Minimal Cutting Fluid Application - Articles - Scientific Research Publishing

Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid (Articles)

K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210102 5,252 Downloads 9,861 Views Citations
Vegetable and Mineral Used Oils as Cutting Fluids: Effect on Surface Roughness of Aluminum Alloy (Articles)

Nabeel Gharaibeh

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.4，October 12, 2016

DOI: 10.4236/jsemat.2016.64016 3,329 Downloads 6,040 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 3,904 Downloads 6,789 Views Citations
Particles Removal from a Moving Tube by Blowing Systems: A CFD Analysis (Articles)

Giovanni Lombardi, Rubens Curatola

Engineering Vol.5 No.3，March 19, 2013

DOI: 10.4236/eng.2013.53037 4,538 Downloads 6,518 Views Citations
Physiological Fluid Specific Agglomeration Patterns Diminish Gold Nanorod Photothermal Characteristics (Articles)

Kristen K. Comfort, Jared W. Speltz, Bradley M. Stacy, Larry R. Dosser, Saber M. Hussain

Advances in Nanoparticles Vol.2 No.4，November 5, 2013

DOI: 10.4236/anp.2013.24046 4,673 Downloads 7,673 Views Citations
Research on Applying Nano Cutting Oils in Spur Gear Hobbing Process (Articles)

Tuan Ngo, Vi Hoang, Sinh Hoang

World Journal of Engineering and Technology Vol.5 No.2，May 25, 2017

DOI: 10.4236/wjet.2017.52023 1,561 Downloads 3,324 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2，May 31, 2023

DOI: 10.4236/mme.2023.132003 204 Downloads 680 Views Citations
Interaction of Navigation with Minimal Access Surgery (Articles)

Siegfried Beller

Surgical Science Vol.3 No.6，June 20, 2012

DOI: 10.4236/ss.2012.36059 4,256 Downloads 6,816 Views Citations
Analysis of Stochastic Reliability Characteristics of a Repairable 2-out-of-3 System with Minimal Repair at Failure (Articles)

Ibrahim Yusuf, Fatima Salman Koki

Applied Mathematics Vol.4 No.8，July 24, 2013

DOI: 10.4236/am.2013.48151 5,309 Downloads 7,125 Views Citations
Correlation between the Degree of Liver Fibrosis and Driving Test Alterations as an Indicator of Minimal Hepatic Encephalopathy (Articles)

Carlos Tornero, Simona Cioaia, Marina Llopis, Ana Ventura

Open Journal of Gastroenterology Vol.5 No.4，April 15, 2015

DOI: 10.4236/ojgas.2015.54006 3,503 Downloads 4,268 Views Citations
Theory and Application of Numerical Simulation of Chemical Flooding in High Temperature and High Salt Reservoirs (Articles)

Yirang Yuan, Aijie Cheng, Danping Yang, Changfeng Li

International Journal of Geosciences Vol.5 No.9，August 22, 2014

DOI: 10.4236/ijg.2014.59082 2,573 Downloads 3,323 Views Citations
Effects of Cutting Interval between Harvests on Dry Matter Yield and Nutritive Value in Alfalfa (Articles)

Doohong Min

American Journal of Plant Sciences Vol.7 No.8，June 17, 2016

DOI: 10.4236/ajps.2016.78118 2,616 Downloads 4,036 Views Citations
A Polynomial Algorithm of Optimum Cutting a Rectangle into Rectangles with Two Heights (Articles)

M. Z. Arslanov

American Journal of Operations Research Vol.4 No.1，January 23, 2014

DOI: 10.4236/ajor.2014.41003 4,030 Downloads 5,888 Views Citations
Flash microbiocide: A Rapid and Economic Method for Determination of MBC and MFC (Articles)

Camila Hernandes, Juliana da Silva Coppede, Bianca Waléria Bertoni, Suzelei de Castro França, Ana Maria Soares Pereira

American Journal of Plant Sciences Vol.4 No.4，April 17, 2013

DOI: 10.4236/ajps.2013.44104 5,236 Downloads 7,877 Views Citations
Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling (Articles)

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210097 8,006 Downloads 15,419 Views Citations
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9，September 23, 2011

DOI: 10.4236/eng.2011.39114 5,285 Downloads 9,162 Views Citations
Elucidation on Reactions Thermodynamics and Kinetics of OFC-A of Steels (Articles)

A.V. Adedayo

J. of Minerals and Materials Characterization and Eng. Vol.9 No.7，July 20, 2010

DOI: 10.4236/jmmce.2010.97043 3,660 Downloads 5,101 Views Citations
Evaluating the Impacts of Forest Clear Cutting on Water and Sediment Yields Using SWAT in Mississippi (Articles)

Sunita Khanal, Prem B. Parajuli

Journal of Water Resource and Protection Vol.5 No.4，April 25, 2013

DOI: 10.4236/jwarp.2013.54047 5,680 Downloads 10,316 Views Citations
Identifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis (Articles)

M. M. Reddy, S. R. Kostka, N. S. Reddy

J. of Surface Engineered Materials and Advanced Technology Vol.10 No.3，July 12, 2020

DOI: 10.4236/jsemat.2020.103004 418 Downloads 1,125 Views Citations
The Biology of Szelenyiopria talitae (Hymenoptera: Diapriidae): Larval Parasitoid of the Leaf-Cutting Ant Acromyrmex subterraneus (Hymenoptera: Formicidae) (Articles)

Thalles Cardoso Mattoso, Denise Delores Oliveira Moreira, Thais Berçot Pontes Teodoro, Claudio Luiz Moreira de Souza, Rita de Kássia Guarnier da Silva, Veronica de Morais, Carlos Peres Silva, Milton Erthal Jr., Richard Ian Samuels

Advances in Entomology Vol.9 No.3，July 26, 2021

DOI: 10.4236/ae.2021.93012 328 Downloads 1,105 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies