Dr. Moola Mohan Reddy

Faculty of Engineering and Science

Curtin University

CDT 250, Miri, Sarawak,98009, Malaysia

Associate Professor

Email: mohan.m@curtin.edu.my

Qualifications

2013 Ph.D., Machining of Advanced ceramics, Curtin University

1999 M.Tech., Mechanical system dynamics and control, IIT, Kharagpur, India

1996 B.Sc., Mechanical engineering from Institution of Engineers

Publications (Selected)

1. Debnath, S, Reddy, M.M, Pramanik, A, 2019 “ Dry and Near-Dry Machining Techniques for Green Manufacturing”, Innovations in Manufacturing for Sustainability (Book series), 1-27.
2. Dambatta, YS, Sayuti, M, Sarhan, Hamdi, M, Manladan, SM, Reddy, M.M, 2019 “Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic”, Journal of Manufacturing Processes 41, 135-147.
3. Reddy, M.M, Yong Chai Nie, V, 2019 “ Evaluation of Surface Roughness and Tool Wear in High Speed Machining of Inconel 718, Materials Science Forum, 943, 66-71.
4. Reddy, M.M, Sng, WS, 2019 “ Temperature and Cutting Force Analysis in Turning of Steel AISI 4140 using Advanced Ceramics tools” Materials Science and Engineering,495 (1), 012090.
5. Reddy, M.M, Kumar, M, Shanmugam, K, 2018 “Finite element analysis and modeling of temperature distribution in turning of titanium alloys”, Metallurgical and Materials Engineering, 24, 59-69.
6. CH Hoe, Reddy M M, Lee V C C and Debnath S, 2018 “ Chatter behavior in the Milling Process of Inconel 718: Effects of Tool Edge Radius”, MATEC Web of Conferences, 202, 02006.
7. Bapi Sarkar, Reddy M M, and Sujan Debnath, 2017 “Effect of machining parameters on surface finish of Inconel 718 in end milling”, MATEC Web of Conferences, 95, 02009 (Scopus).
8. Chien S E M, Reddy M M, Lee V C C and Debnath S, 2017. “The Study of Coated Carbide Ball End Milling Tools on Inconel 718 Using Numerical Simulation Analysis to Attain Cutting Force and Temperature Predictive Models at the Cutting Zone”, Materials Science Forum, 882, pp 28-35 (ISI).
9. Sujan, D., Reddy, M.M. and Qua S.Y. (2016) “Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method”, Measurement, Vol 78, pp 111-119 (ISI).
10. Reddy, M.M., Joshua, C.X.H. (2016) “Performance of Silicon carbide whisker reinforced ceramic inserts on Inconel 718 in end milling process”, IOP Conference Series: Materials Science and Engineering, 121, 012005(ISI).
11. Reddy, M.M., Sujan, D. and Lee L.C. (2015) “Modeling of Temperature Distribution when Machining Inconel 718 in Turning process”, Power Electronics and Energy Engineering, pp 207-210(ISI index).
12. Reddy, M.M., Alexander, G., Abou El, H.K.A. and Sujan, D. (2014) “Machinability of Aluminum Nitride Ceramic using TiAlN and TiN Coated Carbide Tool Insert”, Materials Science Forum, 773-774: 445-455(ISI).
13. Sujan, D, Pang, X.B., Rahman, M.E., and Reddy, M.M. (2014) “Performance of Solder Bond on Thermal Mismatch Stresses in Electronic Packaging Assembly”, Materials Science Forum, 773-774: 242-249(ISI).
14. Alexander, G. and Reddy, M.M. (2014) “Advanced Ceramics: Some Challenges and Solutions in Machining by Conventional Methods”, Applied Mechanics and Materials, 624: 42-47(ISI).
15. Ng Samuel, D., Sujan, D., Rahman, M.E., Nabinejad, O., and Reddy, M.M. (2014). “Oil Palm Fibre and Nano-Silica Reinforced Epoxy Composite Material”, Applied Mechanics and Materials, 980: 23-27(Scopus).
16. Sujan, D., Reddy, M.M. and Qua S.Y. (2014) “Environmental friendly cutting fluids and cooling techniques in machining: a review” Journal of Cleaner Production, 83:33-47(ISI).
17. Nabinejad, O., Sujan, D., Rahman, M.E., Reddy, M.M., Liew, W.Y.H., Davies, IJ. (2014) “The effect of alkali treatment of OPKS filler on mechanical property of polyester-composite”, Advanced Materials Research, 980, 86-90 (Scopus).
18. Reddy, M.M., Alexander, G., Abou El, H.K.A. and Sujan, D. (2013) “Surface Roughness Model when Machining Aluminum Nitride Ceramic with Two Flute Square end Micro Grain Solid Carbide end Mill”, Advanced Materials Research, 747 :282-286 (ISI).
19. Reddy, M.M., Alexander, G., and Abou El, H.K.A. (2012) “Optimization of various cutting parameters on the surface roughness of the machinable glass ceramic with two flute square end mills of micro grain solid carbide”, International Journal of Precision Engineering and Manufacturing, 13(9), 1549-1554 (ISI).
20. Reddy, M.M., Alexander, G., Abou El H.K.A., Sujan, D., Ali, M.Y. and Malique, M.A. (2012) “Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide insert”, Advanced Materials Research, 576:76-79 (Scopus).
21. Sujan, D., Yeo, C.W., Rahman, M.E., Reddy, M.M., Maleque, M.A. and Ali, M.Y. (2012) “Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties” Advanced Materials Research, 576:370-373(Scopus).
22. Reddy, M.M., Alexander, G. and Abou El, H.K.A. (2011) “Influence of cutting parameters on Machinable Glass ceramic processed by end milling”, Advanced Materials Research, 264-265:825-830(ISI).