Home > SNL>
Biography

Prof. Jong Keun Lee

Kumoh National Institute of Technology, South Korea


Email: jklee@kumoh.ac.kr


Qualifications

1990 Ph.D., Dept. of Mechanics and Materials Science, Rutgers University, USA

1989 M.Sc., Dept. of Mechanics and Materials Science,Rutgers University, USA

1982 B.Sc., Dept. of Metallurgy, Yonsei University, Korea


Publications (selected)

  1. “Microencapsulation of self-healing agents with melamine-urea-formaldehyde by the Shirasu Porous Glass (SPG) emulsification technique”, Macromolecular Research, 2011.
  2. “Adhesion Strength of Norbornene-based Self-healing Agents to an Amine-cured Epoxy” Macromolecular Materials and Engineering, 2011.
  3. “Prediction of Viscosity in Liquid Epoxy Resin Mixed with Micro/Nano Hybrid Silica”, Materials Research Society, Vol. 21, No. 2, pp 100-105, 2011
  4. “Cure Kinetics and Dynamic Mechanical Properties of an Epoxy/Polyoxypropylene Diamine System” Polymer(Korea), 2011
  5. “Isothermal physical aging of thin PMMA films near the glass transition temperature” Polymer Bulletin, 65, 8, 825-835 (2010).
  6. “Isothermal Cure Characterization of Fumed Silica/Epoxy Nanocomposites: the glass transition temperature and conversion” Composites A; Applied Science and manufacture, 41, 1, 473-479 (2010).
  7. “Thermal and Mechanical Properties of Short Fiber-Reinforced Epoxy Composites”, Polymer(Korea), Vol. 33, No. 6, pp 1-7, 2009
  8. “Rheokinetic Evaluation of Self-healing Agents Polymerized by Grubbs Catalyst Embedded in Various Thermosetting Systems, Composites Science and Technology; 69 (2009) 2102–2107.
  9. “Synthesis and Characterization of Melamine-Urea-Formaldehyde Microcapsules Containing ENB-Based Self-Healing Agents”, Macromol. Mater. Eng. 2009, 294, 389–395.
  10. “The Influence of Cross-link Density on the Properties of ROMP Thermosets”, Polymer 50 (2009) 1264–1269.
  11. “A tensile test technique for the freestanding PMMA thin films” Current Applied Physics 9 (2009) S107–S109.
  12. “Synthesis and Characterization of Melamine-Urea-Formaldehyde Microcapsules Containing ENB-based Self-healing Agents”, Composites Science and Technology
  13. “Rheokinetic Evaluation of Self-healing Agents Polymerized by Grubbs Catalyst Embedded in Various Thermosetting Systems”, Composites Science and Technology
  14. “Isothermal Cure Characterization of ROMP Healing Agents for Autonomic Damage Repair: The Glass Transition Temperature and Conversion”, Journal of Thermal Analysis and Calorimetry; 2007; 89, 453-457.
  15. “The Influence of Cross-linking Agents on Ring-Opening Metathesis Polymerized Thermosets”, Journal of Thermal Analysis and Calorimetry; 2007; 89, 459-464.
  16. “Thermal Analysis of Ring Opening Metathesis Polymerized Healing Agents” Journal of Polymer Science Part B: Polymer Physics; 2007; 45, 1771-1780.
  17. “Characterization of diene monomers as healing agents for autonomic damage repair” J Appl Polym Sci 2006, 101, 1266-1272.2007
  18. “Synthesis and curing of new aromatic azomethine epoxies with alkoxy side groups”, European Polymer J., 40, 259-265 (2004)
  19. “Recycling of waste XLPE using a modular intermeshing co-rotating twin screw extruder”, Elastomer, 39, 131-141 (2004)
  20. “Characterization of dicyclopentadiene and 5-ethylidene-2-norbornene as self-healing agents for polymer composite and its microcapsules”, Macromolecular Research, 12(5), 478-483 (2004)
  21. “Effects of light intensity and temperature on cure behavior of visible light-activated dental resins”, J. Korea Research Society of Dental Materials, 31(4), 307-312 (2004)
  22. “Evolution of properties with increasing cure of a thermosetting epoxy/aromatic amine system: physical aging”, J Applied Polymer Science, 90, 2665-2675 (2003)
  23. “Erasure behavior of isothermal physical aging effect below glass transition temperature in a fully cured epoxy resin: DSC measurement”, Polymer J., 35, 191-196 (2003)
  24. “Synthesis of chitooligosaccharide derivative with quaternary ammonium group and its antimicrobial activity against Streptococus mutans”, International Journal of biological macromolecules, 32, 23-27 (2003)
  25. “Time-temperature-intensity-transformation cure diagram for visible-light curable dimethacrylate resins”, Polymer J., 35(10), 778-784 (2003)
  26. “Dynamic mechanical analysis of a visible-light curable urethane dimethacrylate based dental resins”, Polymer J., 11, 890-896 (2003)
  27. “Change of properties during post-irradiation of a UDMA based dental resin”, J. Biomedical Materials Research, Part B: Appl. Biomater., 68B, 216-221 (2003)
  28. “Epoxidized polybutadiene as a thermal stabilizer for poly(3-hydroxybutylate). II. thermal stabilization of poly(3-hydroxybutyrate) by epoxidized polybutadiene”, Fibers and Polymers, 4(4), 195-198 (2003)
  29. “Cationic cure of epoxy resin by an optimum concentration of N-benzylpyrazinium hexafluoroantimonate”, Macromolecular Research, 10, 34-39 (2002)
  30. “Synthesis and Curing of rod-like epoxies with alkoxy groups as flexible side chain", Polymer Bulletin, 48, 111-118 (2002)
  31. “Manufacturing process of microcapsules for autonomic damage repair for Polymeric Composite”, J. The Korean Society for Composite Materilas, 15, 32-39 (2002)
  32. “Effects of Mechanical and Thermal Characteristics on Combined Environmental factors in Carbon Fiber Reinforced Composite”, J. Mechanical Engineering, A 26(7), 1416-1425 (2002)
  33. “Epoxidized polybutadiene as a thermal stabilizer for poly(3-hydroxybutylate). I. Effect of epoxidation on the thermal properties of polybutadiene”, Fibers and Polymers, 3(3), 109-112 (2002)
  34. “Macroscopic observation of healing process in stress-whitened polypropylene under hydrostatic pressure”, Polymer Engineering and Science, 42(12), 2351-2360 (2002)
  35. “Erasure Below the Glass Transition Temperature of the Effect of Isothermal Physical Aging in a Fully Cured Epoxy/Amine Thermosetting System”, J. Applied Polymer Science, 81(2), 396-404 (2001)
  36. “Conjugated Vinyl Derivatives of Chitooligosaccharide: Synthesis and Characterization”, J. Polymer Science A: Polymer Chemistry, 39, 880-887 (2001)
  37. “Cure monitoring in an epoxy/imidazole system using fluorescence spectroscopy”, Polymer-Korea, 25(2), 199-207 (2001)
  38. “Properties of epoxy based composites-Isothermal Physical aging”, Polymer-Korea, 25(3), 359-366 (2001)
  39. "Healing of stress whitening in polyethylene and polypropylene at/below room temperature", Polymer Engineering and Science, 40(8), 1783-1795 (2000)
  40. “Liquid crystalline twin epoxy monomers based on azomethine mesogen: synthesis and cure with aromatic diamines", Polymer, 41, 7617-7625 (2000).
  41. “Effect of mixing ratio on thermal stability in an epoxy/imidazole system”, J. fiber-Korea, 37, 623-628 (2000)

Profile Details

NULL