Prof. Yung C. Shin

Purdue University, USA



1984  Ph.D., University of Wisconsin, USA

1978  M.Sc., Korea Advanced Institute of Science and Technology, South Korea

1976  B.Sc., Seoul National University, South Korea

Publications (selected)

  1. Dandekar, C.R. and Shin, Y.C., “Molecular Dynamics Based Cohesive Zone Law for Describing Al-SiC Interface Mechanics”, Composites, Part A. 42, Issue 4 (2011) 355–363. doi:10.1016/j.compositesa.2010.12.005
  2. Xu, C. and Shin, Y.C., “A Self-tuning Multivariable Fuzzy Controller for General Multi-Input Multi-Output Nonlinear Systems”, International Scientific Journal, Engineering Applications of Artificial Intelligence, Volume 24, Issue 2, March 2011, Pages 238-250. Doi: 10.1016/j.engappai.2010.10.021
  3. Dandekar, C.R. and Shin, Y.C., “Effect of Porosity on the Interface Behavior of an Al2O3-Aluminum Composite: A Molecular Dynamics Study”, Composites Science and Technology, 71, 2011, pp. 350–356. Doi: 10.1016/j.compscitech.2010.11.029.
  4. Davis, T., Shin, Y.C. and Yao, B., “Observer-based Adaptive Robust Control of Friction Stir Welding Axial Force”, IEEE-ASME Trans. on Mechatronics, Vol. 16, No. 6, Dec. 2011. 10.1109/TMECH.2010.2071417
  5. Zhao, X. and Shin, Y.C., “Femtosecond Laser Drilling of High Aspect Ratio Microchannels in Glass”, Applied Physics A, Volume 104, Number 2, 713-719, 2011.
  6. Wen, S. and Shin, Y.C., “Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes”, Journal of Laser Applications, 23, 022003 (2011); doi:10.2351/1.3567962.
  7. Tan, W., Bailey, N. and Shin, Y.C., “A Novel Integrated Model Combining Cellular Automata and Phase Field Methods for Microstructure Evolution during Solidification of Multi-Component and Multi-Phase Alloys”, Computational Materials Science. Vol. 50, Issue 9, July 2011, Pages 2573-2585 doi:10.1016/j.commatsci.2011.03.044
  8. Tan, W., Wen, S., Bailey, N. and Shin, Y.C. “Multi-scale Modeling of Transport Phenomena and Dendritic Growth in Diode Laser Cladding Process” Metallurgical and Materials Transactions B, Volume 42, Issue 6 (2011), Page 1306-1318. DOI: 10.1007/s11663-011-9545-y
  9. Ding, H. and Shin, Y.C., “Modeling of Grain Refinement in Aluminum and Copper subject to Cutting”, Computational Materials Science, Vol. 50, Issue 10, August-September 2011, Pages 3016-3025.
  10. Ding, H., Shen, N. and Shin, Y.C., “Experimental and Numerical Modeling Analysis of Micro Milling of Hardened H13 Tool Steel”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 133, Issue 4, August 2011, 041007.
  11. Wen, S. and Shin, Y.C., “Modeling of Transport Phenomena in Direct Laser Deposition of Metal Matrix Composite”, International Journal of Heat and Mass Transfer, Volume 54, Issues 25-26, December 2011, Pages 5319-5326.
  12. Hu, W., Shin, Y.C. and King, G.B., “Early-state Plasma Dynamics with Air Ionization during Ultrashort Laser Ablation of Metal”, Physics of Plasmas, 18, 093302 (2011). doi:10.1063/1.3633067. Also, published in Virtual Journal of Ultrafast Science, October 2011.
  13. Shin, Y.C., Hu, W., King, G., “High Aspect Ratio Microhole Drilling Using Ultrashort Lasers”, Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.
  14. Shin, Y.C., Cheng, G., Hu, W., Zhang, M.T., Lee, S., “High Precision Scribing of Thin Film Solar Cells by a Picosecond Laser”, Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta,GA.
  15. Tan, W., Wen, S., Bailey,N. S. and Shin, Y.C., “Numerical Modeling of Transport and Dendritic Growth in Laser Conduction Welding of 304 Stainless Steel”, ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50219, June 13-17, 2011, Corvallis,Oregon.
  16. Ding, H. and Shin, Y.C., “Dislocation density-based grain refinement modeling of orthogonal cutting of commercially pure titanium”, ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50220, June 13-17, 2011, Corvallis, Oregon.
  17. Ding, H., Shen, N. and Shin, Y.C., “Experimental and numerical modeling analysis of micro-milling of hardened H13 tool steel”, ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50244, June 13-17, 2011, Corvallis, Oregon.
  18. Piya, C., Wilson, J.M., Murugappana, S., Shin, Y.C. and Ramani, K. “Virtual Repair: Geometric Reconstruction For Remanufacturing Gas Turbine Blades”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Design for Manufacturing and the Life Cycle Conference, IDETC/DFMLC 2011, August 29 - 31, 2011, Washington, DC, USA.
  19. Cao, Y. and Shin, Y.C., “Predictive Self-closed Modeling of Laser Shock Peening and Parametric Study”, Proceesings of the 11st International Conference on Shot Peening, September 12-15, 2011, inSouth Bend, Indiana, USA.
  20. Schoeffel, K. and Shin, Y.C., “Laser Direct Deposition of Nickel-Based Metal Matrix Composite” Paper (1707), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Oct. 23-27, 2011, Orlando, FL.
  21. Shin, Y.C. and Dandekar, C., Machining of Metal Matrix Composites, edited by J. Paulo Davim, Chapter 1, Mechanics and Modeling of Chip Formation in Machining of MMC, Springer, 2011, ISBN 978-0-85729-937-6.
  22. Hu, W., Shin, Y.C. and King, G.B., “Effect of Air Breakdown with a Focusing Lens on Ultrashort Laser Ablation”, Applied Physics Letter, 99, 234104 (2011). Also, in January 2012 issue of Virtual Journal of Ultrafast Science. doi:10.1063/1.3665631.
  23. Halani, P. and Shin, Y.C., “In-situ Synthesis and Characterization of Shape Memory Alloy- Nitinol by Laser Direct Deposition”, Metallurgical and Materials Transactions, A. Volume 43, Number 2, Feb. 2012, 650-657. DOI: 10.1007/s11661-011-0890-x
  24. Ding, H., Shen, N. and Shin, Y.C., “Thermal and Mechanical Modeling Analysis of Laser-assisted Micro Milling of Difficult-to-machine Alloys”, Journal of Materials Processing Technology, Volume 212, Issue 3, March 2012, Pages 601–613.
  25. Ding, H. and Shin, Y.C., “Predictive Modeling of Grain Refinement during Multi-step Rolling Processes”, Journal of Materials Processing Technology, Volume 212, Issue 5, May 2012, Pages 1003–1013. doi:10.1016/j.jmatprotec.2011.12.005
  26. Zhao, X. and Shin, Y.C., “A Two-dimensional Comprehensive Hydrodynamic Model for Femtosecond Laser Pulse Interaction with Metals”, Journal of Physics D: Applied Physics, 45 105201, 2012. doi:10.1088/0022-3727/45/10/105201

Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.