Biography

Prof. André R. Studart

Department of Materials

ETH Zurich, Switzerland

Assistant Professor


Email: andre.studart@mat.ethz.ch


Qualification

2002 Ph.D., Federal University of São Carlos, Materials Science and Engineering

1997 B.Sc., Federal University of São Carlos, Materials Science and Engineering


Publications (selected)


  1. M.R. Sommer, R.M. Erb, A.R. Studart, Injectable materials with magnetically-controlled anisotropic porosity,ACS Applied Materials & Interfaces, accepted(2012).
  2. R.M. Erb, J. Segmehl, M. Schaffner, A.R. Studart, Temporal response of magnetically-labeled platelets under dynamic magnetic fields,Soft Matter,accepted (2012).
  3. J.S. Sander, L. Isa, P. Rühs, A.R. Studart, Stabilization Mechanism of Double Emulsions made by Microfluidics,Soft Matter, DOI:10.1039/C2SM26700D (2012).
  4. A.R. Studart, Towards high-performance bioinspired composites,Advanced Materials, DOI: 10.1002/adma.201201471(2012).
  5. R.M. Erb, R. Libanori, N. Rothfuchs, A.R. Studart, Composites Reinforced in Three Dimensions by Using Low Magnetic Fields,Science, 335 (6065) 199-204 (2012).
  6. J.S. Sander, R.M. Erb, C. Denier, A.R. Studart, Magnetic Transport, Mixing and Release of Cargo with Tailored Nanoliter Droplets,Advanced Materials, 24 (19) 2582-2587 (2012).
  7. R.M. Erb, K.H. Cherenack, R.E. Stahel, R. Libanori, T. Kinkeldei, N. Munzenrieder, G. Troster, A.R. Studart, Locally Reinforced Polymer-Based Composites for Elastic Electronics,ACS Applied Materials & Interfaces, 4 (6) 2860-2864 (2012).
  8. P.W. Chen, R.M. Erb, A.R. Studart, Designer Polymer-Based Microcapsules Made Using Microfluidics,Langmuir, 28 (1) 144-152 (2012).
  9. R. Libanori, F.H.L. Munch, D.M. Montenegro, A.R. Studart, Hierarchical reinforcement of polyurethane-based composites with inorganic micro- and nanoplatelets,Composites Science and Technology, 72 (3) 435-445 (2012).
  10. R.M. Erb, J. Segmehl, M. Charilaou, J.F. Löffler, A.R. Studart, Non-linear Alignment Dynamics in Suspensions of Platelets under Rotating Magnetic Fields,Soft Matter, DOI:10.1039/C2SM25650A(2012).
  11. A.R. Studart, A. Nelson, B. Iwanovsky, M. Kotyrba, A.A. Kundig, F.H. Dalla Torre, U.T. Gonzenbach, L.J. Gauckler, J.F. Loffler, Metallic foams from nanoparticle-stabilized wet foams and emulsions,Journal of Materials Chemistry, 22 (3) 820-823 (2012).
  12. E. Tervoort, A.R. Studart, C. Denier, L.J. Gauckler, Pickering emulsions stabilized by in situ grown biologically active alkyl gallate microneedles,RSC Advances, DOI: 10.1039/C2RA21253F(2012).
  13. A. R. Studart; Studer, J.; Xu, L.; Yoon, K.; Shum, H. C.; Weitz, D. A., Hierarchical Porous Materials Made by Drying Complex Suspensions.Langmuir,27(3), 955-964 (2011).
  14. A. R. Studart; Libanori, R.; Moreno, A.; Gonzenbach, U. T.; Tervoort, E.; Gauckler, L. J., Unifying model for the electrokinetic and phase behavior of aqueous suspensions containing short and long amphiphiles.Langmuir,DOI: dx.doi.org/10.1021/la202384b(2011)
  15. A. R. Studart; Amstad, E.; Gauckler, L. J., Yielding of weakly attractive nanoparticle networks.Soft Matter,7(14), 6408-6412 (2011).
  16. J. S. Sander; Studart, A. R., Monodisperse Functional Colloidosomes with Tailored Nanoparticle Shells.Langmuir,27(7), 3301-3307 (2011).
  17. F. K. Juillerat; Gonzenbach, U. T.; Elser, P.; Studart, A. R.; Gauckler, L. J., Microstructural Control of Self-Setting Particle-Stabilized Ceramic Foams.Journal of the American Ceramic Society,94(1), 184-190 (2011).
  18. R. M. Erb; Obrist, D.; Chen, P. W.; Studer, J.; Studart, A. R., Predicting sizes of droplets made by microfluidic flow-induced dripping.Soft Matter,DOI:10.1039/C1SM06231J(2011).
  19. L. Xu, A. Bergès, P.J. Lu, A.R. Studart, A.B. Schofield, H. Oki, S. Davies, D.A. Weitz, Drying of complex suspensions,Physical Review Letters, 104 (12) 128303 (2010).
  20. H. C. Shum; A.R. Abate, D. Lee, A.R. Studart, B.G. Wang, C.H. Chen, J. Thiele, R.K. Shah, A. Krummel, D.A. Weitz, Droplet Microfluidics for Fabrication of Non-Spherical Particles,Macromolecular Rapid Communications, 31 (2) 108-118 (2010).
  21. G.D. Quinn, A.R. Studart, C. Hebert, J.R. VerHoef, D. Arola, "Fatigue of zirconia and dental bridge geometry: Design implications",Dental Materials,26 (12), 1133-1136(2010).
  22. S.M.S. Marocho, A.R. Studart, M.A. Bottino, A. Della Bona, Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics,Dental Materials, 26 (5) 483-490 (2010).
  23. J.C.H. Wong, E. Tervoort, S. Busato, U.T. Gonzenbach, A.R. Studart, P. Ermanni, L.J. Gauckler, Designing macroporous polymers from particle-stabilized foams,Journal of Materials Chemistry, 20 (27) 5628-5640 (2010).
  24. F.K. Juillerat, U.T. Gonzenbach, A.R. Studart, L.J. Gauckler, Self-setting particle-stabilized foams with hierarchical pore structures,Materials Letters, 64 (13) 1468-1470 (2010).
  25. I. Akartuna, E. Tervoort, A.R. Studart, L.J. Gauckler, General Route for the Assembly of Functional Inorganic Capsules,Langmuir, 25 (21) 12419-12424 (2009).
  26. I. Akartuna, E. Tervoort, J.C.H. Wong, A.R. Studart, L.J. Gauckler, Macroporous polymers from particle-stabilized emulsions,Polymer, 50 (15) 3645-3651 (2009).
  27. J.C.H. Wong, E. Tervoort, S. Busato, U.T. Gonzenbach, A.R. Studart, P. Ermanni, L.J. Gauckler, Macroporous polymers from particle-stabilized foams,Journal of Materials Chemistry, 19 (29) 5129-5133 (2009).
  28. L. Bonderer, A.R. Studart, J. Woltersdorf, E. Pippel, L.J. Gauckler, Strong and ductile platelet reinforced polymer films inspired by nature: microstructure and mechanical properties,Journal of Materials Research, 24 (9) 2741-2754 (2009).
  29. A.R. Studart, H.C. Shum, D.A. Weitz, Arrested coalescence of particle-coated droplets into non-spherical supracolloidal structures,Journal of Physical Chemistry B,113 (12) 3914-3919 (2009).
  30. L. Bonderer, A.R. Studart, L.J. Gauckler, "Bio-inspired design and assembly of platelet reinforced polymer films",Science, [319] 1069-1073 (2008).
  31. I. Akartuna, A.R. Studart, E. Tervoort, U.T. Gonzenbach, L.J. Gauckler, Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles,Langmuir, 24 (14) 7161-7168 (2008).
  32. I. Akartuna, A.R. Studart, E. Tervoort, L.J. Gauckler, Macroporous Ceramics from Particle-stabilized Emulsions,Advanced Materials, 20 (24) 4714-+ (2008).
  33. U.T. Gonzenbach, A.R. Studart, D. Steinlin, E. Tervoort, and L.J. Gauckler, Processing of particle-stabilized wet foams into macroporous ceramics,Journal of the American Ceramic Society, 90 (11) 3407-3414 (2007).
  34. A.R. Studart, U.T. Gonzenbach, I. Akartuna, E. Tervoort, L.J. Gauckler, "Materials from foams and emulsions stabilized by colloidal particles",Journal of Materials Chemistry, invited highlight article, [17] 3283-3289 (2007).
  35. A.R. Studart, E. Amstad, L.J. Gauckler, "Colloidal stabilization of nanoparticles in concentrated suspensions",Langmuir, [23] (3) 1081-1090 (2007).
  36. A.R. Studart, F. Filser, P. Kocher, L.J. Gauckler, "In vitro lifetime of dental ceramics under cyclic loading in water",Biomaterials, [28] (17) 2695-2705 (2007).
  37. U.T. Gonzenbach, A.R. Studart, E. Tervoort, L.J. Gauckler, Tailoring the microstructure of particle-stabilized wet foams,Langmuir, 23 (3) 1025-1032 (2007).
  38. U.T. Gonzenbach, A.R. Studart, E. Tervoort, L.J. Gauckler, Macroporous ceramics from particle-stabilized wet foams,Journal of the American Ceramic Society, 90 (1) 16-22 (2007).
  39. A.R. Studart, F. Filser, P. Kocher, L.J. Gauckler, Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges,Dental Materials, 23 (1) 106-114 (2007).
  40. A.R. Studart, F. Filser, P. Kocher, H. Luthy, L.J. Gauckler, Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges,Dental Materials, 23 (2) 177-185 (2007).
  41. A.R. Studart, F. Filser, P. Kocher, H. Luthy, L.J. Gauckler, Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges,Dental Materials, 23 (1) 115-123 (2007).



Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top