Dr. Sajad
Alimohammadi
School of Mechanical and Design Engineering, Technological University Dublin, Ireland
Assistant Professor
Email: sajad.alimohammadi@tudublin.ie
Qualifications
2015-2018 Postdoctoral Research Fellow, the University
of Dublin, Ireland
2012-2015 Ph.D., Trinity College Dublin, the University
of Dublin, Ireland
2011-2012 Graduate Researcher, Braunschweig
University of Technology, Germany
2007-2009 M.Eng., Sharif University of Technology, Iran
Publications
(Selected)
-
Alimohammadi,
S., Persoons, T. “A Novel Linear Air Amplifier Technology to Replace Rotary
Fans in Data Center Server Rack Cooling”, IEEE 26th Int. Worksh. Therm. Invest.
ICs and Syst. (Germany), 2020.
-
Abdelsalam
Y., Alimohammadi S., Persoons T., “The Application of Evolutionary Algorithms
in Multi-Objective Performance Design and Optimization of Novel Finned
Heatsinks”, J. Thermal Science and Engineering Applications, 12 (2), 2020.
-
Cressall
R., Alimohammadi S., Persoons T, “Reduced‐Order Models for Synthetic Jet Actuators:
Applications in Heat Transfer and Flow Control”, MDPI
Actuators, 7, 2019.
-
Jaakko
McEvoy, Alimohammadi S., Persoons, “Experimental Investigation of Flow
Pulsation Waveforms in Rectangular Mesochannels for High Heat Flux Electronics
Cooling”, Exp. Thermal Fluids Sciences, 109, 2019.
-
Sakanova
A., Alimohammadi S., McEvoy J., Battaglioli S., Persoons T, “Multi-objective
Opt. of a Generic Hybrid-Cooled Data Centre Single Blade Server”, Int. J. of
Appl. Therm. Eng, 156, 2019.
-
Gibbons,
L., Kennedy, D., Coyne, B., Denny, E., Persoons, T., Alimohammadi, S., “A
Techno-Economic Analysis of Current Cooling Technologies within Irish Data
Centers”, IEEE 25th Int. Worksh. Therm. Invest. ICs and Syst. (Italy), 2019.
-
Oude
Essink E., McEvoy J., Alimohammadi S., and Persoons T, “Microscale Heat
Transfer Modulation For Server CPU Cooling Using Movable Structures”, HEFAT
2019 - 14th Int. Conf. on Heat Trans., Fluid Mech. and Thermodynamics, 2019.
-
Blythman
R., Alimohammadi S., Persoons T., Jeffers N., Murray D. B., “Parametric
Analysis of Laminar Pulsating Flow in a Rectangular Channel”, J. Heat and Mass
Trns., 54, 2018.
-
Alimohammadi
S., McEvoy J., Delauré Y., Persoons T., “Benchmarking the Application of
Detached Eddy Simulation Techniques in Data Centre Server Flow Modelling using
Stereoscopic Particle Image Velocimetry”, IEEE 24th Int. Worksh. Therm. Invest. ICs and Syst. (Sweden), 2018.
-
McEvoy
J., Alimohammadi S., Persoons T., “Experimental Investigation of Flow Pulsation
Waveforms in Rectangular Mesochannels for High Heat Flux Electronics Cooling”,
5th International Conference on Experimental Fluid Mechanics ICEFM 2018 Munich
(Germany), 2019.
-
Sakanova
A., Alimohammadi S., McEvoy J., Persoons T., “Hybrid-Cooled Data Centre Server
Layout Optimization for Air-Side Heat Recovery”, IEEE 24th Int. Worksh. Therm.
Invest. ICs and Syst. (Sweden), 2018.
-
Zhao
K., Alimohammadi S., Okolo P., Kennedy J., Bennett G., “Aerodynamic Noise
Reduction using Dual-Jet Planar Air Curtains”, J. of Sound and Vibration, 432,
2017.
-
Abdelsalam
Y., Alimohammadi S., Pelletier Q., Persoons T., “A Multi-Objective Genetic
Algorithm Optimization of Plate-Fin Heatsinks”, IEEE 23rd Int. Worksh. Therm.
Invest. ICs and Syst. (Amsterdam), 2017.
-
Alimohammadi
S., Baudin N., Kempers R., Persoons T., “Multi-Objective Shape Optimization of
Natural Convection Cooled Plate-Fin Heat Sinks with Localized Heat Sources”,
2nd Therm. & Fluid Eng. Conf., TFEC-IWHT2017, Las Vegas, NV (USA), 2017.
-
Baudin
N., Alimohammadi S., Kempers R., Persoons T., “Comparison of a Traditional Heat
Sink Versus a Vapor Chamber Heat Sink Cooled by Forced Convection”, 2nd Therm.
& Fluid Eng. Conf., TFEC-IWHT2017, Las Vegas, NV (USA), 2017.
-
Alimohammadi
S., Fanning E., Persoons T., Murray D. B., “Characterization of Flow Vectoring
Phenomenon in Adjacent Synthetic Jets using CFD and PIV”, Int. J. Computers and
Fluids, 140, 2016.
-
Alimohammadi
S., Persoons T., Murray D. B., “On the Numerical-Experimental Analysis and
Scaling of Convective Heat Transfer to Pulsating Impinging Jets”, Int. J.
Thermal Sciences, 98, 2015.
-
Alimohammadi
S., Pelletier Q., Persoons T., “Low Noise Air Amplifiers” Cooling Technologies
Research Center, Rev. Meeting Conf., Purdue University (USA), 2015.
-
Alimohammadi
S., Persoons T., Murray D. B., 2015, “A Validated Numerical Approach for
Characterization of Unsteady Impinging Jets”, 18th Crossland Symposium
(Limerick), 2015.
-
Alimohammadi
S., Fanning, E., Murray D. B. and Persoons T., “Fluid Flow & Heat Transfer
in Adjacent Synthetic Jets”, 14th UK Heat Transfer Conf. 2015 (Scotland), 2015.
-
Alimohammadi
S., Murray D., and Persoons T., “Experimental Validation of a CFD Methodology
for Transitional Flow Heat Transfer Characteristics of a Steady Impinging Jet”,
J. Heat Transfer, 136 (9), 2014.
-
Alimohammadi
S., Dinneen P., Persoons T., and Murray D. B., “Thermal Management Using
Pulsating Jet Cooling Technology”, Journal of Physics: Thermal Management of
Electronic Systems, 525, 2014.
-
Alimohammadi
S., Persoons T., and Murray D. B., “A numerical-experimental study of heat
transfer enhancement using unconfined steady and pulsating turbulent air jet
impingement”, Proc. 15th Int. Heat Transfer Conf. IHTC15-8765 (Kyoto, Japan),
2014.
-
Alimohammadi
S., Persoons T., Murray D. B., “Developing a Validated CFD Methodology for
Convective Heat Transfer to Impinging Jet Flows”, 1st CADFEM Ireland &
ANSYS Regional Conf. (Ireland), 2014.
-
Alimohammadi
S., Persoons T., Murray D. B., Tehrani M. S., Farhanieh B., and Koehler J., “A
Validated Numerical-Experimental Design Methodology for a Movable Supersonic
Ejector Compressor for Waste-Heat Recovery”, J. Thermal Science and Engineering
Applications, 6(2), 2013.
Personal Website:
https://www.linkedin.com/in/sajad-alimohammadi/
https://www.tcd.ie/mecheng/staff/salimoha/