Rapid Solidification - Articles - Scientific Research Publishing

Effect of Heat Treatment on Mechanical Properties of Al-1.5Cu-9.5Zn-3Mg Rapidly Solidified Alloy (Articles)

El Said Gouda, Emad Makboul Ahmed, Nabih Lotfi Tawfik

Materials Sciences and Applications Vol.1 No.4，October 29, 2010

DOI: 10.4236/msa.2010.14031 5,526 Downloads 9,634 Views Citations
Martensitic Characterization of the Ti_45.3Ni_54.7 Melt Spun Alloy (Articles)

Geroge C. S. Anselmo, Walman Benicio de Castro, Carlos J. de Araújo

Materials Sciences and Applications Vol.2 No.9，September 20, 2011

DOI: 10.4236/msa.2011.29169 5,185 Downloads 8,612 Views Citations
The Role of Silver Additions in Formation of Sn-Bi-Ag Semiconductor Alloys by Rapid Solidification (Articles)

Tarek El Ashram

Materials Sciences and Applications Vol.6 No.3，March 10, 2015

DOI: 10.4236/msa.2015.63027 3,132 Downloads 4,003 Views Citations
Development of Nanostructure Formation of Fe_73.5Cu₁Nb₃Si_13.5B₉ Alloy from Amorphous State on Heat Treatment (Articles)

Md. Khalid Hossain, Jannatul Ferdous, Md. Manjurul Haque, A. K. M. Abdul Hakim

World Journal of Nano Science and Engineering Vol.5 No.4，November 13, 2015

DOI: 10.4236/wjnse.2015.54013 4,958 Downloads 5,932 Views Citations
The Role of Valence Electron Concentration on the Structure and Properties of Rapidly Solidified Sn-Ag Binary Alloys (Articles)

M. Kamal, A. B. El-Bediwi, T. El-Ashram, M. E. Dorgham

Materials Sciences and Applications Vol.3 No.3，March 23, 2012

DOI: 10.4236/msa.2012.33028 8,017 Downloads 11,422 Views Citations
Formation of Supersaturated Solid Solutions Bi-Ag and Bi-Zn by Rapid Solidification Using Melt Spinning Technique (Articles)

Tarek El-Ashram

Materials Sciences and Applications Vol.6 No.2，February 12, 2015

DOI: 10.4236/msa.2015.62021 3,664 Downloads 4,682 Views Citations
Heat Transfer Analysis during External Chilling of Composite Material Castings through Experimental and Finite Element (FE) Modelling (Articles)

Joel Hemanth

Modeling and Numerical Simulation of Material Science Vol.4 No.1，January 2, 2014

DOI: 10.4236/mnsms.2014.41001 5,275 Downloads 8,338 Views Citations
Simulation of Solidification Parameters during Zr Based Bulk Metallic Glass Matrix Composite’s (BMGMCs) Additive Manufacturing (Articles)

Muhammad Musaddique Ali Rafique

Engineering Vol.10 No.3，March 20, 2018

DOI: 10.4236/eng.2018.103007 1,094 Downloads 2,215 Views Citations
Modelling and Simulation of Solidification Phenomena during Additive Manufacturing of Bulk Metallic Glass Matrix Composites (BMGMC)—A Brief Review and Introduction of Technique (Articles)

Muhammad Musaddique Ali Rafique

Journal of Encapsulation and Adsorption Sciences Vol.8 No.2，June 25, 2018

DOI: 10.4236/jeas.2018.82005 1,767 Downloads 4,638 Views Citations
Microstructure, Mechanical Properties (Strength and Hardness) and Wear Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites (Articles)

Joel Hemanth, K. Arasukumar

Journal of Materials Science and Chemical Engineering Vol.7 No.7，July 23, 2019

DOI: 10.4236/msce.2019.77007 663 Downloads 1,970 Views Citations
Assessment of the Integrity and Retention of Chromium (VI) in Portland Cement Pastes (Articles)

Ferreira Raul Tadeu Lobato, Fortaleza Dário Batista, Amorim Kelly Aparecida da Encarnação, Lira Fernanda Silva, Silva Marizete Helena Pereira, Wagner Batista Santos

Advances in Chemical Engineering and Science Vol.11 No.1，November 30, 2020

DOI: 10.4236/aces.2021.111001 473 Downloads 1,543 Views Citations
Solidification and Structuresation of Instability Zones (Articles)

Evgeniy Alexseevich Lukashov, Evgeniy Vladimirovich Radkevich

Applied Mathematics Vol.1 No.3，September 29, 2010

DOI: 10.4236/am.2010.13021 4,398 Downloads 8,118 Views Citations
Effects of Using Fins and Carboceramics on the Solidification Characteristics of Aluminum Casting Alloys? (Articles)

Seyyed Mohammad Ali Boutorabi, Masoud Zandira

Materials Sciences and Applications Vol.2 No.7，July 29, 2011

DOI: 10.4236/msa.2011.27119 6,009 Downloads 9,667 Views Citations
Development of Mathematical Equation for Fraction of Solid in AlSi7Mg Alloy Solidification Simulation (Articles)

O.O. Oluwole, G.O. Oluwadare, A.A. Afonja

J. of Minerals and Materials Characterization and Eng. Vol.7 No.1，March 20, 2008

DOI: 10.4236/jmmce.2008.71006 5,997 Downloads 7,729 Views Citations
Preparation and Structural Characterization of Vanadium Doped Ni – B Binary Hard Alloys (Articles)

J. A. Ajao

J. of Minerals and Materials Characterization and Eng. Vol.9 No.6，June 20, 2010

DOI: 10.4236/jmmce.2010.96040 7,006 Downloads 8,576 Views Citations
Numerical Investigation of Bismuth Unloading Solidification with Abnormal Melting Characteristic (Articles)

Jingsong Bai, Jidong Yu, Tao Wang

World Journal of Mechanics Vol.4 No.7，July 11, 2014

DOI: 10.4236/wjm.2014.47021 3,103 Downloads 4,153 Views Citations
Fabrication and Corrosion Behaviour of Aluminium Alloy (LM-13) Reinforced with Nano-ZrO₂ Particulate Chilled Nano Metal Matrix Composites (CNMMCs) for Aerospace Applications (Articles)

Joel Hemanth, M. R. Divya

Journal of Materials Science and Chemical Engineering Vol.6 No.7，July 18, 2018

DOI: 10.4236/msce.2018.67015 1,323 Downloads 3,570 Views Citations
Education Gap in Japanese Social (Articles)

Qinyun Huang

Open Access Library Journal Vol.9 No.8，August 24, 2022

DOI: 10.4236/oalib.1109150 91 Downloads 964 Views Citations
Takotsubo Cardiomyopathy with a Dramatically Rapid Resolution (Articles)

Muhammad Alichaudhry, Chadi Dib, Ralph Lazzara

International Journal of Clinical Medicine Vol.2 No.2，May 27, 2011

DOI: 10.4236/ijcm.2011.22025 5,089 Downloads 8,775 Views Citations
Sensitivity of a Rapid Mix Test with Combined Synthetic Antigens Derived from Mycobacterium Leprae PGL-1 for Diagnosis and Surveillance of Leprosy (Articles)

Maria do Perpétuo Socorro Amador Silvestre, Maxwell Furtado de Lima, Antônio G. P. Pereira, Aline Rodrigues Bernardo, Rafaela Lopes Diniz, Pedro Paulo Ferreira Ribeiro, Edimílson Domingos da Silva, Luana Nepomuceno Gondim Costa Lima

Open Journal of Immunology Vol.10 No.1，January 31, 2020

DOI: 10.4236/oji.2020.101001 782 Downloads 1,610 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies