-
Y. X. Li, D. Qiu, Y. H. Rong, M. X. Zhang, Effect of long period stacking ordered phase on thermal stability of refined grains in Mg-RE based alloys, Phil. Mag., Accepted on 19/12/2013.
-
D. Qiu, M.-X. Zhang, P. M. Kelly, T. Furuhara, Non-classical {334}β Type of Twinned α' Martensite in a Ti-5.26wt%Cr Alloy, Acta Mater. Accepted on 7/12/2013.
-
S. Guo, Z. L. Ning, M. X. Zhang, F. Y. Cao, J. F. Sun, Effects of Gas to Melt Ratio on the Microstructure of an Al-10.83Zn-3.39Mg-1.22Cu Alloy Produced by Spray atomization and Deposition, Materials Characterizations, Accepted on 1/11/2013.
-
H.-W. Chang, M.-X. Zhang, A. Atrens and H. Huang, Nanomechanical properties of Mg-Al intermetallic compounds produced by Packed Powder Diffusion Coating (PPDC), J Alloys Compd, 2014, 587, 527-532.
-
Q. Wang, D. Qiu, Y. Xiong, N. Birbilis, M.-X. Zhang , High resolution microstructure characterization of the interface between cold sprayed Al coating and Mg alloy substrate, Applied Surface Science, 2014, 289, 366-369.
-
Q. Wang, N. Birbilis, M.-X. Zhang, Process optimisation of cold spray Al coating on AZ91 alloy, Surface Engineering, 2013, Accepted on 26/10/2013.
-
D. Qiu, M.-X. Zhang, The crystallography of nucleation and wettability of Mg grains on active Al2Y inoculants in an Mg-Y-Al alloy, Journal of Alloys ad Compounds. 2014, 586, 39-44.
-
Y. Zeng, B. Jiang, M.-X. Zhang, H. Yin, R. Li, F. Pan, Effect of Mg24Y5 intermetallic particles on grain refinement of Mg-9Li alloy, Intermetallics, 2014, 45, 18-23.
-
D. Qiu, M.-X. Zhang, P. M. Kelly, T. Furuhara, Crystallography of Surface Precipitates Associated with Shape Change in a Ti-5.26wt%Cr alloy, Acta Mater. 2013, 61, 7624-7638.
-
D. Qiu, M.-X. Zhang, P. M. Kelly, T. Furuhara, Discovery of Plate-Shaped Athermal ω phase in a Ti-5.26wt%Cr Alloy, Scripta Mater. 2013,69, 752-755.
-
H.-W. Chang, D. Qiu, J. A. Taylor, M. A. Easton, M.-X. Zhang, The role of Al2Y in grain refinement in Mg-Al-Y alloy system, Journal of Magnesium and Alloys, 2013, 1, 115-121.
-
B. Jiang, Y. Zeng, M.-X. Zhang, J. C. Liao, F.-S. Pan, The effect of addition of Cerium on the grain refinement of Mg-3Al-1Zn cast alloy, Journal of Materials Research, 2013, 23, 904-908.
-
H.-M. Yin, B. Jiang, X.-Y. Huang, Y. Zeng, Q.-S. Yang, M.-X. Zhang, F.-S. Pan, Effect of Ce addition on microstructure of Mg-9Li alloy, Transactions of Nonferrous Metals Society of China (English Edition), 2013, 23, 1936-1941.
-
Z.-L. Liu, F. Wang, D. Qiu, J. A. Taylor, M.-X. Zhang, The effect of solute elements on the grain refinement of cast Zn, Metall. Mater. Trans A, 2013, 44, 4025-4030.
-
F. Wang, Z.-L. Liu, D. Qiu, J. A. Taylor, M. A. Easton, M.-X. Zhang, The Grain Refinement Mechanism of Cast Aluminium by Zirconium, Acta Mater., 2013, 61, 5636-5645.
-
Q. Wang, N. Birbilis, H. Huang, M.-X. Zhang, Microstructure characterization and nanomechanics of cold sprayed pure Al and Al-Al2O3 composite coatings, Surface & Coatings Technology, 2013, 232, 216-223.
-
Y. X. Li, D. Qiu, Y. H. Rong, M.-X. Zhang, TEM study of the hardening mechanism in a Mg-Y-Gd-Zn alloy, Intermetallics, 2013, 40, 45-49.
-
B. Jiang, Y. Zeng, M.-X. Zhang, H.-M. Yin, Q.-S. Yang, F.-S. Pan, Effects of Sn on microstructure of as-cast and as-extruded Mg-9Li alloys, Transactions of Nonferrous Metals Society of China (English Edition), 2013, 23, 904-908.
-
J. Dai, S. Zhu, M. A. Easton, M.-X. Zhang, D. Qiu, G. Wu, W. Liu, W. Ding, Heat treatment, microstructure and mechanical properties of a Mg–Gd–Y alloy grain-refined by Al additions, Mater. Sci. Eng. A, 2013, 576, 298-305.
-
F. Wang, Z.-L. Liu, D. Qiu, J. A. Taylor, M. A. Easton, M.-X. Zhang, Revisiting the role of peritectics in grain refinement of Al alloys, Acta Mater., 2013, 61, 360-370.
-
D. Fabijanic, A. Taylor, K.D. Ralston, M-X. Zhang, N. Birbilis, The influence of SMAT attrition media on the surface contamination and corrosion of magnesium, Corrosion, 2013, 69, 527-535.
-
D. Qiu, M.-X. Zhang, L Grøndahl, A novel composite porous coating approach for bioactive titanium-based orthopaedic, Journal of Biomedical Materials Research: Part A, 2013, 101A, 862-872.