Dr. Hamid Fallahdoost

Binghamton University

State University of New York

USA

Email: hfallah1@binghamton.edu

Qualifications

2020 Ph.D., Binghamton University, USA

2013 M.Sc., Khaje Nasir Toosi University of Technology, IRAN

Publications (Selected)

1. H. Fallahdoost, H. Khorsand, R. Eslami-Farsani and E. Ganjeh, “On the tribological behavior of nano alumina reinforced low alloy sintered steel” Materials and Design, 57, 60-66, (2014). (https://doi.org/10.1016/j.matdes.2013.12.030)
2. H. Fallahdoost, A. Nouri, A. Azimi, “Dual functions of TiC nanoparticles on tribological performance of Al/graphite composites” Journal of Physics and Chemistry of Solids, 93, 137-144, (2016). (https://doi.org/10.1016/j.jpcs.2016.02.020)
3. Azimi, G.M. Owolabi, H. Fallahdoost, N. Kumar, and G. Warner. “High Strain Rate Behavior of Ultrafine Grained AA2519 Processed via Multi Axial Cryogenic Forging”. Metals, 9(2),115 (2019). (https://doi.org/10.3390/met9020115)
4. Azimi, G.M. Owolabi, H. Fallahdoost, N. Kumar, and H. Whitworth. “Microstructure and Quasi-Static Mechanical Behavior of Cryoforged AA2519 Alloy”. Materials Sciences and Applications, 10(2), 137-149 (2019). (https://doi.org/10.4236/msa.2019.102011)
5. Azimi, G.M. Owolabi, H. Fallahdoost, N. Kumar, and G. Warner. "Dynamic Failure Investigation in Ultrafine Grained AA2219: Mechanical and Microstructural Analysis." Metals and Materials International, 1-12 (2019). (https://doi.org/10.1007/s12540-019-00254-x)
6. Azimi, G.M. Owolabi, H. Fallahdoost, N. Kumar, H. Whitworth, and G. Warner, “AA2219 Aluminum Alloy Processed via Multi-Axial Forging in Cryogenic and Ambient Environments” Journal of Materials Science Research, 8(2), 1-9 (2019) (https://doi.org/10.5539/jmsr.v8n2p1)
7. Karimi, R. Soltani, M. Ghambari, H. Fallahdoost, “High temperature oxidation resistance of plasma sprayed and surface treated YSZ coating on Hastalloy X” Surface and Coatings Technology, 321, 378-385 (2017). (https://doi.org/10.1016/j.surfcoat.2017.05.002)
8. Azimi, H. Fallahdoost, O. Nejadseyfi, “Microstructure, mechanical and tribological behavior of hot-pressed mechanically alloyed Al–Zn–Mg–Cu powders” Materials and Design, 75, 1-8, (2015). (https://doi.org/10.1016/j.matdes.2015.03.011)
9. Azimi, A. Shokuhfar, O. Nejadseyfi, H. Fallahdoost, S. Salehi. “Optimizing consolidation behavior of Al 7068–TiC nanocomposites using Taguchi statistical analysis” Transaction of nonferrous metals society of China, 25, 2499-2508. (2015). (https://doi.org/10.1016/S1003-6326(15)63868-7)

Profile Details

LinkedIn: www.linkedin.com/in/hamid-fallahdoost-36532176