Department of Mechanical Engineering, University of Lagos, Nigeria - Articles

Flow and Heat Transfer of a Dusty Williamson MHD Nanofluid Flow over a Permeable Cylinder in a Porous Medium (Articles)

Oluranti Adejoke Adekanmbi-Akinseye, Olugbenga John Fenuga, Hamzat Afe Isede, Musibau Gbeminiyi Sobamowo

Open Journal of Fluid Dynamics Vol.14 No.2，June 24, 2024

DOI: 10.4236/ojfd.2024.142005 62 Downloads 403 Views Citations
Evaluating the Structural Integrity of Fibreglass for the Manufacture of Headgears (Articles)

Olusegun A. Adefuye, Nurudeen A. Raji, Rafiu O. Kuku, Timothy Oyetade, Ridwan O. Ola-Gbadamosi

Modern Mechanical Engineering Vol.11 No.2，May 26, 2021

DOI: 10.4236/mme.2021.112002 267 Downloads 1,414 Views Citations
Design Analysis of Bevel Gear for Gearmotor Selection in Revolving Platform (Articles)

Nurudeen A. Raji, Kasali A. Adedeji, Elkanah O. Oyetunji, Ayodeji D. Agbelusi

Modern Mechanical Engineering Vol.11 No.1，February 26, 2021

DOI: 10.4236/mme.2021.111001 1,328 Downloads 4,313 Views Citations
Development of a Strategic Planning Model for a Municipal Water Supply Scheme Using System Dynamics (Articles)

Adelere E. Adeniran, Olufemi A. Bamiro

Journal of Water Resource and Protection Vol.7 No.15，October 15, 2015

DOI: 10.4236/jwarp.2015.715097 3,336 Downloads 4,714 Views Citations
Effects of Graphite Additions and Heat Treatment on the Microstructure, Mechanical and Tribological Properties of 13% Chromium White Iron (Articles)

J. O. Agunsoye, S. A. Bello, I. O. Awe, A. A. Yekinni, R. G. Adeyemo, A. O. Ologunagba

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 10, 2014

DOI: 10.4236/jmmce.2014.24032 2,691 Downloads 3,759 Views Citations
Heat Characteristics and Viscous Flow in a Moving Isothermal Cylindrical Duct with Nanoparticles (Articles)

Emmanuel O. Sangotayo, Kasali A. Adedeji, Joel Ovo Ogidiga

Journal of Applied Mathematics and Physics Vol.11 No.8，August 24, 2023

DOI: 10.4236/jamp.2023.118151 67 Downloads 270 Views Citations
Mechanical Properties of Iron Ore Tailings Filled-Polypropylene Composites (Articles)

S. M. Adedayo, M. A. Onitiri

J. of Minerals and Materials Characterization and Eng. Vol.11 No.7，July 25, 2012

DOI: 10.4236/jmmce.2012.117051 7,673 Downloads 10,043 Views Citations
Optimization of Thermal and Electrical Appliance Loads in Residential and Commercial Buildings with Demand Side Monitoring (Articles)

Emmanuel O. B. Ogedengbe

Smart Grid and Renewable Energy Vol.4 No.7A，October 4, 2013

DOI: 10.4236/sgre.2013.47A003 6,422 Downloads 9,144 Views Citations
This article belongs to the Special Issue on Fuel Cell
Performance of a 270 MW Gas Power Plant Using Exergy and Heat Rate (Articles)

D. A. Aderibigbe, G. Osunbor

Energy and Power Engineering Vol.11 No.2，February 21, 2019

DOI: 10.4236/epe.2019.112002 1,177 Downloads 2,791 Views Citations
Variational Iteration Method Solutions for Certain Thirteenth Order Ordinary Differential Equations (Articles)

Tunde A. Adeosun, Olugbenga J. Fenuga, Samuel O. Adelana, Abosede M. John, Ogunjimi Olalekan, Kazeem B. Alao

Applied Mathematics Vol.4 No.10，October 4, 2013

DOI: 10.4236/am.2013.410190 5,382 Downloads 8,183 Views Citations
Energy Audit of a Brewery—A Case Study of Vitamalt Nig. Plc, Agbara (Articles)

Olugbenga Olanrewaju Noah, Albert Imuentinyan Obanor, Mohammed Luqman Audu

Energy and Power Engineering Vol.4 No.3，May 14, 2012

DOI: 10.4236/epe.2012.43019 6,912 Downloads 12,208 Views Citations
A New Space-Time CE/SE Numerical Tracking of Contaminant Transport in Fractured Stratified Geologic Profiles (Articles)

Theophilus Akinfenwa Fashanu, Vincent Olusegun Sowemimo Olunloyo

Computational Water, Energy, and Environmental Engineering Vol.3 No.1，December 11, 2013

DOI: 10.4236/cweee.2014.31002 3,265 Downloads 5,841 Views Citations
Fabrication of End Quenched Machine: Hardenability Evaluation (Articles)

A. A. Yekinni, J. O. Agunsoye, S. A. Bello, I. O. Awe, S. I. Talabi

J. of Minerals and Materials Characterization and Eng. Vol.2 No.2，March 14, 2014

DOI: 10.4236/jmmce.2014.22014 5,585 Downloads 7,923 Views Citations
Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings (Articles)

Ezenwanyi Fidelia Ochulor, Samson Oluropo Adeosun, Mohammed Olawale Hakeem Amuda, Sanmbo Adewale Balogun

J. of Minerals and Materials Characterization and Eng. Vol.3 No.2，March 16, 2015

DOI: 10.4236/jmmce.2015.32012 4,795 Downloads 6,245 Views Citations
Efficiency of Energy Utilisation in a Nigeria Sausage Producing Factory (Articles)

Mufutau Adekojo Waheed, Peter Olaitan Aiyedun, Wasiu Oyediran Adedeji, Adekunle Adedapo Obisanya, Semiu Taiwo Amosun, Adeniyi Oluwole Adesina

Journal of Power and Energy Engineering Vol.5 No.12，December 28, 2017

DOI: 10.4236/jpee.2017.512012 837 Downloads 1,729 Views Citations
Energy-Exergy Analysis and Carbon (IV) Oxide Emission of an Aluminium Extrusion Plant in Nigeria (Articles)

Mufutau Adekojo Waheed, Peter Olaitan Aiyedun, Wasiu Oyediran Adedeji, Adekunle Adedapo Obisanya, Semiu Taiwo Amosun, Adeniyi Oluwole Adesina

Engineering Vol.9 No.12，December 29, 2017

DOI: 10.4236/eng.2017.912062 950 Downloads 1,913 Views Citations
Achieving Sustainable Development in Small Communities via Combined Heat and Power Systems (Articles)

Olaosebikan A. Olafadehan, Lukumon Salami, Babatunde K. Adeoye, Toluwalase O. Ajayi

Engineering Vol.4 No.3，March 31, 2012

DOI: 10.4236/eng.2012.43021 4,802 Downloads 7,899 Views Citations
Physico-Mechanical Responses of Polypropylene-CaCO₃ Composite (Articles)

Samson Oluropo Adeosun, Mohammed Awwalu Usman, Wasiu Ajibola Ayoola, Muyideen Adebayo Bodud

J. of Minerals and Materials Characterization and Eng. Vol.1 No.4，July 10, 2013

DOI: 10.4236/jmmce.2013.14025 5,992 Downloads 8,961 Views Citations
Mathematical Modelling of Sterile Insect Technology for Mosquito Control (Articles)

Regina Jijoho Patinvoh, Alfred Akpoveta Susu

Advances in Entomology Vol.2 No.4，October 13, 2014

DOI: 10.4236/ae.2014.24027 3,985 Downloads 5,955 Views Citations
Mechanical and Microstructural Evaluation of Plastically Deformed Brass (Articles)

Muideen Adebayo Bodude, Ibrahim Momohjimoh, Ruth Nkiruka Nnaji

Materials Sciences and Applications Vol.6 No.12，December 21, 2015

DOI: 10.4236/msa.2015.612112 6,096 Downloads 7,292 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies