Stress Relief Groove; Stress Concentration Factor; Finite Element Analysis; Pressure Vessel - Articles

Design Optimization of Stress Relief Grooves in Lever Guide of Pressure Vessel for Food Processing (Articles)

Yuichi Otsuka, Hamirdin Bin Baron, Yoshiharu Mutoh

Open Journal of Safety Science and Technology Vol.2 No.1，March 28, 2012

DOI: 10.4236/ojsst.2012.21001 7,656 Downloads 13,617 Views Citations
Three-Dimensional Stress Concentration Factor in Finite Width Plates with a Circular Hole (Articles)

Murilo Augusto Vaz, Julio Cesar Ramalho Cyrino, Gilson Gomes da Silva

World Journal of Mechanics Vol.3 No.3，June 4, 2013

DOI: 10.4236/wjm.2013.33013 9,426 Downloads 15,796 Views Citations
Stress Analysis for Reactor Coolant Pump Nozzle of Nuclear Reactor Pressure Vessel (Articles)

Lijing Wen, Chao Guo, Tieping Li, Chunming Zhang

Journal of Applied Mathematics and Physics Vol.1 No.6，December 3, 2013

DOI: 10.4236/jamp.2013.16013 5,828 Downloads 9,650 Views Citations
Stress Analysis of Thin-Walled Pressure Vessels (Articles)

Ahmed Ibrahim, Yeong Ryu, Mir Saidpour

Modern Mechanical Engineering Vol.5 No.1，February 3, 2015

DOI: 10.4236/mme.2015.51001 57,964 Downloads 65,796 Views Citations
Comparative Analysis of the Distribution Characteristics of Floor Stress Field between Gob-Side Entry Retaining with Roof Cutting and Conventional Mining (Articles)

Weifeng Xue, Chaoyang Liu, Chao Li, Yongguang Chen, Xiaoping Xi, Feng Wang

Journal of Geoscience and Environment Protection Vol.10 No.12，December 7, 2022

DOI: 10.4236/gep.2022.1012002 77 Downloads 437 Views Citations
Mechanical Stress Analysis of a 600MW Supercritical Boiler Superheater Outlet Header (Articles)

Dongyi Li, Zhongguang Fu, Qiang Zhang, Ting He

Engineering Vol.5 No.1B，January 15, 2013

DOI: 10.4236/eng.2013.51B012 6,761 Downloads 8,983 Views Citations
Fracture Toughness of Glass-Carbon (0/90)_s Fiber Reinforced Polymer Composite – An Experimental and Numerical Study (Articles)

P.S. Shivakumar Gouda, S.K. Kudari, S. Prabhuswamy, Dayananda Jawali

J. of Minerals and Materials Characterization and Eng. Vol.10 No.8，June 27, 2011

DOI: 10.4236/jmmce.2011.108052 8,843 Downloads 11,726 Views Citations
Study Two-Dimensional and Three-Dimensional of the Stress Concentration of the Traction Arm of the NEW HOLLAND TT75 Tractor in Service in CHAD (Articles)

Sindang Djondang, Tikri Bianzeubé, Ngoidita Natebaye, Gamma Adjeffa

Open Journal of Applied Sciences Vol.13 No.2，February 27, 2023

DOI: 10.4236/ojapps.2023.132018 96 Downloads 375 Views Citations
Location Results for Brace Spacing in Gap Tubular “K” Joints Using FEM (Articles)

P. N. Jiki

Modern Mechanical Engineering Vol.3 No.1，February 27, 2013

DOI: 10.4236/mme.2013.31007 4,354 Downloads 7,354 Views Citations
Finite Element Analysis for Groove Wander Prediction of Passenger Car Tires with the Longitudinal Tread Grooves (Articles)

Kyoung Moon Jeong, Sung Ju Kang, Hyoung Seok Kim, Kee Woon Kim

Engineering Vol.8 No.1，January 21, 2016

DOI: 10.4236/eng.2016.81002 6,524 Downloads 8,892 Views Citations
Finite Element Analysis of In-Plane Displacements and Von-Mises Stresses in Ellipsoidal and Circular Cylinderical Petroleum Tankers (Articles)

Oluleke Oluwole, Eyere Emagbetere

Engineering Vol.5 No.2，February 6, 2013

DOI: 10.4236/eng.2013.52024 8,101 Downloads 12,559 Views Citations
Micro-Modelling Approach to Predict the Influence of Hydrogen Pressure on Short Crack Behaviour (Articles)

Claude Lincourt, Jacques Lanteigne, Madhavarao Krishnadev, Carl Blais

Modeling and Numerical Simulation of Material Science Vol.3 No.3A，August 8, 2013

DOI: 10.4236/mnsms.2013.33A006 2,768 Downloads 4,704 Views Citations
This article belongs to the Special Issue on Computational Fracture and Fatigue of Materials
Stresses in the Scapular Fossa Do Not Exceed the Yield Stress When Elevated up to 135 Degrees of Abduction after Reverse Shoulder Arthroplasty (Articles)

Rina Sakai, Tomonori Kenmoku, Ryo Tazawa, Kazuhiro Yoshida, Tomomi Mizuhashi, Masanobu Ujihira

Journal of Biomedical Science and Engineering Vol.17 No.2，February 7, 2024

DOI: 10.4236/jbise.2024.172003 121 Downloads 366 Views Citations
Investigation of the Effects of Profile Shift in Helical Gear Mechanisms with Analytical and Numerical Methods (Articles)

Gultekin Karadere, Ilhan Yilmaz

World Journal of Mechanics Vol.8 No.5，May 22, 2018

DOI: 10.4236/wjm.2018.85015 1,112 Downloads 3,981 Views Citations
Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting (Articles)

Sinitsyna Vasilya, Sinitsyn Anton

Modern Mechanical Engineering Vol.4 No.4，November 27, 2014

DOI: 10.4236/mme.2014.44019 5,102 Downloads 6,291 Views Citations
A Finite Element Study of Crack Behavior for Carbon Na-notube Reinforced Bone Cement (Articles)

Kaveh PourAkbar Saffar, Ahmad Raeisi Najafi, Manssour H. Moeinzadeh, Leszek J. Sudak

World Journal of Mechanics Vol.3 No.5A，August 23, 2013

DOI: 10.4236/wjm.2013.35A003 3,941 Downloads 6,463 Views Citations
This article belongs to the Special Issue on Solid Mechanics and Its Applications
Mechanic Analysis of the Key Node in Steel Truss Bridge (Articles)

Simo Fankam Gyldas Dimick

World Journal of Mechanics Vol.13 No.3，March 31, 2023

DOI: 10.4236/wjm.2023.133004 143 Downloads 622 Views Citations
Enhancing Stress Intensity Factor Reduction in Cracks Originating from a Circular Hole in a Rectangular Plate under Uniaxial Stress through Piezoelectric Actuation (Articles)

Gopi Krishna Konda, Jens Schuster, Yousuf Pasha Shaik

Materials Sciences and Applications Vol.15 No.1，January 23, 2024

DOI: 10.4236/msa.2024.151001 124 Downloads 561 Views Citations
Effect of Increasing Speed on Stress of Biaxial Bogie Frames (Articles)

Mohammad Zehsaz, Farid Vakili Tahami, Ali Ziaei Asl, Fatemeh Ahmadian

Engineering Vol.3 No.3，March 7, 2011

DOI: 10.4236/eng.2011.33032 8,025 Downloads 14,733 Views Citations
Effects of Curved Periacetabular Osteotomy on the Stress Fields of the Pubic Rami and Ischium: A Finite Element Model Analysis (Articles)

Norio Imai, Yoichiro Dohmae, Ken Suda, Dai Miyasaka, Tomoyuki Ito, Naoto Endo

Open Journal of Orthopedics Vol.3 No.4，August 12, 2013

DOI: 10.4236/ojo.2013.34036 3,074 Downloads 4,674 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies