Boundary Roughness - Articles - Scientific Research Publishing

Sundarban as a Buffer against Storm Surge Flooding (Articles)

Mohiuddin Sakib, Fatin Nihal, Anisul Haque, Munsur Rahman, Mansur Ali

World Journal of Engineering and Technology Vol.3 No.3C，October 22, 2015

DOI: 10.4236/wjet.2015.33C009 5,487 Downloads 8,291 Views Citations
Comparison of One-Step and Multistep Polishing Systems for the Surface Roughness of Resin Composites (Articles)

Ismail Hakkı Baltacıoğlu, Ozgur Irmak, Nuran Ulusoy, Esra Cengiz, Yıldırım Hakan Bağış

Open Journal of Stomatology Vol.6 No.3，March 22, 2016

DOI: 10.4236/ojst.2016.63009 3,325 Downloads 5,832 Views Citations
Effect of Different Acidic Agents on Surface Roughness of Feldspathic Porcelain (Articles)

Zeynep Yesil Duymus, Alper Ozdogan, Hamza Ulu

Open Journal of Stomatology Vol.6 No.3，March 30, 2016

DOI: 10.4236/ojst.2016.63011 2,440 Downloads 3,562 Views Citations
A Comparative Assessment of the Surface Roughness of Thermoplastic Denture Base Resins Following Adjustment and Re-Polishing (Articles)

Shivaughn M. Marchan, Anna Kay Bishop, William A. J. Smith, Paul Seerattan, David Hinds

Open Journal of Stomatology Vol.7 No.4，April 30, 2017

DOI: 10.4236/ojst.2017.74019 1,636 Downloads 3,035 Views Citations
The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test (Articles)

Mohammad S. Alsoufi, Tahani M. Bawazeer, Mohammed W. Alhazmi, Sufyan Azam

Materials Sciences and Applications Vol.8 No.7，July 3, 2017

DOI: 10.4236/msa.2017.87036 1,224 Downloads 3,627 Views Citations
Nose-Tip Transition Control by Surface Roughness on a Hypersonic Sphere (Articles)

Kiran Joy Irimpan, Viren Menezes, K. Srinivasan, Hamid Hosseini

Journal of Flow Control, Measurement & Visualization Vol.6 No.3，June 29, 2018

DOI: 10.4236/jfcmv.2018.63011 1,068 Downloads 2,474 Views Citations
Characterization of Flow Structures Induced by Highly Rough Surface Using Particle Image Velocimetry, Proper Orthogonal Decomposition and Velocity Correlations (Articles)

L. R. Andersson, I. A. S. Larsson, J. G. I. Hellström, P. Andreasson, A. G. Andersson, T. S. Lundström

Engineering Vol.10 No.7，July 12, 2018

DOI: 10.4236/eng.2018.107028 902 Downloads 2,265 Views Citations
Polydopamine Coating on Titanium Affects Osteoblastic Differentiation to a Greater Degree than Does Surface Roughness (Articles)

Seyed Mohsen Latifi, Ravi Shankar, Henry J. Donahue

Advances in Materials Physics and Chemistry Vol.10 No.12，December 31, 2020

DOI: 10.4236/ampc.2020.1012027 508 Downloads 1,499 Views Citations
Enhanced Transport of Overdamped Particles in a Disordered Biased Periodic Potential (Articles)

Meng Hu

Journal of Modern Physics Vol.13 No.8，August 15, 2022

DOI: 10.4236/jmp.2022.138067 154 Downloads 622 Views Citations
This article belongs to the Special Issue on Statistical Physics and Nonlinear Phenomena
Finite Element Analysis with Paraxial & Viscous Boundary Conditions for Elastic Wave Propagation (Articles)

Hee Seok Kim

Engineering Vol.4 No.12，December 26, 2012

DOI: 10.4236/eng.2012.412107 4,622 Downloads 7,109 Views Citations
On the Improvement of Wind Power Predictions Based on Terrain Characteristics and Measurements of the Annual Energy Production (Articles)

Jonathan Dorval, Christian Masson, Yves Gagnon

Journal of Flow Control, Measurement & Visualization Vol.5 No.1，February 9, 2017

DOI: 10.4236/jfcmv.2017.51001 1,949 Downloads 3,476 Views Citations
This article belongs to the Special Issue on Applications to Wind Energy
Influence of Cutting Speed, Feed Rate and Bulk Texture on the Surface Finish of Nitrogen Alloyed Duplex Stainless Steels during Dry Turning (Articles)

D. Philip Selvaraj, P. Chandramohan

Engineering Vol.2 No.6，July 1, 2010

DOI: 10.4236/eng.2010.26059 9,032 Downloads 15,977 Views Citations
Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant (Articles)

Jeong-Du Kim, Keon-Beom Lee

Engineering Vol.2 No.10，November 29, 2010

DOI: 10.4236/eng.2010.210101 6,268 Downloads 10,722 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 3,959 Downloads 6,263 Views Citations
Relative Depth Effects on Corrugated Culvert Roughness (Articles)

Jonathan Scott Toews, Shawn Paul Clark

Journal of Water Resource and Protection Vol.4 No.10，October 30, 2012

DOI: 10.4236/jwarp.2012.410096 4,345 Downloads 6,551 Views Citations
Evaluation of a Simple Hydraulic Resistance Model Using Flow Measurements Collected in Vegetated Waterways (Articles)

Fredrik Huthoff, Menno W. Straatsma, Denie C. M. Augustijn, Suzanne J. M. H. Hulscher

Open Journal of Modern Hydrology Vol.3 No.1，January 28, 2013

DOI: 10.4236/ojmh.2013.31005 4,339 Downloads 7,987 Views Citations
Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool (Articles)

Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi

Modern Mechanical Engineering Vol.4 No.1，December 30, 2013

DOI: 10.4236/mme.2014.41001 7,505 Downloads 15,267 Views Citations
A Contact Model for Establishment of Hip Joint Implant Wear Metrics (Articles)

Mohammad Hodaei, Kambiz Farhang, Nazanin Maani

Journal of Biomedical Science and Engineering Vol.7 No.4，March 20, 2014

DOI: 10.4236/jbise.2014.74026 5,316 Downloads 8,193 Views Citations
Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO₂ Coating on Commercially Pure Ti Discs (Articles)

Sinem Yeniyol, Bahadır Kepenek, Ayhan Bilir, Ali Fuat Çakır, Nilüfer Bölükbaşı, Mefail Yeniyol, Tayfun Özdemir

Materials Sciences and Applications Vol.5 No.5，March 31, 2014

DOI: 10.4236/msa.2014.55029 3,400 Downloads 5,336 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7，July 8, 2014

DOI: 10.4236/msce.2014.27004 2,478 Downloads 3,944 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies