Electric Discharge Machining; Material Removal Rate; Electrode Wear; Surface Roughness; Stainless Steel - Articles

Stress Evaluation at the Maximum Strained State by EBSD and Several Residual Stress Measurements for Plastic Deformed Austenitic Stainless Steel (Articles)

Yohei Sakakibara, Keiji Kubushiro

World Journal of Mechanics Vol.7 No.8, August 18, 2017

DOI: 10.4236/wjm.2017.78018 1,907 Downloads 4,379 Views Citations
Comparison of Aggressiveness Behavior of Chloride and Iodide Solutions on 304 and 304L Stainless Steel Alloys (Articles)

Shaymaa Mahdi Salih, Ibtehal K. Shakir, Abdulkareem M. A. Al-Sammarraie

Materials Sciences and Applications Vol.8 No.12, November 16, 2017

DOI: 10.4236/msa.2017.812065 1,350 Downloads 4,246 Views Citations
Literature Review of Phase Transformations and Cavitation Erosion of Duplex Stainless Steels (Articles)

Wenji Ai, Shanshui Zheng, Xianfeng Zeng, Huibing Cheng

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112002 455 Downloads 1,075 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7, July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,230 Downloads 2,501 Views Citations
Further Study of Electric Dust Removal with Transparent Fork Electrodes (Articles)

Guangming Wu, Dan Li, Jianxiang Yu, Tianlan Yin, Dongdong Feng

American Journal of Analytical Chemistry Vol.6 No.3, January 30, 2015

DOI: 10.4236/ajac.2015.63018 3,680 Downloads 4,859 Views Citations
Vegetable and Mineral Used Oils as Cutting Fluids: Effect on Surface Roughness of Aluminum Alloy (Articles)

Nabeel Gharaibeh

Journal of Surface Engineered Materials and Advanced Technology Vol.6 No.4, October 12, 2016

DOI: 10.4236/jsemat.2016.64016 3,526 Downloads 6,937 Views Citations
Fabrication of Micro Structures by Ultrashort Voltage Pulse Electrical Discharge Machining (Articles)

Chenxue Wang, Weiyu He, Yan Xiao

Journal of Minerals and Materials Characterization and Engineering Vol.6 No.2, March 26, 2018

DOI: 10.4236/jmmce.2018.62017 1,394 Downloads 3,306 Views Citations
Electrochemical Investigation of Corrosion on AISI 316 Stainless Steel and AISI 1010 Carbon Steel: Study of the Behaviour of Imidazole and Benzimidazole as Corrosion Inhibitors (Articles)

Roberta R. Moreira, Thiago F. Soares, Josimar Ribeiro

Advances in Chemical Engineering and Science Vol.4 No.4, October 16, 2014

DOI: 10.4236/aces.2014.44052 7,793 Downloads 10,246 Views Citations
Influence of Laser-Induced Bubble Formation on Laser Chemical Machining (Articles)

Marcel Simons, Tim Radel, Raj Shanta Kajsaravally, Frank Vollertsen

Journal of Surface Engineered Materials and Advanced Technology Vol.10 No.2, March 20, 2020

DOI: 10.4236/jsemat.2020.102002 703 Downloads 1,885 Views Citations
Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining (Articles)

V. Senthilkumar, K. Lenin

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.5, April 20, 2011

DOI: 10.4236/jmmce.2011.105034 6,623 Downloads 8,223 Views Citations
Determination of the Friction Coefficient in the Flat Strip Drawing Test (Articles)

Anvar Makhkamov

Engineering Vol.13 No.11, November 29, 2021

DOI: 10.4236/eng.2021.1311043 359 Downloads 1,878 Views Citations
Effect of Nitriding Current Density on the Surface Properties and Crystallite Size of Pulsed Plasma-Nitrided AISI 316L (Articles)

J. C. Díaz-Guillén, E. E. Granda-Gutiérrez, G. Vargas-Gutiérrez, M. R. Díaz-Guillén, J. A. Aguilar-Martínez, L. Álvarez-Contreras

Journal of Materials Science and Chemical Engineering Vol.3 No.1, January 20, 2015

DOI: 10.4236/msce.2015.31007 4,558 Downloads 6,200 Views Citations
Effect of Nitriding on Wear Behavior of Graphite Reinforced Aluminum Alloy Composites (Articles)

Bhujang Mutt Girish, Bhujang Mutt Satish, Hanyalu Ramegowda Vitala

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.2, July 21, 2011

DOI: 10.4236/jsemat.2011.12011 5,177 Downloads 10,303 Views Citations
A Contact Model for Establishment of Hip Joint Implant Wear Metrics (Articles)

Mohammad Hodaei, Kambiz Farhang, Nazanin Maani

Journal of Biomedical Science and Engineering Vol.7 No.4, March 20, 2014

DOI: 10.4236/jbise.2014.74026 5,422 Downloads 8,506 Views Citations
Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel (Articles)

Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1, January 16, 2017

DOI: 10.4236/msce.2017.51013 4,209 Downloads 6,475 Views Citations
Airborne particles and asthma: a biophysical model (Articles)

Ming Yang, Yixing Wang

Health Vol.1 No.4, December 31, 2009

DOI: 10.4236/health.2009.14054 5,375 Downloads 9,845 Views Citations
The Effects of Porcelain Polishing Techniques on the Color and Surface Texture of Different Porcelain Systems (Articles)

Ali Riza Tuncdemir, Erhan Dilber, Haluk Baris Kara, A. Nilgun Ozturk

Materials Sciences and Applications Vol.3 No.5, May 22, 2012

DOI: 10.4236/msa.2012.35043 5,434 Downloads 9,702 Views Citations
Effect of Surface Roughness and Materials Composition (Articles)

Maryam Gharechahi, Horieh Moosavi, Maryam Forghani

Journal of Biomaterials and Nanobiotechnology Vol.3 No.4A, October 31, 2012

DOI: 10.4236/jbnb.2012.324056 10,933 Downloads 18,101 Views Citations
This article belongs to the Special Issue on Bacterial Biofilms and Surface Interactions
The effect of sand-blasting and hydrofluoric acid etching on Ti CP2 and Ti CP4 surface topography (Articles)

Tullio Monetta, Francesco Bellucci

Open Journal of Regenerative Medicine Vol.1 No.3, December 28, 2012

DOI: 10.4236/ojrm.2012.13007 6,078 Downloads 11,490 Views Citations
Analysis of Microdisk/Microring’s Surface Roughness Effect by Orthogonal Decomposition (Articles)

Chengle Sui, Qiangmin Wang, Shilin Xiao, Pingqing Li

Optics and Photonics Journal Vol.3 No.2B, July 23, 2013

DOI: 10.4236/opj.2013.32B068 3,116 Downloads 4,920 Views Citations

First <...234 ...>Last

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies