Prof. Walid M. Daoush

Helwan University, Egypt

Professor of Nanomaterials



D. Phil, University of Ain Shams

Publications (selected)

  1. Walid M.Daoush, Ayman Elsayed, Omayma El Kady, Mohamed Sayed, Osama M. Dawood “Enhancement of Physical and Mechanical Properties of Oxide Dispersion Strengthened Tungsten Heavy Alloys”, Metallurgical and Materials Transactions A, Vol. 47, Issue 5, 2387-2395 (2016).
  2. Walid M.Daoush, J. Yao, M. Shamma, K. Morsi “Ultra-rapid Processing of High-hardness Tungsten-Copper Nanocomposites”, Scripta Materialia, Vol. 113, 246-249 (2016).
  3. K. Morsi, Walid M. Daoush “Al-TiH2 Composite ‘Particles’ as foaming Precursors for Metallic Foams”, Scripta Materialia, Vol. 105, 6-9 (2015).
  4. H. M. Yehia, Walid. M. Daoush, A. E. El-Nikhaily “Microstructure and Physical Properties of Blended and Coated (Ta, Nb)C/Ni Cermets”, Powder Metallurgy Progress Vol. 15, No.2, 262-271 (2015).
  5. Walid M. Daoush, Omayma A. El Kady, Amal. A. Abd Elgany, Mohamed A. Ghanem, Ahmed E. El-Nikhaily “Microstructure, Hardness and Magnetic Properties of (W:Ti)C-Ni Cemented Carbides” Journal of Japan Ceramic Society, in Press (2015).
  6. Ayman Elsayed, Wei Li, Omayma A. El Kady, Walid M. Daoush, Eugene A. Olevsky, Randall M. German “Experimental Investigations on the Synthesis of W-Cu Nanocomposite through Spark Plasma Sintering”, Journal of Alloys and Compounds, Vol. 639, 373-380 (2015).
  7. Walid M. Daoush, Hee S. Park, Fawad Inam, Byung K. Lim, and Soon H. Hong “Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering”, Metallurgical And Materials Transactions A, Vol. 46A, No. 3, 1385-1393 (2015).
  8. Walid M. Daoush, Toyoko Imae “Fabrication of PtNi Bimetallic Nanoparticles Supported on Multi-Walled Carbon Nanotubes", Journal of Experimental Nanoscience, Vol. 10, No. 5, 392–406 (2015).
  9. Walid M. Daoush, A. Francis, Y. Lin, R. German “An exploratory investigation on the in-situ synthesis of SiC/AlN/Al composites by spark plasma sintering”, Journal of Alloys and Compounds,Vol. 622, 458-462 (2015).
  10. Walid M. Daoush, Omayma Elkady “Microstructure, Physical Properties and Hardness of Al2O3 Short Fibres/Ni Matrix Composites Fabricated by Powder Technology”, Journal of Composite Materials, Vol. 48, No. 30, 3735-3746 (2014).
  11. Walid M. Daoush, Hee S. Park, Soon H. Hong “Fabrication of TiN/cBN and TiC/Diamond coated particles by titanium deposition process”, Trans. Nonferrous Met. Soc. China, Vol. 24, 3562−3570 (2014).
  12. Walid M. Daoush, Byung K. Lim, Dong H. Nam and Soon H. Hong “Microstructure and mechanical properties of CNT/Ag nanocomposites fabricated by spark plasma sintering” Journal of Experimental Nanoscience, Vol. 9, No. 6, 588-596 (2014).
  13. Fawad Inam, Badekai R Bhat, Thuc Vo, Walid M. Daoush “Structural health monitoring capabilities in ceramic - carbon nanocomposites” Ceramic International, Vol. 40, No. 2, 3793-3798 (2014).
  14. Walid M. Daoush, Soon H. Hong “Synthesis of multi-walled carbon nanotube/silver nanocomposite powders by chemical reduction in aqueous solution”, Journal of Experimental Nanoscience, Vol. 8, No. 5, 578–587 (2013).
  15. Zeinab Abdel Hamid, Sayed F. Moustafa, Walid M. Daoush, Fatema Abdel Mouez, Mona Hassan “Fabrication and Characterization of Tungsten Heavy Alloys Using Chemical Reduction and Mechanical Alloying Methods”, Open Journal of Applied Sciences, 3, 15-27 (2013).
  16. A.A. El-Daly, M. Abdelhameed, M. Hashish, Walid M. Daoush “Fabrication of silicon carbide reinforced aluminum matrix nanocomposites and characterization of its mechanical properties using non-destructive technique”, Materials Science and Engineering: A 559, 384-393 (2013).
  17. Walid M. Daoush, Toyoko Imae “Syntheses and Characterizations of Multi-walled Carbon Nanotubes-Supported Palladium Nanocomposites”, Journal of Materials Research, 27 (13) 1680-1687 (2012).
  18. Sayed F. Moustafa, Walid M. Daoush, Ahmed Ibrahim, Erich Neubauer “Hot Forging and Hot Pressing of AlSi Powder Compared to Conventional Powder Metallurgy Route”, Journal of Materials Sciences and Application, Vol. 2, 1127-1133 ( 2011).
  19. Walid M. Daoush “Synthesis and Characterizations of Nanosized Fe3O4 for Biomedical Applications”, World Journal of Engineering Vol. 2, 161-162 (2010).
  20. Wei Li, Walid M. Daoush, Aditya Bothate, Z. Abdel-Hamid, Ridvan Yamanoglu, Eugene Olevsky, Sayed Moustafa, Randall M. German “Influence of Powder Preparation on Consolidation Behavior and Properties of Tungsten-Copper Alloys”, Advances in Powder Metallurgy & Particulate Materials, Vol. 1, 245-257 (2010).
  21. H.A. Sallam, W.M. El-Meligy, E.A. Mohamed, Walid. M. Daoush, A.G. Moustafa “Utilization of the Hyperfine Structure of the Doped Iron Nuclei to Elucidate the Structural, Electric and Magnetic Properties of La1-xCaxMn0.95Fe0.05O3 Perovskite System”, Arab Journal of Nuclear Science and Applications, Vol. 43, No 1, 138-150 (2010).
  22. Walid M. Daoush, B.K. Lim, C.B. Mo, D.H. Nam, S. H. Hong “Electrical and Mechanical Properties of Carbon Nanotube Reinforced Copper Nanocomposites Fabricated by Electroless Deposition Process” Materials Science & Engineering A, Vol. 513-514, 247-253 (2009).
  23. Walid M. Daoush, Hee S. Park, Kyong H. Lee, Sayed F. Moustafa, Soon H. Hong “Effect of Binder Compositions on Microstructure, Hardness and Magnetic Properties of (Ta, Nb)C-Co and (Ta,Nb)C-Ni Cemented Carbides” Inter. J. of Ref. Met. and Hard Mat., Vol. 27, 669-675 (2009).
  24. Walid M. Daoush, Kyong H. Lee, Hee S. Park, Soon H. Hong “Effect of Liquid Phase Composition on the Microstructure and Properties of (W, Ti) C Cemented Carbide Cutting Tools” Inter. J. of Ref. Met. and Hard Mat., Vol. 27, No. 1, 83-89 (2009).
  25. Walid M. Daoush, Sayed F. Moustafa “Coated powders 'a good base' for intermetallics” Metal Powder Report, Vol 63, No 11, pp. 16 (2008).
  26. A.G. Mostafa, E.K. Abdel-Khalek, Walid M. Daoush, M.Y.Hassaan “Structural, Magnetic and Electrical Transport Properties of the La0.70Sr0.30Mn0.9657Fe0.04O3+δ Perovskite” Journal of Hyperfine Interaction, vol. 184, pp. 167 (2008).
  27. Walid M. Daoush “Processing and Characterization of CNT/Cu Nanocomposites by Powder Technology” Journal of Powder Metallurgy and Metal Ceramics, Vol. 47, No. 9-10, pp. 531 (2008).
  28. A.G. Mostafa, E.K. Abdel-Khalek, Walid M. Daoush, S.F. Moustfa “Study of Some co-Precipitated Manganite Peroveskite Samples Doped Iron” Journal of Magnetism and Magnetic Materials, Vol. 320, No.24, pp. 3356 (2008).
  29. S. H. Kaytbay and Walid M. Daoush “Phase Identification and Magnetic Properties of Nanocrystalline Fe50Cu50” Journal of Powder Metallurgy Progress, Vol. 7, No. 2, pp. 111 (2007).
  30. Walid M. Daoush and O.A. Elkady “Beating the force field with PM shield materials” Metal Powder Report, Vol. 62, No. 8, pp. 22(2007).
  31. Walid M. Daoush “Synthesis and Consolidation of Nano-Sized NiCo Powder by Powder Technology Rout” Mater. Sci. Forum, Vols. 561-565, pp. 1425 (2007).
  32. Walid M. Daoush, Kyong H. Lee, Hee S. Park, Soon H. Hong “Effect of Metallic Binder Composition on Microstructure and Hardness of (W, Ti)C Cemented Carbides” J. of Korean Powder Metallurgy Institute, Vol. 14, pp. 208 (2007) (in Korean).
  33. Walid M. Daoush “Processing of FeCo Nanosized Soft-Magnetic Material by Powder metallurgy Technique” Mater. Sci. Forum, Vols. 558-559, pp. 707 (2007).
  34. Walid M. Daoush, and Sayed F. Moustafa “Coating points a way for synthesis of tough intermetallics” Metal Powder Report, Vol. 62, No. 1, pp. 30 (2007).
  35. S.H. Kaytbay S.F. Moustafa and Walid M. Daoush “Solid-State Reaction in Al-Fe Binary System Induced by Mechanical Alloying” Journal of Defect and Diffusion, vol. 272, pp. 15 (2007).
  36. Sayed F. Moustafa, Walid M. Daoush “Synthesis of Nanosized Fe-Ni Powder by Chemical Process for Magnetic Applications” Journal of Materials Processing Technology Vol. 181, pp. 59 (2007).
  37. S.H. Mansour, N.M. Ahemed and Walid M.Daoush “Studies on Magnetic Pigmented Polyester Composites” Polymer-Plastics Technology and Engineering, Vol. 46, pp. 85 (2007).
  38. A. Francis, Walid M. Daoush “Synthesis and Magnetic Characteristics of Crystallized Ceramic in the BaO–NiO-TiO2–Fe2O3 System” Journal of Materials Processing Technology Vol. 181, pp. 213 (2007).
  39. Walid M. Daoush and Sayed F. Moustafa “Processing of Metallic Filters by Powder Metallurgy Technique” Journal of Powder Metallurgy Progress, Vol. 6, No.4, pp. 164 (2006).
  40. S.H. El-Sabbagh, N.M. Ahmed, Walid M. Daoush “Colored Rubber Vulcanizates with Some Magnetic Properties” Journal of Applied Polymer Science, Vol. 102, pp. 494 (2006).
  41. Sayed F. Moustafa, Walid.M. Rashad Daoush, E.E. El- Shereafy “Cu/Matrix Composites Produced with either Coated or Uncoated Reinforcement Powders” Canadian Metallurgical Quaterly, Vol. 40, No. 4, pp. 533 (2001).

Profile Details

Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.