Dr. Masoud Haghshenasfard

Department of Chemical Engineering

Isfahan University of Technology, Iran

Email: haghshenas@cc.iut.ac.ir

Qualifications

2006 Ph.D., Department of Chemical Engineering, Sistan and Baluchestan University, Iran

2001 M.Sc., Department of Chemical Engineering, Sistan and Baluchestan University, Iran

Publications (Selected)

1. L. Asmaie, M. Haghshenasfard, A. Mehrabani-Zeinabad, M. Nasr Esfahany, Thermal performance analysis of nanofluids in a thermosyphon heat pipe using CFD modeling, Heat and Mass Transfer, 49(1), (2013).
2. M. Akhtari, M. Haghshenasfard, M. R. Talaie, Numerical and Experimental Investigation of Heat Transfer of AL2O3/Water Nanofluid in the Double Pipe and Shell and Tube Heat Exchangers, Numerical Heat Transfer, Part A, (2013).
3. H. Sadegh arani, M. Haghshenasfard, j. Salimi, Numerical study on the effect of cavitation on the flow and diesel fuel atomization characteristics, Chemical Engineering& Technology, 36(3), (2013).
4. I. Khonsha, M. Zivdar, M. Haghshenasfard, Prediction of Pressure Drop and Flooding In the Spinning Cone Distillation Column Using CFD Analysis, Arabian Journal of science and Technology, 10.1007, (2013).
5. M. Haghshenasfard et al, Numerical and experimental investigation of heat transfer of ZnO/Water nanofluid in the concentric tube and plate heat exchangers, Thermal Science Journal, Vol. 15, No. 1, (2011).
6. M. Haghshenasfard, CFD Analysis of Gas Absorption Process in a Randomly Packed Column, Case of Toluene Absorption from Air, Asian Journal of Chemistry, Vol. 23, No. 6, (2011).
7. M. Haghshenasfard et al, Numerical simulation of a supercritical CO2 geothermosiphon, International Communication in Heat and Mass Transfer, Vol. 37, 1447-1451, (2010).
8. M. Haghshenasfard, CFD modeling of heat transfer of CO2 at supercritical pressures flowing vertically in porous tubes, International Communication in Heat and Mass Transfer, 37, 98-102, (2010).
9. M Haghshenasfard , M. Zivdar, The university-industry relations, Iranian Chemical Engineering Journal, 9(52), (2010).
10. M Haghshenasfard et al, Numerical study of convective heat transfer of nanofluids in a circular tube, Two-phase model versus single-phase model, International Communication in Heat and Mass Transfer, 37, 91-97, (2010).
11. M. Haghshenasfard et al, Numerical Simulation of Hydrodynamics parameters of the Packed Columns: Effects of Geometrical Characteristics on Pressure Drop, Applied Sciences Journal, 7 (11): 1439-1445, (2009).
12. M. Zivdar, M Haghshenasfard, B. Tanhaei, A. Ayati, Investigation of Liquid Hold-Up and Pressure Drop in the Structure Packings using CFD Modeling, Iranian Chemical Engineering Journal, (In Persian) 8(45), (2009).
13. M Haghshenasfard et al, “CFD Simulation of Mass Transfer Efficiency and Pressure Drop in a Structured Packed Distillation Column”, Chemical Engineering & Technology, 30, No7, (2007).
14. M. Haghshenasfard et al., CFD simulation of Gas distribution Performance of Gas Inlet systems in packed columns, Chemical Engineering &Technology, 30, No. 9, (2007).
15. M. Zivdar. M. Haghshenasfard and Prince., “Evaluation of pressure drop and mass transfer characteristics of structured packing for production and separation of food flavors. Part One: pressure drop characteristic” IchemE Journal,Food and Bioproducts Processing, 84-c3, Sep(2006).
16. M. Zivdar. M. Haghshenasfard and Prince., “Evaluation of pressure drop and mass transfer characteristics of structured packing for production and separation of food flavors. Part Two: Mass transfer characteristics” IchemE Journal,Food and Bioproducts Processing, 84-c3, Sep(2006).
17. M. Zivdar. R. Rahimi, M. Nasr and M. Haghshenasfard” CFD simulations of Pressure drop in KATAPAK-S structured packing, Iranian Journal of Chemical Engineering, Vol. 2, No. 2 (2005).
18. M. Haghshenasfard et al., Hydrogenation of CO over a cobalt/cerium oxide catalyst.” Iranian Journal of Science and Technology Vol. 28, No. B6 (2004).
19. M. Haghshenasfard et al., Characterization of Copper-Manganese Oxide Catalyst and their precursors,” Iranian Journal of Chemical Engineering, Vol. 1, No. 2 (2004).