Bending Rate - Articles - Scientific Research Publishing

Study of Second-Order Continuities of a Composite Surface (Articles)

Yukun Liu, Yong Yue

Advances in Pure Mathematics Vol.10 No.1，January 16, 2020

DOI: 10.4236/apm.2020.101003 428 Downloads 963 Views Citations
Experimental Study of the Physical and Mechanical Behaviour of Mortar Formulations with Fine Sands of Recycled Glass (Articles)

Apedjinou Dodji Kplolanyo, Samah Essoavama Ouro-Djobo, Amey Kossi Bollanigni, Kassegne Komlan Assogba, Tiem Sonnou

Open Journal of Civil Engineering Vol.13 No.2，June 8, 2023

DOI: 10.4236/ojce.2023.132019 101 Downloads 479 Views Citations
The division and bending of green and red semiconductor laser light at the same time (Articles)

Remzi Yıldırım

Natural Science Vol.3 No.10，October 21, 2011

DOI: 10.4236/ns.2011.310114 4,445 Downloads 8,328 Views Citations
3-Point Bending of Bars and Rods Made of Materials Obeying a Ramberg-Osgood Criterion (Articles)

José Luis Lanzagorta, Antonio Martín-Meizoso

World Journal of Mechanics Vol.1 No.3，July 6, 2011

DOI: 10.4236/wjm.2011.13010 8,939 Downloads 15,800 Views Citations
Belt-Parallel Shortening in the Northern Apennines and Seismotectonic Implications (Articles)

Marcello Viti, Enzo Mantovani, Daniele Babbucci, Caterina Tamburelli, Nicola Cenni, Massimo Baglione, Vittorio D’Intinosante

International Journal of Geosciences Vol.6 No.8，August 31, 2015

DOI: 10.4236/ijg.2015.68075 3,803 Downloads 4,891 Views Citations
Numerical Investigation of Flexural Bending in Biaxial Braided Structures for Flexor Tendon Repair (Articles)

Jerry Ochola, Benny Malengier, Lieva Van Langenhove

Journal of Biomedical Science and Engineering Vol.13 No.6，June 11, 2020

DOI: 10.4236/jbise.2020.136009 401 Downloads 1,304 Views Citations
New Methods Testing of Adhesion of the Coating to Sheet Metal by Bending (Articles)

Milan Dvořák, Emil Schwarzer

J. of Surface Engineered Materials and Advanced Technology Vol.2 No.2，April 5, 2012

DOI: 10.4236/jsemat.2012.22011 7,149 Downloads 12,043 Views Citations
Effect of Stacking Fault Energy on the Mechanism of Texture Formation during Alternating Bending of FCC Metals and Alloys (Articles)

Natalia Shkatulyak

International Journal of Nonferrous Metallurgy Vol.2 No.2，April 18, 2013

DOI: 10.4236/ijnm.2013.22005 6,560 Downloads 10,673 Views Citations
Peridynamic Solutions for Timoshenko Beams (Articles)

E. Thomas Moyer, Michael J. Miraglia

Engineering Vol.6 No.6，May 26, 2014

DOI: 10.4236/eng.2014.66034 6,848 Downloads 9,049 Views Citations
Springback of I-Section Beam after Pure Bending with von Mises Criteria (Articles)

Reham Saleh, Gamal Ali, Abla El-Megharbel

World Journal of Engineering and Technology Vol.6 No.1，February 2, 2018

DOI: 10.4236/wjet.2018.61006 874 Downloads 1,799 Views Citations
Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics (Articles)

Donglian Tan

Engineering Vol.12 No.2，February 10, 2020

DOI: 10.4236/eng.2020.122008 629 Downloads 1,835 Views Citations
Bending Analysis of a Filament-Wound Composite Tube (Articles)

Gyula Szabó, Károly Váradi, Dávid Felhős

Modern Mechanical Engineering Vol.8 No.1，February 28, 2018

DOI: 10.4236/mme.2018.81005 1,719 Downloads 4,125 Views Citations
Structural Inversion and Behavioural Changes as a Function of Composition in Sr-La-Al-B-Si Based Glasses (Articles)

Prasanta Kumar Ojha, Sangram K. Rath, Tapas K. Chongdar, Nitin M. Gokhale, Ajit R. Kulkarni

New Journal of Glass and Ceramics Vol.1 No.2，July 21, 2011

DOI: 10.4236/njgc.2011.12004 5,895 Downloads 11,538 Views Citations
Tunable Bending Stiffness, Buckling Force, and Natural Frequency of Nanowires and Nanoplates (Articles)

Hanxing Zhu, Z. B. Wang, T. X. Fan, D. Zhang

World Journal of Nano Science and Engineering Vol.2 No.3，September 28, 2012

DOI: 10.4236/wjnse.2012.23021 5,062 Downloads 8,286 Views Citations
Evaluation of the Bending Loss of the Hollow Optical Fiber for Application of the Carbon Dioxide Laser to Endoscopic Therapy (Articles)

Daisuke Kusakari, Hisanao Hazama, Rinna Kawaguchi, Katsunori Ishii, Kunio Awazu

Optics and Photonics Journal Vol.3 No.4A，August 9, 2013

DOI: 10.4236/opj.2013.34A003 5,571 Downloads 7,818 Views Citations
This article belongs to the Special Issue on Infrared Technology and Applications
Numerical Investigation of the Effect of Process and Sheet Parameters on Bending Angle in the Laser Bending Process (Articles)

Mehdi Safari

World Journal of Mechanics Vol.4 No.4，April 9, 2014

DOI: 10.4236/wjm.2014.44011 5,085 Downloads 6,818 Views Citations
Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams (Articles)

Francesco Trentadue, Erika Mastromarino, Giuseppe Quaranta, Floriana Petrone, Giorgio Monti, Giuseppe Carlo Marano

Open Journal of Civil Engineering Vol.4 No.3，September 29, 2014

DOI: 10.4236/ojce.2014.43024 6,423 Downloads 8,890 Views Citations
Sheet Bending Deformation in Production of Thin-Walled Pipes (Articles)

Tatjana V. Brovman

World Journal of Mechanics Vol.4 No.12，December 22, 2014

DOI: 10.4236/wjm.2014.412035 2,808 Downloads 3,507 Views Citations
Nonlinear Bending of Piezoelectric Cylindrical Shell Reinforced with BNNTs under Electro-Thermo-Mechanical Loadings (Articles)

Jinhua Yang, Pengjun Zhang

Materials Sciences and Applications Vol.6 No.8，August 7, 2015

DOI: 10.4236/msa.2015.68076 2,619 Downloads 3,414 Views Citations
Experiments with Forming Coated Sheets with Plasma-Chemical Pretreatment of the Surface (Articles)

Emil Schwarzer, Milan Dvořák

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.3，June 30, 2016

DOI: 10.4236/jsemat.2016.63011 1,754 Downloads 2,529 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies