Drawn Steel; Recovery; Recrystallization; Microstructure; Hardness; Soaking Time - Articles

Recrystallization Kinetics and Microstructure Evolution of Annealed Cold-Drawn Low-Carbon Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Journal of Crystallization Process and Technology Vol.3 No.4，October 31, 2013

DOI: 10.4236/jcpt.2013.34025 6,834 Downloads 10,868 Views Citations
Effect of Soaking Time on the Mechanical Properties of Annealed Cold-Drawn Low Carbon Steel (Articles)

Nurudeen Adekunle Raji, Oluleke Olugbemiga Oluwole

Materials Sciences and Applications Vol.3 No.8，August 22, 2012

DOI: 10.4236/msa.2012.38072 16,641 Downloads 23,524 Views Citations
Optimization of the Annealing Parameters for Improved Tensile Properties in Cold Drawn 0.12 wt% C Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Engineering Vol.5 No.11，November 6, 2013

DOI: 10.4236/eng.2013.511106 3,221 Downloads 4,714 Views Citations
Thermomechanical Behavior Modeling of a Cr-Ni-Mo-Mn-N Austenitic Stainless Steel (Articles)

Rafael P. Ferreira, Eden S. Silva, Carmem C. F. Nascimento, Samuel F. Rodrigues, Clodualdo Aranas Jr., Valdemar S. Leal, Gedeon S. Reis

Materials Sciences and Applications Vol.7 No.12，December 13, 2016

DOI: 10.4236/msa.2016.712062 1,600 Downloads 3,144 Views Citations
Structural Evolution and Properties of Hot Rolled Steel Alloys (Articles)

Emmanuel Isaac Akpan, Idoko Andrew Haruna

J. of Minerals and Materials Characterization and Eng. Vol.11 No.4，April 20, 2012

DOI: 10.4236/jmmce.2012.114029 7,543 Downloads 9,575 Views Citations
Effect of Shakeout Time on Microstructure and Hardness Properties of Grey Cast Iron (Articles)

Saliu Ojo Seidu, Daniel Toyin Oloruntoba, Iyiola Olatunji Otunniyi

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 30, 2014

DOI: 10.4236/jmmce.2014.24039 3,865 Downloads 4,892 Views Citations
Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel (Articles)

S. Aribo, K.K. Alaneme, D.O. Folorunso, F.O. Aramide

J. of Minerals and Materials Characterization and Eng. Vol.9 No.2，February 20, 2010

DOI: 10.4236/jmmce.2010.92014 7,531 Downloads 10,746 Views Citations
Hydrodynamic Modelling, Thermodynamic and Textural Variations during Common Beans Soaking (Articles)

E. M. Kwofie, O. I. Mba, M. Ngadi

Advances in Chemical Engineering and Science Vol.9 No.1，January 4, 2019

DOI: 10.4236/aces.2019.91003 815 Downloads 1,545 Views Citations
On the Pre-Forging Heating Methods for AA2014 Alloy (Articles)

Richard Turner, William Turner, Hao Wu

World Journal of Engineering and Technology Vol.11 No.4，November 27, 2023

DOI: 10.4236/wjet.2023.114059 78 Downloads 343 Views Citations
Quasi In-Situ Study on Microstructure Evolution of Al 2014 Alloy during Thermal Deformation and Following Solution Treatment (Articles)

Hailong Cao, Yuxing Tian, Ningjie Gu, Lifang Chen, Cheng Liu

Journal of Materials Science and Chemical Engineering Vol.7 No.8，August 12, 2019

DOI: 10.4236/msce.2019.78004 686 Downloads 1,281 Views Citations
Effects of Variation of Some Process Variables on Recrystallization Rate of Aluminium Alloy (6063) (Articles)

O.E. Olorunniwo, P.O. Atanda, K.J. Akinluwade

J. of Minerals and Materials Characterization and Eng. Vol.8 No.1，January 20, 2009

DOI: 10.4236/jmmce.2009.81001 5,849 Downloads 8,012 Views Citations
Development of an In-Situ Composite Doped Coating for Corrosion Protection and Mechanical Properties Enhancements in Process Engineering (Articles)

Oluwasegun T. Joshua, Ojo S. I. Fayomi, Enejoh T. Omeje

J. of Minerals and Materials Characterization and Eng. Vol.7 No.4，July 22, 2019

DOI: 10.4236/jmmce.2019.74013 555 Downloads 1,297 Views Citations
Annealing Heat Treatment Effects on Steel Welds (Articles)

A.V. Adedayo, S.A. Ibitoye, O.A. Oyetoyan

J. of Minerals and Materials Characterization and Eng. Vol.9 No.6，June 20, 2010

DOI: 10.4236/jmmce.2010.96039 10,827 Downloads 16,588 Views Citations
Tempering Heat Treatment Effects on Steel Welds (Articles)

A.V. Adedayo, S.A. Ibitoye, O.O. Oluwole

J. of Minerals and Materials Characterization and Eng. Vol.10 No.8，June 27, 2011

DOI: 10.4236/jmmce.2011.108059 7,226 Downloads 9,465 Views Citations
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites (Articles)

Hillol Joardar, Goutam Sutradhar, Nitai Sundar Das

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110100 5,846 Downloads 7,645 Views Citations
Effect of Silicon Additions on the Wear Properties of Grey Cast Iron (Articles)

Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie

J. of Minerals and Materials Characterization and Eng. Vol.1 No.2，March 29, 2013

DOI: 10.4236/jmmce.2013.12012 8,873 Downloads 13,206 Views Citations
Synthesis and Densification of Tungsten-Brass Composite by Mechanical Alloying (Articles)

Kahtan S. Mohammed, Baba Gowon, Shamsul Baharin Bin Jamaluddin, Zuhailawati Hussain, Polycarp Evarastics

Open Journal of Metal Vol.5 No.3，September 1, 2015

DOI: 10.4236/ojmetal.2015.53004 3,955 Downloads 4,959 Views Citations
Comparative Study on Conventional Sintering with Microwave Sintering and Vacuum Sintering of Y₂O₃-Al₂O₃-ZrO₂ Ceramics (Articles)

Mayur Shukla, Sumana Ghosh, Nandadulal Dandapat, Ashis K. Mandal, Vamsi K. Balla

Journal of Materials Science and Chemical Engineering Vol.4 No.2，February 17, 2016

DOI: 10.4236/msce.2016.42008 4,595 Downloads 6,713 Views Citations
Metallurgical Analysis of Brake Blocks (Articles)

Mathioro Fall, Fadel Niang, Olivier Hubert, Mamadou Babacar Ndiaye

Open Journal of Metal Vol.7 No.1，March 29, 2017

DOI: 10.4236/ojmetal.2017.71001 1,489 Downloads 2,550 Views Citations
Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds (Articles)

J. O. Olawale, S. A. Ibitoye, K.M. Oluwasegun, M. D. Shittu, R. C. Ofoezie

J. of Minerals and Materials Characterization and Eng. Vol.11 No.9，September 25, 2012

DOI: 10.4236/jmmce.2012.119084 8,430 Downloads 12,250 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies