-
Allahkarami M., Hanan J. C., (2011), X-ray diffraction mapping on a curved surface, Journal of Applied Crystallography, 44(6), 1211-1216.
-
Allahkaram, M., Hanan J.C., (2011), Mapping the tetragonal to monoclinic phase transformation in zirconia core dental crowns, Dental Materials, 27(12), 1279-1284.
-
Allahkarami M., Hanan J.C., (2012), Residual stress delaying phase transformation in Y-TZP bio-restorations, Phase Transitions, 85(1–2), 169–178.
-
Allahkarami M., Hanan J.C., Bale H.A., (2010), Regeneration of surface roughness by the Langevin equation using stochastic analysis on AFM image of a carbon fiber, Applied Surface Science, 257(3), 857-860.
-
Allahkarami M., Faraji L.S., Kavei G., Zare Y., (2010), Composition and thermoelectric power factor variation of (Bi2Te3) 0.96 (Bi2Se3) 0.04 crystal in growth direction, Materials Chemistry and Physics, 119(1-2), 145-148.
-
Allahkarami M., Bale H.A., Hanan J.C., (2010), Analytical Model for Prediction of Residual Stress in Zirconia-Porcelain Bi-Layer, Advances in Bioceramics and Porous Ceramics III, 19-26.
-
Allahkarami M., Bale H.A, Hanan J.C., (2011), Characterization of non uniform veneer layer thickness distribution on curved substrate zirconia ceramics using X-Ray micro-tomography, Developments in Strategic Materials and Computational Design II, 153-163.
-
Allahkarami M., Hanan J.C., (2013), Finite Element Model Generation Based on Stochastic Analysis on AFM Images, Imaging Methods for Novel Materials and Challenging Applications, 3, 417-421.
-
Jayakumar B., Allahkarami M., Hanan J.C., (2013), Inter-cellular Joining for Amorphous Honeycombs, Composite Materials and Joining Technologies for Composites, 7, 25-33.
-
Zhang Y., Allahkarami M., Hanan J.C, (2011), Measuring residual stress in ceramic zirconia-porcelain dental crowns by nanoindentation, Journal of the Mechanical Behavior of Biomedical Materials, 6, 120-127.
-
Zakeri M., Allahkarami M., Kavei G., Khanmohammadian A., Rahimipour M., (2009), Synthesis of nanocrystalline Bi2Te3 via mechanical alloying, Journal of materials processing technology, 209(1), 96-101.
-
Faraji L.S, Singh R.P., Allahkarami M., (2009), Pulsed laser deposition of bismuth telluride thin film and annealing effects, The European Physical Journal Applied Physics, 46(02).
-
Zakeri M., Allahkarami M., Kavei G., Khanmohammadian A., Rahimipour M., (2008), Low temperature synthesis of nanocrystalline Sb2Te3 by mechanical alloying, Journal of Materials Science, 43(5), 1638-1643.
-
Kavei G., Karami M.A., (2008), Thermoelectric crystals Bi2Te2.88Se0.12 undoped and doped by CdCl2 or CdBr2 impurities, fabricated and characterized by XRD and Hall effect, Materials Research Bulletin, 43(2), 239-243.
-
Kavei G., Karami M.A., (2008), Formation of anti-site defects and bismuth overstoichiometry in p-type Sb2−xBixTe3 thermoelectric crystals, The European Physical Journal Applied Physics, 42(02), 67-73.
-
Kavei G., Ali-Nejad B., Kahramanov K.S., Kazemzadeh A., Karami M.A., (2008), Effect of sintering temperature on the properties of powdered (Bi0.25Sb0.75)2Te3 thermoelectric compound sintered at several temperatures, Journal of Thermoelectricity, 3, 31-45.
-
Kavei G., Karami M., (2006), Fabrication and characterization of the p-type (Bi2Te3) x (Sb2Te3) 1-x thermoelectric crystals prepared via zone melting, Bull. Mater. Sci, 29(7), 659-663.
-
M. Allahkarami, S. Bandla, R. P. Winarski, J. C. Hanan, “X-ray nanotomography of a nanofiber: Quantitative measurement of diameter fluctuations”, Applied surface Science, (2014) Article in press.