Dr. Wuliang Yin

School of Electrical and Electric Engineering

The University of Manchester, UK

Senior Lecturer



1999  Ph.D., Tsinghua University, Automotive Electronics

1995  M.Sc., Tianjin University, Electronic Measurement and Instrumentation

1992  B.Sc., Tianjin University, Electronic Measurement and Instrumentation


  1. W Yin, K Xu,  A Novel Triple-Coil Electromagnetic Sensor for Thickness Measurement Immune to Lift-Off Variations, IEEE Transactions on Instrumentation and Measurement, (2015), doi: 10.1109/TIM.2015.2479106
  2. Y Xie, W Yin, Z Liu, A Peyton, Simulation of Ultrasonic and EMAT Arrays Using FEM and FDTD, Ultrasonics. (2015), doi:10.1016/j.ultras.2015.10.020
  3. Cui, Z., Wang, H., & Yin, W. (2015). Electrical Capacitance Tomography With Differential Sensor. IEEE Sensors Journal, 15(9), 5087-5094.
  4. Cui, Z., Wang, H., Yin, W., & Yang, W. (2015). Impulsive noise reduction in digital phase-sensitive demodulation by nonlinear filtering. Measurement Science and Technology, 26(7), 075401.
  5. Z Liu, Y Hu, J Fan, W Yin, X Liu, C He, B Wu (2015). Longitudinal mode magnetostrictive patch transducer array employing a multi-splitting meander coil for pipe inspection, NDT & E International accepted.
  6. Y Zhao, W Yin, C Ktistis, D Butterworth, AJ Peyton, Determining the Electromagnetic Polarizability Tensors of Metal Objects during In-line Scanning, IEEE Transactions on Instrumentation and Measurement, accepted.
  7. Y Zhao, W Yin, C Ktistis, D Butterworth, AJ Peyton, On the low-frequency electromagnetic responses of in-line metal detectors to metal contaminants, IEEE Transactions on Instrumentation and Measurement, 63 (2014): 3181-3189
  8. M He, Q Zhao, W Yin, Calculation of 3D Sensitivity Matrix for Electromagnetic Tomography System Using Boundary Elements and the Perturbative Approach, Journal of Shanghai Jiaotong University (Science), 3(2014)
  9. W Zhu, H Yang, A Luinenburg, F Van den Berg, S Dickinson, W Yin and A J Peyton, The development and deployment of an on-line multi-frequency electromagnetic system to monitor hot transformation on the run-out table of a hot strip mill, Iron and Steel Making, 41 ( 2014): 685-693, 2015 Williams Award
  10. J W Wilson, N Karimian, J Liu, W Yin, C L Davis, AJ Peyton, Measurement of the magnetic properties of P9 and T22 steel taken from service in power station, Journal of Magnetism and Magnetic Materials 360 (2014): 52-58
  11. T Yang, G Chen, W Yin, P Hu, Q Zhao, A high frequency digital induction system for conductive flow level measurements, Flow Measurement and Instrumentation, 37 (2014): 83-91
  12. N Karimiana,J W Wilson, AJ Peyton, W Yin, J Liu, C L Davis, Differential permeability behaviour of P9 and T22 power station Steels, Journal of Magnetism and Magnetic Materials, 352 (2014): 81–90
  13. J Hao, W Yin, Q Zhao, K Xu, G Chen, Preconditioning of projected SIRT algorithm for electromagnetic tomography, Flow Measurement and Instrumentation, 29 (2013): 39–44
  14. Q Zhao, G Chen, J Hao, K Xu, W Yin, Numerical approach for the sensitivity of high frequency magnetic induction tomography system based on boundary elements and perturbation method, Measurement Science and Technology, 24(2013) 074004 doi:10.1088/0957-0233/24/7/074004
  15. Q Zhao, J Hao, W Yin, A simulation study of flaw detection for rail sections based on high frequency magnetic induction sensing using the boundary element method, Progress In Electromagnetics Research 141 (2013): 309-325
  16. W Yin, J Liu, N Karimian, XJ Hao, L Zhou, AJ Peyton, M Strangwood, CL Davis, Measurement of Electromagnetic Properties of Power Station Steels, NDT & E international  51 (2012):135-141
  17. W Zhu, S Cruchley, W Yin, XJ.Hao, C L Davis, and A J Peyton. Evaluation of rail decarburisation depth using a H-shaped electromagnetic sensor. NDT & E international. 46 (2012): 63-69
  18. Th Wondrak, S Eckert, V Galindo, G Gerbeth, F Stefani, K Timmel, AJ Peyton, W Yin, Liquid metal experiments with swirling flow submerged entry nozzle, Ironmaking & Steelmaking, 39 (2012): 1-9 * 2014 Williams Award
  19. N Terzija, W Yin, G Gerbeth, et al. Use of electromagnetic induction tomography for monitoring liquid metal/gas flow regimes on a model of an industrial steel caster,  Measurement Science & Technology, 22 (2011)
  20. N Terzija, W Yin, G Gerbeth, et al. Electromagnetic inspection of a two-phase flow of GaInSn and argon, Flow Measurement and Instrumentation, 22(2011): 10-16
  21. W Yin, G Chen, LJ Chen, B Wang, The Design of a Digital Magnetic Induction Tomography (MIT) System for Metallic Object Imaging Based on Half Cycle Demodulation, IEEE Sensors Journal, 11(2011): 2233~2240
  22. T Wondrak, S Eckert, G Gerbeth, K Klotsche, F Stefani, K Timmel, A Peyton, N Terzija, and W Yin, Combined Electromagnetic Tomography for Determining Two-phase Flow Characteristics in the Submerged Entry Nozzle and in the Mould of a Continuous-Casting Model, Metallurgical and Materials Transactions B 42(2011): 1201-1210
  23. W Zhu, W Yin, AJ Peyton, et al. Modelling and experimental study of an electromagnetic sensor with an H-shaped ferrite core used for monitoring the hot transformation of steel in an industrial environment, Ndt & E International 44 (2011): 547-552 ,
  24. W Yin, AJ Peyton, Improvement of signal-to-noise ratio and image stability in magnetic inductance tomography by exploiting transient response analysis”, IET Image Processing,5( 2011): 508–512

Profile Details


Last Updated: August, 2016.

Free SCIRP Newsletters
Copyright © 2006-2023 Scientific Research Publishing Inc. All Rights Reserved.