Taguchi Methods - Articles - Scientific Research Publishing

What can Software Engineers Learn from Manufacturing to Improve Software Process and Product? (Articles)

Norman SCHNEIDEWIND

Intelligent Information Management Vol.1 No.2，November 30, 2009

DOI: 10.4236/iim.2009.12015 5,347 Downloads 9,440 Views Citations
Selection of Best Materials and Parametric Optimization of Solar Parabolic Collector Using Fuzzy Logic (Articles)

Sri P. Mohana Reddy, Pathi Venkataramaiah, Devuru Vishnu Vardhan Reddy

Energy and Power Engineering Vol.6 No.14，December 12, 2014

DOI: 10.4236/epe.2014.614046 3,819 Downloads 5,264 Views Citations
A New Model for Strategy Formulation Using Mahalanobis-Taguchi System and Clustering Algorithm (Articles)

Ali Hadighi, Iraj Mahdavi

Intelligent Information Management Vol.3 No.5，September 20, 2011

DOI: 10.4236/iim.2011.35024 5,111 Downloads 9,405 Views Citations
Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites - A Taguchi Approach (Articles)

S.R. Chauhan, Anoop Kumar, I. Singh, Prashant Kumar

J. of Minerals and Materials Characterization and Eng. Vol.9 No.4，April 20, 2010

DOI: 10.4236/jmmce.2010.94027 7,379 Downloads 10,766 Views Citations
Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis (Articles)

Suman Kalyan Das, Prasanta Sahoo

J. of Minerals and Materials Characterization and Eng. Vol.10 No.14，November 25, 2011

DOI: 10.4236/jmmce.2011.1014103 6,499 Downloads 8,874 Views Citations
Minimalization of Ash from Iranian Gilsonite by Froth Flotation (Articles)

Ramona Javadi Doodran, Shayan Khakmardan, Aref Shirazi, Adel Shirazy

J. of Minerals and Materials Characterization and Eng. Vol.9 No.1，December 23, 2020

DOI: 10.4236/jmmce.2021.91001 509 Downloads 2,343 Views Citations
Taguchi Optimization of Process Parameters in Friction Stir Welding of 6061 Aluminum Alloy: A Review and Case Study (Articles)

Mohamadreza Nourani, Abbas S. Milani, Spiro Yannacopoulos

Engineering Vol.3 No.2，March 18, 2011

DOI: 10.4236/eng.2011.32017 12,310 Downloads 26,191 Views Citations
Investigation and Optimization of Sn/Gr Lubricants Effects on Cold Extrudability of Fe-TiC Nanocomposite Using Taguchi Robust Design Method (Articles)

Seyed Abdolkarim Sajjadi, Seyed Mojtaba Zebarjad, Nasrin Sasani, Heydar Khadivi, Behrooz Naderi

Engineering Vol.3 No.7，July 20, 2011

DOI: 10.4236/eng.2011.37083 4,552 Downloads 7,968 Views Citations
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach (Articles)

S. Basavarajappa, K.V. Arun, J. Paulo Davim

J. of Minerals and Materials Characterization and Eng. Vol.8 No.5，May 20, 2009

DOI: 10.4236/jmmce.2009.85034 8,066 Downloads 11,692 Views Citations
Dry Sliding Wear Behaviour of Aluminium/Be₃Al₂(SiO₃)₆ Composite Using Taguchi Method (Articles)

H. B. Bhaskar, Abdul Sharief

J. of Minerals and Materials Characterization and Eng. Vol.11 No.7，July 25, 2012

DOI: 10.4236/jmmce.2012.117052 5,657 Downloads 8,401 Views Citations
Utilization of Industrial Waste Slag as Aggregate in Concrete Applications by Adopting Taguchi’s Approach for Optimization (Articles)

Mohammed Nadeem, Arun D. Pofale

Open Journal of Civil Engineering Vol.2 No.3，September 27, 2012

DOI: 10.4236/ojce.2012.23015 12,009 Downloads 22,438 Views Citations
Process Window Determination for Biofiltration by the Taguchi Method (Articles)

Man Chung Law, Hong Chua, Ka Po Cheng, Chi Wai Kan

Journal of Water Resource and Protection Vol.4 No.10，October 30, 2012

DOI: 10.4236/jwarp.2012.410095 3,583 Downloads 5,418 Views Citations
Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis (Articles)

Shouvik Ghosh, Prasanta Sahoo, Goutam Sutradhar

J. of Minerals and Materials Characterization and Eng. Vol.11 No.11，November 30, 2012

DOI: 10.4236/jmmce.2012.1111115 6,458 Downloads 10,693 Views Citations
An Application of the Taguchi Method (Robust Design) to Environmental Engineering: Evaluating Advanced Oxidative Processes in Polyester-Resin Wastewater Treatment (Articles)

Messias Borges Silva, Livia Melo Carneiro, João Paulo Alves Silva, Ivy dos Santos Oliveira, Hélcio José Izário Filho, Carlos Roberto de Oliveira Almeida

American Journal of Analytical Chemistry Vol.5 No.13，September 19, 2014

DOI: 10.4236/ajac.2014.513092 6,586 Downloads 8,882 Views Citations
Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM) (Articles)

Olawale Samuel Fatoba, Olaitan Lukman Akanji, Abiodun Samson Aasa

J. of Minerals and Materials Characterization and Eng. Vol.2 No.6，November 10, 2014

DOI: 10.4236/jmmce.2014.26058 4,382 Downloads 5,840 Views Citations
Reduction of Undercuts in Fillet Welded Joints Using Taguchi Optimization Method (Articles)

Joseph Achebo, Sule Salisu

J. of Minerals and Materials Characterization and Eng. Vol.3 No.3，May 12, 2015

DOI: 10.4236/jmmce.2015.33020 4,377 Downloads 5,191 Views Citations
Evaluation and Optimization of Tensile Strength Responses of Coir Fibres Reinforced Polyester Matrix Composites (CFRP) Using Taguchi Robust Design (Articles)

Ugochukwu Chuka Okonkwo, Christian Ebele Chukwunyelu, Bright Uchenna Oweziem, Okunzuwa Austine Ekuase

J. of Minerals and Materials Characterization and Eng. Vol.3 No.4，June 4, 2015

DOI: 10.4236/jmmce.2015.34025 3,265 Downloads 4,457 Views Citations
Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method (Articles)

Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah

J. of Minerals and Materials Characterization and Eng. Vol.3 No.4，June 10, 2015

DOI: 10.4236/jmmce.2015.34028 2,687 Downloads 3,582 Views Citations
Cymbal Structural Optimization for Improving Piezoelectric Harvesting Efficiency with Taguchi’s Orthogonal Experiment (Articles)

Guangqing Shang, Wei Ning, Chunhua Sun

Journal of Power and Energy Engineering Vol.3 No.10，October 29, 2015

DOI: 10.4236/jpee.2015.310002 3,624 Downloads 4,446 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 3,878 Downloads 6,700 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies