vol.10 No.3, 2019
• R. C. Nwokorie, C. O. Nweke, S. I. Umeh, F. C. Ihenetu, O. R. Nlemolisa, U. N. Kemka, C. C. Obasi, C. I. Nnadi, K. H. Uzoho, C. C. Ejide
• Citations: 1 (Details)

• Study of Dielectric and Thermal Conductivity Characteristics of Polyimide Composite, Materials Sciences and Applications, Vol.10 No.3, 2019
• Meehye Oh, Yeoseong Yoon, Eunjin Jang, Dongjoon Moon
• Citations: 1 (Details)

• Microstructure and Quasi-Static Mechanical Behavior of Cryoforged AA2519 Alloy, Materials Sciences and Applications, Vol.10 No.2, 2019
• Amin Azimi, Gbadebo Moses Owolabi, Hamid Fallahdoost, Nikhil Kumar, Horace Whitworth
• Citations: 1 (Details)

• High-Density Polyethylene Based on Exfoliated Graphite Nanoplatelets/Nano-Magnesium Oxide: An Investigation of Thermal Properties and Morphology, Materials Sciences and Applications, Vol.10 No.3, 2019
• A. I. Alateyah
• Citations: 1 (Details)

• Fundamental Mechanism of Slow Crack Growth in Semi-Crystalline Polymers under a Constant Load, Materials Sciences and Applications, Vol.10 No.11, 2019
• Norman Brown
• Citations: 1 (Details)

• Crack Prediction Model for Concrete Affected by Reinforcement Corrosion, Materials Sciences and Applications, Vol.10 No.6, 2019
• Jeb M. Stefan, Luz M. Calle, Sven E. Eklund, Mark R. Kolody, Kunal Kupwade-Patil, Eliza L. Montgomery, Henry E. Cardenas
• Citations: 1 (Details)

• Comparison of Textural Characteristics of Ceria Solids Prepared via Triton X Reverse Micelles and in Situ Synthesized Ce(OⁱPr)₄ and Ce(OⁱPr) ₃ Precursors, Materials Sciences and Applications, Vol.10 No.9, 2019
• Polyxeni Paschalidou, Charis R. Theocharis
• Citations: 1 (Details)

• Temperature-Programmed Reduction and Dispersive X-Ray Absorption Spectroscopy Studies of CeO₂-Based Nanopowders for Intermediate-Temperature Solid-Oxide Fuel Cell Anodes, Materials Sciences and Applications, Vol.10 No.10, 2019
• Marina S. Bellora, Joaquín Sacanell, Cristián Huck-Iriart, Analía L. Soldati, Susana A. Larrondo, Diego G. Lamas
• Citations: 1 (Details)

• Cerium Oxide Film Growth Using Radio-Frequency Sputtering Process, Materials Sciences and Applications, Vol.11 No.5, 2020
• Pao-Chi Chen, Xiao An Wang
• Citations: 1 (Details)

• The Colored Oil Property Effect on Switching Behavior of Electro-Fluidic Display, Materials Sciences and Applications, Vol.11 No.2, 2020
• Yuanyuan Guo, Yong Deng, Biao Tang, Alex Henzen, Guofu Zhou
• Citations: 1 (Details)

• Wettability, Thermal and Sliding Behavior of Thermally Sprayed Fly Ash Premixed Red Mud Coatings on Mild Steel, Materials Sciences and Applications, Vol.11 No.1, 2020
• Harekrushna Sutar, Birupakshya Mishra, Rabiranjan Murmu, Sangram Patra, Sarat Chandra Patra, Subash Chandra Mishra, Debashis Roy
• Citations: 1 (Details)

• Low-Temperature Formation of a WO₃ Thin Film by the Sol-Gel Method Using Photo-Irradiation and Fabrication of a Flexible Hydrogen Sensor, Materials Sciences and Applications, Vol.11 No.2, 2020
• Tomoji Ohishi, Kenta Ueguri, Keigo Nakamura
• Citations: 1 (Details)

• Controlling Softened State of Mouthguard Sheet during Thermoforming to Ensure Thickness, Materials Sciences and Applications, Vol.11 No.7, 2020
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 1 (Details)

• Observations on Arrhenius Degradation of Lithium-Ion Capacitors, Materials Sciences and Applications, Vol.11 No.7, 2020
• Davis George Moye, Pedro L. Moss, Xujie Chen, Wanjun Cao, Simon Foo
• Citations: 1 (Details)

• Mouthguard Thermoforming Method to Decrease Palatal Thickness While Maintaining Labial and Buccal Thickness, Materials Sciences and Applications, Vol.11 No.6, 2020
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 1 (Details)

• An Assessment of Rare Earth Aluminates as Possible Radiation Shields for Artificial Satellites in Low Earth Orbit, Materials Sciences and Applications, Vol.9 No.4, 2018
• Ernesto Ortiz, José Francisco Valdés-Galicia, Rocío García, Lorenzo M. Martínez de la Escalera, Marcos Anzorena, Lorenzo Martínez-Gómez
• Citations: 1 (Details)

• Extended Anode Effect for Tube Inner Coating of Non-Conductive Ceramics by Pulsed Coaxial Magnetron Plasma, Materials Sciences and Applications, Vol.9 No.1, 2018
• Musab Timan Idriss Gasab, Hiroyuki Sugawara, Kei Sakata, Hiroshi Fujiyama
• Citations: 1 (Details)

• Study of Structural and Dielectrical Properties of Lead Free Polycrystalline Electro Ceramics Ba₅CaTi₂Nb₈O₃₀ (BCTN) for Microwave Tunable Device Applications, Materials Sciences and Applications, Vol.9 No.1, 2018
• Shilpi Jindal, Sheela Devi, Ajay Vasishth, Gagan Kumar
• Citations: 1 (Details)

• Ageing Behavior of LiNi_0.80 Co_0.15Al_0.05O₂ Cathode Based Lithium Ion Cells—Influence of Phase Transition Processes, Materials Sciences and Applications, Vol.9 No.1, 2018
• Christopher Betzin, Holger Wolfschmidt
• Citations: 1 (Details)

• Rylene Dielectrophores for Capacitive Energy Storage, Materials Sciences and Applications, Vol.9 No.6, 2018
• Andrey Borzenko, Carine Edder, Lev Mourokh, Pavel Lazarev
• Citations: 1 (Details)

• Structure Refinement of Mn-Substituted LiMn_xFe1-xPO₄, Materials Sciences and Applications, Vol.9 No.6, 2018
• Masakazu Togo, Atsushi Nakahira
• Citations: 1 (Details)

• Molecular Materials for Energy Storage, Materials Sciences and Applications, Vol.9 No.6, 2018
• Lev Mourokh, Carine Edder, Wolfgang Mack, Pavel Lazarev
• Citations: 1 (Details)

• Progressive Analysis of Bearing Failure in Pin-Loaded Composite Laminates Using an Elasto-Plastic Damage Model, Materials Sciences and Applications, Vol.9 No.7, 2018
• Kang Xue
• Citations: 1 (Details)

• Effect of Substituting a Fraction of Cu by La on the Transport Properties of YBa₂(Cu_1−xLa_x)₃O_7−δ Superconductor (0 ≤ x ≤ 0.06), Materials Sciences and Applications, Vol.9 No.10, 2018
• A. N. Fouda
• Citations: 1 (Details)

• Difference in Surface Roughness of Ethylene-Vinyl-Acetate Sheet before and after Application of Finishing Liquid, Materials Sciences and Applications, Vol.9 No.13, 2018
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 1 (Details)

• Simple and Selective Colorimetric Detection of Oxytetracycline Based on Fe(III) Ion-3,3’,5,5’-Tetramethylbenzidine, Materials Sciences and Applications, Vol.9 No.13, 2018
• Wenshu Yang, Zhigang Chen, Huaming Li
• Citations: 1 (Details)

• Ion Radiation Detection Using Implanted Ultrahigh Molecular Weight Polyethylene Structures (UHMWPE), Materials Sciences and Applications, Vol.10 No.1, 2019
• Maitha El-Muraikhi
• Citations: 1 (Details)

• Improved Transfer Process for the Fully Additive Manufacturing of a Conductive Layer-Stacked Polymeric Cantilever, Materials Sciences and Applications, Vol.10 No.1, 2019
• Shusuke Kanazawa, Yasuyuki Kusaka, Noritaka Yamamoto, Hirobumi Ushijima
• Citations: 1 (Details)

• Effect of Nanofillers on Abrasion Resistance of Carbon Fiber Reinforced Phenolic Friction Composites, Materials Sciences and Applications, Vol.10 No.1, 2019
• Bharath Basavaraj Pattanashetty, Suresha Bheemappa, Hemanth Rajashekaraiah, Somashekar Hirehally Mahadevappa
• Citations: 1 (Details)

• Determination of the Bromine, Manganese and Antimony in Nicotiana tabacum Solanaceae by Using the Neutron Activation Analysis Technique, Materials Sciences and Applications, Vol.13 No.2, 2022
• Tufic Madi Filho, Elson Barros Ferreira, José Roberto Berretta, Maria da Conceição Costa Pereira
• Citations: 1 (Details)

• Preparation and Properties of pH-Responsive Intelligent Medical Dressing Based on Bacterial Cellulose/Polyacrylic Acid, Materials Sciences and Applications, Vol.13 No.3, 2022
• Fei Jiang, Wen Zhang, Siyu Guo, Xin Zhang
• Citations: 1 (Details)

• Measurement of the Energy Absorbed during Nanoscale Deformation of Human Peritubular and Intertubular Dentin, Materials Sciences and Applications, Vol.13 No.4, 2022
• Jiahau Yan, Burak Taskonak, John J. Mecholsky Jr.
• Citations: 1 (Details)

• Antioxidant and Cytotoxic Activities of Clove Oil Nanoparticles and Evaluation of Its Size and Retention Efficiency, Materials Sciences and Applications, Vol.13 No.1, 2022
• Clara Teixeira de Oliveira, Maria Inês Bruno Tavares
• Citations: 1 (Details)

• Obtaining and Characterization of Biodegradable Composites Reinforced with Microcrystalline Cellulose Fillers, Materials Sciences and Applications, Vol.12 No.12, 2021
• Lucas Viana Costa, Gisele C. Valle Iulianelli, Paulo Sérgio Rangel C. da Silva, Fernanda A. dos Santos
• Citations: 1 (Details)

• Optical Properties of Iron to 30 eV, Materials Sciences and Applications, Vol.12 No.12, 2021
• Jerome K. Butler, Maria Martinez, Reyhane Kilci, Gary A. Evans
• Citations: 1 (Details)

• Electrospinning Polylactic Acid Polymer Membranes as Biological Sieve for Yeast and Bacteria, Materials Sciences and Applications, Vol.13 No.6, 2022
• Ernesto Suaste-Gómez, Grissel Rodríguez-Roldán, Ilian Pérez-Solis, Ana Laura Torres-Huerta, Carlos Cruz-Cruz, José Tapia-Ramírez
• Citations: 1 (Details)

• Dependence of Thermoformed Mouthguard Thickness on Model Height in Single-Layer and Laminated Mouthguards, Materials Sciences and Applications, Vol.13 No.8, 2022
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 1 (Details)

• Characterisation of Zinc Oxynitride Thin Films Prepared Using Zinc(II) Complex of Hexamethylenetetramine as the Precursor, Materials Sciences and Applications, Vol.13 No.8, 2022
• Olumide Oluwole Akinwunmi, Oluwaseun Philip Adelabu, Adetokunbo Temitope Famojuro, Olakunle A. Akinwumi, Priscilla Oluwatumilara Olaopa, Kehinde Folorunso Olafisan, Ezekiel Oladele Bolarinwa Ajayi
• Citations: 1 (Details)

• Electrical Properties of Compositional Al₂O₃ Supplemented HfO₂ Thin Films by Atomic Layer Deposition, Materials Sciences and Applications, Vol.13 No.9, 2022
• Yuxi Wang, Yong Zhang, Tingqu Wu, Weizheng Fang, Xufeng Kou, Tao Wu, Jangyong Kim
• Citations: 1 (Details)

• An Investigation of Thermomechanical Behavior of Tunisian Luffa Sponges’ Fibers, Materials Sciences and Applications, Vol.13 No.10, 2022
• Khaled Kharrati, Madiha Salhi, Jemaa Sliman, Ridha Abdeljabar
• Citations: 1 (Details)

• Application of the Mechanical Threshold Stress Model to Large Strain Processing, Materials Sciences and Applications, Vol.13 No.5, 2022
• Paul S. Follansbee
• Citations: 1 (Details)

• Effect of Model Height and Model Position on Forming Table on Mouthguard Thickness in Thermoforming Using Circular Frame, Materials Sciences and Applications, Vol.12 No.5, 2021
• Mutsumi Takahashi, Yogetsu Bando
• Citations: 1 (Details)

• Optimization of Activated Carbons Prepared from Parinari macrophylla Shells, Materials Sciences and Applications, Vol.12 No.5, 2021
• Maâzou Siragi D. B., Didier Desmecht, Halidou I. Hima, Ousmaila Sanda Mamane, Ibrahim Natatou
• Citations: 1 (Details)

• Influence of Types of Fillers on Workability, Bleeding, Compressive Strength, and Degree of Compaction of Hydraulic Concrete, Materials Sciences and Applications, Vol.12 No.6, 2021
• Mababa Diagne, Ibrahima Dia, Omar Gueye
• Citations: 1 (Details)

• Changing Mechanicals Characteristiques of Cementitious Materials Using Titanium Dioxide, Materials Sciences and Applications, Vol.12 No.6, 2021
• Valéry Kouandété Doko, Sena Peace Hounkpe, Smith Oyebissi Kotchoni, Li Hui, Abbas Tiambo Datchossa
• Citations: 1 (Details)

• Preparation of Flax Residue Activated Carbon by KOH Method and Its Electrode Performance, Materials Sciences and Applications, Vol.12 No.9, 2021
• Bing Wang, Shujun Li, Wenying Tan
• Citations: 1 (Details)

• Thermophysical and Mechanical Characterization of Poto-Poto Compressed Blocks for Use as Fill Material, Materials Sciences and Applications, Vol.12 No.10, 2021
• Kowa K. Eric, Jean Claude Damfeu, Pettang J. Ursulala, Joel Ducourneau, Paul Woafo, Chispin Pettang
• Citations: 1 (Details)

• Influence of Annealing Atmosphere on Varistor Property of TiO₂-Nb₂O₅-SrCO₃ Ceramics, Materials Sciences and Applications, Vol.12 No.11, 2021
• Kunyong Kang, Haodong Zhu, Gang Zhu, Shuduan Deng
• Citations: 1 (Details)

• A Comparative Study into the Engineering Properties of Neem Wood from Ghana, Materials Sciences and Applications, Vol.12 No.11, 2021
• Gladys A. Quartey, John Frank Eshun, Emmanuel Attitsogbui
• Citations: 1 (Details)