-
Mangal Roy, Vamsi Krishna Balla, Amit Bandyopadhyay and Susmita Bose, MgO Doped Tantalum Coating on Ti: Microstructural Study and Biocompatibility Evaluation, ACS Applied Materials & Interfaces, 4 (2012) 577-580 [Impact factor: 2.925].
-
Mitun Das, Vamsi Krishna Balla, Debabrata Basu, Indranil Manna, T. S. Sampath Kumar, and Amit Bandyopadhyay, Laser processing of in-situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings, Scripta Materialia, 66 (2012) 578-581 [Impact factor: 2.949].
-
Solaiman Tarafder, Vamsi Krishna Balla, Neal M. Davies, Amit Bandyopadhyay and Susmita Bose, Microwave Sintered 3D Printed β-Tricalcium Phosphate Scaffolds for Bone Tissue Engineering, Journal of Tissue Engineering and Regenerative Medicine, Accepted (Nov. 2011) [Impact factor: 3.534].
-
Vamsi Krishna Balla, Abhimanyu Bhat, Susmita Bose and Amit Bandyopadhyay, Laser Processed TiN Reinforced Ti6Al4V Alloy Composite Coatings, J of Mechanical Behavior of Biomedical Materials, 6 (2012) 9-20 [Impact factor: 3.297]. Online Access
-
Vamsi Krishna Balla, Luke B. Roberson, Gregory W. O‟Connor, Steven Trigwell, Susmita Bose and Amit Bandyopadhyay, First Demonstration on Direct Laser Fabrication of Lunar Regolith Parts, Rapid Prototyping Journal, Accepted, June, 2011[Impact factor: 0.72].
-
Stanley Dittrick, Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Wear Performance of Laser Processed Tantalum Coatings, Materials Science and Engineering C, 31 (2011) 1832-1835 [Impact factor: 2.178]. Online Access
-
Abhimanyu Bhat, Vamsi Krishna Balla, Sandip Bysakh, Debabrata Basu, Susmita Bose and Amit Bandyopadhyay, Carbon Nanotube Reinforced Cu-10Sn Alloy Composites: Mechanical and Thermal Properties, Materials Science and Engineering A, 528 (2011) 6727-6732 [Impact factor: 2.09]. Online Access
-
Subhadip Bodhak, Vamsi Krishna Balla, Susmita Bose, Amit Bandyopadhyay, Uday Kashalikar, Santosh K Jha and Suri Sastri, In vitro Biological and Tribological Properties of Transparent Magnesium Aluminate (SpinelÒ) and Aluminum Oxynitride (AlONÒ), Journal of Materials Science – Materials in Medicine, 22 (2011) 1511-1519 [Impact factor: 2.325; Times cited: 1]. Online Access
-
Mitun Das, Sandip Bysakh, Debabrata Basu, T.S. Sampathkumar, Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Microstructure, Mechanical and Wear Properties of Laser Processed SiC Particle Reinforced Coatings on Titanium, Surface and Coatings Technology, 205 (2011) 4366-4373. [Impact factor: 2.135]. Online Access
-
Amit Bandyopadhyay, Vamsi Krishna Balla, Mangal Roy and Susmita Bose, Laser Surface Modification of Metallic Biomaterials, JOM, 63 (6) (2011) 94-99 [Impact factor: 1.175]. Online Access
-
Vamsi Krishna Balla, Shantel Martinez, Ben Tunberg Rogoza, Chase Livingston, Deepak Venkateswaran, Susmita Bose and Amit Bandyopadhyay, Quasi-static Torsional Deformation Behavior of Porous Ti–6Al–4V alloy, Materials Science and Engineering C, 31 (2011) 945-949 [Impact factor: 2.178]. Online Access
-
Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Hard and Wear Resistant Surfaces for Load Bearing Metal Implants, Ceramic Transactions, Volume 228 (2011) 109-124, “Biomaterials Science – Processing, Properties and Applications”, Eds. Amit Bandyopadhyay, Susmita Bose and Roger Narayan, American Ceramic Society.
-
Sheldon Bernard, Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Rotating Bending Fatigue Response of Laser Processed Porous NiTi Alloy, Materials Science and Engineering C, 31 (2011) 815-820 [Impact factor: 2.178]. Online Access
-
Félix A. España, Vamsi Krishna Balla and Amit Bandyopadhyay, Laser Processing of Bulk Al-12Si Alloy: Influence of Microstructure on Thermal Properties, Philosophical Magazine, 91 (2011) 574-588 [Impact factor: 1.302; Times cited: 1]. Online Access
-
Stanley Dittrick, Vamsi Krishna Balla, Neal M Davies, Susmita Bose and Amit Bandyopadhyay, In vitro Wear Rate and Co Ion Release of Compositionally and Structurally Graded CoCrMo-Ti6Al4V Structures, Materials Science and Engineering C, 31 (2011) 809-814 [Impact factor: 2.178; Times cited: 4]. Online Access
-
Maal Roy, Vamsi K Balla, Amit Bandyopadhyay and Susmita Bose, Compositionally Graded Hydroxyapatite / Tricalcium Phosphate Coating on Ti by Laser and Induction Plasma, Acta Biomaterialia, 7 (2011) 866-873 [Impact factor: 4.822; Times cited: 4]. Online Access
-
Vamsi Krishna Balla and Amit Bandyopadhyay, Laser Processing of Fe Based Bulk Amorphous Alloy, Surface and Coatings Technology, 205 (2010) 2661-2667 [Impact factor: 2.135]. Online Access
-
Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Microstructure and Wear Properties of Laser Deposited WC-12%Co Composites, Materials Science and Engineering A, 527 (2010) 6677-6682 [Impact factor: 2.09; Times cited: 1]. Online Access
-
Mangal Roy, Vamsi Krishna Balla, Amit Bandyopadhyay, and Susmita Bose, Comparison of Tantalum and Hydroxyapatite Coatings on Titanium for Applications in Load Bearing Implants, Advanced Engineering Materials (Advanced Biomaterials), 12 (2010) B637-B641 [Impact factor: 1.761; Times Cited: 3]. Online Access
-
Sheldon A Bernard, Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Direct Laser Processing of Bulk Lead Zirconate Titanate Ceramics, Materials Science and Engineering B, 172 (2010) 85-88 [Impact factor: 1.715]. Online Access
-
Mitun Das, Vamsi Krishna Balla, Debabrata Basu, Susmita Bose and Amit Bandyopadhyay, Laser Processing of SiC Particle Reinforced Coating on Titanium, Scripta Materialia, 63 (2010) 438-441 [Impact factor: 2.949; Times Cited: 7]. Online Access
-
Vamsi Krishna Balla, Susmita Bose, Neal M. Davies and Amit Bandyopadhyay, Tantalum – A Bioactive Metal for Implants, JOM, 62 (7) (2010) 61-64 [Impact factor: 1.175; Times cited: 5]. Online Access
-
Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Understanding Compressive Deformation in Porous Titanium, Philosophical Magazine, 90 (22) (2010) 3081-3094. [Impact factor: 1.302; Times Cited: 5]. Online Access
-
Félix A. España, Vamsi Krishna Balla and Amit Bandyopadhyay, Laser surface modification of AISI 410 stainless steel with brass for enhanced thermal properties, Surface and Coatings Technology, 204 (2010) 2510-2517. [Impact factor: 2.135; Times Cited: 4]. Online Access.
-
Vamsi Krishna Balla, Subhadip Bodhak, Susmita Bose and Amit Bandyopadhyay, Porous Tantalum Structures for Bone Implants: Fabrication, Mechanical and In vitro Biological Properties, Acta Biomaterialia, 6 (2010) 3349-3359 [Impact factor: 4.822; Times Cited: 16]. Online Access
-
Vamsi Krishna Balla, Shashwat Banerjee, Susmita Bose and Amit Bandyopadhyay, Direct Laser Processing of Tantalum Coating on Ti for Bone Replacement Structures, Acta Biomaterialia, 6 (2010) 2329-2334 [Impact factor: 4.822; Times Cited: 11]. Online Access
-
Félix A. España, Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Design and Fabrication of CoCrMo Based Novel Structures for Load Bearing Implants using Laser Engineered Net Shaping, Materials Science and Engineering C, 30 (2010) 50-57. [Impact factor: 2.178; Times Cited: 7]. Online Access
-
Amit Bandyopadhyay, Félix A. España, Vamsi Krishna Balla, Susmita Bose, Yusuke Ohgami and Neal M Davies, Influence of Porosity on Mechanical Properties and In vivo Response of Ti6Al4V Implants, Acta Biomaterialia, 6 (2010) 1640-1648 [Impact factor: 4.822; Times Cited: 12]. Online Access
-
Vamsi Krishna Balla, Weichang Xue, Susmita Bose and Amit Bandyopadhyay, Laser Assisted Zr/ZrO2 Coating on Ti for Load-bearing Implants, Acta Biomaterialia, 5 (2009) 2800-2809. [Impact factor: 4.822; Times Cited: 19]. Online Access
-
Vamsi Krishna Balla, Paul DeVasConCellos, Weichang Xue, Susmita Bose and Amit Bandyopadhyay, Fabrication of Compositionally and Structurally Graded Ti-TiO2 Structures using Laser Engineered Net Shaping (LENS), Acta Biomaterialia, 5 (2009) 1831-1837 [Impact factor: 4.822; Times Cited: 19]. Online Access
-
Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Laser Surface Modification of Al-4Cu-1Mg Alloy for Enhanced Thermal Conductivity, Optics and Lasers in Engineering, 47 (2009) 651-655. [Impact factor: 1.567; Times Cited: 8]. Online Access
-
B. Vamsi Krishna and Amit Bandyopadhyay, Surface Modification of AISI 410 Stainless Steel Using Laser Engineered Net Shaping (LENSÔ), Materials and Design, 30 (2009) 1490-1496. [Impact factor: 1.694; Times Cited: 18]. Online Access.
-
B. Vamsi Krishna, Susmita Bose and Amit Bandyopadhyay, Fabrication of Porous NiTi Shape Memory Alloy Structures using Laser Engineered Net Shaping, Journal of Biomedical Materials Research Part B – Applied Biomaterials, 89B (2009) 481-490. [Impact factor: 2.22; Times Cited: 17]. Online Access
-
Amit Bandyopadhyay, B. Vamsi Krishna, Weichang Xue and Susmita Bose, Application of Laser Engineered Net Shaping (LENS) to Manufacture Porous and Functionally Graded Structures for Load Bearing Implants, Journal of Materials Science - Materials in Medicine, 20 (2009) S29-S34. [Impact factor: 2.325; Times Cited: 14]. Online Access
-
Kakoli Das, Vamsi Krishna Balla and Amit Bandyopadhyay, Surface Modification of Laser Processed Porous Titanium for Load Bearing Implants, Scripta Materialia, 59 (2008) 822-825. [Impact factor: 2.949; Times Cited: 7]. Online Access
-
Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping, International Journal of Applied Ceramic Technology, 5 (2008) 234-242. [Impact factor: 1.627; Times Cited: 6]. Online Access
-
B. Vamsi Krishna, Weichang Xue, Susmita Bose and Amit Bandyopadhyay, Engineered Porous Metals for Implants, JOM, 60 (5) (2008) 45-48. [Impact factor: 1.175; Times Cited: 20]. Online Access
-
B. Vamsi Krishna, Weichang Xue, Susmita Bose and Amit Bandyopadhyay, Functionally Graded Co-Cr-Mo Coating on Ti-6Al-4V Alloy Structures, Acta Biomaterialia, 4 (2008) 697-706. [Impact factor: 4.822; Times Cited: 22]. Online Access
-
Mangal Roy, B. Vamsi Krishna, Amit Bandyopadhyay and Susmita Bose, Laser Processing of Bioactive tricalcium phosphate coating on titanium for load bearing implant, Acta Biomaterialia, 4 (2008) 324-333. [Impact factor: 4.822; Times Cited: 41]. Online Access
-
B. Vamsi Krishna, Susmita Bose and Amit Bandyopadhyay, Low Stiffness Porous Ti Structures for Load Bearing Implants, Acta Biomaterialia, 3 (2007) 997-1006. [Impact factor: 4.822; Times Cited: 55]. Online Access
-
B. Vamsi Krishna, Susmita Bose and Amit Bandyopadhyay, Laser Processing of Net-Shape NiTi Shape Memory Alloy, Metallurgical and Materials Transactions A, 38A (2007) 1096-1103. [Impact factor: 1.712; Times Cited: 16]. Online Access
-
Vamsi Krishna Balla, Partha P Bandyopadhyay, Susmita Bose and Amit Bandyopadhyay, Compositionally Graded Yttria Stabilized Zirconia Coating on Stainless Steel Using Laser
-
Engineered Net Shaping (LENSÔ), Scripta Materialia, 57 (2007) 861-864. [Impact factor: 2.949; Times Cited: 21]. Online Access
-
Weichang Xue, B. Vamsi Krishna, Amit Bandyopadhyay and Susmita Bose, Processing and biocompatibility evaluation of laser processed porous titanium, Acta Biomaterialia, 3 (2007) 1007-1018. [Impact factor: 4.822; Times Cited: 60]. Online Access
-
Partha P Bandyopadhyay, Vamsi Krishna Balla, Susmita Bose and Amit Bandyopadhyay, Compositionally Graded Aluminum Oxide Coatings on Stainless Steel Using Laser Processing, Journal of American Ceramic Society, 90 (2007) 1989-1991. [Impact factor: 2.167; Times Cited: 4]. Online Access
-
B. Vamsi Krishna, Susmita Bose and Amit Bandyopadhyay, Strength of Open Cell 6101 Aluminum Foams Under Free and Constrained Compression, Materials Science and Engineering A, 452-453 (2007) 178-188. [Impact factor: 2.09; Times Cited: 15]. Online Access
-
B. Vamsi Krishna and G. D. Janaki Ram, Tailoring Precipitation in Al Alloys Through Local Plastic Deformation, Materials and Design, 28 (2007) 2239-2243 [Impact factor: 1.694; Times Cited: 1]. Online Access