Home > SNL>

Prof. Ling Bing Kong

School of Materials Science and Engineering

Nanyang Technological University, Singapore

Email: elbkong@ntu.edu.sg


1993 - 1997 Ph.D., Electronic Materials, Xi'an Jiaotong University, China

1989 - 1992 M.Sc., Chemistry/Material Science and Engineering, The University of Science and Technology of China, China

1987 - 1989 B.Sc., Chemistry, Anhui Educational Collage, China

Publications (selected)

  1. H. M. A. Javed, W. X. Que, X. T. Yin, Y. L. Xing, X. B. Liu, A. Asghar, J. Y. Shao and L. B. Kong, Ordered crystalline TiO2 nanohexagon arrays for improving conversion efficiency of dye-sensitized solar cells, J. Alloy. Compd., 646, 106-111 (2015).
  2. H. F. Zhang, C. I. Mark, Y. Wang, L. B. Kong and H. L. W. Chan, A review on the characteristics of the new multiferroic three-ply structure ferroelectric-ferromagnetic nanocomposite, Mater. Sci. Forum, 815, 159-165 (2015).
  3. X. B. Liu, W. X. Que and L. B. Kong, Hydrothermal synthesis of bamboo-shaped nanosheet KNb3O8 with enhanced photocatalytic activity, J. Alloy. Compd., 627, 117-122 (2015).
  4. L. J. Tang, W. Wang, B. Shen, J. W. Zhai and L. B. Kong, Crystallization and properties of strontium barium niobate-based glass-ceramics for energy-storage applications, J. Electron. Mater., 44 [1], 227-234 (2015).
  5. J. Wang, J. Zhang, D. W. Luo, H. Yang, D. Y. Tang and L. B. Kong, Densification and microstructural evolution of yttria transparent ceramics: The effect of ball milling conditions, J. Eur. Ceram. Soc., 35 [3], 1011-1019 (2015).
  6. P. Zhong, W. X. Que, J. Zhang, Y. Yuan, Y. L. Liao, X. T. Yin, L. B. Kong and X. Hu, Enhancing the performance of poly(3-hexylthiophene)/ZnO nanorod arrays based hybrid solar cells through incorporation of a third component, Sci. Chin. Phys. Mechan. Astron., 57 [7], 1289-1298 (2014).
  7. Y. Wang, T. Li, L. B. Kong, H. H. Hng and P. S. Lee, Gas flow induced by ultrasonic cavitation bubble clouds and surface capillary wave, IEEE Trans. Ultrason. Ferroelectr. Freq. Control., 61 [6], 1042-1046 (2014).
  8. H. F. Zhang, L. B. Kong, C. L. Mak, K. W. Kwok, Y. Wang and H. L. W. Chan, Highly enhanced sinterability of fine-grained Ba0.6Sr0.4TiO3-MgO bulk ceramics and in-situ nanocomposite thick films, Ceram. Intern., 40, 10475-10481 (2014).
  9. Q. W. Zhang, J. W. Zhai, H. Q. Li, Z. X. Yue and L. B. Kong, Suppressed ferroelectric relaxor behavior of Mn-modified Ba(Zr0.3Ti0.7)O3 relaxor ceramics, Phys. Status Solidi A, 211 [4], 788-794 (2014).
  10. W. L. Yan, A. Dasari and L. B. Kong, Chinese ink-facilitated fabrication of carbon nanotube/polyvinyl alcohol composite sheets with a high nanotube loading, Comp. Part A, 61, 209-215 (2014).
  11. X. H. Hao, J. W. Zhai, L. B. Kong and Z. K. Xu, A comprehensive review on the progress of lead zirconate-based antiferroelectric materials, Prog. Mater. Sci., 63, 1-57 (2014).
  12. T. S. Zhang, L. B. Kong, X. C. Song, Z. H. Du, W. Q. Xu and S. Li, Densification behaviour and sintering mechanisms of Cu- or Co-doped SnO2: A comparative study, Acta Mater., 62, 81-88 (2014).
  13. X. H. Huang, G. H. Li, L. B. Kong, Y. Z. Huang and T. Wu, Anisotropic surface strain in single crystalline cobalt nanowires and its impact on the diameter-dependent Young’s modulus, Nanoscale, 5, 11643-11648 (2013).
  14. P. Zhong, W. X. Que, Y. N. Liang, X. T. Yin, Y. L. Liao, L. B. Kong and X. Hu, Origin of the boosted exciton separation at fullerene molecule modified poly(3-hexylthiophene)/ZnO interfaces, RSC Adv., 3, 17904-17913 (2013).
  15. D. W. Luo, J. Zhang, C. W. Xu, H. Lin, H. Yang, H. Y. Zhu, G. D. Shao, D. Y. Tang and L. B. Kong, Mode-locked Yb:LuAG ceramics laser, Phys. Status Solidi (C), 10 [6], 967-968 (2013).
  16. Q. W. Peng, J. Gan, S. F. Wang, L. B. Kong, G. R. Chen, Y. X. Yang and G. J. Huang, Controlled synthesis of amine-capped γ-Fe2O3 nanoparticles by a one-step process, Ind. Eng. Chem. Res., 52, 7713-7717 (2013).
  17. L. B. Kong, Z. W. Li, L. Liu, R. Huang, M. Abshinova, Z. H. Yang, C. B. Tang, P. K. Tan, C. R. Deng and S. Matitsine, Recent progress in some materials and structures for specific electromagnetic applications, Intern. Mater. Rev., 58 [4], 203-259 (2013).
  18. L. J. Tang, J. W. Wang, J. W. Zhai, L. B. Kong and X. Yao, Controllable-permittivity and high-tunability of Ba0.5Sr0.5TiO3/MgO based ceramics by composite configuration, Appl. Phys. Lett., 102, 142907 (2013).
  19. S. F. Wang, J. Zhang, D. W. Luo, F. Gu, D. Y. Tang, Z. L. Dong, G. E. B. Tan, W. X. Que, T. S. Zhang, S. Li and L. B. Kong, Transparent ceramics: processing, materials and applications, Prog. Solid State Chem., 41 [1-2], 20-54 (2013).
  20. R. B. Wu, K. Zhou, Z. H. Yang, X. K. Qian, J. Wei, L. Liu, Y. Z. Huang, L. B. Kong and L. Y. Wang, Molten-salt-mediated synthesis of SiC nanowires for microwave wave absorption applications, CrystEngComm, 15, 570-576 (2013).

Profile Details